Tuning the Coupling in Single-Molecule Heterostructures: DNA-Programmed and Reconfigurable Carbon Nanotube-Based Nanohybrids

Special Issue "Bio-Nano Interactions 2.0"

In 1961, USA's blues legend Howlin' Wolf released the single entitled "Down in the Bottom" (Figure 1) [...].

DNA-directed assembly of nanomaterials and their biomedical applications

In the past decades, DNA has been widely used in the field of nanostructures due to its unique programmable properties. Besides being used to form its own diverse structures such as the assembly of DNA origami, DNA can also be used for the assembly of nanostructures with other materials. In this review, different strategies for the functionalization of DNA on nanoparticle surfaces are listed, and the roles of DNA in the assembly of nanostructures as well as the influencing factors are discussed. Finally, the biomedical applications of DNA-assembled nanostructures were summarized. This review provided new insight into the application of DNA in nanostructure assembly.

Nanoscale Control of DNA-Linked MoS2-Quantum Dot Heterostructures

The ability to control the assembly of mixed-dimensional heterostructures with nanoscale control is key for the fabrication of novel nanohybrid systems with new functionalities, particularly for optoelectronics applications. Herein we report a strategy to control the assembly of heterostructures and tune their electronic coupling employing DNA as a linker. We functionalized MoS2 nanosheets (NSs) with biotin-terminated dsDNA employing three different chemical strategies, namely, thiol, maleimide, and aryl diazonium. This allowed us to then tether streptavidinated quantum dots (QDs) to the DNA functionalized MoS2 surface via biotin-avidin recognition. Nanoscale control over the separation between QDs and NSs was achieved by varying the number of base pairs (bp) constituting the DNA linker, between 10, 20, and 30 bp, corresponding to separations of 3.4, 6.8, and 13.6 nm, respectively. Spectroscopic data confirmed the successful functionalization, while atomic force and transmission electron microscopy were employed to image the nanohybrids. In solution steady-state and time-resolved photoluminescence demonstrated the electronic coupling between the two nanostructures, that in turn was observed to progressively scale as a function of DNA linker employed and hence distance between the two nanomoieties in the hybrids.

Decoupling Individual Optical Nanosensor Responses Using a Spin-Coated Hydrogel Platform

Significant advances have been made in fields such as nanotechnology and biomedicine using the unique properties of single-walled carbon nanotubes (SWCNTs). Specifically, SWCNTs are used as near-infrared fluorescence sensors in the solution phase to detect a wide array of biologically relevant analytes. However, solution-based sensing has several limitations, including limited sensitivity and poor spatial resolution. We have therefore devised a new spin-coated poly(ethylene glycol) diacrylate (PEG-DA) hydrogel platform to examine individual DNA-functionalized SWCNTs (DNA-SWCNTs) in their native aqueous state and have subsequently used this platform to investigate the temporal modulations of each SWCNT in response to a model analyte. A strong surfactant, sodium deoxycholate (SDC), was chosen as the model analyte as it rapidly exchanges with DNA oligonucleotides on the SWCNT surface, modulating several optical properties of the SWCNTs and demonstrating multiparameter analyte detection. Upon addition of SDC, we observed time-dependent spectral modulations in the emission center wavelengths and peak intensities of the individual SWCNTs, indicative of a DNA-to-surfactant exchange process. Interestingly, we found that the modulations in the peak intensities, as determined by kinetic data, were significantly delayed when compared to their center wavelength counterparts, suggesting a potential decoupling of the response of these two spectral features. We used a 1-D diffusion model to relate the local SDC concentration to the spectral response of each SWCNT and created dose-response curves. The peak intensity shifts at a higher SDC concentration than the center wavelength, indicating a potential change in the conformation of the surfactant molecules adsorbed to the SWCNT sidewall after the initial exchange process. This platform allows for a unique single-molecule analysis technique that is significantly more sensitive and modifiable than utilizing SWCNTs in the solution phase.

Nanoparticle-based single molecule fluorescent probes

Single molecule fluorescent probes have attracted considerable attention duet to their ultimate sensitivity, fast response, low sample consumption, and high signal-to-noise ratio. Nanoparticles with outstanding optical properties make them perfect candidates for probes in application of single molecule detection. In this review, we focus on various kinds of nanoparticles acting as single molecule fluorescent probes, including quantum dots, upconverting fluorescent nanoparticles, carbon dots, single-wall carbon nanotubes, fluorescent nanodiamonds, polymeric nanoparticles, nanoclusters, and metallic nanoparticles. Optical properties of various nanoparticles and their recent application in single molecule fluorescent probes are explored. How nanoparticles boost the sensitivity of detection is emphasized in combination with different sensing strategies. Future trends of nanoparticles in single molecule detection are also discussed. We hope this review can provide practical guidance for researchers who work on nanoparticle-based single molecule fluorescent probes.

A Spin-Coated Hydrogel Platform Enables Accurate Investigation of Immobilized Individual Single-Walled Carbon Nanotubes

Single-walled carbon nanotubes (SWCNTs) have been used in a variety of sensing and imaging applications over the past few years due to their unique optical properties. In the solution phase, SWCNTs are employed as near-infrared (NIR) fluorescence-based sensors of target analytes via modulations in emission intensity and/or wavelength. In an effort to lower the limit of detection, research has been conducted into isolating SWCNTs adhered to surfaces for potential single molecule analyte detection. However, it is known that SWCNT fluorescence is adversely affected by the inherently rough surfaces that are conventionally used for their observation (e.g., glass coverslip), potentially interfering with fluorescence-based analyte detection. Here, using a spin-coating method with thin films of alginate and SWCNTs, we demonstrate that a novel hydrogel platform can be created to investigate immobilized individual SWCNTs without significantly perturbing their optical properties as compared to solution-phase values. In contrast to the glass coverslip, which red-shifted DNA-functionalized (6,5)-SWCNTs by an average of 3.4 nm, the hydrogel platform reported emission wavelengths that statistically matched the solution-phase values. Additionally, the heterogeneity in the wavelength measurements, as determined from the width of created histograms, was reduced nearly by a factor of 3 for the SWCNTs in the hydrogel platform when compared to glass coverslips. Using long SWCNTs, i.e., those with an average length above the diffraction limit of our microscope, we show that a glass coverslip can induce optical heterogeneity along the length of a single SWCNT regardless of its surface functionalization. This is again significantly mitigated when examining the long SWCNTs in the hydrogel platform. Finally, we show that upon the addition of a model analyte (calcium chloride), the optical response can be spatially resolved along the length of a single SWCNT, enabling localized analyte detection on the surface of a single nanoscale sensor.

DNA-Directed Assembly of Carbon Nanotube-Protein Hybrids

Here, we report the controlled assembly of SWCNT–GFP hybrids employing DNA as a linker. Two distinct, enriched SWCNTs chiralities, (6,5), (7,6), and an unsorted SWCNT solution, were selectively functionalized with DNA and hybridized to a complementary GFP^DNA conjugate. Atomic force microscopy images confirmed that GFP attachment occurred predominantly at the terminal ends of the nanotubes, as designed. The electronic coupling of the proteins to the nanotubes was confirmed via in-solution fluorescence spectroscopy, that revealed an increase in the emission intensity of GFP when linked to the CNTs.

Temperature-Sensitive Lipid-Coated Carbon Nanotubes for Synergistic Photothermal Therapy and Gene Therapy

The combination of photothermal therapy (PTT) and gene therapy (GT) shows great potential to achieve synergistic anti-tumor activity. However, the lack of a controlled release of genes from carriers remains a severe hindrance. Herein, peptide lipid (PL) and sucrose laurate (SL) were used to coat single-walled carbon nanotubes (SCNTs) and multi-walled carbon nanotubes (MCNTs) to form bifunctional delivery systems (denoted SCNT-PS and MCNT-PS, respectively) with excellent temperature-sensitivity and photothermal performance. CNT/siRNA suppressed tumor growth by silencing survivin expression while exhibiting photothermal effects under near-infrared (NIR) light. SCNT-PS/siRNA showed very high anti-tumor activity, resulting in the complete inhibition of some tumors. It was highly efficient for systemic delivery to tumor sites and to facilitate siRNA release owing to the phase transition of the temperature-sensitive lipids, due to PL and SL coating. Thus, SCNT-PS/siRNA is a promising anti-tumor nanocarrier for combined PTT and GT.

DNA-driven dynamic assembly of MoS2 nanosheets

Controlling the assembly of molybdenum disulfide (MoS₂) layers into static and dynamic superstructures can impact on their use in optoelectronics, energy, and drug delivery. Toward this goal, we present a strategy to drive the assembly of MoS₂ layers via the hybridization of complementary DNA linkers. By functionalizing the MoS₂ surface with thiolated DNA, MoS₂ nanosheets were assembled into mulitlayered superstructures, and the complementary DNA strands were used as linkers. A disassembly process was triggered by the formation of an intramolecular i-motif structure at a cystosine-rich sequence in the DNA linker at acidic pH values. We tested the versatility of our approach by driving the disassembly of the MoS₂ superstructures through a different DNA-based mechanism, namely strand displacement. This study demonstrates how DNA can be employed to drive the static and dynamic assembly of MoS₂ nanosheets in aqueous solution.

DNA-Driven Nanoparticle Assemblies for Biosensing and Bioimaging

DNA molecules with superior flexibility, affinity and programmability have garnered considerable attention for the controllable assembly of nanoparticles (NPs). By controlling the density, length and sequences of DNA on NPs, the configuration of NP assemblies can be rationally designed. The specific recognition of DNA enables changes to be made to the spatial structures of NP assemblies, resulting in differences in tailorable optical signals. Comprehensive information on the fabrication of DNA-driven NP assemblies would be beneficial for their application in biosensing and bioimaging. This review analyzes the progress of DNA-driven NP assemblies, and discusses the tunable configurations determined by the structural parameters of DNA skeletons. The collective optical properties, such as chirality, fluorescence and surface enhanced Raman resonance (SERS), etc., of DNA-driven NP assemblies are explored, and engineered tailorable optical properties of these spatial structures are achieved. We discuss the development of DNA-directed NP assemblies for the quantification of DNA, toxins, and heavy metal ions, and demonstrate their potential application in the biosensing and bioimaging of tumor markers, RNA, living metal ions and phototherapeutics. We hihghlight possible challenges in the development of DNA-driven NP assemblies, and further direct potential prospects in the practical applications of macroscopical materials and photonic devices.

Studying the excited electronic states of guanine rich DNA quadruplexes by quantum mechanical methods: main achievements and perspectives

Calculations are providing more and more useful insights into the interaction between light and DNA quadruplexes.

Ultrafast Hyperspectral Transient Absorption Spectroscopy: Application to Single Layer Graphene

We describe the basic principles and the experimental implementation of the hyperspectral transient absorption technique, based on femtosecond laser sources. In this technique the samples were optically “pumped” using the femtosecond tunable pulse delivered by an Optical Parametric Amplifier, and “probed” for changes in transmission in a broad spectral range with a “white light” laser-generated supercontinuum. The spectra were collected by a pair of multichannel detectors which allowed retrieval of the absorbance change in a wide spectral range in one time. The use of the supercontinuum probe introduced artifacts in the measured 2D data set which could be corrected with a proper calibration of the chirp. The configuration with crossed polarization for pump and probe pulse extended the spectral measured range above and below the pump energy within the same experiment. We showed the versatility of the technique by applying it to the investigation of the charge carrier dynamics in two-dimensional single layer graphene.

Organizing End-Site-Specific SWCNTs in Specific Loci Using DNA

Single-wall carbon nanotubes (SWCNTs) are known to embody many desirable features for nanoelectronic and photonic applications, including excellent electronic and optical properties and mechanical robustness. To utilize these species in a bottom-up nanotechnological approach, it is necessary to be able to place them in precise absolute positions within a larger framework, without disturbing the conduction surface. Although it is well-known how to orient one or two nanotubes on a DNA origami, precise placement has eluded investigators previously. Here, we report a method of attaching a strand of DNA on the reactive end of a SWCNT, and then of using that DNA strand to place the nanotube at a specific site on a 2D DNA origami raft. We demonstrate that it is possible to place one or two nanotubes on such a DNA origami raft.

Assembly of graphene nanoflake-quantum dot hybrids in aqueous solution and their performance in light-harvesting applications

Graphene nanoflakes and CdSe/ZnS quantum dots were covalently linked in environmentally friendly aqueous solution. Raman spectroscopy and photoluminescence studies, both in solution and on surfaces at the single nanohybrid level, showed evidence of charge transfer between the two nanostructures. The nanohybrids were further incorporated into solar cell devices, demonstrating their potential as light harvesting assemblies.