Synthesis of Os Hydride Complexes Supported by the Diarylamido/Bis(phosphine) PNP Ligand and Attempts at Using (PNP)Ru and (PNP)Os Complexes in C-H Borylation Catalysis

This manuscript describes the synthesis of Os complexes supported by the diarylamido/bis(phosphine) PNP pincer ligand. Compound (PNP)OsH(CO) (3-Os) was prepared by analogy with the previously reported 3-Ru. However, attempts to make (PNP)OsH3 (4-Os) analogously to 4-Ru resulted in the formation of an unexpected compound (5-Os) that is a product of addition of a BH3 unit across the Os-N bond in 4-Os. Nonetheless, 4-Os was prepared via an alternative route. Unlike 4-Ru, 4-Os appears to be a classical trihydride. Compounds 3-Ru, 3-Os, 4-Os, 4-Ru, and 5-Os were tested as potential catalysts for (a) dehydrogenative borylation of terminal alkynes (DHBTA) and (b) dehydrogenative borylation of benzene. No catalytic C-H borylation was observed for any of them, but all of them catalyzed unselective hydroboration of 4-MeC6H4CCH.

Tandem manganese catalysis for the chemo-, regio-, and stereoselective hydroboration of terminal alkynes: in situ precatalyst activation as a key to enhanced chemoselectivity

The manganese(ii) complex [Mn(iPrPNP)Cl2] (iPrPNP = 2,6-bis(diisopropylphosphinomethyl)pyridine) was found to catalyze the stereo- and regioselective hydroboration of terminal alkynes employing HBPin (pinacolborane). In the absence of in situ activators, mixtures of alkynylboronate and E-alkenylboronate esters were formed, whereas when NaHBEt3 was employed as the in situ activator, E-alkenylboronate esters were exclusively accessed. Mechanistic studies revealed a tandem C-H borylation/semihydrogenation pathway accounting for the formation of the products. Stoichiometric reactions hint toward reaction of a Mn-H active species with the terminal alkyne as the catalyst entry pathway to the cycle, whereas reaction with HBPin led to catalyst deactivation.

Dehydroborylation of Terminal Alkynes Using Lithium Aminoborohydrides

Dehydrogenative borylation of terminal alkynes has recently emerged as an atom-economical one-step alternative to traditional alkyne borylation methodologies. Using lithium aminoborohydrides, formed in situ from the corresponding amine-boranes and n-butyllithium, a variety of aromatic and aliphatic terminal alkyne substrates were successfully borylated in high yield. The potential to form mono-, di-, and tri-B-alkynylated products has been shown, though the mono-product is primarily generated using the presented condition. The reaction has been demonstrated at large (up to 50 mmol) scale, and the products are stable to column chromatography as well as acidic and basic aqueous conditions. Alternately, the dehydroborylation can be achieved by treating alkynyllithiums with amine-boranes. In that respect, aldehydes can act as starting materials by conversion to the 1,1-dibromoolefin and in situ rearrangement to the lithium acetylide.

Comparison of Two Zinc Hydride Precatalysts for Selective Dehydrogenative Borylation of Terminal Alkynes: A Detailed Mechanistic Study

The conjugated bis-guanidinate-stabilized zinc hydride complex (I)-precatalyzed chemoselective dehydroborylation of a wide array of terminal alkynes with excellent yields is reported. Further, precatalyst I is compared with a newly synthesized ^DiethylNacNac zinc hydride precatalyst (III) for selective dehydroborylation of terminal alkynes, and it is discovered that precatalyst I is more active than III. We have studied intra- and intermolecular chemoselective dehydroborylation of terminal alkynes over other reducible functionalities such as alkene, ester, isocyanide, nitro, and heterocycles. The highly efficient precatalyst I shows a turnover number of 48.5 and turnover frequency of up to 60.5 h^-1 in the dehydroborylation of 1-ethynyl-4-fluorobenzene (1i). A plausible mechanism for selective dehydrogenative borylation of alkynes has been proposed based on active catalyst isolation and a series of stoichiometric reactions.

Inorganometallics (Transition Metal-Metalloid Complexes) and Catalysis

While the formation and breaking of transition metal (TM)-carbon bonds plays a pivotal role in the catalysis of organic compounds, the reactivity of inorganometallic species, that is, those involving the transition metal (TM)-metalloid (E) bond, is of key importance in most conversions of metalloid derivatives catalyzed by TM complexes. This Review presents the background of inorganometallic catalysis and its development over the last 15 years. The results of mechanistic studies presented in the Review are related to the occurrence of TM-E and TM-H compounds as reactive intermediates in the catalytic transformations of selected metalloids (E = B, Si, Ge, Sn, As, Sb, or Te). The Review illustrates the significance of inorganometallics in catalysis of the following processes: addition of metalloid-hydrogen and metalloid-metalloid bonds to unsaturated compounds; activation and functionalization of C-H bonds and C-X bonds with hydrometalloids and bismetalloids; activation and functionalization of C-H bonds with vinylmetalloids, metalloid halides, and sulfonates; and dehydrocoupling of hydrometalloids. This first Review on inorganometallic catalysis sums up the developments in the catalytic methods for the synthesis of organometalloid compounds and their applications in advanced organic synthesis as a part of tandem reactions.

ZnBr2-Catalyzed Dehydrogenative Borylation of Terminal Alkynes

The simple, commercially available ZnBr₂ has been successfully employed as a highly efficient and chemoselective catalyst for the dehydrogenative borylation of terminal alkynes with HBpin under mild conditions. It shows a good tolerance toward various functional groups such as aryl, alkyl, heteroaryl, etc. The plausible reaction mechanism has been investigated based on the corresponding stoichiometric experiments and DFT calculations.

First-Row d-Block Element-Catalyzed Carbon-Boron Bond Formation and Related Processes

Organoboron reagents represent a unique class of compounds because of their utility in modern synthetic organic chemistry, often affording unprecedented reactivity. The transformation of the carbon-boron bond into a carbon-X (X = C, N, and O) bond in a stereocontrolled fashion has become invaluable in medicinal chemistry, agrochemistry, and natural products chemistry as well as materials science. Over the past decade, first-row d-block transition metals have become increasingly widely used as catalysts for the formation of a carbon-boron bond, a transformation traditionally catalyzed by expensive precious metals. This recent focus on alternative transition metals has enabled growth in fundamental methods in organoboron chemistry. This review surveys the current state-of-the-art in the use of first-row d-block element-based catalysts for the formation of carbon-boron bonds.

Synthesis and reactivity of alkynyl boron compounds

Over the last century, there have been considerable developments in organoboron chemistry due to the stability, non-toxicity, and easy commercial availability of various boronic esters. Several organoboron reagents have emerged and play an increasingly important role in everyday organic synthesis. Among them, alkynyl boron compounds have attracted significant attention due to their easy synthesis and diverse reactivity. In this review, we summarize the advancement of research on alkynyl boron compounds, highlighting their importance in the synthesis of valuable compounds.

Organic synthesis with the most abundant transition metal–iron: from rust to multitasking catalysts

The promising aspects of iron in synthetic chemistry are being explored for three-four decades as a green and eco-friendly alternative to late transition metals. This present review unveils these rich iron-chemistry towards different transformations.

Cross-Dehydrogenative Alkynylation: A Powerful Tool for the Synthesis of Internal Alkynes

Alkynes are among the most fundamentally important organic compounds and are widely used in synthetic chemistry, biochemistry, and materials science. Thus, the development of an efficient and sustainable method for the preparation of alkynes has been a central concern in organic synthesis. Cross-dehydrogenative coupling utilizing E-H and Z-H bonds in two different molecules can avoid the need for prefunctionalization of starting materials and has become one of the most straightforward methods for the construction of E-Z chemical bonds. This Review summarizes recent progress in the preparation of internal alkynes by cross-dehydrogenative coupling with terminal alkynes.

Copper-Catalyzed Triboration of Terminal Alkynes Using B2 pin2 : Efficient Synthesis of 1,1,2-Triborylalkenes

We report herein the catalytic triboration of terminal alkynes with B2 pin2 (bis(pinacolato)diboron) using readily available Cu(OAc)2 and Pn Bu3 . Various 1,1,2-triborylalkenes, a class of compounds that have been demonstrated to be potential matrix metalloproteinase (MMP-2) inhibitors, were obtained directly in moderate to good yields. The process features mild reaction conditions, a broad substrate scope, and good functional group tolerance. This copper-catalyzed reaction can be conducted on a gram scale to produce the corresponding 1,1,2-triborylalkenes in modest yields. The utility of these products was demonstrated by further transformations of the C-B bonds to prepare gem-dihaloborylalkenes (F, Cl, Br), monohaloborylalkenes (Cl, Br), and trans-diaryldiborylalkenes, which serve as important synthons and have previously been challenging to prepare.

N-Heterocyclic Carbene Adducts of Alkynyl Functionalized 1,3,2-Dithioborolanes

Alkynyl functionalized boron compounds are versatile intermediates in the areas of medicinal chemistry, materials science, and optical materials. In particular, alkynyl boronate esters [R¹−C≡C−B(OR²)₂] are of interest since they provide reactivity at both the alkyne entity, with retention of the B−C bond or alkyne transfer to electrophilic substrates with scission of the latter. The boron atom is commonly well stabilized due to (i) the extraordinary strength of two B−O bonds, and (ii) the chelate effect exerted by a bifunctional alcohol. We reasoned that the replacement of a B−O for a B−S bond would lead to higher reactivity and post-functionalization in the resulting alkynyl boronate thioesters [R¹−C≡C−B(S₂X)]. Access to this poorly investigated class of compounds starts form chloro dithioborolane cyclo-Cl−B(S₂C₂H₄) as a representative example. Whereas syntheses of three coordinate alkynyl boronate thioesters [R¹−C≡C−B(S₂X)] proved to be ineffective, the reactions of NHC-adducts (NHC = N-heterocyclic carbene) of cyclo-Cl-B(S₂C₂H₄) afforded the alkyne substituted thioboronate esters in good yield. The products NHC−B(S₂C₂H₄)(C≡C-R¹) are remarkably stable towards water and air, which suggests their use as boron-based building blocks for applications akin to oxygen-based boronate esters.