Mechanoluminescence and Photoluminescence Heterojunction for Superior Multimode Sensing Platform of Friction, Force, Pressure, and Temperature in Fibers and 3D-Printed Polymers

Self-powered visualized tactile-acoustic sensor for accurate artificial perception with high brightness and record-low detection limit

The growth of the Internet of Things has focused attention on visualized sensors as a key technology. However, it remains challenging to achieve high sensing accuracy and self-power ability. Here, we propose a self-powered visualized tactile-acoustic sensor (SVTAS) based on an elaborated triboelectrification-induced electroluminescence (TIEL) unit. To date, it features a high brightness of 0.5 mW cm-2 (32 cd m-2) and a record-low detection limit of 0.5 kPa in horizontal-sliding mode. Meanwhile, the SVTAS is applicable to convert acoustic waves into TIEL signals in contact-separation mode, showing the highest response to the 44.07 Hz sound, a high signal-to-noise ratio of 8.7 dB-1, and an ultrafast response time of 0.8 ms. Furthermore, advanced artificial visualized perception systems are constructed with excellent performance in recognizing motion trajectories and human speech with different words/sentences. This work paves the way for the highly efficient and sustainable development of new-generation self-powered visualized perception systems, contributing a solution to wireless communication free from electromagnetic interference.

Flexible X-ray Imaging and Stable Information Storage of SrF2:Eu Based on Radio-Photoluminescence

X-ray imaging has garnered widespread interest in biomedical diagnosis and nondestructive detection. The exploration of radio-photoluminescence has hastened the advancement of X-ray information storage. However, significant challenges persist in achieving the prolonged imaging of curved objects without attenuation. Here, europium-doped strontium fluoride (SrF2:Eu) is meticulously created to exhibit a linear response to an extensive range of X-ray doses (maximum dose > 5000 Gy), showcasing excellent X-ray information reading/erasing reusability properties (10 cycles). This is accompanied by a red-to-blue emission transition under UV excitation, sustaining for 150 days without attenuation. To elucidate the phenomena of irradiated photoluminescent discoloration and the reversible X-ray storage of SrF2:Eu, we propose an electron-vacancy trap (valence conversion) mechanism, information stably retained by the SrF2:Eu-based device under ambient conditions due to high energy barriers. The time-lapse readout capability is further demonstrated for three-dimensional imaging of curved objects (10 lp mm-1) based on SrF2:Eu embedded within a polydimethylsiloxane (SrF2:Eu@PDMS). The SrF2:Eu demonstrates time-lapse imaging, reversible radio-photoluminescence, and recoverable X-ray storage, offering a promising avenue for optical information encryption and anticounterfeiting applications.

Dual-Modal Sensing Skin Adaptive to Daylight, Darkness, and Ultraviolet Light for Simultaneous Full-Field Deformation Measurement and Mechanoluminescence Responses

Mechanoluminescence (ML) and digital image correlation (DIC) have emerged as promising optical methods to visualize and measure deformation fields. In this study, a dual-modal sensing skin, called the ML-DIC skin is introduced, that is capable of emitting ML and facilitating DIC measurements under various lighting conditions, including daylight, night or darkness, and UV irradiation. Four ML-DIC skins are fabricated with or without carbon nanotubes (CNTs) using a composite powder consisting of SrAl2O4: Eu,Dy (SAO), and acrylic resin, with CNT milling times of 48, 72, and 96 h for three of four skins, respectively. DIC measurements are performed under multiple lighting conditions for measuring photoluminescence, persistence luminescence, and reflection. Uniaxial tension tests demonstrate the superior performance of ML-DIC skins with CNTs compared with pristine SAO skins, with the skin subjected to 48 h of CNT dispersion exhibiting optimal performance. Further investigations focus on ML emission and DIC measurements near the crack-tip vicinity of static and propagating cracks as well as on surfaces above subsurface cracks. The integration of ML and DIC techniques offers a versatile approach for comprehensive deformation analysis applicable to diverse environments, with implications for materials science, engineering, and structural health monitoring.

Force-Induced Ultraviolet C Luminescence of Pr3+-Doped Sr2P2O7 for X-Ray Dosimetry

Mechanoluminescent materials have broad application prospects in advanced displays, stress imaging, and anti-counterfeiting owing to their ability to convert mechanical stimuli into light. However, most previous studies have focused on the visible and near-infrared regions. Although natural ultraviolet C (UVC) light is nearly absent on the Earth's surface, it plays an important role in many fields. Therefore, the development of smart materials capable of emitting UVC mechanoluminescence (ML) and expanding the application scenarios of UVC ML are significant but challenging. Here the ML property of Sr2P2O7:Pr3+ is examined, which stems from the 5d→4f transition of Pr3+ and is located over the UVC region. The peak wavelength of the UVC ML of Sr2P2O7:Pr3+ is ≈230 nm, which is, to the best of this knowledge, the shortest ML wavelength reported to date. It is further demonstrated that the UVC ML of Sr2P2O7:Pr3+ is associated with trapped charge carriers and can be conveniently regulated by adjusting the X-ray excitation time. Relying on this unique characteristic, the potential of the UVC ML of Sr2P2O7:Pr3+ as an indicator of the X-ray radiation dose is demonstrated. This study enriches the family of mechanoluminescent materials and expands the available wavelength of ML to the UVC region.

Supersensitive visual pressure sensor based on the exciton luminescence of a perovskite material

Accurate, rapid, and remote detection of pressure, one of the fundamental physical parameters, is vital for scientific, industrial, and daily life purposes. However, due to the limited sensitivity of luminescent manometers, the optical pressure monitoring has been applied mainly in scientific studies. Here, we developed the first supersensitive optical pressure sensor based on the exciton-type luminescence of the Bi3+-doped, double perovskite material Cs2Ag0.6Na0.4InCl6. The designed luminescent manometer exhibits an extremely high sensitivity, i.e. dλ/dp = 112 nm GPa-1. It also allows multi-parameter sensing, using both blue-shift and rarely observed band narrowing with pressure. Importantly, this material has small temperature dependence for the manometric parameter used, i.e. spectral shift, allowing detection under extreme pressure and temperature conditions. The developed sensor operates in the visible range, and its emission shifts from orange to blue with pressure. This approach allowed us to demonstrate the real-world application of this sensor in detecting small changes in pressure with a designed uniaxial pressure device, with unprecedented resolution of the order of a few bars, demonstrating the technological potential of this sensor for remote, online monitoring of cracks and strains in heavy construction facilities.

Persistent Photoluminescence and Mechanoluminescence of a Highly Sensitive Pressure and Temperature Gauge in Combination with a 3D-Printable Optical Coding Platform

Distinct types of luminescence that are activated by various stimuli in a single material offer exciting developmental opportunities for functional materials. A versatile sensing platform that exhibits photoluminescence (PL), persistent luminescence (PersL), and mechanoluminescence (ML) is introduced, which enables the sensitive detection of temperature, pressure, and force/stress. The developed Sr2MgSi2O7:Eu2+/Dy3+ material exhibits a linear relationship between ML intensity and force and can be used as an ML stress sensor. Additionally, the bandwidth of the PL emission band and the PL lifetime of this material are remarkably sensitive to temperature, with values of ≈0.05 nm K-1 and 1.29%/K, respectively. This study demonstrates PersL pressure sensing for the first time, using long-lasting (seconds) lifetime as a manometric parameter. The developed material functions as an exceptionally sensitive triple-mode visual pressure sensor; specifically, it exhibits: i) a sensitivity of ≈-297.4 cm GPa-1 (8.11 nm GPa-1) in bandshift mode, ii) a sensitivity of ≈272.7 cm-1/GPa (14.8 nm GPa-1) in bandwidth mode, and iii) a sensitivity of 42%GPa-1 in PL-lifetime mode, which is the highest value reported to date. Notably, anti-counterfeiting, night-vision safety-sign, 8-bit optical-coding, and QR-code applications that exhibit intense PersL are demonstrated by 3D-printing the studied material in combination with a polymer.

Unlocking the Potential of Organic-Inorganic Hybrid Manganese Halides for Advanced Optoelectronic Applications

Organic-inorganic hybrid manganese(II) halides (OIMnHs) have garnered tremendous interest across a wide array of research fields owing to their outstanding optical properties, abundant structural diversity, low-cost solution processibility, and low toxicity, which make them extremely suitable for use as a new class of luminescent materials for various optoelectronic applications. Over the past years, a plethora of OIMnHs with different structural dimensionalities and multifunctionalities such as efficient photoluminescence (PL), radioluminescence, circularly polarized luminescence, and mechanoluminescence have been newly created by judicious screening of the organic cations and inorganic Mn(II) polyhedra. Specifically, through precise molecular and structural engineering, a series of OIMnHs with near-unity PL quantum yields, high anti-thermal quenching properties, and excellent stability in harsh conditions have been devised and explored for applications in light-emitting diodes (LEDs), X-ray scintillators, multimodal anti-counterfeiting, and fluorescent sensing. In this review, the latest advancements in the development of OIMnHs as efficient light-emitting materials are summarized, which covers from their fundamental physicochemical properties to advanced optoelectronic applications, with an emphasis on the structural and functionality design especially for LEDs and X-ray detection and imaging. Current challenges and future efforts to unlock the potentials of these promising materials are also envisioned.

Achieving Ultra-Broadband Sunlight-Like Emission in Single-Phase Phosphors: The Interplay of Structure and Luminescence

The quest for artificial light sources mimicking sunlight has been a long-standing endeavor, particularly for applications in anticounterfeiting, agriculture, and color hue detection. Conventional sunlight simulators are often cost-prohibitive and bulky. Therefore, the development of a series of single-phase phosphors Ca9LiMg1-xAl2x/3(PO4)7:0.1Eu2+ (x = 0-0.75) with sunlight-like emission represents a welcome step towards compact and economical light source alternatives. The phosphors are obtained by an original heterovalent substitution method and emit a broad spectrum   spanning from violet to deep red. Notably, the phosphor with x = 0.5 exhibits an impressive full width at half-maximum of 330 nm. A synergistic interplay of experimental investigations and theory unveils the mechanism behind sunlight-like emission due to the local structural perturbations introduced by the heterovalent substitution of Al3+ for Mg2+, leading to a varied distribution of Eu2+ within the lattice. Subsequent characterization of a series of organic dyes combining absorption spectroscopy with convolutional neural network analysis convincingly demonstrates the potential of this phosphor in portable photodetection devices. Broad-spectrum light source testing empowers the model to precisely differentiate dye patterns. This points to the phosphor being ideal for mimicking sunlight. Beyond this demonstrated application, the phosphor's utility is envisioned in other relevant domains, including visible light communication and smart agriculture.

Stretchable and Self-Powered Mechanoluminescent Triboelectric Nanogenerator Fibers toward Wearable Amphibious Electro-Optical Sensor Textiles

Flexible electro-optical dual-mode sensor fibers with capability of the perceiving and converting mechanical stimuli into digital-visual signals show good prospects in smart human-machine interaction interfaces. However, heavy mass, low stretchability, and lack of non-contact sensing function seriously impede their practical application in wearable electronics. To address these challenges, a stretchable and self-powered mechanoluminescent triboelectric nanogenerator fiber (MLTENGF) based on lightweight carbon nanotube fiber is successfully constructed. Taking advantage of their mechanoluminescent-triboelectric synergistic effect, the well-designed MLTENGF delivers an excellent enhancement electrical signal of 200% and an evident optical signal whether on land or underwater. More encouragingly, the MLTENGF device possesses outstanding stability with almost unchanged sensitivity after stretching for 200%. Furthermore, an extraordinary non-contact sensing capability with a detection distance of up to 35 cm is achieved for the MLTENGF. As application demonstrations, MLTENGFs can be used for home security monitoring, intelligent zither, traffic vehicle collision avoidance, and underwater communication. Thus, this work accelerates the development of wearable electro-optical textile electronics for smart human-machine interaction interfaces.

Pushing Trap-Controlled Persistent Luminescence Materials toward Multi-Responsive Smart Platforms: Recent Advances, Mechanism, and Frontier Applications

Smart stimuli-responsive persistent luminescence materials, combining the various advantages and frontier applications prospects, have gained booming progress in recent years. The trap-controlled property and energy storage capability to respond to external multi-stimulations through diverse luminescence pathways make them attractive in emerging multi-responsive smart platforms. This review aims at the recent advances in trap-controlled luminescence materials for advanced multi-stimuli-responsive smart platforms. The design principles, luminescence mechanisms, and representative stimulations, i.e., thermo-, photo-, mechano-, and X-rays responsiveness, are comprehensively summarized. Various emerging multi-responsive hybrid systems containing trap-controlled luminescence materials are highlighted. Specifically, temperature dependent trapping and de-trapping performance is discussed, from extreme-low temperature to ultra-high temperature conditions. Emerging applications and future perspectives are briefly presented. It is hoped that this review would provide new insights and guidelines for the rational design and performance manipulation of multi-responsive materials for advanced smart platforms.

Highly Robust and Self-Adhesive Soft Strain Gauge via Interface Design Engineering

Highly robust soft strain gauges are rapidly emerging as a promising candidate in the fields of vital signs and machine conditions monitoring. However, it is still a key challenge to achieve high-performance strain sensing in these sensors with mechanical/electrical robustness for long-term usage. The multilayer structural design of sensors enhances sensing performance while the interfacial connection of heterogeneous materials between different layers is weak. Herein, inspired by the efficient perception mechanism of scorpion slit sensilla with tough interface interconnections, the synergy of ultra-high electrical performance and mechanical robustness is successfully achieved via interface design engineering. The developed multilayer soft strain gauge (MSSG) exhibits a strain sensitivity beyond 105, a lower detection limit of 8.3 µm, a frequency resolution within 0.1 Hz, and cyclic stability over 63 000 strain cycles. Also, the tough interface improves the level of heterogeneous integration in the MSSG which allows to endure different stresses. Furthermore, an MSSG-based wireless strain monitoring system is developed that enables applications on different complex dynamic surfaces, including accurate identification of human throat activity and monitoring of rolling bearing conditions.

Volume-Metallization 3D-Printed Polymer Composites

3D printing polymer or metal can achieve complicated structures while lacking multifunctional performance. Combined printing of polymer and metal is desirable and challenging due to their insurmountable mismatch in melting-point temperatures. Here, a novel volume-metallization 3D-printed polymer composite (VMPC) with bicontinuous phases for enabling coupled structure and function, which are prepared by infilling low-melting-point metal (LM) to controllable porous configuration is reported. Based on vacuum-assisted low-pressure conditions, LM is guided by atmospheric pressure action and overcomes surface tension to spread along the printed polymer pore channel, enabling the complete filling saturation of porous structures for enhanced tensile strength (up to 35.41 MPa), thermal (up to 25.29 Wm-1K-1) and electrical (>106 S m-1) conductivities. The designed 3D-printed microstructure-oriented can achieve synergistic anisotropy in mechanics (1.67), thermal (27.2), and electrical (>1012) conductivities. VMPC multifunction is demonstrated, including customized 3D electronics with elevated strength, electromagnetic wave-guided transport and signal amplification, heat dissipation device for chip temperature control, and storage components for thermoelectric generator energy conversion with light-heat-electricity.

Achieving Tunable Mechanoluminescence in CaZnOS:Tb3+, Sm3+ for Multicolor Stress Sensing

Mechanoluminescent (ML) materials can exhibit visible-to-near-infrared mechanoluminescence when responding to the fracture or deformation of a solid under mechanical stimulation. Transforming mechanical energy into light demonstrates promising applications in terms of visual mechanical sensing. In this work, we synthesized the phosphor CaZnOS:Tb3+, Sm3+, which exhibited intense and tunable multicolor mechanoluminescence without pre-irradiation. Intense green ML materials were obtained by doping Tb3+ with different concentrations. Tunable multicolor mechanoluminescence (such as green, yellow-green, and orange-red) could be realized by combining green emission (about 542 nm), attributed to Tb3+, and red emission (about 600 nm) generated from the Sm3+ in the CaZnOS substrate. The tunable multicolor ML materials CaZnOS:Tb3+, Sm3+ exhibited intense luminance and recoverable mechanoluminescence when responding to mechanical stimulation. Benefiting from the excellent ML performance and multicolor tunability in CaZnOS:Tb3+, Sm3+, we mixed the phosphor with PDMS and a curing agent to explore its practical application. An application for visual mechanical sensing was designed for handwriting identification. By taking a time-lapsed shot while writing, we easily obtained images of the writer's handwriting. The images of the ML intensity were acquired by using specific software to transform the shooting data. We could easily distinguish people's handwriting through analyzing the different ML performances.

Enhanced Pressure Response of Edge-Deposited Graphene Nanomechanical Resonators

Nanomechanical resonators made of suspended graphene exhibit high sensitivity to pressure changes. Nevertheless, the graphene resonator pressure performance is affected owing to the gas permeation problem between the graphene film and the substrate. Therefore, we prepared edge-deposited graphene resonators by focused ion beam (FIB) deposition of SiO2, and their gas leakage velocities and pressure-sensing ability were demonstrated. In this paper, we characterize the pressure-sensing response and gas leakage velocities of graphene membranes using an all-optical actuation system. The gas leakage velocities of graphene resonators with diameters of 10, 20, and 40 μm are reduced by 5.0 × 106, 2.0 × 107, and 8.1 × 107 atoms/s, respectively, which demonstrates that the edge deposition structure can reduce the gas leakage of the resonator. Furthermore, the pressure-sensing performance of three graphene resonators with different diameters was evaluated, and their average pressure sensitivities were calculated to be 3.4, 2.4, and 1.9 kHz/kPa, with the largest full-range hysteresis errors of 0.6, 0.7, and 1.0%, respectively. The temperature stabilities of the three sizes of resonators in the temperature range of 300-400 K are 0.016, 0.015, and 0.016%/K, and the maximum resonance frequency drift over 1 h is 0.0058, 0.0048, and 0.0112%, respectively. This work has great significance for the improvement of gas leakage velocity characterization of graphene membrane and graphene resonant pressure sensor performance optimization.

Multi-Mode Luminescence in Smart Near-Infrared Cr3+/Pr3+ Codoped SrGa12O19 Phosphors Induced by Three Distinct Excitation Mechanisms

Near-infrared (NIR) phosphors have emerged as novel luminescent materials across various fields due to their unique advantages of high penetration and invisibility. However, there is currently a lack of intelligent NIR phosphors that can achieve multimode stimuli responsive for sensing applications. In this study, we employed a high-temperature solid-phase reaction to incorporate Pr3+ into Cr3+-doped gallate magnetite SrGa12O19 phosphor, yielding a multimode luminescent intelligent NIR phosphor. Also, due to the inherent cation vacancies and defects in the matrix, the material not only exhibits brighter photoluminescence but also exhibits distinct NIR mechanoluminescence at a lower load. Notably, Pr3+-doped SrGa12O19:Cr3+ also demonstrates extended persistent luminescence and thermoluminescence effects. Finally, we combined the phosphor with the blue LED chip to develop a new multifunctional NIR pc-LED. Leveraging NIR's unique penetrating ability, it can persist in biological tissues for prolonged periods, enabling optical inspection and offering a novel approach to password protection for anticounterfeiting measures. This intelligent NIR phosphor solution significantly expands the application potential of NIR light in food quality assessment and analysis.

3D-Printed Ultracompact Multicore Fiber-Tip Probes for Simultaneous Measurement of Nanoforce and Temperature

Optical fiber force sensing has attracted considerable interest in biological, materials science, micromanipulation, and medical applications owing to its compact and cost-efficient configuration. However, the glass fiber has an intrinsic high Young's modulus, resulting in force sensors being generally less sensitive. While hyperelastic polymer materials can be utilized to enhance the force sensitivity, the thermodynamic properties of the polymer may weaken the sensing accuracy and reliability. Herein, we demonstrate ultracompact three-dimensional (3D)-printed multicore fiber (MCF) tip probes for simultaneous measurement of nanoforce and temperature with high sensitivity. The sensor is highly sensitive to force-induced deformation due to the special geometric features of the polymer microcantilever, and the high-temperature sensitivity can be implemented through the poly(dimethylsiloxane) (PDMS) microcavity on the same fiber facet. Moreover, the sensitivities of the fiber interferometers are remarkably enhanced by introducing the optical analogue of the Vernier effect. Such a device exhibits a force sensitivity of 56.35 nm/μN, which is more than 103 times that of all-silica fiber force sensors. The PDMS microcavity provides a temperature sensitivity of 1.447 nm/°C, measuring the local temperature of the probe and compensating for temperature crosstalk of the force detection. The proposed compact MCF-tip sensor can simultaneously measure nanoforce and temperature with high sensitivity, facilitating multiparameter sensing in a restricted space environment and showing the potential in miniaturized all-fiber multiparameter sensors.

Near-Infrared Dual-Modal Sensing of Force and Temperature in Total Knee Replacement Using Mechanoluminescent Phosphor of Sr3Sn2O7: Nd, Yb

Knee replacement surgery confronts challenges including patient dissatisfaction and the necessity for secondary procedures. A key requirement lies in dual-modal measurement of force and temperature of artificial joints during postoperative monitoring. Here, a novel non-toxic near-infrared (NIR) phosphor Sr3Sn2O7:Nd, Yb, is designed to realize the dual-modal measurement. The strategy is to entail phonon-assisted upconversion luminescence (UCL) and trap-controlled mechanoluminescence (ML) in a single phosphor well within the NIR biological transmission window. The phosphor is embedded in medical bone cement forming a smart joint in total knee replacements illustrated as a proof-of-concept. The sensing device can be charged in vitro by a commercial X-ray source with a safe dose rate for ML, and excited by a low power 980 nm laser for UCL. It attains impressive force and temperature sensing capabilities, exhibiting a force resolution of 0.5% per 10 N, force detection threshold of 15 N, and a relative temperature sensitive of up to 1.3% K-1 at 309 K. The stability against humidity and thermal shock together with the robustness of the device are attested. This work introduces a novel methodological paradigm, paving the way for innovative research to enhance the functionality of artificial tissues and joints in living organisms.

Microstrain-Stimulated Elastico-Mechanoluminescence with Dual-Mode Stress Sensing

Elastico-mechanoluminescence technology has shown significant application prospects in stress sensing, artificial skin, remote interaction, and other research areas. Its progress mainly lies in realizing stress visualization and 2D or even 3D stress-sensing effects using a passive sensing mode. However, the widespread promotion of mechanoluminescence (ML) technology is hindered by issues such as high stress or strain thresholds and a single sensing mode based on luminous intensity. In this study, a highly efficient green-emitting ML with dual-mode stress-sensing characteristics driven by microscale strain is developed using LiTaO3:Tb3+. In addition to single-mode sensing based on the luminous intensity, the self-defined parameter (Q) is also introduced as a dual-mode factor for sensing the stress velocity. Impressively, the fabricated LiTaO3:Tb3+ film is capable of generating discernible ML signals even when supplied with strains as low as 500 µst. This is the current minimum strain value that can drive green-emitting ML. This study offers an ideal photonic platform for exploring the potential applications of rare-earth-doped elastico-ML materials in remote interaction devices, high-precision stress sensors, and single-molecule biological imaging.

Hydrogels with Differentiated Hydrogen-Bonding Networks for Bioinspired Stress Response

Stress response, an intricate and autonomously coordinated reaction in living organisms, holds a reversible, multi-path, and multi-state nature. However, existing stimuli-responsive materials often exhibit single-step and monotonous reactions due to the limited integration of structural components. Inspired by the cooperative interplay of extensor and flexor cells within Mimosa's pulvini, we present a hydrogel with differentiated hydrogen-bonding (H-bonding) networks designed to enable the biological stress response. Weak H-bonding domains resemble flexor cells, confined within a hydrophobic network stabilized by strong H-bonding clusters (acting like extensor cells). Under external force, strong H-bonding clusters are disrupted, facilitating water diffusion from the bottom layer and enabling transient expansion pressure gradient along the thickness direction. Subsequently, water diffuses upward, gradually equalizing the pressure, while weak H-bonding domains undergo cooperative elastic deformation. Consequently, the hydrogel autonomously undergoes a sequence of reversible and pluralistic motion responses, similar to Mimosa's touch-triggered stress response. Intriguingly, it exhibits stress-dependent color shifts under polarized light, highlighting its potential for applications in time-sensitive "double-lock" information encryption systems. This work achieves the coordinated stress response inspired by natural tissues using a simple hydrogel, paving the way for substantial advancements in the development of intelligent soft robots.

Bright Circularly Polarized Mechanoluminescence from 0D Hybrid Manganese Halides

Hybrid metal halides (HMHs) with efficient circularly polarized luminescence (CPL) have application prospects in many fields, due to their abundant host-guest structures and high photoluminescence quantum yield (PLQY). However, CPLs in HMHs are predominantly excited by light or electricity, limiting their use in multivariate environments. It is necessary to explore a novel excitation method to extend the application of chiral HMHs as smart stimuli-responsive optical materials. In this work, an enantiomeric pair of 0D hybrid manganese bromides, [H2(2R,4R)-(+)/(2S,4S)-(-)-2,4-bis(diphenylphosphino)pentane]MnBr4 [(R/S)-1] is presented, which exhibits efficient CPL emissions with near-unity PLQYs and high dissymmetry factors of ± 2.0 × 10-3. Notably, (R/S)-1 compounds exhibit unprecedented and bright circularly polarized mechanoluminescence (CPML) emissions under mechanical stimulation. Moreover, (R/S)-1 possess high mechanical force sensitivities with mechanoluminescence (ML) emissions detectable under 0.1 N force stimulation. Furthermore, this ML emission exhibits an extraordinary antithermal quenching effect in the temperature range of 300-380 K, which is revealed to originate from a thermal activation energy compensation mechanism from trap levels to Mn(II) 4T1 level. Based on their intriguing optical properties, these compounds as chiral force-responsive materials are demonstrated in multilevel confidential information encryption.

Microphase-Separated Elastic and Ultrastretchable Ionogel for Reliable Ionic Skin with Multimodal Sensation

Bioinspired artificial skins integrated with reliable human-machine interfaces and stretchable electronic systems have attracted considerable attention. However, the current design faces difficulties in simultaneously achieving satisfactory skin-like mechanical compliance and self-powered multimodal sensing. Here, this work reports a microphase-separated bicontinuous ionogel which possesses skin-like mechanical properties and mimics the multimodal sensing ability of biological skin by ion-driven stimuli-electricity conversion. The ionogel exhibits excellent elasticity and ionic conductivity, high toughness, and ultrastretchability, as well as a Young's modulus similar to that of human skin. Leveraging the ion-polymer interactions enabled selective ion transport, the ionogel can output pulsing or continuous electrical signals in response to diverse stimuli such as strain, touch pressure, and temperature sensitively, demonstrating a unique self-powered multimodal sensing. Furthermore, the ionogel-based I-skin can concurrently sense different stimuli and decouple the variations of the stimuli from the voltage signals with the assistance of a machine-learning model. The ease of fabrication, wide tunability, self-powered multimodal sensing, and the excellent environmental tolerance of the ionogels demonstrate a new strategy in the development of next-generation soft smart mechano-transduction devices.

Wearable strain sensor integrating mechanoluminescent fiber with a flexible printed circuit

This paper reports an optical strain sensor that integrates a self-powered mechanoluminescent (ML) elastic fiber with a flexible circuit. The inclusion of an alumina nanoparticle as the additive results in seven-fold enhancement of ML intensity while maintaining flexibility of 120% strain. The sensor facilitates the detection of strain and stretching speed. It attains a sensitivity of 0.0022 lx/(1% strain) and a resolution of 0.2% strain, respectively. We have successfully applied it to detect bending motions of the finger, wrist, and elbow. This wearable strain sensor holds promise for diverse applications in wearable technology.

Pressure-Induced Remarkable Spectral Red-Shift in Mn2+ -Activated NaY9 (SiO4 )6 O2 Red-Emitting Phosphors for High-Sensitive Optical Manometry

To settle the low sensitivity of luminescent manometers, the Mn2+ -activated NaY9 (SiO4 )6 O2 red-emitting phosphors with splendid pressure sensing performances are developed. Excited by 408 nm, the resulting products emit bright red emission originating from 4 T1 (4 G) → 6 A1 transition of Mn2+ , in which the optimal concentration of the activator ion is ≈1 mol%. Moreover, the admirable thermal stability of the developed phosphors is studied and confirmed by the temperature-dependent emission spectra, based on which the activation energy is derived to be 0.275 eV. By analyzing the pressure-dependent Raman spectra, the structural stability of the synthesized compounds at extreme conditions is verified. Furthermore, the designed phosphors exhibit remarkable spectral red-shift at elevated pressure. Especially, as pressure increases from 0.75 to 7.16 GPa, the emission band centroid shifts from 617.2 to 663.4 nm, resulting in a high sensitivity (dλ/dP) of 7.00 nm GPa-1 , whereas the full width at half maximum (FWHM) increases from 83.0 to 110.6 nm, leading to the ultra-high sensitivity (dFWHM/dP) of 10.13 nm GPa-1 . These achievements manifest that the designed red-emitting phosphors are appropriate for ultrasensitive optical manometry. More importantly, the developed manometer is a current global leader in sensitivity, when operating in the band-width mode, that is, FWHM.

Visualized Stress-Temperature Sensor with the Zinc Sulfide and Perovskite Glass Ceramics Composite

The visualized dual-modal stress-temperature sensing refers to the ability of a sensor to provide real-time and visible information about both stress and temperature and has indeed attracted significant interest in various fields. However, the development of convenient methods for achieving this capability remains a challenge. In this work, a dual-modal stress-temperature sensor is successfully fabricated using a ZnS/Cu@CsPbBr1.2I1.8 glass ceramics (GCs)/polydimethylsiloxane (PDMS) (ZCP) composite film. The tunable ML color is achieved by modulating the concentration of CsPbBr1.2I1.8 GCs in the ZCP composite films based on the light conversion process from ZnS/Cu to CsPbBr1.2I1.8 GCs. Additionally, the stress and temperature can be visualized simultaneously by integrating the ML intensity and ML color of the ZCP composite film. This feature allows for the real-time monitoring of automotive tire temperature by embedding the ZCP composite film on the tire surface, enabling a strong and stable response to both stress and temperature changes. Overall, this work offers a convenient, efficient, and repeatable approach for achieving visualized dual-modal stress-temperature sensing in the fields of mechanical engineering, structural health monitoring, and intelligent devices.

3D Printed Polymer Piezoelectric Materials: Transforming Healthcare through Biomedical Applications

Three-dimensional (3D) printing is a promising manufacturing platform in biomedical engineering. It offers significant advantages in fabricating complex and customized biomedical products with accuracy, efficiency, cost-effectiveness, and reproducibility. The rapidly growing field of three-dimensional printing (3DP), which emphasizes customization as its key advantage, is actively searching for functional materials. Among these materials, piezoelectric materials are highly desired due to their linear electromechanical and thermoelectric properties. Polymer piezoelectrics and their composites are in high demand as biomaterials due to their controllable and reproducible piezoelectric properties. Three-dimensional printable piezoelectric materials have opened new possibilities for integration into biomedical fields such as sensors for healthcare monitoring, controlled drug delivery systems, tissue engineering, microfluidic, and artificial muscle actuators. Overall, this review paper provides insights into the fundamentals of polymer piezoelectric materials, the application of polymer piezoelectric materials in biomedical fields, and highlights the challenges and opportunities in realizing their full potential for functional applications. By addressing these challenges, integrating 3DP and piezoelectric materials can lead to the development of advanced sensors and devices with enhanced performance and customization capabilities for biomedical applications.

Flexible multicolor biaxial sensor for strain direction identification based on sandwich-structured mechanoluminescent materials

Strain sensors capable of recognizing the direction of strain are crucial in applications such as robot attitude adjustment and detection of strain states in complex structures. In this study, a sandwich-structured flexible biaxial strain sensor was developed using polydimethylsiloxane as the substrate, mechanoluminescent materials as the luminescent elements, and rubber-ink as the light-blocking layer. By correlating the emitted light color with the stretching state, precise identification of the applied strain direction is achieved. Additionally, the mechanoluminescence of the sensor is collected by a photodiode, generating photocurrent that can be analyzed. This provides a solution for practical applications of sensor.