The Contacts of the Monolayer Semiconductor C2 N with 2D Metal Electrodes

2D Metal Enabled Weak Fermi Level Pinning Effect and Tunable Charge Injection in Contacts with Inorganic 2D Perovskites

Tow-dimensional (2D) perovskites have invoked extensive interest because of their good stability and intriguing optoelectronic properties. However, in practical applications, the hampered carrier transportation imposed by the vertical array of large dielectric organic cations and the generally seen Fermi level pinning (FLP) effect in conventional metal-2D semiconductors need to be solved urgently. Sb3+/Bi3+-based inorganic lead-free 2D Cs3(M3+)2X9 perovskites (M = Sb3+, Bi3+; X = Cl-, Br-, I-) are promising candidates to replace the toxic 2D hLHP. The contact properties of Cs3Sb2Cl9 with 2D metals are studied in this work to achieve tunable Schottky barrier heights (SBH). Density functional theory calculations reveal a weak FLP factor of 0.91 in the studied junctions, which is beneficial for improving the carrier injection efficiency through electrode design. Calculations of tunneling properties indicate that a Cd3C2 electrode tends to achieve low SBH and high tunneling probability, while a VS2 (H) electrode tends to realize high SBH and low tunneling probability, suggesting that diverse applications of Cs3Sb2Cl9 can be achieved through electrode engineering.

Simulation of electrical rectification effect in two-dimensional MoSe2/WSe2lateral heterostructures

Two-dimensional (2D) transition metal dichalcogenides lateral heterostructures exhibit excellent performance in electrics and optics. The electron transport of the heterostructures can be effectively regulated by ingenious design. In this study, we construct a monolayer MoSe2/WSe2lateral heterostructure, covalently connecting monolayer MoSe2and monolayer WSe2. Using the Extended Huckel Theory method, we explored current-voltage characteristics under varied conditions, including altering carrier density, atomic replacement and interface angles. Calculations demonstrate a significant electrical rectification ratio (ERR) ranging from 200 to 800. Additionally, Employing Density Functional Theory with non-equilibrium Green's function method, we investigated electronic properties, attributing the rectification effect to electronic state distribution differences, asymmetric transmission coefficients and band bending of projected local density of states. The expandability of the interfacial energy barrier enhances the rectification effect through adjustments in carrier concentration, atomic replacements and interface size. However, these enhancements introduce challenges such as increased electron-boundary scattering and reduced ambipolarity, resulting in a lower ERR. This study provides valuable theoretical insights for optimizing 2D electronic diode devices, offering avenues for precise control of the rectification effect.

Tunable ohmic van der Waals-type contacts in monolayer C3N field-effect transistors

Monolayer (ML) C3N, a novel two-dimensional flat crystalline material with a suitable bandgap and excellent carrier mobility, is a prospective channel material candidate for next-generation field-effect transistors (FETs). The contact properties of ML C3N-metal interfaces based on FETs have been comprehensively investigated with metal electrodes (graphene, Ti2C(OH/F)2, Zr2C(OH/F)2, Au, Ni, Pd, and Pt) by employing ab initio electronic structure calculations and quantum transport simulations. The contact properties of ML C3N are isotropic along the armchair and zigzag directions except for the case of Au. ML C3N establishes vertical van der Waals-type ohmic contacts with all the calculated metals except for Zr2CF2. The ML C3N-graphene, -Zr2CF2, -Ti2CF2, -Pt, -Pd, and -Ni interfaces form p-type lateral ohmic contacts, while the ML C3N-Ti2C(OH)2 and -Zr2C(OH)2 interfaces form n-type lateral ohmic contacts. The ohmic contact polarity can be regulated by changing the functional groups of the 2D MXene electrodes. These results provide theoretical insights into the characteristics of ML C3N-metal interfaces, which are important for choosing suitable electrodes and the design of ML C3N devices.

Design and simulation of nitrogenated holey graphene (C2N) based heterostructure solar cell by SCAPS-1D

The nitrogenated holey Graphene (C2N) based solar cell has been modeled and analyzed by using SCAPS-1D. Initially, a reported structure (TCO/IGZO/C2N) has been considered and improved by incorporating Al and Pt as front and back contact, respectively. Then, a novel device structure (Al/TCO/IGZO/C2N/CZT/Pt) has been proposed by inserting a BSF layer with heavily doped p-CZT material. The outcomes of the suggested cell structure have been analyzed numerically by changing different physical parameters. The absorber and BSF layer's thickness has been optimized as 0.6 μm and 0.4 μm, respectively. The cell performance is significantly declined when the bulk defect density in C2N exceeds the value of 1015 cm-3. The rising of device operating temperature shows a negative effect on performance. From this analysis, the structure has been optimized according to device performance. The optimized results have been achieved with the VOC, JSC, FF and efficiency (eta) of 1.40 V, 22.59 mA/cm2, 89.02%, and 28.16%, respectively. This research contributes to enriching the knowledge on the field of C2N materials and its use in optoelectronic applications.

MXene Contact Engineering for Printed Electronics

MXenes emerging as an amazing class of 2D layered materials, have drawn great attention in the past decade. Recent progress suggest that MXene-based materials have been widely explored as conductive electrodes for printed electronics, including electronic and optoelectronic devices, sensors, and energy storage systems. Here, the critical factors impacting device performance are comprehensively interpreted from the viewpoint of contact engineering, thereby giving a deep understanding of surface microstructures, contact defects, and energy level matching as well as their interaction principles. This review also summarizes the existing challenges of MXene inks and the related printing techniques, aiming at inspiring researchers to develop novel large-area and high-resolution printing integration methods. Moreover, to effectually tune the states of contact interface and meet the urgent demands of printed electronics, the significance of MXene contact engineering in reducing defects, matching energy levels, and regulating performance is highlighted. Finally, the printed electronics constructed by the collaborative combination of the printing process and contact engineering are discussed.

Numerical Investigation of Photo-Generated Carrier Recombination Dynamics on the Device Characteristics for the Perovskite/Carbon Nitride Absorber-Layer Solar Cell

The nitrogenated holey two-dimensional carbon nitride (C2N) has been efficaciously utilized in the fabrication of transistors, sensors, and batteries in recent years, but lacks application in the photovoltaic industry. The C2N possesses favorable optoelectronic properties. To investigate its potential feasibility for solar cells (as either an absorber layer/interface layer), we foremost detailed the numerical modeling of the double-absorber-layer−methyl ammonium lead iodide (CH3NH3PbI3) −carbon nitride (C2N) layer solar cell and subsequently provided in-depth insight into the active-layer-associated recombination losses limiting the efficiency (η) of the solar cell. Under the recombination kinetics phenomena, we explored the influence of radiative recombination, Auger recombination, Shockley Read Hall recombination, the energy distribution of defects, Band Tail recombination (Hoping Model), Gaussian distribution, and metastable defect states, including single-donor (0/+), single-acceptor (−/0), double-donor (0/+/2+), double-acceptor (2/−/0−), and the interface-layer defects on the output characteristics of the solar cell. Setting the defect (or trap) density to 1015cm−3 with a uniform energy distribution of defects for all layers, we achieved an η of 24.16%. A considerable enhancement in power-conversion efficiency ( η~27%) was perceived as we reduced the trap density to 1014cm−3 for the absorber layers. Furthermore, it was observed that, for the absorber layer with double-donor defect states, the active layer should be carefully synthesized to reduce crystal-order defects to keep the total defect density as low as 1017cm−3 to achieve efficient device characteristics.

Achieving an Ohmic contact in graphene-based van der Waals heterostructures by intrinsic defects and the inner polarized electric field of Janus AlGaSSe

The Schottky barrier height is mainly affected by the synergistic action of the inner polarization electric field of Janus AlGaSSe and the 2D/2D heterostructure.

Tunable Schottky and Ohmic contacts in graphene and tellurene van der Waals heterostructures

We systematically investigate the effects of external electric field and interlayer coupling on the electronic structures and contact characteristics of hybrid graphene and tellurene (G/Te) van der Waals heterostructures (vdWHs) based on first-principles calculations. Our results show that the G/α-Te interface is formed by an n-type Schottky contact with a negligible Schottky barrier height (SBH), while the G/β-Te interface is formed by a p-type Schottky contact with a SBH of 0.51 eV. By applying external electric fields perpendicular to the G/Te interfaces or changing the interlayer distance between the graphene and tellurene monolayers, both Schottky barriers and contact types (n-type Schottky, p-type Schottky, and Ohmic) at the G/Te interfaces can be effectively modulated. The changes in charge transfer, as well as the corresponding interface dipole and potential step with the external electric field and interlayer coupling, are revealed to account for the reason for tunable Schottky and Ohmic contacts at the G/Te interfaces. Therefore, the G/Te vdWHs show tunable Schottky and Ohmic contacts with promising applications of graphene-based field-effect transistors in future experiments.