Lewis Acid-Catalyzed Generation of CC and CN Bonds on π-Deficient Heterocyclic Substrates

Crystal-Rigidifying Strategy in Hybrid Manganese Halide to Achieve Narrow Green Emission and High Structural Stability

Although organic-inorganic hybrid Mn2+ halides have advanced significantly, achieving high stability and narrow-band emission remains enormously challenging owing to the weak ionic nature and soft crystal lattice of the halide structure. To address these issues, we proposed a cationic engineering strategy of long-range cation π···π stacking and C-H···π interactions to simultaneously improve the crystal structural stability and rigidity. Herein, two organic zero-dimensional (0D) manganese halide hybrids of (BACQ)2MnX4 [BACQ = 4-(butylamino)-7-chloroquinolin-1-ium; X = Cl and Br] were synthesized. (BACQ)2MnX4 display strong green-light emissions with the narrowest full width at half-maximum (fwhm) of 39 nm, which is significantly smaller than those of commercial green phosphor β-SiAlON:Eu2+ and most of reported manganese halides. Detailed Hirshfeld surface analyses demonstrate the rigid environment around the [MnX4]2- units originating from the interactions between [BACQ]+. The rigid crystal structure weakens the electron-phonon coupling and renders narrow fwhm of these manganese halides, which is further confirmed by temperature-dependent emission spectra. Remarkably, (BACQ)2MnX4 realizes outstanding structural and luminescence stabilities in various extreme environments. Benefiting from the excellent performance, these Mn2+ halides are used to assemble light-emitting diodes with a wide color gamut of 105% of the National Television System Committee 1931 standard, showcasing the advanced applications in liquid-crystal-display backlighting.

Study of Direct N7 Regioselective tert-Alkylation of 6-Substituted Purines and Their Modification at Position C6 through O, S, N, and C Substituents

A new N7 direct regioselective method allowing the introduction of tert-alkyl groups into appropriate 6-substituted purine derivatives is developed. This method is based on a reaction of N-trimethylsilylated purines with a tert-alkyl halide using SnCl4 as a catalyst. In this work, we study the structure and optimal reaction conditions leading to the N7 isomer and in some cases also to the N9 isomer. The main goal is devoted to preparing 7-(tert-butyl)-6-chloropurine as a suitable compound for other purine transformations. The stability of the tert-butyl group at the N7 position is tested for classic model reactions, leading to the preparation of new 6,7-disubstituted purine derivatives, which is also interesting from the point of view of possible biological activity.

Promotion of Water as Solvent in Amination of 4-Chloropyrrolopyrimidines and Related Heterocycles under Acidic Conditions

A switch of reaction medium from organic solvents to water can improve the safety and lower the cost of production processes. Hydrochloric acid-promoted amination of fused pyrimidines has been studied using 4-chloro-7H-pyrrolo[2,3-d]pyrimidine and aniline as model compounds. Higher rate was observed in water than in four alcoholic solvents and DMF. An important aspect is that the amount of acid should be kept low to minimize the competing solvolysis. The substrate scope for the amination in water was evaluated by reacting 4-chloro-7H-pyrrolo[2,3-d]pyrimidine with 20 aniline derivatives with variance in steric and electronic properties. Preparative useful reactions were seen for 14 of the 20 derivatives. Unsuited nucleophiles are ortho-substituted anilines with a pKa below 1. Amination of the corresponding quinazoline, thienopyrimidine, and purine also proceeded well in water. Highly lipophilic and crystalline compounds are more efficiently aminated in 2-propanol. Aliphatic and benzylic amines react poorly under acidic conditions, but these aminations can be done in water without acid.

Access to Thienopyridine and Thienoquinoline Derivatives via Site-Selective C-H Bond Functionalization and Annulation

To develop of an effective synthetic methodology for biologically relevant thienopyridines, a concise and efficient protocol is described for the synthesis of a series of substituted thienopyridine and thienoquinoline derivatives with high selectivity using EtOCS₂K as the sulfur source. The reaction proceeds via metal-free, site-selective C-H bond thiolation and cyclization of the alkynylpyridine and alkynylquinoline substrates.

Pulmonary Delivery of Aerosolized Chloroquine and Hydroxychloroquine to Treat COVID-19: In Vitro Experimentation to Human Dosing Predictions

In vitro screening for pharmacological activity of existing drugs showed chloroquine and hydroxychloroquine to be effective against severe acute respiratory syndrome coronavirus 2. Oral administration of these compounds to obtain desired pulmonary exposures resulted in dose-limiting systemic toxicity in humans. However, pulmonary drug delivery enables direct and rapid administration to obtain higher local tissue concentrations in target tissue. In this work, inhalable formulations for thermal aerosolization of chloroquine and hydroxychloroquine were developed, and their physicochemical properties were characterized. Thermal aerosolization of 40 mg/mL chloroquine and 100 mg/mL hydroxychloroquine formulations delivered respirable aerosol particle sizes with 0.15 and 0.33 mg per 55 mL puff, respectively. In vitro toxicity was evaluated by exposing primary human bronchial epithelial cells to aerosol generated from Vitrocell. An in vitro exposure to 7.24 μg of chloroquine or 7.99 μg hydroxychloroquine showed no significant changes in cilia beating, transepithelial electrical resistance, and cell viability. The pharmacokinetics of inhaled aerosols was predicted by developing a physiologically based pharmacokinetic model that included a detailed species-specific respiratory tract physiology and lysosomal trapping. Based on the model predictions, inhaling emitted doses comprising 1.5 mg of chloroquine or 3.3 mg hydroxychloroquine three times a day may yield therapeutically effective concentrations in the lung. Inhalation of higher doses further increased effective concentrations in the lung while maintaining lower systemic concentrations. Given the theoretically favorable risk/benefit ratio, the clinical significance for pulmonary delivery of aerosolized chloroquine and hydroxychloroquine to treat COVID-19 needs to be established in rigorous safety and efficacy studies. Graphical abstract.

Thermodynamic properties of active pharmaceutical ingredients that are of interest in COVID-19

The pure component properties are estimated for active pharmaceutical ingredients that are related or proposed for the treatment of severe acute respiratory syndrome-CoronaVirus-2. These include Baricitinib, Camostat, Chloroquine, Dexamethasone, Hydroxychloroquine, Fingolimod, Favipiravir, Thalidomide, and Umifenovir. The estimations are based on group contribution⁺ (GC) models that contain combined group contribution and atom connectivity index with uncertainties in the estimated property values. The thermodynamic properties that are reported include boiling point, critical temperature, critical pressure, critical volume, melting point, standard Gibb's energy of formation, standard enthalpy of formation, enthalpy of fusion, enthalpy of vaporization at 298 K, enthalpy of vaporization at boiling point, entropy of vaporization at boiling point, flash point, Hildebrand solubility parameter, octanol/water partition coefficient, acentric factor, and liquid molar volume at 298 K. The reported properties are not available in the literature and thereby is an incremental development for reliable process engineering.

TDP-43 Modulation by Tau-Tubulin Kinase 1 Inhibitors: A New Avenue for Future Amyotrophic Lateral Sclerosis Therapy

Amyotrophic lateral sclerosis (ALS) is a fatal neurodegenerative disease without any effective treatment. Protein TDP-43 is a pathological hallmark of ALS in both sporadic and familiar patients. Post-translational modifications of TDP-43 promote its aggregation in the cytoplasm. Tau-Tubulin kinase (TTBK1) phosphorylates TDP-43 in cellular and animal models; thus, TTBK1 inhibitors emerge as a promising therapeutic strategy for ALS. The design, synthesis, biological evaluation, kinase-ligand complex structure determination, and molecular modeling studies confirmed novel pyrrolopyrimidine derivatives as valuable inhibitors for further development. Moreover, compound 29 revealed good brain penetration in vivo and was able to reduce TDP-43 phosphorylation not only in cell cultures but also in the spinal cord of transgenic TDP-43 mice. A shift to M2 anti-inflammatory microglia was also demonstrated in vivo. Both these activities led to motor neuron preservation in mice, proposing pyrrolopyrimidine 29 as a valuable lead compound for future ALS therapy.

Recent Advances in the Transition-Metal-Free Arylation of Hetero­arenes

Transition-metal-free arylation reactions have attracted considerable attention for economic and environmental reasons over the past 40 years. In recent years, much effort has been made to develop efficient transition-metal-free approaches for the arylation of heteroarenes. Covering the literature from 2015 to early 2021, this review aims to provide a thorough overview of the synthetic and mechanistic aspects of these atom-economical and environmentally benign reactions.

1 Introduction

2 Arylation of Pre-functionalized Heteroarenes

2.1 Arylation of Heteroaryl Halides

2.2 Decarboxylative Arylation of Heteroarenes

3 Direct C–H Arylation of Heteroarenes

3.1 C(sp2)–H Arylation

3.2 C(sp3)–H Arylation

4 N-Arylation of Heteroarenes

5 Summary and Outlook

Transition Metal-Free Heteroarylation of Quinoxaline: Construction of Heteroaryl-Fused Phenazines by Oxidative Coupling

A concise method for the construction of heteroaryl-fused phenazines was developed via PIFA-BF₃·Et₂O-mediated oxidative coupling of di-heteroarylated quinoxalines for the first time. Synthesis of mono- and di-heteroarylation of quinoxaline was performed effectively using only LiTMP reagent under transition metal-free conditions and without the use of halogen-containing starting compounds. In addition, nonsymmetrical di-heteroarylated quinoxalines were synthesized through reheteroarylation of mono-heteroarylated quinoxalines in the same way. Oxidation of the saturated compounds formed after heteroarylation was easily accomplished with iodine. The UV-vis absorption and fluorescence features of some compounds were examined.

RhIII-Catalyzed one-pot cascade synthesis of quinazolines with N-alkoxyamide as an amidating reagent

Novel and efficient rhodium(iii)-catalyzed C–H bond activation and tandem annulation for the synthesis of structurally complex quinazolines have been successfully developed.

Copper-catalyzed cross-dehydrogenative coupling between quinazoline-3-oxides and indoles

A novel and simple protocol for the synthesis of 4-(indole-3-yl)quinazolines via cross-dehydrogenative coupling of quinazoline-3-oxides and indoles under an air atmosphere has been developed.

Synthesis and biological study of acridine-based imidazolium salts

A new series of acridine based imidazolium salts was synthesized and evaluated for in vitro cytotoxicity against human cancer cell lines by an MTT assay. The synthesis applied a coupling of imidazoles with 9-chloroacridines, which originated from an Ullmann condensation of a 2-chloro-benzoic acid with an aniline. The target compounds were obtained in high yields. The DPPH assay indicated considerable antioxidant activity for target compounds with simple and short alkyl chains on the imidazole, while increasing chain length and the introduction of an additional π-electron system in most cases reduced the activity. All compounds exhibited low biotoxicity against non-cancerous cell lines, whereas a few compounds showed promising anticancer activity. Unlike for the reference drugs Tamoxifen and Paclitaxel, the anticancer activity of acridine imidazolium ions is specific for only selected cancer types. Reasonable fluorescent behaviour of the products provide potential for visualization of the distribution of active drugs in tissue.

FeCl3 catalysed 7-membered ring formation in a single pot: a new route to indole-fused oxepines/azepines and their cytotoxic activity

FeCl₃ catalysed construction of 7 membered ring, oxepine and azepine derivatives by the reaction of 2,3-dichloro N-heterocycles with 2-(1H-indol-2-yl)phenol/aniline. Several of these compounds were found anti-proliferative properties against cancer cell lines.

Metal-free nitroxyl radical-mediated β-C(sp3)–H amination of saturated ketones with heteroaryl halides: multiple roles of TEMPO

The first metal-free nitroxyl-radical-mediated β-amination of saturated ketones by using heteroaryl halides as amide precursors has been developed.

Use of AlCl3 in Friedel Crafts arylation type reactions and beyond: an overview on the development of unique methodologies leading to N-heteroarenes

An overview on the development of unique methodologies that highlight the use of AlCl₃ in reactions leading to new N-heteroarenes of biological significance is presented.