A Redox-Active Covalent Organic Framework with Highly Accessible Aniline-Fused Quinonoid Units Affords Efficient Proton Charge Storage

2D Conjugated Metal-Organic Frameworks Bearing Large Pore Apertures and Multiple Active Sites for High-Performance Aqueous Dual-Ion Batteries

2D conjugated metal-organic frameworks (2D c-MOFs) with large pore sizes and high surface areas are advantageous for adsorbing iodine species to enhance the electrochemical performance of aqueous dual-ion batteries (ADIBs). However, most of the reported 2D c-MOFs feature microporous structures, with few examples exhibiting mesoporous characteristics. Herein, we developed two mesoporous 2D c-MOFs, namely PA-TAPA-Cu-MOF and PA-PyTTA-Cu-MOF, using newly designed arylimide based multitopic catechol ligands (6OH-PA-TAPA and 8OH-PA-PyTTA). Notably, PA-TAPA-Cu-MOF exhibits the largest pore sizes (3.9 nm) among all reported 2D c-MOFs. Furthermore, we demonstrated that these 2D c-MOFs can serve as promising cathode host materials for polyiodides in ADIBs for the first time. The incorporation of triphenylamine moieties in PA-TAPA-Cu-MOF resulted in a higher specific capacity (423.4 mAh g-1 after 100 cycles at 1.0 A g-1) and superior cycling performance, retaining 96 % capacity over 1000 cycles at 10 A g-1 compared to PA-PyTTA-Cu-MOF. Our comparative analysis revealed that the increased number of N anchoring sites and larger pore size in PA-TAPA-Cu-MOF facilitate efficient anchoring and conversion of I3 -, as supported by spectroscopic electrochemistry and density functional theory calculations.

A Cu/MnOx Composite with Copper-Doping-Induced Oxygen Vacancies as a Cathode for Aqueous Zinc-Ion Batteries

Aqueous zinc-ion batteries are anticipated to be the next generation of important energy storage devices to replace lithium-ion batteries due to the ongoing use of lithium resources and the safety hazards associated with organic electrolytes in lithium-ion batteries. Manganese-based compounds, including MnOx materials, have prominent places among the many zinc-ion battery cathode materials. Additionally, Cu doping can cause the creation of an oxygen vacancy, which increases the material's internal electric field and enhances cycle stability. MnOx also has great cyclic stability and promotes ion transport. At a current density of 0.2 A g-1, the Cu/MnOx nanocomposite obtained a high specific capacitance of 304.4 mAh g-1. In addition, Cu/MnOx nanocomposites showed A high specific capacity of 198.9 mAh g-1 after 1000 cycles at a current density of 0.5 A g-1. Therefore, Cu/MnOx nanocomposites are expected to be a strong contender for the next generation of zinc-ion battery cathode materials in high energy density storage systems.

Realization of Long-Life Proton Battery by Layer Intercalatable Electrolyte

Proton batteries have attracted increasing interests because of their potential for grid-scale energy storage with high safety and great low-temperature performances. However, their development is significantly retarded by electrolyte design due to free water corrosion. Herein, we report a layer intercalatable electrolyte (LIE) by introducing trimethyl phosphate (TMP) into traditional acidic electrolyte. Different from conventional role in batteries, the presence of TMP intriguingly achieves co-intercalation of solvent molecules into the interlayer of anode materials, enabling a new working mechanism for proton reactions. The electrode corrosion was also strongly retarded with expanded electrochemical stability window. The half-cell therefore showed an outstanding long-term cycling stability with 91.0 % capacity retention at 5 A g-1 after 5000 cycles. Furthermore, the assembled full batteries can even deliver an ultra-long lifetime with a capacity retention of 74.9 % for 2 months running at -20 °C. This work provides new opportunities for electrolyte design of aqueous batteries.

Covalent organic frameworks and their composites for rechargeable batteries

Covalent organic frameworks (COFs), characterized by well-ordered pores, large specific surface area, good stability, high precision, and flexible design, are a promising material for batteries and have received extensive attention from researchers in recent years. Compared with inorganic materials, COFs can construct elastic frameworks with better structural stability, and their chemical compositions and structures can be precisely adjusted and functionalized at the molecular level, providing an open pathway for the convenient transfer of ions. In this review, the energy storage mechanism and unique superiority of COFs and COF composites as electrodes, separators and electrolytes for rechargeable batteries are discussed in detail. Special emphasis is placed on the relationship between the establishment of COF structures and their electrochemical performance in different batteries. Finally, this review summarizes the challenges and prospects of COFs and COF composites in battery equipment.

Positional Thiophene Isomerization: A Geometric Strategy for Precisely Regulating the Electronic State of Covalent Organic Frameworks to Boost Oxygen Reduction

With the oxygen conversion efficiency of metal-free carbon-based fuel cells dramatically improved, the building blocks of covalent organic frameworks (COFs) raised principal concerns on the catalytic active sites with indistinct electronic states. Herein, to address this issue, we demonstrate COFs for oxygen reduction reaction (ORR) by regulating the edge-hanging thiophene units, and the molecular geometries are further modulated via positional thiophene isomerization strategy, affording isomeric COF-α with 2-substitution and COF-β with 3-substitution on the frameworks. The electronic states and intermediate adsorption ability are well-regulated through geometric modification, resulting in controllable chemical activity and local density of π-electrons. Notably, the introduction of thiophene units with different substitution positions into a pristine pure carbon-based COF model COF-Ph achieves excellent activity with a half-wave potential of 0.76 V versus the reversible hydrogen electrode, which is higher than most of those metal-free or metal-based electrocatalysts. Utilizing the combination of theoretical prediction and in situ Raman spectra, we show that the isomeric thiophene skeleton (COF-α and COF-β) can induce the dangling unit activation, accurately identifying the pentacyclic-carbon (thiophene α-position) adjacent to sulfur atom as active sites. The results suggest that the isomeric dangling groups in COFs are suitable for the ORR with promising geometry construction.

Recent Progress in Covalent Organic Frameworks for Cathode Materials

Covalent organic frameworks (COFs) are constructed from small organic molecules through reversible covalent bonds, and are therefore considered a special type of polymer. Small organic molecules are divided into nodes and connectors based on their roles in the COF's structure. The connector generally forms reversible covalent bonds with the node through two reactive end groups. The adjustment of the length of the connector facilitates the adjustment of pore size. Due to the diversity of organic small molecules and reversible covalent bonds, COFs have formed a large family since their synthesis in 2005. Among them, a type of COF containing redox active groups such as -C=O-, -C=N-, and -N=N- has received widespread attention in the field of energy storage. The ordered crystal structure of COFs ensures the ordered arrangement and consistent size of pores, which is conducive to the formation of unobstructed ion channels, giving these COFs a high-rate performance and a long cycle life. The voltage and specific capacity jointly determine the energy density of cathode materials. For the COFs' cathode materials, the voltage plateau of their active sites' VS metallic lithium is mostly between 2 and 3 V, which has great room for improvement. However, there is currently no feasible strategy for this. Therefore, previous studies mainly improved the theoretical specific capacity of the COFs' cathode materials by increasing the number of active sites. We have summarized the progress in the research on these types of COFs in recent years and found that the redox active functional groups of these COFs can be divided into six subcategories. According to the different active functional groups, these COFs are also divided into six subcategories. Here, we summarize the structure, synthesis unit, specific surface area, specific capacity, and voltage range of these cathode COFs.

Synchronous Redox Reactions in Copper Oxalate Enable High-Capacity Anode for Proton Battery

Proton batteries are competitive due to their merits such as high safety, low cost, and fast kinetics. However, it is generally difficult for current studies of proton batteries to combine high capacity and high stability, while the research on proton storage mechanism and redox behavior is still in its infancy. Herein, the polyanionic layered copper oxalate is proposed as the anode for a high-capacity proton battery for the first time. The copper oxalate allows for reversible proton insertion/extraction through the layered space but also achieves high capacity through synchronous redox reactions of Cu2+ and C2O42-. During the discharge process, the bivalent Cu-ion is reduced, whereas the C═O of the oxalate group is partially converted to C-O. This synchronous behavior presents two units of charge transfer, enabling the embedding of two units of protons in the (110) crystal face. As a result, the copper oxalate anode demonstrates a high specific capacity of 226 mAh g-1 and maintains stable operation over 1000 cycles with a retention of 98%. This work offers new insights into the development of dual-redox electrode materials for high-capacity proton batteries.