Heavy Doping by Bromine to Improve the Thermoelectric Properties of n-type Polycrystalline SnSe

Anion/Cation Co-Doping to Improve the Thermoelectric Performance of Sn-Enriched n-Type SnSe Polycrystals with Suppressed Lattice Thermal Conductivity

Enhancing the thermoelectric performance of n-type polycrystalline SnSe is essential, addressing challenges posed by elevated thermal conductivity and compromised power factor inherent in its intrinsic p-type characteristics. This investigation utilized solid-state reactions and spark plasma sintering techniques for the synthesis of n-type SnSe. A significant improvement in the figure of merit (ZT) is achieved through strategic reduction in Se concentration and optimization of crystal orientation. The co-doping with Br and Ge further improves the material; Br amplifies carrier concentration, enhancing electrical conductivity, while Ge introduces effective phonon scattering centers. In the Br/Ge co-doped SnSe sample, thermal conductivity dropped to 0.38 Wm⁻¹K⁻¹, yielding a remarkable power factor of 662 µW mK- 2 at 773 K, culminating in a ZT of 1.34. This signifies a noteworthy 605% improvement over the pristine sample, underscoring the pivotal role of Ge doping in enhancing n-type material thermoelectric properties. The enhancement is attributed to Br doping introducing additional electronic states near the valence band, and Ge doping modifying the band structure, fostering resonant states near the conduction band. The Br/Ge co-doping further transforms the band structure, influencing electrical conductivity, Seebeck coefficient, and thermal conductivity, advancing the understanding and application of n-type SnSe materials for superior thermoelectric performance.

Divacancy and resonance level enables high thermoelectric performance in n-type SnSe polycrystals

N-type polycrystalline SnSe is considered as a highly promising candidates for thermoelectric applications due to facile processing, machinability, and scalability. However, existing efforts do not enable a peak ZT value exceeding 2.0 in n-type polycrystalline SnSe. Here, we realized a significant ZT enhancement by leveraging the synergistic effects of divacancy defect and introducing resonance level into the conduction band. The resonance level and increased density of states resulting from tungsten boost the Seebeck coefficient. The combination of the enhanced electrical conductivity (achieved by increasing carrier concentration through WCl6 doping and Se vacancies) and large Seebeck coefficient lead to a high power factor. Microstructural analyses reveal that the co-existence of divacancy defects (Se vacancies and Sn vacancies) and endotaxial W- and Cl-rich nanoprecipitates scatter phonons effectively, resulting in ultralow lattice conductivity. Ultimately, a record-high peak ZT of 2.2 at 773 K is achieved in n-type SnSe0.92 + 0.03WCl6.

Structural Characterization and Thermoelectric Properties of Br-Doped AgSnm[Sb0.8Bi0.2]Te2+m Systems

Herein, we report the synthesis, structural and microstructural characterization, and thermoelectric properties of AgSnm[Sb0.8Bi0.2]Te2+m and Br-doped telluride systems. These compounds were prepared by solid-state reaction at high temperature. Powder X-ray diffraction data reveal that these samples exhibit crystal structures related to the NaCl-type lattice. The microstructures and morphologies are investigated by scanning electron microscopy, energy-dispersive X-ray spectroscopy (EDS), and high-resolution transmission electron microscopy (HRTEM). Positive values of the Seebeck coefficient (S) indicate that the transport properties are dominated by holes. The S of undoped AgSnm[Sb0.8Bi0.2]Te2+m ranges from +40 to 57 μV·K-1. Br-doped samples with m = 2 show S values of +74 μV·K-1 at RT, and the Seebeck coefficient increases almost linearly with increasing temperature. The total thermal conductivity (κtot) monotonically increases with increasing temperature (10-300 K). The κtot values of undoped AgSnm[Sb0.8Bi0.2]Te2+m are ~1.8 W m-1 K-1 (m = 4) and ~1.0 W m-1 K-1 (m = 2) at 300 K. The electrical conductivity (σ) decreases almost linearly with increasing temperature, indicating metal-like behavior. The ZT value increases as a function of temperature. A maximum ZT value of ~0.07 is achieved at room temperature for the Br-doped phase with m = 4.

Insight into the intrinsic microstructures of polycrystalline SnSe based compounds

SnSe based compounds have attracted much attention due to the ultra-low lattice thermal conductivity and excellent thermoelectric properties. The origin of the low thermal conductivity has been ascribed to the strong phonon anharmonicity. Generally, the microstructures are also effective in scattering the phonons and further reducing the lattice thermal conductivity. In this work, the microstructures of undoped SnSe and Bi-doped Sn_0.97SeBi_0.03have been investigated by transmission electron microscopy. A characteristic microstructure of lath-like grains has been observed in SnSe based compounds from perpendicular to the pressure direction. In addition, there exist a large quantity of low-angle grain boundaries and a high concentration of edge dislocations and stacking faults in the grains. All these microstructures result in lattice mismatch and distortion and can act as the phonon scattering centers, which broaden the understanding of the low thermal conductivity of SnSe based compounds.

An Overview of the Strategies for Tin Selenide Advancement in Thermoelectric Application

Chalcogenide, tin selenide-based thermoelectric (TE) materials are Earth-abundant, non-toxic, and are proven to be highly stable intrinsically with ultralow thermal conductivity. This work presented an updated review regarding the extraordinary performance of tin selenide in TE applications, focusing on the crystal structures and their commonly used fabrication methods. Besides, various optimization strategies were recorded to improve the performance of tin selenide as a mid-temperature TE material. The analyses and reviews over the methodologies showed a noticeable improvement in the electrical conductivity and Seebeck coefficient, with a noticeable decrement in the thermal conductivity, thereby enhancing the tin selenide figure of merit value. The applications of SnSe in the TE fields such as microgenerators, and flexible and wearable devices are also discussed. In the future, research in low-dimensional TE materials focusing on nanostructures and nanocomposites can be conducted with the advancements in material science technology as well as microtechnology and nanotechnology.

Effect of iodine doping on the electrical, thermal and mechanical properties of SnSe for thermoelectric applications

We report the evolution of the thermoelectric and mechanical properties of n-type SnSe obtained by iodine doping at the Se site. The thermoelectric performance of n-type SnSe is detailed in the temperature range starting from 150 K ≤ T ≤ 700 K. The power factor of 0.25% iodine doped SnSe is found to be 0.33 mW m-1 K-2 at 700 K, comparable to that of the other monovalent doped n-type SnSe. The temperature-dependent electrical conductivity of the undoped and iodine doped SnSe samples is corroborated by using the adiabatic small polaron hopping model. A very low value of thermal conductivity, 0.62 W m-1 K-1, is obtained at 300 K and is comparable to that of SnSe single crystals. The low thermal conductivity of n-type polycrystalline SnSe is understood by taking into account the anharmonic phonon vibrations induced by the incorporation of heavy iodine atoms at the Se sites as well as the structural hierarchy of the compound. Besides, iodine doping is found to improve the reduced Young's modulus and hardness values of SnSe, which is highly desirable for thermoelectric device applications.

High-Performance Thermoelectric SnSe: Aqueous Synthesis, Innovations, and Challenges

Tin selenide (SnSe) is one of the most promising candidates to realize environmentally friendly, cost-effective, and high-performance thermoelectrics, derived from its outstanding electrical transport properties by appropriate bandgaps and intrinsic low lattice thermal conductivity from its anharmonic layered structure. Advanced aqueous synthesis possesses various unique advantages including convenient morphology control, exceptional high doping solubility, and distinctive vacancy engineering. Considering that there is an urgent demand for a comprehensive survey on the aqueous synthesis technique applied to thermoelectric SnSe, herein, a thorough overview of aqueous synthesis, characterization, and thermoelectric performance in SnSe is provided. New insights into the aqueous synthesis-based strategies for improving the performance are provided, including vacancy synergy, crystallization design, solubility breakthrough, and local lattice imperfection engineering, and an attempt to build the inherent links between the aqueous synthesis-induced structural characteristics and the excellent thermoelectric performance is presented. Furthermore, the significant advantages and potentials of an aqueous synthesis route for fabricating SnSe-based 2D thermoelectric generators, including nanorods, nanobelts, and nanosheets, are also discussed. Finally, the controversy, strategy, and outlook toward future enhancement of SnSe-based thermoelectric materials are also provided. This Review guides the design of thermoelectric SnSe with high performance and provides new perspectives as a reference for other thermoelectric systems.

Highly Textured N-Type SnSe Polycrystals with Enhanced Thermoelectric Performance

Thermoelectric materials, which directly convert heat into electricity based on the Seebeck effects, have long been investigated for use in semiconductor refrigeration or waste heat recovery. Among them, SnSe has attracted significant attention due to its promising performance in both p-type and n-type crystals; in particular, a higher out-of-plane ZT value could be achieved in n-type SnSe due to its 3D charge and 2D phonon transports. In this work, the thermoelectric transport properties of n-type polycrystalline SnSe were investigated with an emphasis on the out-of-plane transport through producing textural microstructure. The textures were fabricated using mechanical alloying and repeated spark plasma sintering (SPS), as a kind of hot pressing, aimed at producing strong anisotropic transports in n-type polycrystalline SnSe as that in crystalline SnSe. Results show that the lowest thermal conductivity of 0.36 Wm⁻¹ K⁻¹ was obtained at 783 K in perpendicular to texture direction. Interestingly, the electrical transport properties are less anisotropic and even nearly isotropic, and the power factors reach 681.3 μWm⁻¹ K⁻² at 783 K along both parallel and perpendicular directions. The combination of large isotropic power factor and low anisotropic thermal conductivity leads to a maximum ZT of 1.5 at 783 K. The high performance elucidates the outstanding electrical and thermal transport behaviors in n-type polycrystalline SnSe, and a higher thermoelectric performance can be expected with future optimizing texture in n-type polycrystalline SnSe.

n-Type TaCoSn-Based Half-Heuslers as Promising Thermoelectric Materials

Half-Heusler compounds are recognized as promising thermoelectric materials for high-temperature power generation, but their relatively high lattice thermal conductivity impedes further improvement of ZT. Here, we report the synthesis of a new half-Heusler compound TaCoSn with a low thermal conductivity. Experimentally, the pristine TaCoSn exhibits a low lattice thermal conductivity of ∼5.7 W m^-1 K^-1 at 300 K, which is lower than that of most of the other half-Heusler compounds. Phonon calculations by density functional theory indicate that the low phonon velocity, small Debye temperature, and large Grüneisen parameter are the contributors to the low thermal conductivity of TaCoSn. Importantly, intense point-defect scattering can be induced by alloying Nb at the Ta site, which further suppresses the thermal conductivity of TaCoSn. Additionally, Sb has been identified as an efficient dopant for supplying high electron concentration. Finally, the optimized n-type Ta_0.6Nb_0.4CoSn_0.94Sb_0.06 demonstrates a peak ZT above 0.7 at 973 K. Our work demonstrates that the TaCoSn-based half-Heuslers are promising thermoelectric materials.

High Thermoelectric Performance in n-Type Polycrystalline SnSe via Dual Incorporation of Cl and PbSe and Dense Nanostructures

Despite extensive studies on emerging thermoelectric material SnSe, its n-type form is largely underdeveloped mainly due to the difficulty in stabilizing the carrier concentration at the optimal level. Here, we dually introduce Cl and PbSe to induce n-type conduction in intrinsic p-type SnSe. PbSe alloying enhances the power factor and suppresses lattice thermal conductivity at the same time, giving a highest thermoelectric figure of merit ZT of 1.2 at 823 K for n-type polycrystalline SnSe materials. The best composition is Sn_0.90Pb_0.15Se_0.95Cl_0.05. Samples prepared by the solid-state reaction show a high maximum ZT ( ZT_max) ∼1.1 and ∼0.8 parallel and perpendicular to the press direction of spark plasma sintering, respectively. Remarkably, post-ball milling and annealing processes considerably reduce structural anisotropy, thereby leading to a ZT_max ∼1.2 along both the directions. Hence, the direction giving a ZT_max is controllable for this system using the specialized preparation methods for specimens. Spherical aberration-corrected scanning transmission electron microscopic analyses reveal the presence of heavily dense edge dislocations and strain fields, not observed in the p-type counterparts, which contribute to decreasing lattice thermal conductivity. Our theoretical calculations employing a Callaway-Debye model support the experimental results for thermal transport and microscopic structures.

Zintl-phase Eu2ZnSb2: A promising thermoelectric material with ultralow thermal conductivity

Zintl compounds are considered to be potential thermoelectric materials due to their "phonon glass electron crystal" (PGEC) structure. A promising Zintl-phase thermoelectric material, 2-1-2-type Eu₂ZnSb₂ (P6₃/mmc), was prepared and investigated. The extremely low lattice thermal conductivity is attributed to the external Eu atomic layers inserted in the [Zn₂Sb₂]^2- network in the structure of 1-2-2-type EuZn₂Sb₂ [Formula: see text], as well as the abundant inversion domain boundary. By regulating the Zn deficiency, the electrical properties are significantly enhanced, and the maximum ZT value reaches ∼1.0 at 823 K for Eu₂Zn_0.98Sb₂ Our discovery provides a class of Zintl thermoelectric materials applicable in the medium-temperature range.