Zinc‐Catalyzed Domino Hydroamination–Alkyne Addition

Copper(I) complexes bearing pyrrole-bridged S,N and N-donor ligands as catalysts for tandem hydroamination-alkynylation: effect of anions on product formation

In this study, the reaction between 2-(3,5-dimethylpyrazolylmethyl)-5-(dimethylaminomethyl)pyrrole and thiophenol under heating conditions afforded the new ligand 2-(3,5-dimethylpyrazolylmethyl)-5-(phenylthiomethyl)pyrrole 2. The reaction of 2 with meta-chloroperbenzoic acid provided sulfoxide 3 and sulfone 4 group-containing ligands. The reaction of 2 with copper(I) halides provided the binuclear complexes [Cu(μ-X){μ-C4H3N-2-(CH2Me2pz)-5-(CH2SPh)-κ2-S,N}]2 (X = Cl, Br and I, 5-7) in high yields. Conversely, the analogous reaction of 4 with copper(I) halides yielded two types of complexes, three coordinate bi- and mononuclear of the type [Cu(μ-Cl){C4H3N-2-(CH2Me2pz)-5-(CH2SO2Ph)-κ1-N}]28 and [CuX{C4H3N-2-(CH2Me2pz)-5-(CH2SO2Ph)-κ1-N}2], X = Br, 9 and I, 10. When the reaction was carried out in the presence of KPF6, the two-coordinate complex [Cu{C4H3N-2-(CH2Me2pz)-5-(CH2SO2Ph)-κ1-N}2]PF6-11a was isolated, whereas its BF4- analogue 11b was synthesized by the reaction of 8 with AgBF4. The structures of these complexes were determined using single-crystal X-ray crystallography. These copper complexes catalyzed the hydroamination-alkynylation reaction between several secondary amines and alkyl and aryl terminal alkynes. Using 1 mol% of complexes 5-10 as catalysts, both tri- and tetra-substituted propargylamines were isolated. Alternatively, phenylacetylene and different secondary amines afforded the corresponding trisubstituted propargylamines as the major products and alkyl terminal alkynes gave the tetrasubstituted products in excellent yields. In addition, the role of counter anions such as TfO-, PF6-, BF4-, PO43- and Ph4B- on the product selectivity was studied. When fluorinated anions such as TfO-, PF6-, and BF4- were present with the copper complexes, the hydroamination-hydrovinylation product 1-aminodiene 23 was observed, which was not formed with PO43-, Ph4B- or halide ions. Specifically, TfO- and PF6- favored the formation of 23, while BF4- favored the tetrasubstituted product as the major product. This was further supported by the isolated copper(I) complexes containing PF6- and BF4- and by other specific reactions. The peaks for enamines and [LCu]+ species in the HRMS spectra of the reaction mixtures and the isolation of the morpholinium copper(I) salt support the proposed mechanism.

Tri-coordinated zinc alkyl complexes with N^S/Se coordination of imino-phosphanamidinate chalcogenide ligands as precursors for efficient hydroboration of nitriles and esters

A series of tri-coordinated zinc alkyl complexes with the general molecular formula [κ2NE-{NHIRP(Ph)(E)N-Dipp}ZnEt] [R = Dipp (2,6-diisopropylphenyl), E = S (3a), Se (3b) and R = tBu (tert-butyl), E = S (4a), Se (4b)] bearing imino-phosphanamidinate chalcogenide ligands were prepared in good yields from the reaction between the protic imino-phosphanamidinate chalcogenide ligand [NHIRP(Ph)(E)NH-Dipp] [R = Dipp, E = S (1a), Se (1b) and R = tBu, E = S (2a), Se (2b)] and diethylzinc at room temperature. The molecular structures of all the zinc complexes were established by single-crystal X-ray diffraction analysis. In the solid state, all complexes exhibited a distorted trigonal planar geometry around the zinc ion. Metal-chalcogenide (Zn-S/Se) interactions were observed in the coordination sphere. These zinc alkyl complexes were employed as pre-catalysts in the hydroboration reaction of nitriles and esters to obtain the corresponding N,N-diborylamines and boronate esters, respectively, under ambient conditions. A wide substrate scope of nitriles and esters is presented.

Chemodivergent Synthesis of Oxazolidin-2-ones via Cu-Catalyzed Carboxyl Transfer Annulation of Propiolic Acids with Amines

Carboxylic acids are widely found in natural products and bioactive molecules and have served as raw material compounds in industry. We now report the first example of copper(I)-catalyzed carboxyl transfer annulation of propiolic acids with amines, thereby chemodivergently constructing the oxazolidine-2-ones. In this reaction, two kinds of key propargyamine intermediates were formed through sequential CuI/NBS-catalyzed oxidative deamination/decarboxylative alkynylation or CuI-catalyzed decarboxylative hydroamination/alkynylation. The advantages of this decarboxylative coupling/carboxylative cyclization are showcased in the atom economy, chemical specificity, and functional group tolerance.

2:1 versus 1:1 Coupling of Alkylacetylenes with Secondary Amines: Selectivity Switching in 8-Quinolinolato Rhodium Catalysis

Both 2:1 and 1:1 couplings of alkylacetylenes with secondary amines were achieved using 8-quinolinolato rhodium catalysts and CsF. The 2:1/1:1 selectivity was switched by choosing the reaction solvent. In DMA, an unprecedented 2:1 coupling reaction of alkylacetylenes with amines proceeded to give 2-aminodiene products. One-pot 2:1 coupling/reduction provided rapid access to various allylamines, while one-pot coupling/hydrolysis gave enones as products. In toluene, anti-Markovnikov hydroamination occurred under relatively mild conditions to give 1:1 coupling products.

Synthetic Access to Secondary Propargylamines via a Copper-Catalyzed Oxidative Deamination/Alkynylation Cascade

A novel and selective cascade reaction of primary amines and alkynes for the synthesis of the corresponding secondary propargylamines is described. This protocol proceeds with a CuBr₂/TBHP system through a process of oxidative deamination of primary amines to imine and alkynylation, featuring a wide scope of substrates with good functional-group tolerance and operational simplicity. Additionally, the use of two different primary amines could also work smoothly using this protocol.

Zn-Catalyzed Multicomponent KA2 Coupling: One-Pot Assembly of Propargylamines Bearing Tetrasubstituted Carbon Centers

Tetrasubstituted propargylamines comprise a unique class of highly useful compounds, which can be accessed through the multicomponent coupling between ketones, amines, and alkynes (KA² coupling), an underexplored transformation. Herein, the development of a novel, highly efficient, and user-friendly catalytic system for the KA² coupling, based on the environmentally benign, inexpensive, and readily available zinc acetate, is described. This system is employed in the multicomponent assembly of unprecedented, tetrasubstituted propargylamines derived from structurally diverse, challenging, and even biorelevant substrates. Notable features of this protocol include the demonstration of the enhancing effect that neat conditions can have on catalytic activity, as well as the expedient functionalization of hindered, prochiral cyclohexanones, linear ketones, and interesting molecular scaffolds such as norcamphor and nornicotine.

Phenalenyl-based organozinc catalysts for intramolecular hydroamination reactions: a combined catalytic, kinetic, and mechanistic investigation of the catalytic cycle

Herein, we report the synthesis and characterization of two organozinc complexes that contain symmetrical phenalenyl (PLY)-based N,N-ligands. The reactions of phenalenyl-based ligands with ZnMe(2) led to the formation of organozinc complexes [N(Me),N(Me)-PLY]ZnMe (1) and [N(iPr),N(iPr)-PLY]ZnMe (2) under the evolution of methane. Both complexes (1 and 2) were characterized by NMR spectroscopy and elemental analysis. The solid-state structures of complexes 1 and 2 were determined by single-crystal X-ray crystallography. Complexes 1 and 2 were used as catalysts for the intramolecular hydroamination of unactivated primary and secondary aminoalkenes. A combined approach of NMR spectroscopy and DFT calculations was utilized to obtain better insight into the mechanistic features of the zinc-catalyzed hydroamination reactions. The progress of the catalysis for primary and secondary aminoalkene substrates with catalyst 2 was investigated by detailed kinetic studies, including kinetic isotope effect measurements. These results suggested pseudo-first-order kinetics for both primary and secondary aminoalkene activation processes. Eyring and Arrhenius analyses for the cyclization of a model secondary aminoalkene substrate afforded ΔH(≠) =11.3 kcal mol(-1) , ΔS(≠) =-35.75 cal K(-1)  mol(-1) , and E(a) =11.68 kcal mol(-1) . Complex 2 exhibited much-higher catalytic activity than complex 1 under identical reaction conditions. The in situ NMR experiments supported the formation of a catalytically active zinc cation and the DFT calculations showed that more active catalyst 2 generated a more stable cation. The stability of the catalytically active zinc cation was further supported by an in situ recycling procedure, thereby confirming the retention of catalytic activity of compound 2 for successive catalytic cycles. The DFT calculations showed that the preferred pathway for the zinc-catalyzed hydroamination reactions is alkene activation rather than the alternative amine-activation pathway. A detailed investigation with DFT methods emphasized that the remarkably higher catalytic efficiency of catalyst 2 originated from its superior stability and the facile formation of its cation compared to that derived from catalyst 1.