Synergizing Spatial Confinement and Dual-Metal Catalysis to Boost Sulfur Kinetics in Lithium-Sulfur Batteries

CeO2/Co heterostructure encapsulated in hollow necklace-like carbon fiber as an advanced host material for high-performance lithium-sulfur batteries

The shuttle effect of lithium polysulfides (LiPSs) and the sluggish reaction kinetics of LiPSs conversion pose serious challenges to the commercial feasibility of lithium-sulfur (Li-S) batteries. To address these obstacles, herein, we construct CeO2/Co heterostructures in hollow necklace-like carbon fibers (CeO2/Co-CNFs) as the cathode host material for Li-S batteries. The specific surface area of fibers is significantly enhanced by using a template, thereby promoting the utilization efficiency of sulfur. Meanwhile, CeO2/Co-CNFs show strong conductivity, effective adsorption to LiPSs, and robust catalytic activity for LiPSs conversion. As a result, the Li-S battery with CeO2/Co-CNFs displays 961 mAh g-1 at 0.2 C, with an 86 % capacity retention rate after 100 cycles. At 2.0 C current density, the composite cathode maintains an initial discharge capacity of 782 mAh g-1, with a mere 0.044 % capacity loss per cycle. Furthermore, in situations with limited electrolytes, high sulfur loading, and high areal mass loading, the composite cathode can provide a high areal capacity of 6.2 mg cm-2 over 100 cycles. This work provides a useful approach for investigating high-performance Li-S battery cathodes.

Metal Organic Frameworks as Polysulfide Reaction Modulators for Lithium Sulfur Batteries: Advances and Perspectives

Currently, lithium sulfur (Li-S) battery with high theoretical energy density has attracted great research interest. However, the diffusion and loss process of intermediate lithium polysulfide during charge-discharge hindered the application of the Li-S battery in modern life. To overcome this issue, metal organic frameworks (MOFs) and their composites have been regarded as effective additions to restrain the LiPS diffusion process for Li-S battery. Benefiting from the unique structure with rich active sites to adsorb LiPS and accelerate the LiPS redox, the Li-S batteries with MOFs modified exhibit superior electrochemical performance. Considering the rapid development of MOFs in Li-S battery, this review summarizes the recent studies of MOFs and their composites as the sulfur host materials, functional interlayer, separator coating layer, and separator/solid electrolyte for Li-S batteries in detail. In addition, the promising design strategies of functional MOF materials are proposed to improve the electrochemical performance of Li-S battery.

Construction of N-doped carbon encapsulated CoP hollow nanofibers as multifunctional electrode materials for potassium-ion and lithium-sulfur batteries

Herein, a composite of N-doped carbon coated phosphating cobalt hollow nanofibers (N/C@CoP-HNFs) was synthesized by electrospinning, phosphating, and carbon coating processes. When employed as multifunctional electrode materials for potassium-ion batteries (PIBs) and lithium-sulfur (Li-S) batteries, the N/C@CoP-HNFs demonstrated notable electrochemical properties. Specifically, it delivered an initial specific capacity of 420.4 mA h g-1 at a current density of 100 mA g-1, with a sustained capacity of 190.8 mA h g-1 after 200 cycles in PIBs, and a specific capacity of 1448 mA h g-1 at a current density of 0.5C in Li-S batteries, which is considered relatively high for these types of battery technology. This good performance may due to the combination of the carbon nitrogen layer and cobalt phosphide bilayer hollow tube structure, which is conducive to telescoping the diffusion length of ions and electrons and buffer volume variation, and effectively inhibits the shuttle effect. Density functional theory (DFT) calculations were also used to explore the energy storage mechanism of the material. The possible adsorption sites and corresponding adsorption energy of K+ were analyzed, and the advantages of the material were explored by calculating the diffusion barrier and state density. The theoretical simulations further validated the strong adsorption capability of CoP for polysulfides. This work is expected to provide new ideas for new energy storage materials.

Engineering Covalent Organic Frameworks Toward Advanced Zinc-Based Batteries

Zinc-based batteries (ZBBs) have demonstrated considerable potential among secondary batteries, attributing to their advantages including good safety, environmental friendliness, and high energy density. However, ZBBs still suffer from issues such as the formation of zinc dendrites, occurrence of side reactions, retardation of reaction kinetics, and shuttle effects, posing a great challenge for practical applications. As promising porous materials, covalent organic frameworks (COFs) and their derivatives have rigid skeletons, ordered structures, and permanent porosity, which endow them with great potential for application in ZBBs. This review, therefore, provides a systematic overview detailing on COFs structure pertaining to electrochemical performance of ZBBs, following an in depth discussion of the challenges faced by ZBBs, which includes dendrites and side reactions at the anode, as well as dissolution, structural change, slow kinetics, and shuttle effect at the cathode. Then, the structural advantages of COF-correlated materials and their roles in various ZBBs are highlighted. Finally, the challenges of COF-correlated materials in ZBBs are outlined and an outlook on the future development of COF-correlated materials for ZBBs is provided. The review would serve as a valuable reference for further research into the utilization of COF-correlated materials in ZBBs.

Regulating the catalytic behaviour of iron oxyhydroxide by introducing Ni sites for facilitating polysulfide anchoring and conversion

The sluggish conversion kinetics and notorious shuttle effect of polysulfides are critical hindrances to practical implementation of lithium-sulfur batteries. Herein, bimetallic oxyhydroxide (FeNiOOH) as a functional sulfur host is proposed to overcome these obstacles. The introduction of Ni sites can modulate the electronic structure of the active sites to implement strong soluble polysulfide species immobilization and accelerate the conversion reaction kinetics of polysulfides, resulting in improved sulfur utilization and reduced polarization during the electrochemical reaction process. Benefiting from these advantages, FeNiOOH enables the sulfur cathode to deliver superior rate capability and cycling stability.

Design of a sulfur host with CuCo2O4 supported on carbon cloth for lithium sulfur batteries

A high-efficiency sulfur host with bimetallic oxide CuCo2O4 cubes supported on carbon cloth has been designed and used in lithium sulfur batteries, which can suppress the "shuttle effect" and boost the redox reaction kinetics. The unique three-dimensional cube-based structure realized a high sulfur loading of 7.1 mg cm-2, and the corresponding assembled lithium sulfur battery delivered excellent cycling stability over 100 cycles at 0.1C.

Synergistic Effect of Oxygen Vacancy and High Porosity of Nano MIL-125(Ti) for Enhanced Photocatalytic Nitrogen Fixation

This work reports that a low-temperature thermal calcination strategy was adopted to modulate the electronic structure and attain an abundance of surface-active sites while maintaining the crystal morphology. All the experiments demonstrate that the new photocatalyst nano MIL-125(Ti)-250 obtained by thermal calcination strategy has abundant Ti3+ induced by oxygen vacancies and high specific surface area. This facilitates the adsorption and activation of N2 molecules on the active sites in the photocatalytic nitrogen fixation. The photocatalytic NH3 yield over MIL-125(Ti)-250 is enhanced to 156.9 μmol g-1  h-1 , over twice higher than that of the parent MIL-125(Ti) (76.2 μmol g-1  h-1 ). Combined with density function theory (DFT), it shows that the N2 adsorption pattern on the active sites tends to be from "end-on" to "side-on" mode, which is thermodynamically favourable. Moreover, the electrochemical tests demonstrate that the high atomic ratio of Ti3+ /Ti4+ can enhance carrier separation, which also promotes the efficiency of photocatalytic N2 fixation. This work may offer new insights into the design of innovative photocatalysts for various chemical reduction reactions.

Accelerating Sulfur Redox Chemistry by Atomically Dispersed Zn-N4 Sites Coupled with Pyridine-N Defects on Porous Carbon Sheets

Single-atom catalysts (SACs) with specific N-coordinated configurations immobilized on the carbon substrates have recently been verified to effectively alleviate the shuttle effect of lithium polysulfides (LiPSs) in lithium-sulfur (Li─S) batteries. Herein, a versatile molten salt (KCl/ZnCl2 )-mediated pyrolysis strategy is demonstrated to fabricate Zn SACs composed of well-defined Zn-N4 sites embedded into porous carbon sheets with rich pyridine-N defects (Zn─N/CS). The electrochemical kinetic analysis and theoretical calculations reveal the critical roles of Zn-N4 active sites and surrounding pyridine-N defects in enhancing adsorption toward LiPS intermediates and catalyzing their liquid-solid conversion. It is confirmed by reducing the overpotential of the rate-determining step of Li2 S2 to Li2 S and the energy barrier for Li2 S decomposition, thus the Zn─N/CS guarantees fast redox kinetics between LiPSs and Li2 S products. As a proof of concept demonstration, the assembled Li─S batteries with the Zn─N/CS-based sulfur cathode deliver a high specific capacity of 1132 mAh g-1 at 0.1 C and remarkable capacity retention of 72.2% over 800 cycles at 2 C. Furthermore, a considerable areal capacity of 6.14 mAh cm-2 at 0.2 C can still be released with a high sulfur loading of 7.0 mg cm-2 , highlighting the practical applications of the as-obtained Zn─N/CS cathode in Li─S batteries.