Iron(III)‐Catalyzed Hydration of Unactivated Internal Alkynes in Weak Acidic Medium, under Lewis Acid‐Assisted Brønsted Acid Catalysis

1-Butyl-3-methylimidazolium tetrafluoroborate as suitable solvent for BF3: the case of alkyne hydration. Chemistry vs electrochemistry

In order to replace the expensive metal/ligand catalysts and classic toxic and volatile solvents, commonly used for the hydration of alkynes, the hydration reaction of alkynes was studied in the ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate (BMIm-BF4) adding boron trifluoride diethyl etherate (BF3·Et2O) as catalyst. Different ionic liquids were used, varying the cation or the anion, in order to identify the best one, in terms of both efficiency and reduced costs. The developed method was efficaciously applied to different alkynes, achieving the desired hydration products with good yields. The results obtained using a conventional approach (i.e., adding BF3·Et2O) were compared with those achieved using BF3 electrogenerated in BMIm-BF4, demonstrating the possibility of obtaining the products of alkyne hydration with analogous or improved yields, using less hazardous precursors to generate the reactive species in situ. In particular, for terminal arylalkynes, the electrochemical route proved to be advantageous, yielding preferentially the hydration products vs the aldol condensation products. Importantly, the ability to recycle the ionic liquid in subsequent reactions was successfully demonstrated.

FeIII -Based Eutectic Mixtures as Multi-task and Reusable Reaction Media for Efficient and Selective Conversion of Alkynes into Carbonyl Compounds

An efficient, simple and general protocol for the selective hydration of terminal alkynes into the corresponding methyl ketones has been developed by using a cheap, easy-to-synthesise and sustainable FeIII -based eutectic mixture [FeCl3  ⋅ 6H2 O/Gly (3 : 1)] as both promoter and solvent for the hydration reaction, working: i) under mild (45 °C) and bench-type reaction conditions (air); and ii) in the absence of ligands, co-catalysts, co-solvents or toxic, non-abundant and expensive noble transition metals (Au, Ru, Pd). When the final methyl ketones are solid/insoluble in the eutectic mixture, the hydration reaction takes place in 30 min, and the obtained methyl ketones can be isolated by simply decanting the liquid FeIII -DES, allowing the direct isolation of the desired ketones without VOC solvents. By using this straightforward and simple isolation protocol, we have been able to recycle the FeIII -based eutectic mixture system up to eight consecutive times. Furthermore, the FeIII -eutectic mixture is able to promote the selective and efficient formal oxidation of internal alkynes into 1,2-diketones, with the possibility of recycling this system up to three consecutive times. Preliminary investigations into a possible mechanism for the oxidation of the internal alkynes seem to indicate that it proceeds through the formation of the corresponding methyl ketones and α-chloroketones.

Hydration Reactions Catalyzed by Transition Metal-NHC (NHC = N-Heterocyclic Carbene) Complexes

The catalytic addition of water to unsaturated C-C or C-N π bonds represent one of the most important and environmentally sustainable methods to form C-O bonds for the production of synthetic intermediates, medicinal agents and natural products. The traditional acid-catalyzed hydration of unsaturated compounds typically requires strong acids or toxic mercury salts, which limits practical applications and presents safety and environmental concerns. Today, transition-metal-catalyzed hydration supported by NHC (NHC = N-heterocyclic carbene) ligands has attracted major attention. By rational design of ligands, choice of metals and counterions as well as mechanistic studies and the development of heterogeneous systems, major progress has been achieved for a broad range of hydration processes. In particular, the combination of NHC ligands with gold shows excellent reactivity compared with other catalytic systems; however, other systems based on silver, ruthenium, osmium, platinum, rhodium and nickel have also been discovered. Ancillary NHC ligands provide stabilization of transition metals and ensure high catalytic activity in hydration owing to their unique electronic and steric properties. NHC-Au(I) complexes are particularly favored for hydration of unsaturated hydrocarbons due to soft and carbophilic properties of gold. In this review, we present a comprehensive overview of hydration reactions catalyzed by transition metal-NHC complexes and their applications in catalytic hydration of different classes of π-substrates with a focus on the role of NHC ligands, types of metals and counterions.

Total Synthesis of Leptosperol B through Stereocontrolled Intramolecular 1,4-Addition to Construct the Octahydronaphthalene Framework

Leptosperol B, possessing a unique octahydronaphthalene framework and 5-substituted aromatic ring, was isolated from the leaves of Leptospermum scoparium in 2020. The asymmetric total synthesis of leptosperol B was accomplished in 12 steps from (-)-menthone. The efficient synthetic scheme involves regioselective hydration and stereocontrolled intramolecular 1,4-addition to construct the octahydronaphthalene skeleton, followed by the introduction of the 5-substituted aromatic ring.

Usefulness of the Global E Factor as a Tool to Compare Different Catalytic Strategies: Four Case Studies

The global E factor (EG factor) has recently been introduced, in the context of asymmetric organocatalysis, as a new green chemistry metric to take into consideration the synthesis of the catalyst in the overall economy of the synthetic process of a given chiral molecule in optically pure form. Herein, its further usefulness in comparing diverse catalytic systems, even different from organocatalysts, is shown by the analysis of four case studies.

Investigation into Lewis and Brønsted acid interactions between metal chloride and aqueous choline chloride-oxalic acid for enhanced furfural production from lignocellulosic biomass

Furfural has been identified as a valuable biobased platform chemical that can be further converted into bioenergy and biochemicals. Furfural is derived from lignocellulosic biomass and can also be regarded as a sustainable alternative to petrochemical products. Herein, the performance of trivalent metal chlorides (FeCl₃, AlCl₃) and tetravalent metal chlorides (SnCl₄, TeCl₄) as Lewis acidic cocatalysts was investigated in an aqueous choline chloride-oxalic acid (16.4 wt% H₂O) deep eutectic solvent (DES) system for producing furfural from oil palm fronds (OPFs). The metal chlorides with greater electrical field gradients were stronger Lewis acids that enhanced both furfural production and degradation reactions. The main degradation product in this reaction system was humin, and this result was confirmed by FTIR analysis. By subjecting OPFs to an aqueous DES reaction (120 °C, 45 min) with SnCl₄ (2.50 wt%), a furfural yield of 59.4% was obtained; without incorporated metal chlorides, the furfural yield was 46.1%. Characterization studies showed synergistic Lewis and Brønsted acid interactions between metal chlorides and DES components. Overall, the residual OPFs showed high glucan content, which led to the production of glucose (71.4%) as a byproduct via enzymatic hydrolysis. Additionally, the aqueous DES system was recycled and reused for several additional runs. The proposed aqueous DES system presents a promising biorefinery approach for the conversion of OPFs to biochemicals.

Green Chemistry Meets Asymmetric Organocatalysis: A Critical Overview on Catalysts Synthesis

Can green chemistry be the right reading key to let organocatalyst design take a step forward towards sustainable catalysis? What if the intriguing chemistry promoted by more engineered organocatalysts was carried on by using renewable and naturally occurring molecular scaffolds, or at least synthetic catalysts more respectful towards the principles of green chemistry? Within the frame of these questions, this Review will tackle the most commonly occurring organic chiral catalysts from the perspective of their synthesis rather than their employment in chemical methodologies or processes. A classification of the catalyst scaffolds based on their E factor will be provided, and the global E factor (EG factor) will be proposed as a new green chemistry metric to consider, also, the synthetic route to the catalyst within a given organocatalytic process.

Synthesis of 2-Aryl Acetophenones via Hydrobromination and Oxy-isomerization of (o-Arylethynyl)benzyl Alcohols

Hydrobromination and oxy-isomerization of (o-arylethynyl)benzyl alcohols to yield brominated aryl ketones were achieved with bromotrimethylsilane. The substrate scope suggested that vinyl carbocations, stabilized by the conjugated aryl groups, are the reaction intermediates. 1H-Isochromene was also detected by ¹H NMR, and an isolated 1H-isochromene was converted to the product when retreated with TMSBr. The formation of 1H-isochromene is equivalent to a 6-endo-dig cyclization and contrasts with the corresponding reactions under basic conditions, in which the 5-exo-dig process dominated.

Water-initiated hydrocarboxylation of terminal alkynes with CO2 and hydrosilane

This work discloses a Cu(ii)-Ni(ii) catalyzed tandem hydrocarboxylation of alkynes with polysilylformate formed from CO2 and polymethylhydrosiloxane that affords α,β-unsaturated carboxylic acids with up to 93% yield. Mechanistic studies indicate that polysilylformate functions as a source of CO and polysilanol. Besides, a catalytic amount of water is found to be critical to the reaction, which hydrolyzes polysilylformate to formic acid that induces the formation of Ni-H active species, thereby initiating the catalytic cycle.