One-Pot Synthesis of N,N-Diphenyl-2-benzothiazolamines from 1-(2-Iodophenyl)-3-phenylthioureas and Iodobenzenes

An efficient copper-catalyzed synthesis of a variety of N,N-diphenyl-2-benzothiazolamines was developed. Starting from substituted 1-(2-iodophenyl)-3-phenylthioureas and substituted iodobenzenes, the reaction proceeded smoothly via a tandem manner in the presence of CuI to afford the corresponding N,N-diphenyl-2-benzothiazolamine derivatives with good functional group tolerance. The protocol features simple performance, easily available starting materials, a one-pot manner, and good functional group tolerance, providing a practical strategy for the preparation of poly-functionalized amines.

Nickel-promoted oxidative domino Csp3-H/N-H bond double-isocyanide insertion reaction to construct pyrrolin-2-ones

The first nickel-catalyzed oxidative domino C_sp3-H/N-H double isocyanide insertion reaction of acetamides with isocyanides has been developed for the synthesis of pyrrolin-2-one derivatives. A wide range of acetamides bearing various functional groups are compatible with this reaction system by utilizing Ni(acac)₂ as a catalyst. In this transformation, isocyanide could serve as a C1 connector and insert into the inactive C_sp3-H bond, representing an effective way to construct heterocycles.

Searching for Small Molecules as Antibacterials: Non-Cytotoxic Diarylureas Analogues of Triclocarban

Triclocarban (TCC), a broad-spectrum lipophilic antimicrobial agent, is a diarylurea derivative that has been used for more than 60 years as a major ingredient of toys, clothing, food packaging materials, food industry floors, medical supplies and especially of personal care products, such as soaps, toothpaste and shampoo. In September 2016, the U.S. FDA banned nineteen antimicrobial ingredients, including TCC, in over-the-counter consumer antiseptic wash products, due to their toxicity. Withdrawal of TCC has prompted efforts to search for new antimicrobial compounds. In this paper, we present the synthesis and biological evaluation, as antibiotic and non-cytotoxic agents, of a series of diarylureas, analogues of TCC. These compounds are characterized by an intriguingly simple chemistry and can be easily synthesized. Among the synthesized compounds, 1ab and 1bc emerge as the most interesting compounds as they show the same activity of TCC (MIC = 16 µg/mL) against Staphylococcus aureus, and a higher activity than TCC against Enterococcus faecalis (MIC = 32 µg/mL versus MIC = 64 µg/mL). Moreover, 1ab and 1bc show no cytotoxicity towards the human mammary epithelial cells MCF-10A and embryonic kidney epithelial cells Hek-293, in opposition to TCC, which exhibits a marked cytotoxicity on the same cell lines and shows a good antitumor activity on a panel of cell lines tested.

Continuous-Flow Synthesis of Thioureas, Enabled by Aqueous Polysulfide Solution

We have developed the continuous-flow synthesis of thioureas in a multicomponent reaction starting from isocyanides, amidines, or amines and sulfur. The aqueous polysulfide solution enabled the application of sulfur under homogeneous and mild conditions. The crystallized products were isolated by simple filtration after the removal of the co-solvent, and the sulfur retained in the mother liquid. Presenting a wide range of thioureas synthesized by this procedure confirms the utility of the convenient continuous-flow application of sulfur.

Chromatography-Free Multicomponent Synthesis of Thioureas Enabled by Aqueous Solution of Elemental Sulfur

The development of a new three-component chromatography-free reaction of isocyanides, amines and elemental sulfur allowed us the straightforward synthesis of thioureas in water. Considering a large pool of organic and inorganic bases, we first optimized the preparation of aqueous polysulfide solution from elemental sulfur. Using polysulfide solution, we were able to omit the otherwise mandatory chromatography, and to isolate the crystalline products directly from the reaction mixture by a simple filtration, retaining the sulfur in the solution phase. A wide range of thioureas synthesized in this way confirmed the reasonable substrate and functional group tolerance of our protocol.

Transition Metal and Inner Transition Metal Catalyzed Amide Derivatives Formation through Isocyanide Chemistry

The synthesis of amides is a substantial research area in organic chemistry because of their ubiquitous presence in natural products and bioactive molecules. The use of easily accessible isocyanides as amidoyl (carbamoyl) synthons in cross-coupling reactions using transition metal and inner transition metöal catalysts is a current trend in this area. Isocyanides, owing to their coordination ability as a ligand and inherent electronic properties for reactions with various partners, have expanded the potential application of these transformations for the preparation of novel synthetic molecules and pharmaceutical candidates. This review gives an overview of the achievements in isocyanide-based transition metal and inner transition metal catalyzed amide formation and discusses highlights of the proposed distinct mechanisms.

1 Introduction

2 Synthesis of Arenecarboxamides

3 Synthesis of Alkanamides

4 Synthesis of Cyclic Amides

5 Formation of Alkynamides

6 Formation of Acrylamide-like Molecules

7 Formation of Ureas and Carbamates

8 Conclusion

Chiral Thioureas-Preparation and Significance in Asymmetric Synthesis and Medicinal Chemistry

For almost 20 years, thioureas have been experiencing a renaissance of interest with the emerged development of asymmetric organocatalysts. Due to their relatively high acidity and strong hydrogen bond donor capability, they differ significantly from ureas and offer, appropriately modified, great potential as organocatalysts, chelators, drug candidates, etc. The review focuses on the family of chiral thioureas, presenting an overview of the current state of knowledge on their synthesis and selected applications in stereoselective synthesis and drug development.

Synthesis of Densely Functionalized Pyrimidouracils by Nickel(II)-Catalyzed Isocyanide Insertion

A robust nickel-catalyzed oxidative isocyanide insertion/C–H amination by reaction of readily available N-uracil-amidines with isocyanides affording polysubstituted pyrimidouracils has been reported. The reaction proceeds in moderate to quantitative yield, under mild conditions (i.e., green solvent, air atmosphere, moderate temperature). The broad range of structurally diverse isocyanides and N-uracil-amidines that are tolerated make this method an interesting alternative to the currently available procedures toward pyrimidouracils.

Dimerization–cyclization reactions of isocyanoaryl-tethered alkylidenecyclobutanes via a triplet biradical mediated process

A triplet biradical mediated dimerization–cyclization reaction of isocyanoaryl-tethered alkylidenecyclobutanes to construct macrocyclic skeletons including dihydroquinoline and quinoline units has been reported.

Catalytic formation of N3-substituted quinazoline-2,4(1H,3H)-diones by Pd(ii)EN@GO composite and its mechanistic investigations through DFT calculations

Modified GO based palladium composite was synthesized for catalytic synthesis of N3-substituted ouinazoline-2,4(1H,3H)-diones and the mechanistic route was theoretically investigated.

Unprecedented thiocarbamidation of nitroarenes: a facile one-pot route to unsymmetrical thioureas

A one-pot synthesis of unsymmetrical thiourea compounds was achieved by the reaction of nitroarenes with in situ generated dithiocarbamate anions.

Pd-Catalyzed multicomponent reaction of sulfonyl azides, primary amines and methyl α-isocyanoacetates: highly efficient synthesis of tetrasubstituted imidazolone derivatives

A highly efficient Pd-catalyzed multicomponent reaction of sulfonyl azides, primary amines and methyl α-isocyanoacetates was developed.

Nickle Catalysis Enables Access to Thiazolidines from Thioureas via Oxidative Double Isocyanide Insertion Reactions

An efficient synthesis of thiazolidine-2,4,5-triimine derivatives was developed via Ni-catalyzed oxidative double isocyanide insertion to thioureas under air conditions, in which thioureas play three roles as a substrate, a ligand, and overcoming isocyanide polymerization. The reaction is featured by employing a low-cost and low loading Ni(acac)₂ catalyst, without any additives, and high atom economy. This is the first example to directly apply a Ni(II) catalyst in oxidative double isocyanide insertion reactions.

Chemoselective isocyanide insertion into the N–H bond using iodine–DMSO: metal-free access to substituted ureas

A chemoselective metal-free method for isocyanide insertion into amines is developed to synthesize symmetrical and unsymmetrical ureas.

Palladium-Catalyzed Incorporation of Two C1 Building Blocks: The Reaction of Atmospheric CO2 and Isocyanides with 2-Iodoanilines Leading to the Synthesis of Quinazoline-2,4(1H,3H)-diones

A Pd-catalyzed insertion and cycloaddition of CO₂ and isocyanide into 2-iodoanilines under atmospheric pressure has been developed and affords quinazoline-2,4(1H,3H)-diones through the formation of new C-C, C-O, and C-N bonds under mild conditions. This reaction provides a new and practical method not only for the construction of quinazoline-2,4(1H,3H)-diones but also for the efficient utilization of carbon dioxide.

I2/CHP mediated [1 + 1 + 1 + 1] cyclization of aromatic isocyanides with amines to construct 1,3-diazetidine-2,4-diimine derivatives

An I₂/CHP (cumene hydroperoxide) mediated [1 + 1 + 1 + 1] cyclization of aromatic isocyanides with readily accessible amines via the formation of 4 new C–N bonds has been developed to construct unsymmetric 1,3-diazetidine-2,4-diimine derivatives under mild conditions.

Scalable, One-Pot, Microwave-Accelerated Tandem Synthesis of Unsymmetrical Urea Derivatives

We report a facile, microwave-accelerated, one-pot tandem synthesis of unsymmetrical ureas via a Curtius rearrangement. In this method, one-pot microwave irradiation of commercially available (hetero)aromatic acids and amines in the presence of diphenylphosphoryl azide enabled extremely rapid (1-5 min) construction of an array of unsymmetrical ureas in good to excellent yields. We demonstrate the utility of our method in the efficient, gram-scale synthesis of key biologically active compounds targeting the cannabinoid 1 and α7 nicotinic acetylcholine receptors.

Iodine-catalyzed formation of substituted 2-aminobenzothiazole derivatives in PEG400

An iodine-catalyzed formation of substituted 2-aminobenzothiazole derivatives is herein described using hydrogen peroxide as an oxidant in PEG₄₀₀.

Synthesis of benzoimidazoquinazolines by cobalt-catalyzed isocyanide insertion–cyclization

The synthesis of benzoimidazoquinazoline amines by the reaction of isocyanides and benzo[d]imidazol-anilines via a cobalt-catalyzed isocyanide insertion reaction into the two N–H active bonds is reported.

Cobalt(ii)/silver relay catalytic isocyanide insertion/cycloaddition cascades: a new access to pyrrolo[2,3-b]indoles

The combination of Co(acac)₂ and AgOTf enables the bimetallic relay catalysis reaction of 2-ethynylanilines and isocyanides, allowing an easy and low-cost access to new densely functionalized pyrrolo[2,3-b]indoles.

NIS/CHP-mediated reaction of isocyanides with hydrazones: access to aminopyrazoles

A NIS/CHP-mediated reaction of isocyanides with hydrazones to construct aminopyrazoles has been developed.

Catalytic Isonitrile Insertions and Condensations Initiated by RNC-X Complexation

Isonitriles are delicately poised chemical entities capable of being coaxed to react as nucleophiles or electrophiles. Directing this tunable reactivity with metal and non-metal catalysts provides rapid access to a large array of complex nitrogenous structures ideally functionalized for medicinal applications. Isonitrile insertion into transition metal complexes has featured in numerous synthetic and mechanistic studies, leading to rapid deployment of isonitriles in numerous catalytic processes, including multicomponent reactions (MCR). Covering the literature from 1990-2014, the present review collates reaction types to highlight reactivity trends and allow catalyst comparison.