Alternating Current Electroluminescence for Human-Interactive Sensing Displays

Lighting the Path to Precision Healthcare: Advances and Applications of Wearable Photonic Sensors

Recent advancements in wearable photonic sensors have marked a transformative era in healthcare, enabling non-invasive, real-time, portable, and personalized medical monitoring. These sensors leverage the unique properties of light toward high-performance sensing in form factors optimized for real-world use. Their ability to offer solutions to a broad spectrum of medical challenges - from routine health monitoring to managing chronic conditions, inspires a rapidly growing translational market. This review explores the design and development of wearable photonic sensors toward various healthcare applications. The photonic sensing strategies that power these technologies are first presented, alongside a discussion of the factors that define optimal use-cases for each approach. The means by which these mechanisms are integrated into wearable formats are then discussed, with considerations toward material selection for comfort and functionality, component fabrication, and power management. Recent developments in the space are detailed, accounting for both physical and chemical stimuli detection through various non-invasive biofluids. Finally, a comprehensive situational overview identifies critical challenges toward translation, alongside promising solutions. Associated future outlooks detail emerging trends and mechanisms that stand to enable the integration of these technologies into mainstream healthcare practice, toward advancing personalized medicine and improving patient outcomes.

White light-emitting electrochemical cells based on metal-free TADF emitters

The attainment of white emission from a light-emitting electrochemical cell (LEC) is important, since it enables illumination and facile color conversion from devices that can be cost-efficient and sustainable. However, a drawback with current white LECs is that they either employ non-sustainable metals as an emitter constituent or are intrinsically efficiency limited by that the emitter only converts singlet excitons to photons. Organic compounds that emit by thermally activated delayed fluorescence (TADF) can address these issues since they can harvest all excitons for light emission while being metal free. Here, we report on the first white LEC based on solely metal-free TADF emitters, as accomplished through careful tuning of the energy-transfer processes and the electrochemically formed doping structure in the single-layer active material. The designed TADF-LEC emits angle-invariant white light (color rendering index = 88) with an external quantum efficiency of 2.1 % at a luminance of 350 cd/m2.

A core-shell fiber moisture-driven electric generator enabled by synergetic complex coacervation and built-in potential

Moisture-driven electricity generators (MEGs) have been extensively researched; however, high-performance flexible variants have seldom been demonstrated. Here we present a novel complex coacervation with built-in potential strategy for developing a high-performance uniaxial MEG, featuring a core of poly(3,4-ethylenedioxythiophene) (PEDOT) with a built-in charge potential and a gel shell composed of poly(diallyldimethylammonium chloride) (PDDA) and sodium alginate (NaAlg) coacervate. The complex coacervation of two oppositely charged polyelectrolytes produces extra mobile carriers and free volume in the device; meanwhile, the PEDOT core's surface charge significantly accelerates carrier diffusion. Consequently, the uniaxial fiber-based MEG demonstrates breakthrough performance, achieving an output voltage of up to 0.8 V, a maximum current density of 1.05 mA/cm2, and a power density of 184 μW/cm2 at 20% relative humidity. Moreover, the mechanical robustness is ensured for the PEDOT nanoribbon substrate without performance degradation even after 100,000 folding cycles, making it suitable for self-powered human interactive sensor and synapse. Notably, we have constructed the inaugural MEG-synapse self-powered device, with a fiber-based MEG successfully operating a synaptic memristor, thereby emulating autonomous human synapses linked with fibrous neurons. Overall, this work pioneers innovative design strategies and application scenarios for high-performance MEGs.

Alternating current electroluminescence devices: recent advances and functional applications

Wearable smart devices and visualisation sensors based on alternating current electroluminescence (ACEL) have received considerable attention in recent years. Due to the unique properties of ACEL devices, such as high mechanical strength, adaptability to complex environments, and no need for energy level matching, ACEL is suitable for multifunctional applications and visualisation sensing platforms. This review comprehensively outlines the latest developments in ACEL devices, starting with an analysis of the mechanism, classification, and optimisation strategies of ACEL. It introduces the functional applications of ACEL in multicolour displays, high-durability displays, stretchable and wearable displays, and autonomous function displays. Particularly, it emphasises the research progress of ACEL in sensory displays under interactive conditions such as liquid sensing, environmental factor sensing, kinetic energy sensing, and biosensing. Finally, it forecasts the challenges and new opportunities faced by future functional and interactive ACEL devices in fields such as artificial intelligence, smart robotics, and human-computer interaction.

Low Driving Voltage Electroluminescence Device for Integrated Visual Strain Sensing

As a pivotal component in human-machine interactions, display devices have undergone rapid development in modern life. Displays such as alternative current electroluminescence|alternative current electroluminescent (ACEL) devices with high flexibility and long operational lifetimes are essential for wearable electronics. However, ACEL devices are constrained by their inherent high driving voltage and complex fabrication processes. Our work presents an easy blade-coating method for fabricating flexible ACEL display devices based on an all-solution process. By dispersing BaTiO3 and ZnS/Cu powder into waterborne polyurethane, we successfully combined dielectric and fluorescence functionalities within a single layer, significantly reducing the device's driving voltage. Additionally, the ionic conducting hydrogel was chosen as a transparent electrode to achieve good electrical contact and strong interfacial adhesion through in situ polymerization. Owing to the unique method, our ACEL device exhibits high flexibility, low driving voltage (20-100 V), high brightness (300+ cd/m2 at 60 V), and environmental friendliness. Furthermore, by repurposing the hydrogel electrode, we integrated strain visualization capabilities within a single device, highlighting its potential for applications such as wearable healthcare monitoring.

From Fluorescence-Transfer-Lightening-Printing-Assisted Conductive Adhesive Nanocomposite Hydrogels toward Wearable Interactive Optical Information-Electronic Strain Sensors

The interactive flexible device, which monitors the human motion in optical and electrical synergistic modes, has attracted growing attention recently. The incorporation of information attribute within the optical signal is deemed advantageous for improving the interactive efficiency. Therefore, the development of wearable optical information-electronic strain sensors holds substantial promise, but integrating and synergizing various functions and realizing strain-mediated information transformation keep challenging. Herein, an amylopectin (AP) modified nanoclay/polyacrylamide-based nanocomposite (NC) hydrogel and an aggregation-induced-emission-active ink are fabricated. Through the fluorescence-transfer printing of the ink onto the hydrogel film in different strains with nested multiple symbolic information, a wearable interactive fluorescent information-electronic strain sensor is developed. In the sensor, the nanoclay plays a synergistic "one-stone-three-birds" role, contributing to "lightening" fluorescence (≈80 times emission intensity enhancement), ionic conductivity, and excellent stretchability (>1000%). The sensor has high biocompatibility, resilience (elastic recovery ratio: 97.8%), and strain sensitivity (gauge factor (GF): 10.9). Additionally, the AP endows the sensor with skin adhesiveness. The sensor can achieve electrical monitoring of human joint movements while displaying interactive fluorescent information transformation. This research poses an efficient strategy to develop multifunctional materials and provides a general platform for achieving next-generation interactive devices with prospective applications in wearable devices, human-machine interfaces, and artificial intelligence.

Contactless User-Interactive Sensing Display for Human-Human and Human-Machine Interactions

Creating a large-scale contactless user-interactive sensing display (CUISD) with optimal features is challenging but crucial for efficient human-human or human-machine interactions. This study reports a CUISD based on dynamic alternating current electroluminescence (ACEL) that responds to humidity. Subsecond humidity-induced luminescence is achieved by integrating a highly responsive hydrogel into the ACEL layer. The patterned silver nanofiber electrode and luminescence layer, produced through electrospinning and microfabrication, result in a stretchable, large-scale, high-resolution, multicolor, and dynamic CUISD. The CUISD is implemented for the real-time control of a remote-controlled car, wherein the luminescence signals induced by touchless finger movements are distinguished and encoded to deliver specific commands. Moreover, the distinctive recognition of breathing facilitates the CUISD to serve as a visual signal transmitter for information interaction, which is particularly beneficial for individuals with disabilities. The paradigm shift depicts in this work is expected to reshape the way authors interact with each other and devices, discovering niche applications in virtual/augmented reality and the metaverse.

Multi-grayscale driving system for passive-matrix alternating current electroluminescence display

Alternating current electroluminescence (ACEL) has great potential in flexible displays, especially in textile displays. However, since ACEL needs high-frequency, high-voltage AC signal to drive, there remains no driving scheme for pixelated ACEL display to achieve multiple gray scales. In this work, a driving scheme based on full-bridge inverters is proposed for passive-matrix ACEL (PMACEL) display, which achieves multiple gray scales by changing the duty cycle of the square wave. A single-pixel ACEL displaying 16 gray levels (4 bits) and a 5 × 8 fabric PMACEL displaying eight gray levels are demonstrated, enabling flexible ACEL devices to exhibit more vivid tones on a fabric substrate.

Fully Printable and Reconfigurable Hufu-type Electroluminescent Devices for Visualized Encryption

Hufu, serving as evidence of imperial authorization in ancient China, comprises two parts in the form of tiger-shaped tallies that only become effective when matched. Drawing inspiration from the concept of Hufu, a reconfigurable electroluminescent (EL) device is designed by separating conventional integral devices into two parts that contain the EL layer (part A) and the transparent electrode (part B), respectively. The key to realizing such strategy is employing an adhesive and stretchable polymer gel composite as the transparent electrodes for the EL devices. The polymer gel composite facilitates robust yet reversible contact between the EL layer and transparent electrode, enabling high-performance and stretchable EL devices that can be readily disassembled and reassembled: the EL devices can maintain ≈81% of their initial luminance after 1000 times of repeated disassembly and reassembly. Moreover, the precursor ink of the polymer gel composite is compatible with a wide variety of coating and printing technologies, such as spin-coating, inkjet printing, dispensing, and brush painting. Importantly, the reconfigurable feature of the devices opens up a new path to encryption display systems, and as a proof-of-concept, EL encrypted password, and content-changeable digital clock are demonstrated.