The Copper‐Catalyzed C‐3‐Formylation of Indole CH Bonds using Tertiary Amines and Molecular Oxygen

Designing Cobalt(II) Complex for Chemoselective Synthesis of 2-Aryl-3-Formyl Indoles from Amino Alcohols and Alcohols†

An air-stable, inexpensive, and isolable cobalt(II) complex (C1) of N-((1-methyl-1H-imidazol-2-yl)methyl)-2-(phenylselanyl)ethan amine (L1) was synthesized and characterized. The complex was used to catalyze a one-pot cascade reaction between 2-(2-aminophenyl)ethanols and benzyl alcohol derivatives. Interestingly, 2-aryl-3-formylindole derivatives were formed instead of N-alkylated or C-3 alkylated indoles. A broad substrate scope can be activated using this protocol with only 5.0 mol % catalyst loading to achieve up to 87 % yield of 2-aryl-3-formylindole derivatives. The mechanistic studies suggested that the reaction proceeds through tandem imine formation followed by cyclization.

Photocatalytic Pyridine Synthesis with Enaminones and TMEDA under Metal-Free Conditions

Reported herein is a new photocatalytic annulation for the synthesis of 2,3,4,6-tetrasubstituted pyridines with enaminones and N,N,N',N'-tetramethyl ethylenediamine (TMEDA). The photocatalytic reactions take place without requiring a transition metal reagent and provide products with broad scope. The methyl in TMEDA acts as the carbon source in pyridine ring construction, and BrCF2CO2Et plays the role of the terminal oxidant for free radical quenching.

TBHP/Et3N-Promoted Chemoselective Formylation and Peroxidation of Pyrrolo[2,1-a]isoquinolines

An efficient formylation of pyrrolo[2,1-a]isoquinoline derivatives has been reached by the use of TBHP (tBuOOH) and Et3N as the mediator. In this strategy, CHO and CDO can be readily incorporated into heteroarenes by the utilization of CHCl3 and CDCl3 as the carbonyl sources. Interestingly, a solvent-controlled chemoselectivity was observed. The use of PhCl as a solvent resulted in dearomatization and peroxidation of pyrrolo[2,1-a]isoquinolines, delivering functionalized peroxides in 53-64% yields.

HAT-Mediated Electrochemical C(sp2)-H Acylation of Quinolines with Alcohols

Herein, an electrochemical hydrogen atom transfer (HAT) strategy for C(sp2)-H formylation of electron-deficient quinolines and isoquinolines is described. The cheap methanol acts as a formyl source with a catalytic amount of N-hydroxyphthalimide (NHPI) as the hydrogen atom transfer (HAT) catalyst. The advantages of this reaction are transition-metal-catalyst- and chemical-oxidant-free conditions, and the protocol could also be applied to the direct C(sp2)-H acetylation or propionylation of quinolines.

Recent Advances On Direct Formylation Reactions

Aldehydes serve as the key functional group in organic synthesis and are valuable intermediates. The various advanced methods of direct formylation reactions have been reviewed in this article. Overcoming the drawbacks of the traditional methods of formylation, newer methods involving homo and heterogenous catalysts, one pot reactions, solvent free techniques are elaborated, which can be performed under mild conditions and using inexpensive resources.

Synthesis of C-1 Deuterated 3-Formylindoles by Organophotoredox Catalyzed Direct Formylation of Indoles with Deuterated Glyoxylic Acid

Direct formylation of feedstock indoles with newly developed, cost-effective deuterated glyoxylic acid as formylation agent under visible light and air (O₂) as terminal oxidant has been developed. An isatin byproduct produced from the corresponding indole reactant serves as a facilitator for the formylation process. The simple, mild, metal- and oxidant-free protocol enables the synthesis of structurally diverse C1-deuterated 3-formylindoles with broad functional group tolerance and late-stage functionalization at a high level of D-incorporation (95-99%).

New Avenues in Copper-Mediated Trifluoromethylation Reactions Using Fluoroform as the CF3 Source

Organic molecules containing the trifluoromethyl (CF3) group play a vital role in pharmaceuticals, agrochemicals, and materials. New trifluoromethylation methods should encompass capabilities to address issues in efficiency, selectivity, and CF3 source all at once. Fluoroform (CF3H), an industrial byproduct, has emerged as an attractive CF3 source. The reaction profile of the [CuCF3] reagent derived from fluo­roform has surpassed its original applications in cross-coupling-type trifluoromethylation. We have discovered a host of unique copper-mediated trifluoromethylation reactions using [CuCF3] from fluoroform, especially under oxidative conditions, to deliver efficient and selective synthesis of trifluoromethylated compounds.

1 Introduction

2 Construction of C–CF3 Bonds for the Synthesis of Trifluoromethylated Building Blocks

2.1 C(sp)–CF3 Bond Formation

2.2 C(sp2)–CF3 Bond Formation

2.3 C(sp3)–CF3 Bond Formation

3 Domino Synthesis of Trifluoromethylated Heterocycles

3.1 3-(Trifluoromethyl)indoles

3.2 3-(Trifluoromethyl)benzofurans

3.3 2-(Trifluoromethyl)indoles

4 Trifluoromethylative Difunctionalization of Arynes

4.1 Trifluoromethylation–Allylation of Arynes

4.2 1,2-Bis(trifluoromethylation) of Arynes

5 Pentafluoroethylation of Unactivated Alkenes

6 Conclusion

Formylation and Bromination of Pyrrolo[2,1-a]isoquinoline Derivatives with Bromoisobutyrate and Dimethyl Sulfoxide

We have developed an efficient formylation of pyrroloisoquinolines using bromoisobutyrate and dimethyl sulfoxide as carbonyl reagent. Various formylated pyrroloisoquinolines could be prepared in good yields (up to 94%). This formylation process can be easily scaled up to gram scale with good yield. In most cases of pyrroloisoquinolines without methoxy groups, the combination of bromoisobutyrate and dimethyl sulfoxide could act as a bromination reagent, delivering brominated pyrroloisoquinolines in acceptable to good yields (up to 82%).

N,N,N',N'-Tetramethylethylenediamine-Enabled Photoredox-Catalyzed C-H Methylation of N-Heteroarenes

Aiming at the valuable methylation process, readily available and inexpensive N,N,N',N'-tetramethylethylenediamine (TMEDA) was first identified as a new methyl source in photoredox-catalyzed transformation in this work. By virtue of this simple methylating reagent, a facile and practical protocol for the direct C-H methylation of N-heteroarenes was developed, featuring mild reaction conditions, broad substrate scope, and scalability. Mechanistic studies disclosed that a sequential photoredox, base-assisted proton shift, fragmentation, and tautomerization process was essentially involved.

Molecular iodine mediated oxidative cleavage of the C–N bond of aryl and heteroaryl (dimethylamino)methyl groups into aldehydes

An efficient iodine mediated conversion of aryl or heteroaryl (dimethylamino)methyl compunds to aryl or heteroaryl aldehydes is achieved via cleavage of C-N bond.

Transition metal-catalyzed C–H functionalizations of indoles

This review summarises a wide range of transformations on the indole skeleton, including arylation, alkenylation, alkynylation, acylation, nitration, borylation, and amidation, using transition-metal catalyzed C–H functionalization as the key step.

Isolation and synthesis of cryptosanguinolentine (isocryptolepine), a naturally-occurring bioactive indoloquinoline alkaloid

Cryptosanguinolentine (isocryptolepine) is one of the minor naturally-occurring monomeric indoloquinoline alkaloids, isolated from the West African climbing shrub Cryptolepis sanguinolenta. The natural product displays such a simple and unique skeleton, which chemists became interested in well before it was found in Nature. Because of its structure and biological activity, the natural product has been targeted for synthesis on numerous occasions, employing a wide range of different strategies. Hence, discussed here are aspects related to the isolation of isocryptolepine, as well as the various approaches toward its total synthesis.

Rhodium(III)-Catalyzed Decarboxylative Aminomethylation of Glycine Derivatives with Indoles via C-H Activation

A rhodium(III)-catalyzed decarboxylative aminomethylation of glycine derivatives with indoles bearing a pyrimidine directing group was developed via C-H activation, exclusively affording the corresponding aminomethylated products with C3 selectivity. In this synthetic protocol, easily available and resourceful arylglycines were utilized as aminomethyl functional moieties.

Copper- and DMF-mediated switchable oxidative C–H cyanation and formylation of imidazo[1,2-a]pyridines using ammonium iodide

The cyanation and formylation of imidazo[1,2-a]pyridines were developed under copper-mediated oxidative conditions using ammonium iodide and DMF as a nontoxic combined cyano-group source and DMF as a formylation reagent.

Electrochemically Enabled C3-Formylation and -Acylation of Indoles with Aldehydes

Reported herein is an effective strategy for oxidative cross-coupling of indoles with various aldehydes. The strategy is based on a two-step transformation via a well-known Mannich-type reaction and a C-N bond cleavage for carbonyl introduction. The key step-the C-N bond cleavage of the Mannich product-was enabled by electrochemistry. This strategy (with over 40 examples) ensures excellent functional-group tolerance as well as late-stage functionalization of pharmaceutical molecules.

Electrochemical Transition-Metal-Catalyzed C-H Bond Functionalization: Electricity as Clean Surrogates of Chemical Oxidants

Transition-metal-catalyzed C-H activation has attracted much attention from the organic synthetic community because it obviates the need to prefunctionalize substrates. However, superstoichiometric chemical oxidants, such as copper- or silver-based metal oxidants, benzoquinones, organic peroxides, K₂ S₂ O₈ , hypervalent iodine, and O₂ , are required for most of the reactions. Thus, the development of environmentally benign and user-friendly C-H bond activation protocols, in the absence of chemical oxidants, are urgently desired. The inherent advantages and unique characteristics of organic electrosynthesis make fill this gap. Herein, recent progress in this area (until the end of September 2018) is summarized for different transition metals to highlight the potential sustainability of electro-organic chemistry.

Synthesis of 2-(Trifluoromethyl)indoles via Domino Trifluoromethylation/Cyclization of 2-Alkynylanilines

A new method for the synthesis of 2-(trifluoromethyl)indoles using easily accessible 2-alkynylanilines and a well-established fluoroform-derived CuCF₃ reagent is described. This method utilizes a domino trifluoromethylation/cyclization strategy to construct the indole cores with no ambiguity of the CF₃ position. The intriguing 3-formyl-2-(trifluoromethyl)indoles can also be synthesized by this protocol, which are useful intermediates for the preparation of trifluoromethylated drug analogues. The ultimate CF₃ source is the inexpensive industrial byproduct fluoroform.

An I2-mediated aerobic oxidative annulation of amidines with tertiary aminesviaC–H amination/C–N cleavage for the synthesis of 2,4-disubstituted 1,3,5-triazines

An iodine-mediated aerobic oxidative cycloaddition of amidines with tertiary amines was first demonstrated, affording symmetrical and unsymmetrical 2,4-disubstituted 1,3,5-triazines.

A copper(ii)-catalyzed annulative formylation of o-alkynylanilines with DMF: a single-step strategy for 3-formyl indoles

In this paper, a copper(ii)-catalyzed reaction of o-alkynylanilines with dimethylformamide (DMF) in the presence of oxygen has been developed for synthesizing multisubstituted 3-formyl indole scaffolds.

Design and synthesis of an indol derivative as antibacterial agent against Staphylococcus aureus

Several indole derivatives with antibacterial activity have been prepared using different protocols; however, some require special reagents and conditions. The aim of this study involved the synthesis of some indole derivatives using estrone and OTBS-estrone as chemical tools. The synthesis of the indole derivatives involves reactions such as follows: (1) synthesis of two indol derivatives (4 or 5) by reaction of estrone or OTBS-estrone with phenylhydrazine in medium acid; (2) reaction of 4 or 5 with 6-cloro-1-hexyne in medium basic to form two hexynyl-indol (7 or 8); (3) preparation of indol-propargylic alcohol derivatives (10 or 11) by reaction of benzaldehyde with 7 or 8 in medium basic; (4) synthesis of indol-aldehydes (12 or 13) via oxidation of 10 or 11 with DMSO; (5) synthesis of indeno-indol-carbaldehyde (15 or 16) via alkynylation/cyclization of 12 or 13 with hexyne in presence of copper(II); (6) preparation indeno-indol-carbaldehyde complex (19 or 20) via alkynylation/cyclization of 12 or 13 with 1-(hex-5-yn-1-yl)-2-phenyl-1H-imidazole. The antibacterial effect exerted by the indol-steroid derivatives against Streptococcus pneumoniae and Staphylococcus aureus bacteria was evaluated using dilution method and the minimum inhibitory concentration (MIC). The results showed that only the compound 19 inhibit the growth bacterial of S. aureus. In conclusion, these data indicate that antibacterial activity of 19 can be due mainly to functional groups involved in the chemical structure in comparison with the compounds studied.

Palladium-Catalyzed Formylation of Arylzinc Reagents with S-Phenyl Thioformate

The first example of palladium-catalyzed direct formylation of arylzinc reagents using S-phenyl thioformate is reported. The reaction proceeded under mild conditions, allowing high functional group tolerance. In addition, the developed formylation method was used to prepare deuterated and ¹³C-labeled aryl aldehydes from isotope-labeled S-phenyl thioformates. Moreover, this procedure was applied to an alkenylzinc halide, affording the corresponding enal.

Direct C-2 acylation of indoles with toluene derivatives via Pd(ii)-catalyzed C–H activation

A simple and efficient Pd-catalyzed method for the C2-acylation of indoles is described using toluene derivatives.

Collective Synthesis of 3-Acylindoles, Indole-3-carboxylic Esters, Indole-3-sulfinic Acids, and 3-(Methylsulfonyl)indoles from Free (N-H) Indoles via Common N-Indolyl Triethylborate

A general and direct C3 functionalization of free (N-H) indoles with readily available electrophiles such as acid chlorides, chloroformates, thionyl chloride, and methylsulfonyl chloride via a common N-indolyl triethylborate intermediate is reported. The reaction proceeds smoothly under mild conditions in up to 93% yield. Indoles with substituents at the C2, C4, C5, C6, and C7 positions are well tolerated. The easy accessibility of a variety of important 3-acylindoles, indole-3-carboxylic esters, indole-3-sulfinic acids, and 3-(methylsulfonyl)indoles demonstrates the high degree of compatibility and practicability of this method.

One-pot three-component synthesis of quinazolines via a copper-catalysed oxidative amination reaction

A copper-catalysed three-component reaction for constructing a series of quinazoline derivatives has been developed.