Buried-Interface Engineering of Conformal 2D/3D Perovskite Heterojunction for Efficient Perovskite/Silicon Tandem Solar Cells on Industrially Textured Silicon

Tailored Polymer Hole-Transporting Materials with Multisite Passivation Functions for Effective Buried-Interface Engineering of Inverted Quasi-2D Perovskite Solar Cells

Although quasi-2D Ruddlesden‒Popper (RP) perovskite exhibits advantages in stability, their photovoltaic performance are still inferior to 3D counterparts. Optimizing the buried interface of RP perovskite and suppress energetic losses can be a promising approach for enhancing efficiency and stability of inverted quasi-2D RP perovskite solar cells (PSCs). Among which, constructing polymer hole-transporting materials (HTMs) with defect passivation functions is of great significance for buried-interface engineering of inverted quasi-2D RP PSCs. Herein, by employing side-chain tailoring strategy to extend the π-conjugation and regulate functionality of side-chain groups, target polymer HTMs (PVCz-ThSMeTPA and PVCz-ThOMeTPA) with high mobility and multisite passivation functions are achieved. The presence of more sulfur atom-containing groups in side-chain endows PVCz-ThSMeTPA with increased intra/intermolecular interaction, appropriate energy level, and enhanced buried interfacial interactions with quasi-2D RP perovskite. The hole mobility of PVCz-ThSMeTPA is up to 9.20 × 10-4 cm2 V-1 S-1. Furthermore, PVCz-ThSMeTPA as multifunctional polymer HTM with multiple chemical anchor sites for buried-interface engineering of quasi-2D PSCs can enable effective charge extraction, defects passivation, and perovskite crystallization modulation. Eventually, the PVCz-ThSMeTPA-based inverted quasi-2D PSC achieves a champion power conversion efficiency of 22.37%, which represents one of the highest power conversion efficiencies reported to date for quasi-2D RP PSCs.

Regulation of Wide Bandgap Perovskite by Rubidium Thiocyanate for Efficient Silicon/Perovskite Tandem Solar Cells

Developing high-quality wide bandgap (WBG) perovskites with ≈1.7 eV bandgap (Eg) is critical to couple with silicon and create efficient silicon/perovskite tandem devices. The sufferings of large open-circuit voltage (VOC) loss and unstable power output under operation continuously highlight the criticality to fully develop high-quality WBG perovskite films. In this study, rubidium and thiocyanate as additive regulators in WBG perovskites are incorporated, significantly reducing non-radiative recombination, ion-migration, and phase segregation. The optimized 1.66 eV Eg perovskite solar cells achieved state-of-art 1.3 V VOC (0.36 V deficit), and delivered a stabilized power conversion efficiency of 24.3%, along with good device stability (20% degradation (T80) after over 994 h of operation under 1 sun at ≈65°C). When integrated with a flat front side silicon cell, silicon/perovskite two-terminal tandem device (30% efficient) is obtained with a 1.97 V VOC, and T90 operational lifetime of more than 600 h at room temperature.

Imaging Locally Inhomogeneous Properties of Metal Halide Perovskites

Metal halide perovskites (MHPs) are a perfect example of state-of-the-art photovoltaic materials whose compositional and structural diversity, coupled with utilization of low-temperature processing, can undesirably result in spatially inhomogeneous properties that locally vary within the material. This complexity of MHPs requires sensitive imaging characterization methods at the microscopic level to gauge the impact of such inhomogeneities on device performance and to formulate mitigation strategies. This review consolidates properties of MHPs that are susceptible to local variations and highlights appropriate imaging techniques that can be employed to map them. Inhomogeneities in morphology, emission, electrical response, and chemical composition of MHP thin films are specifically considered, and possible microscopic techniques for their visualization are reviewed. For each type of microscopy, a short discussion about spatial resolution, sample requirements, advantages, and limitations is provided, thus leaving the reader with a guide of available imaging characterization tools to evaluate inhomogeneities of their MHPs.

Surface Molecular Engineering for Fully Textured Perovskite/Silicon Tandem Solar Cells

Developing large-scale monolithic perovskite/silicon tandem devices based on industrial Czochralski silicon wafers will likely have to adopt double-side textured architecture, given their optical benefits and low manufacturing costs. However, the surface engineering strategies that are widely used in solution-processed perovskites to regulate the interface properties are not directly applicable to micrometric textures. Here, we devise a surface passivation strategy by dynamic spray coating (DSC) fluorinated thiophenethylammonium ligands, combining the advantages of providing conformal coverage and suppressing phase conversion on textured surfaces. From the viewpoint of molecular engineering, theoretical calculation and experimental results demonstrate that introducing trifluoromethyl group provide more effective surface passivation through strong interaction and energy alignment by forming a dipole layer. Consequently, the DSC treatment of this bifunctional molecule enables the tandem cells based on industrial silicon wafers to achieve a certified stabilized power conversion efficiency of 30.89 %. In addition, encapsulated devices display excellent operational stability by retaining over 97 % of their initial performance after 600 h continuous illumination.

Strategies for Improving Efficiency and Stability of Inverted Perovskite Solar Cells

Perovskite solar cells (PSCs) have attracted widespread research and commercialization attention because of their high power conversion efficiency (PCE) and low fabrication cost. The long-term stability of PSCs should satisfy industrial requirements for photovoltaic devices. Inverted PSCs with a p-i-n architecture exhibit considerable advantages because of their excellent stability and competitive efficiency. The continuously broken-through PCE of inverted PSCs shows huge application potential. This review summarizes the developments and outlines the characteristics of inverted PSCs including charge transport layers (CTLs), perovskite compositions, and interfacial regulation strategies. The latest effective CTLs, interfacial modification, and stability promotion strategies especially under light, thermal, and bias conditions are emphatically analyzed. Furthermore, the applications of the inverted structure in high-efficiency and stable tandem, flexible photovoltaic devices, and modules and their main obstacles are systematically introduced. Finally, the remaining challenges faced by inverted devices are discussed, and several directions for advancing inverted PSCs are proposed according to their development status and industrialization requirements.

Towards the 10-Year Milestone of Monolithic Perovskite/Silicon Tandem Solar Cells

The perovskite/silicon tandem solar cell represents one of the most promising avenues for exceeding the Shockley-Queisser limit for single-junction solar cells at a reasonable cost. Remarkably, its efficiency has rapidly increased from 13.7% in 2015 to 34.6% in 2024. Despite the significant research efforts dedicated to this topic, the "secret" to achieving high-performance perovskite/silicon tandem solar cells seems to be confined to a few research groups. Additionally, the discrepancies in preparation and characterization between single-junction and tandem solar cells continue to impede the transition from efficient single-junction to efficient tandem solar cells. This review first revisits the key milestones in the development of monolithic perovskite/silicon tandem solar cells over the past decade. Then, a comprehensive analysis of the background, advancements, and challenges in perovskite/silicon tandem solar cells is provided, following the sequence of the tandem fabrication process. The progress and limitations of the prevalent stability measurements for tandem devices are also discussed. Finally, a roadmap for designing efficient, scalable, and stable perovskite/silicon tandem solar cells is outlined. This review takes the growth history into consideration while charting the future course of perovskite/silicon tandem research.

A binary 2D perovskite passivation for efficient and stable perovskite/silicon tandem solar cells

To achieve high power conversion efficiency in perovskite/silicon tandem solar cells, it is necessary to develop a promising wide-bandgap perovskite absorber and processing techniques in relevance. To date, the performance of devices based on wide-bandgap perovskite is still limited mainly by carrier recombination at their electron extraction interface. Here, we demonstrate assembling a binary two-dimensional perovskite by both alternating-cation-interlayer phase and Ruddlesden-Popper phase to passivate perovskite/C60 interface. The binary two-dimensional strategy takes effects not only at the interface but also in the bulk, which enables efficient charge transport in a wide-bandgap perovskite solar cell with a stabilized efficiency of 20.79% (1 cm2). Based on this absorber, a monolithic perovskite/silicon tandem solar cell is fabricated with a steady-state efficiency of 30.65% assessed by a third party. Moreover, the tandem devices retain 96% of their initial efficiency after 527 h of operation under full spectral continuous illumination, and 98% after 1000 h of damp-heat testing (85 °C with 85% relative humidity).

Defect Engineering at Buried Interface of Perovskite Solar Cells

Perovskite solar cells (PSC) have developed rapidly since the past decade with the aim to produce highly efficient photovoltaic technology at a low cost. Recently, physical and chemical defects at the buried interface of PSC including vacancies, impurities, lattice strain, and voids are identified as the next formidable hurdle to the further advancement of the performance of devices. The presence of these defects has unfavorably impacted many optoelectronic properties in the PSC, such as band alignment, charge extraction/recombination dynamics, ion migration behavior, and hydrophobicity. Herein, a broad but critical discussion on various essential aspects related to defects at the buried interface is provided. In particular, the defects existing at the surface of the underlying charge transporting layer (CTL) and the bottom surface of the perovskite film are initially elaborated. In situ and ex situ characterization approaches adopted to unveil hidden defects are elucidated to determine their influence on the efficiency, operational stability, and photocurrent-voltage hysteresis of PSC. A myriad of innovative strategies including defect management in CTL, the introduction of passivation materials, strain engineering, and morphological control used to address defects are also systematically elucidated to catalyze the further development of more efficient, reliable, and commercially viable photovoltaic devices.

Textured Perovskite/Silicon Tandem Solar Cells Achieving Over 30% Efficiency Promoted by 4-Fluorobenzylamine Hydroiodide

Monolithic textured perovskite/silicon tandem solar cells (TSCs) are expected to achieve maximum light capture at the lowest cost, potentially exhibiting the best power conversion efficiency. However, it is challenging to fabricate high-quality perovskite films and preferred crystal orientation on commercially textured silicon substrates with micrometer-size pyramids. Here, we introduced a bulky organic molecule (4-fluorobenzylamine hydroiodide (F-PMAI)) as a perovskite additive. It is found that F-PMAI can retard the crystallization process of perovskite film through hydrogen bond interaction between F- and FA+ and reduce (111) facet surface energy due to enhanced adsorption energy of F-PMAI on the (111) facet. Besides, the bulky molecular is extruded to the bottom and top of perovskite film after crystal growth, which can passivate interface defects through strong interaction between F-PMA+ and undercoordinated Pb2+/I-. As a result, the additive facilitates the formation of large perovskite grains and (111) preferred orientation with a reduced trap-state density, thereby promoting charge carrier transportation, and enhancing device performance and stability. The perovskite/silicon TSCs achieved a champion efficiency of 30.05% based on a silicon thin film tunneling junction. In addition, the devices exhibit excellent long-term thermal and light stability without encapsulation. This work provides an effective strategy for achieving efficient and stable TSCs.

Constructing tin oxides Interfacial Layer with Gradient Compositions for Efficient Perovskite/Silicon Tandem Solar Cells with Efficiency Exceeding 28

Atomic layer deposition (ALD) growth of conformal thin SnOx films on perovskite absorbers offers a promising method to improve carrier-selective contacts, enable sputter processing, and prevent humidity ingress toward high-performance tandem perovskite solar cells. However, the interaction between perovskite materials and reactive ALD precursor limits the process parameters of ALD-SnOx film and requires an additional fullerene layer. Here, it demonstrates that reducing the water dose to deposit SnOx can reduce the degradation effect upon the perovskite underlayer while increasing the water dose to promote the oxidization can improve the electrical properties. Accordingly, a SnOx buffer layer with a gradient composition structure is designed, in which the compositionally varying are achieved by gradually increasing the oxygen source during the vapor deposition from the bottom to the top layer. In addition, the gradient SnOx structure with favorable energy funnels significantly enhances carrier extraction, further minimizing its dependence on the fullerene layer. Its broad applicability for different perovskite compositions and various textured morphology is demonstrated. Notably, the design boosts the efficiencies of perovskite/silicon tandem cells (1.0 cm2) on industrially textured Czochralski (CZ) silicon to a certified efficiency of 28.0%.

Single-Crystal-Assisted In Situ Phase Reconstruction Enables Efficient and Stable 2D/3D Perovskite Solar Cells

Perovskite solar cells (PSCs) that incorporate both two-dimensional (2D) and three-dimensional (3D) phases possess the potential to combine the high stability of 2D PSCs with the superior efficiency of 3D PSCs. Here, we demonstrated in situ phase reconstruction of 2D/3D perovskites using a 2D perovskite single-crystal-assisted method. A gradient phase distribution of 2D RP perovskites was formed after spin-coating a solution of the 2D Ruddlesden-Popper (RP) perovskite single crystal, (DFP)2PbI4, onto the 3D perovskite surface, followed by thermal annealing. The resulting film exhibits much reduced trap density, increased carrier mobility, and superior water resistance. As a result, the optimized 2D/3D PSCs achieved a champion efficiency of 24.87% with a high open-circuit voltage (VOC) of 1.185 V. This performance surpasses the control 3D perovskite device, which achieved an efficiency of 22.43% and a VOC of 1.129 V. Importantly, the unencapsulated device demonstrates significantly enhanced operational stability, preserving over 97% of its original efficiency after continuous light irradiation for 1500 h. Moreover, the extrapolated T80 lifetimes surpass 5700 h. These findings pave the way for rational regulation of the gradient phase distribution at the interface between 2D and 3D perovskites by employing 2D RP perovskite crystals to achieve stable and efficient PSCs.

Bilayer 2D-3D Perovskite Heterostructures for Efficient and Stable Solar Cells

With a stacking-layered architecture, the bilayer two-dimensional-three-dimensional (2D-3D) perovskite heterostructure (PHS) not only eliminates surface defects but also protects the 3D perovskite matrix from external stimuli. However, these bilayer 2D-3D PHSs suffer from impaired interfacial charge carrier transport due to the relatively insulating 2D perovskite fragments with a random phase distribution. Over the past decade, substantial efforts have been devoted to pioneering molecular and structural designs of the 2D perovskite interlayers for improving their charge carrier mobility, which enables state-of-the-art perovskite solar cells with high power conversion efficiency and exceptional operational stability. Herein, this review offers a comprehensive and up-to-date overview on the recent progress of bilayer 2D-3D PHSs, encompassing advancements on spacer cation engineering, interfacial charge carrier modification, advanced deposition protocols, and characterization techniques. Then, the evolutionary trajectory of bilayer 2D-3D PHSs is outlined by summarizing its mainstream development trends, followed by a perspective discussion about its future research opportunities toward efficient and durable perovskite solar cells.