Ultrafast Recovery of Uranium from Seawater by Bacillus velezensis Strain UUS-1 with Innate Anti-Biofouling Activity

Realizing Direct Uranium Extraction from Seawater Using a Carboxyl-g-C3N4/CdS Hydrogel

The photocatalytic U(VI) reduction is regarded as an effective strategy for recovering uranium. However, its application in seawater uranium extraction poses challenges due to limited reactivity in the presence of carbonate and under atmospheric conditions. In the present study, a photoactive hydrogel made of carboxyl-functionalized g-C3N4/CdS (CCN/CdS) is designed for extracting uranium. The carboxyl groups on g-C3N4 enhance the affinity toward uranyl ions while CdS facilitates the activation of dissolved oxygen. Under atmospheric conditions, the prepared hydrogel catalyst achieves over 80% reduction rate of 0.1 mM U(VI) within 150 min in the presence of carbonate, without the assistance of any electron donors. During the photocatalytic process, U(VI) is reduced to form UO2+x. The hydrogel catalyst exhibits a high uranium extraction capacity of >434.5 mg g⁻1 and the products can be effectively eluted using a 0.1 M NaCO3 solution. Furthermore, this hydrogel catalyst offers excellent stability, good recyclability, outstanding antifouling activity, and ease of separation, all of which are desirable for seawater uranium extraction. Finally, the test in real seawater demonstrates the successful extraction of uranium from seawater using the prepared hydrogel catalyst.

Emerging Nanomaterials toward Uranium Extraction from Seawater: Recent Advances and Perspectives

Nuclear energy holds great potential to facilitate the global energy transition and alleviate the increasing environmental issues due to its high energy density, stable energy output, and carbon-free emission merits. Despite being limited by the insufficient terrestrial uranium reserves, uranium extraction from seawater (UES) can offset the gap. However, the low uranium concentration, the complicated uranium speciation, the competitive metal ions, and the inevitable marine interference remarkably affect the kinetics, capacity, selectivity, and sustainability of UES materials. To date, massive efforts have been made with varying degrees of success to pursue a desirable UES performance on various nanomaterials. Nevertheless, comprehensive and systematic coverage and discussion on the emerging UES materials presenting the fast-growing progress of this field is still lacking. This review thus challenges this position and emphatically focuses on this topic covering the current mainstream UES technologies with the emerging UES materials. Specifically, this review elucidates the causality between the physiochemical properties of UES materials induced by the intellectual design strategies and the UES performances and further dissects the relationships of materials-properties-activities and the corresponding mechanisms in depth. This review is envisaged to inspire innovative ideas and bring technical solutions for developing technically and economically viable UES materials.

Interlayer manipulation of bio-inspired Ti3C2Tx nanocontainer through intercalation of amino acid molecules to dramatically boosting uranyl hijacking capability from seawater

More than 4.5 billion tons of unconventional uranium resources [UO2(CO3)3]4- are uniformly dissolved in seawater, providing a sustainable and abundant fuel source for the development of nuclear energy. Herein, we presented a rational design and development of Ti3C2Tx nanocontainer inspired by the exceptional selectivity and affinity exhibited by superb-uranyl proteins through amino acid intercalation. The amino acid intercalation of Ti3C2Tx demonstrated exceptional UO22+ capture capacity (Arg-Ti3C2Tx, His-Ti3C2Tx, and Lys-Ti3C2Tx with qmax values of 594.46, 846.04, and 1030.17 mg/g). Furthermore, these intercalated materials exhibited remarkable sequestration efficiency and selectivity (Uinitial = ∼45.2 ∼7636 μg/L; ∼84.45% ∼98.08%; and ∼2.72 ×104 ∼1.28 ×105 KdU value), despite the presence of an overwhelming surplus of Na+, Ca2+, Mg2+, and Co2+ ions. Significantly, even in the 0.3 M NaHCO3 solution and surpassing 103-fold of the Na3VO4 system, the adsorption efficiency of Lys-Ti3C2Tx still achieved a remarkable 63.73% and 65.05%. Moreover, the Lys-Ti3C2Tx can extract ∼30.23 ∼8664.03 μg/g uranium after 24 h contact in ∼13.3 ∼5000 μg/L concentration from uranium-spiked natural seawater. The mechanism analysis revealed that the high binding capability can be attributed to the chelation of carboxyl and amino groups with uranyl ions. This innovative state-of-the-art approach in regulating uranium harvesting capability through intercalation of amino acid molecules provides novel insights for extracting uranium from seawater.

Yeast-Raised Polyamidoxime Hydrogel Prepared by Ice Crystal Dispersion for Efficient Uranium Extraction from Seawater

Uranium extraction from seawater has attracted worldwide attention due to the massive reserves of uranium. Due to the straightforward synthesis and strong affinity toward uranyl ions (UO2 2+), the amidoxime group shows promise for use in highly efficient uranium capture.  However, the low mass transfer efficiency within traditional amidoxime-based adsorbents severely limits the adsorption rate and the utilization of adsorption sites. In this work, a macroporous polyamidoxime (PAO) hydrogel is prepared by yeast-based biological foaming combined with ice crystal dispersion that effectively maintained the yeast activity. The yeast-raised PAO (Y-PAO) adsorbent has numerous bubble-like holes with an average pore diameter >100 µm. These macropores connected with the intrinsic micropores of PAO to construct efficient diffusion channels for UO2 2+ provided fast mass transporting channels, leading to the sufficient exposure of hidden binding sites. The maximum adsorption capacity of Y-PAO membrane reached 10.07 mg-U/g-ads, ≈1.54 times higher than that of the control sample. It took only eight days for Y-PAO to reach the saturation adsorption capacity of the control PAO (6.47 mg-U/g-ads, 28 days). Meanwhile, Y-PAO possessed excellent ion selectivity, good reusability, and low cost. Overall, the Y-PAO membrane is a highly promising adsorbent for use in industrial-scale uranium extraction from seawater.

Isolation and identification of a high-efficiency hexavalent uranium adsorption strain and preliminary study of the influencing factors and adsorption mechanism

In this study, a bacterial strain Chryseobacterium bernardetii WK-3 was isolated from the rhizosphere soil of a uranium tailings in Southern China. It can efficiently adsorb hexavalent uranium with an adsorption ratio of 92.3%. The influence of different environmental conditions on the adsorption ratio of Chryseobacterium bernardetii strain WK-3 was investigated, and the adsorption mechanism was preliminarily discussed by scanning electron microscopy-energy dispersive X-ray spectroscopy (SEM-EDS). The results showed that the optimal adsorption conditions for U(VI) by Chryseobacterium bernardetii strain WK-3 were pH = 5, temperature 30 ℃, NaCl concentration 1%, and inoculation volume 10%. When the initial concentration of U was 50 ~ 150 mg/L, the adsorption capacity of Chryseobacterium bernardetii strain WK-3 to U(VI) reached the maximum and maintained the equilibrium at 44 h. SEM-EDS results showed that phosphorus in cells participates in the interaction of uranyl ions, which may indicate that phosphate was produced during cell metabolism and was further combined to form U(VI)-phosphate minerals. In summary, Chryseobacterium bernardetii strain WK-3 would be a promising alternative for environmental uranium contamination remediation.

Utilization of nickel-graphite electrode as an electron donor for high-efficient microbial removal of solved U(VI) mediated by Leifsonia sp

Enzymatically catalyzed reduction of metals by bacteria has potential application value to uranium-mine wastewater. However, its practical implementation has long been restricted by its intrinsic drawbacks such as low efficiency and long treatment-time. This study aims to explore the effect of electrodes on U (VI) removal efficiency by a purified indigenous bacteria isolated from a uranium mining waste pile in China. The effects of current intensity, pH, initial U (Ⅵ) concentration, initial dosage of bacteria and contact time on U (Ⅵ) removal efficiency were investigated via static experiments. The results show that U(VI) removal rate was stabilized above 90% and the contact time sharply shortened within 1 h when utilized nickel-graphite electrode as an electron donor. Over the treatment ranges investigated maximum removal of U (Ⅵ) was 96.04% when the direct current was 10 mA, pH was 5, initial U (Ⅵ) concentration was 10 mg/L, and dosage of Leifsonia sp. was 0.25 g/L. In addition, it is demonstrated that U (VI) adsorption by Leifsonia sp. is mainly chemisorption and/or reduction as the quasi-secondary kinetics is more suitable for fitting the process. FTIR results indicated that amino, amide, aldehyde and phosphate -containing groups played a role in the immobilization of U (VI) more or less. SEM and EDS measurements revealed that U appeared to be more obviously aggregated on the surface of cells. A plausible explanation for this, supported by XPS, is that U (VI) was partially reduced to U (IV) by direct current then precipitated on the cells surface. These observations reveal that Nickel-graphite electrode exhibited good electro-chemical properties and synergistic capacity with Leifsonia sp. which potentially provides a new avenue for uranium enhanced removal/immobilization by indigenous bacteria.

Enhancing Commercially Iron Powder Electron Transport by Surface Biosulfuration to Achieve Uranium Extraction from Uranium Ore Wastewater

The zero-valent iron (ZVI) has attracted increasing attention due to the enhanced reactivity of ZVI to uranium wastewater. However, ZVI practical application is hampered due to its susceptibility to oxidation and the formation of passivation layers during storage and in situ restoration. To address these issues, we used a biosulfuration approach to modify ZVI for application in uranium ore wastewater treatment. A series of physicochemical characterization tools and photoelectronic analyses showed that BS-ZVI considerably increased carrier separation efficiency and visible light absorption capacity, resulting in a significant photoassisted enhancement effect on uranium extraction. Accordingly, the uranium removal efficiency of BS-ZVI reached 91% within 60 min, and its maximum adsorption capacity was 336.3 mg/g. By analyzing the mechanism, the improved U(VI) removal performance was mostly responsible on the dissolution of the passivation layer on the surface of ZVI, the generation of Fe(II) and FeS, and the important role of Shewanella putrefaciens extracellular polymers (EPS). Overall, the BS-ZVI biohybrid merges with the high activity of ZVI, bio-FeS, and self-regeneration ability of bacteria, expanding a promising new approach for sustainable treatment of uranium mine wastewater.

Bioremediation of uranium (Ⅵ) using a native strain Halomonas campaniensis ZFSY-04 isolated from uranium mining and milling effluent: Potential and mechanism

A significant surge in the exploitation of uranium resources has resulted in considerable amounts of radioactive effluents. Thus, efficient and eco-friendly uranium removal strategies need to be explored to ensure ecological safety and resource recovery. In this study, we investigated the resistance of Halomonas campaniensis strain ZFSY-04, isolated from an evaporation pool at a uranium mine site, and its potential mechanism of uranium (Ⅵ) removal. The results showed that the strain exhibited unique uranium tolerance and its growth was not significantly inhibited under a uranium concentration of 700 mg/L. It had a maximum loading capacity of 865.40 mg/g (dry weight), achieved following incubation under uranium concentration of 100 mg/L, pH 6.0, and temperature 30 °C, for 2 h, indicating that the removal of uranium by the strain was efficient and rapid. Combined with kinetic, isothermal, thermodynamic, and microspectral analyses, the mechanism of uranium loading by strain ZFSY-04 was metabolism-dependent and diverse, including, physical and chemical adsorption on the cell surface, extracellular biomineralisation, intracellular bioaccumulation, and biomineralisation. Our results highlight the unique properties of indigenous strains, including high resistance, high efficiency, rapid uranium removal, and various uranium removal strategies, which make it suitable as a new tool for in situ bioremediation and uranium-contaminated environmental resource recovery.

Efficacy and mechanisms of δ-MnO2 modified biochar with enhanced porous structure for uranium(VI) separation from wastewater

Even though uranium (U) is considered to be an essential strategic resource with vital significance to nuclear power development and climate change mitigation, U exposure to human and ecological environment has received growing concerns due to its both highly chemically toxic and radioactively hazardous property. In this study, a composite (M-BC) based on Ficus macrocarpa (banyan tree) aerial roots biochar (BC) modified by δ-MnO2 was designed to separate U(VI) from synthetic wastewater. The results showed that the separation capacity of M-BC was 61.53 mg/g under the solid - liquid ratio of 1 g/L, which was significantly higher than that of BC (12.39 mg/g). The separation behavior of U(VI) both by BC and M-BC fitted well with Freundlich isothermal models, indicating multilayer adsorption occurring on heterogeneous surfaces. The reaction process was consistent with the pseudo-second-order kinetic model and the main rate-limiting step was particle diffusion process. It is worthy to note that the removal of U(VI) by M-BC was maintained at 94.56% even after five cycles, indicating excellent reusability and promising application potential. Multiple characterization techniques (e.g. Scanning Electron Microscope-Energy Dispersive Spectrometer (SEM-EDS), Fourier Transform Infrared Spectroscopy (FTIR), X-ray Diffraction (XRD), Brunauer-Emmett-Teller (BET) and X-ray Photoelectron Spectroscopy (XPS)) uncovered that U(VI) complexation with oxygen-containing functional groups (e.g. O-CO and Mn-O) and cation exchange with protonated ≡MnOH were the dominant mechanisms for U(VI) removal. Application in real uranium wastewater treatment showed that 96% removal of U was achieved by M-BC and more than 92% of co-existing (potentially) toxic metals such as Tl, Co, Pb, Cu and Zn were simultaneously removed. The work verified a feasible candidate of banyan tree aerial roots biowaste based δ-MnO2-modified porous BC composites for efficient separation of U(VI) from uranium wastewater, which are beneficial to help address the dilemma between sustainability of nuclear power and subsequent hazard elimination.

Recent developments and challenges in uranium extraction from seawater through amidoxime-functionalized adsorbents

As per statistical estimations, we have only around 100 years of uranium life in terrestrial ores. In contrast, seawater has viable uranium resources that can secure the future of energy. However, to achieve this, environmental challenges need to be overcome, such as low uranium concentration (3.3 ppb), fouling of adsorbents, uranium speciation, oceanic temperature, and competition between elements for the active site of adsorbent (such as vanadium which has a significant influence on uranium adsorption). Furthermore, the deployability of adsorbent under seawater conditions is a gigantic challenge; hence, leaching-resistant stable adsorbents with good reusability and high elution rates are extremely needed. Powdered (nanostructured) adsorbents available today have limitations in fulfilling these requirements. An increase in the grafting density of functional ligands keeping in view economic sustainability is also a major obstacle but a necessity for high uranium uptake. To cope with these challenges, researchers reported hundreds of adsorbents of different kinds, but amidoxime-based polymeric adsorbents have shown some remarkable advantages and are considered the benchmark in uranium extraction history; they have a high affinity for uranium because of electron donors in their structure, and their amphoteric nature is responsible for effective uranium chelation under a wide range of pH. In this review, we have mainly focused on recent developments in uranium extraction from seawater through amidoxime-based adsorbents, their comparative analysis, and problematic factors that are needed to be considered for future research.

High-efficiency uranium extraction from seawater by low-cost natural protein hydrogel

Utilization of uranium resource in seawater are highly possible to meet the growth demands for the sustainable development of nuclear energy industry. Bio-adsorbents exhibit high performance in terms of adsorption selectivity, equilibrium speed, and environmental friendliness, while the high fabrication cost hinders their practical application. In this study, a low-cost soy protein isolate (SPI) is used to fabricate adsorbent named SPI hydrogel for uranium extraction. This is the first report on applying bio-adsorbents derived from low-cost natural proteins for uranium extraction. The SPI hydrogel showed high uranium adsorption capacity of 53.94 mg g^-1 in simulated nuclear wastewater and 5.29 mg g^-1 is achieved in natural seawater, which is higher than all currently available adsorbents based on non-modified natural biomolecules. The amino and oxygen-containing groups are identified as the functional groups for uranyl binding by providing four oxygen and two nitrogen atoms to form equatorial coordination with uranyl, which guarantees the high binding selectivity and affinity to uranyl ions. The low cost for accessing the raw material together with the environmental friendliness, high salt tolerance, high uranium adsorption ability, and high selectivity to uranium, make SPI hydrogel a promising adsorbent for uranium extraction from seawater and nuclear wastewater.

Ultrafast extraction of uranium from seawater using photosensitized biohybrid system with bioinspired cascaded strategy

The highly effective utilization of uranium resources in global seawater is a viable method to satisfy the rising demands for fueling nuclear energy industry. Herein, inspired by the multi-mechanisms of the marine bacteria for uranium immobilization, CdS nanoparticles are deposited on the cell of marine bacterial strain Bacillus velezensis UUS-1 to create a photosensitized biohybrid system UUS-1/CdS. This system achieves high uranium extraction efficiency using a cascaded strategy, where the bacterial cells guarantee high extraction selectivity and the photosensitive CdS nanoparticles realize cascading photoreduction of high soluble U(VI) to low soluble U(IV) to enhance extraction capacity. As one of the fastest-acting adsorbents in natural seawater, a high extraction capacity for uranium of 7.03 mg g^-1 is achieved with an ultrafast extraction speed of 4.69 mg g^-1 d^-1. The cascaded strategy promisingly improves uranium extraction performance and pioneers a new direction for the design of adsorbents to extract uranium from seawater.

Uranium extraction from seawater: material design, emerging technologies and marine engineering

Uranium extraction from seawater (UES), a potential approach to securing the long-term uranium supply and sustainability of nuclear energy, has experienced significant progress in the past decade. Promising adsorbents with record-high capacities have been developed by diverse innovative synthetic strategies, and scale-up marine field tests have been put forward by several countries. However, significant challenges remain in terms of the adsorbents' properties in complex marine environments, deployment methods, and the economic viability of current UES systems. This review presents an up-to-date overview of the latest advancements in the UES field, highlighting new insights into the mechanistic basis of UES and the methodologies towards the function-oriented development of uranium adsorbents with high adsorption capacity, selectivity, biofouling resistance, and durability. A distinctive emphasis is placed on emerging electrochemical and photochemical strategies that have been employed to develop efficient UES systems. The most recent achievements in marine tests by the major countries are summarized. Challenges and perspectives related to the fundamental, technical, and engineering aspects of UES are discussed. This review is envisaged to inspire innovative ideas and bring technical solutions towards the development of technically and economically viable UES systems.

Engineering Polymeric Nanofluidic Membranes for Efficient Ionic Transport: Biomimetic Design, Material Construction, and Advanced Functionalities

Design elements extracted from biological ion channels guide the engineering of artificial nanofluidic membranes for efficient ionic transport and spawn biomimetic devices with great potential in many cutting-edge areas. In this context, polymeric nanofluidic membranes can be especially attractive because of their inherent flexibility and benign processability, which facilitate massive fabrication and facile device integration for large-scale applications. Herein, the state-of-the-art achievements of polymeric nanofluidic membranes are systematically summarized. Theoretical fundamentals underlying both biological and synthetic ion channels are introduced. The advances of engineering polymeric nanofluidic membranes are then detailed from aspects of structural design, material construction, and chemical functionalization, emphasizing their broad chemical and reticular/topological variety as well as considerable property tunability. After that, this Review expands on examples of evolving these polymeric membranes into macroscopic devices and their potentials in addressing compelling issues in energy conversion and storage systems where efficient ion transport is highly desirable. Finally, a brief outlook on possible future developments in this field is provided.

Secondary Metabolites from Marine-Derived Bacillus: A Comprehensive Review of Origins, Structures, and Bioactivities

The marine is a highly complex ecosystem including various microorganisms. Bacillus species is a predominant microbialflora widely distributed in marine ecosystems. This review aims to provide a systematic summary of the newly reported metabolites produced by marine-derived Bacillus species over recent years covering the literature from 2014 to 2021. It describes the structural diversity and biological activities of the reported compounds. Herein, a total of 87 newly reported metabolites are included in this article, among which 49 compounds originated from marine sediments, indicating that marine sediments are majority sources of productive strains of Bacillus species Therefore, marine-derived Bacillus species are a potentially promising source for the discovery of new metabolites.

Theory-Guided Design of a Method to Obtain Competitive Balance between U(VI) Adsorption and Swaying Zwitterion-Induced Fouling Resistance on Natural Hemp Fibers

The competitive balance between uranium (VI) (U(VI)) adsorption and fouling resistance is of great significance in guaranteeing the full potential of U(VI) adsorbents in seawater, and it is faced with insufficient research. To fill the gap in this field, a molecular dynamics (MD) simulation was employed to explore the influence and to guide the design of mass-produced natural hemp fibers (HFs). Sulfobetaine (SB)- and carboxybetaine (CB)-type zwitterions containing soft side chains were constructed beside amidoxime (AO) groups on HFs (HFAS and HFAC) to form a hydration layer based on the terminal hydrophilic groups. The soft side chains were swayed by waves to form a hydration-layer area with fouling resistance and to simultaneously expel water molecules surrounding the AO groups. HFAS exhibited greater antifouling properties than that of HFAO and HFAC. The U(VI) adsorption capacity of HFAS was almost 10 times higher than that of HFAO, and the max mass rate of U:V was 4.3 after 35 days of immersion in marine water. This paper offers a theory-guided design of a method to the competitive balance between zwitterion-induced fouling resistance and seawater U(VI) adsorption on natural materials.

A poly(amidoxime)-modified MOF macroporous membrane for high-efficient uranium extraction from seawater

Although metal–organic frameworks (MOFs) own excellent uranium adsorption capacity but are still difficult to conveniently extract uranium from seawater due to the discrete powder state. In this study, a new MOF-based macroporous membrane has been explored, which can high-efficiently extract uranium through continuously filtering seawater. Through modifying the UiO-66 with poly(amidoxime) (PAO), it can disperse well in a N,N-dimethylformamide solution of graphene oxide and cotton fibers. Then, the as-prepared super-hydrophilic MOF-based macroporous membrane can be fabricated after simple suction filtration. Compared with nonmodified MOFs, this UiO-66@PAO can be dispersed uniformly in the membrane because it can stabilize well in the solution, which have largely enhanced uranium adsorbing capacity owing to the modified PAO. Last but not least, different from powder MOFs, this UiO-66@PAO membrane provides the convenient and continuously uranium adsorbing process. As a consequence, the uranium extraction capacity of this membrane can reach 579 mg·g−1 in 32 ppm U-added simulated seawater for only 24 h. Most importantly, this UiO-66@PAO membrane (100 mg) can remove 80.6% uranyl ions from 5 L seawater after 50 filtering cycles. This study provides a universal method to design and fabricate a new MOF-based adsorbent for high-efficient uranium recovery from seawater.

Amidoxime Group-Anchored Single Cobalt Atoms for Anti-Biofouling during Uranium Extraction from Seawater

Marine biofouling is one of the most significant challenges hindering practical uranium extraction from seawater. Single atoms have been widely used in catalytic applications because of their remarkable redox property, implying that the single atom is highly capable of catalyzing the generation of reactive oxygen species (ROS) and acts as an anti-biofouling substance for controlling biofouling. In this study, the Co single atom loaded polyacrylamidoxime (PAO) material, PAO-Co, is fabricated based on the binding ability of the amidoxime group to uranyl and cobalt ions. Nitrogen and oxygen atoms from the amidoxime group stabilize the Co single atom. The fabricated PAO-Co exhibits a broad range of antimicrobial activity against diverse marine microorganisms by producing ROS, with an inhibition rate up to 93.4%. The present study is the first to apply the single atom for controlling biofouling. The adsorbent achieves an ultrahigh uranium adsorption capacity of 9.7 mg g-1 in biofouling-containing natural seawater, which decreased only by 11% compared with that in biofouling-removed natural seawater. These findings indicate that applying single atoms would be a promising strategy for designing biofouling-resistant adsorbents for uranium extraction from seawater.

Highly efficient immobilization of environmental uranium contamination with Pseudomonas stutzeri by biosorption, biomineralization, and bioreduction

Uranium is a heavy metal with both chemotoxicity and radiotoxicity. Due to the increasing consumption of uranium, the remediation of uranium contamination and recovery of uranium from non-conventional approach is highly needed. Microorganism exhibits high potential for immobilization of uranium. This study for the first time isolated a marine Pseudomonas stutzeri strain MRU-UE1 with high uranium immobilization capacity of 308.72 mg/g, which is attributed to the synergetic mechanisms of biosorption, biomineralization, and bioreduction. The uranium is found to be immobilized in forms of tetragonal chernikovite (H₂(UO₂)₂(PO₄)₂·8H₂O) by biomineralization and CaU(PO₄)₂ by bioreduction under aerobic environment, which is rarely observed and would broaden the application of this strain in aerobic condition. The protein, phosphate group, and carboxyl group are found to be essential for the biosorption of uranium. In response to the stress of uranium, the strain produces inorganic phosphate group, which transformed soluble uranyl ion to insoluble uranium-containing precipitates, and poly-β-hydroxybutyrate (PHB), which is observed for the first time during the interaction between microorganism and uranium. In summary, P. stutzeri strain MRU-UE1 would be a promising alternative for environmental uranium contamination remediation and uranium extraction from seawater.

Application of poly(vinylphosphonic acid) modified poly(amidoxime) in uptake of uranium from seawater

To enhance the anti-biofouling properties and adsorption capability of poly(amidoxime) (PAO), vinylphosphonic acid (VPA, CH2[double bond, length as m-dash]CH-PO3H2) was polymerized on poly(acrylonitrile) (PAN) surface by plasma technique, followed by amidoximation treatment to convert the cyano group (-C[triple bond, length as m-dash]N) into an amidoxime group (AO, -C(NH2)[double bond, length as m-dash]N-OH). The obtained poly(vinylphosphonic acid)/PAO (PVPA/PAO) was used as an adsorbent in the uptake of U(vi) from seawater. The effect of environmental conditions on the anti-biofouling property and adsorption capability of PVPA/PAO for U(vi) were studied. Results show that the modified PVPA enhances the anti-biofouling properties and adsorption capability of PAO for U(vi). The adsorption process is well described by the pseudo-second-order kinetic model and reached equilibrium in 24 h. Adsorption isotherms of U(vi) on PVPA/PAO can be well fitted by the Langmuir model, and the maximum adsorption capability was calculated to be 145 mg g-1 at pH 8.2 and 298 K. Experimental results highlight the application of PVPA/PAO in the extraction of U(vi) from seawater.

Functionalized Iron-Nitrogen-Carbon Electrocatalyst Provides a Reversible Electron Transfer Platform for Efficient Uranium Extraction from Seawater

Uranium extraction from seawater provides an opportunity for sustainable fuel supply to nuclear power plants. Herein, an adsorption-electrocatalysis strategy is demonstrated for efficient uranium extraction from seawater using a functionalized iron-nitrogen-carbon (Fe-N_x -C-R) catalyst, comprising N-doped carbon capsules supporting FeN_x single-atom sites and surface chelating amidoxime groups (R). The amidoxime groups bring hydrophilicity to the adsorbent and offer surface-specific binding sites for UO₂ ²⁺ capture. The site-isolated FeN_x centres reduce adsorbed UO₂ ²⁺ to UO₂ ⁺ . Subsequently, through electrochemical reduction of the FeN_x sites, unstable U(V) ions are reoxidized to U(VI) in the presence of Na⁺ resulting in the generation of solid Na₂ O(UO₃ ·H₂ O)_x , which can easily be collected. Fe-N_x -C-R reduced the uranium concentration in seawater from ≈3.5 ppb to below 0.5 ppb with a calculated capacity of ≈1.2 mg g^-1 within 24 h. To the best of the knowledge, the developed system is the first to use the adsorption of uranyl ions and electrodeposition of solid Na₂ O(UO₃ .H₂ O)_x for the extraction of uranium from seawater. The important discoveries guide technology development for the efficient extraction of uranium from seawater.

Constructing Uranyl-Specific Nanofluidic Channels for Unipolar Ionic Transport to Realize Ultrafast Uranium Extraction

High-speed capturing of uranyl (UO₂²⁺) ions from seawater elicits unprecedented interest for the sustainable development of the nuclear energy industry. However, the ultralow concentration (∼3.3 μg L^-1) of uranium element leads to the slow ion diffusion inside the adsorbent particle, especially after the transfer paths are occupied by the coexisted interfering ions. Considering the geometric dimension of UO₂²⁺ ion (a maximum length of 6.04-6.84 Å), the interlayer spacing of graphene sheets was covalently pillared with phenyl-based units into twice the ionic length (13 Å) to obtain uranyl-specific nanofluidic channels. Applying a negative potential (-1.3 V), such a charge-governed region facilitates a unipolar ionic transport, where cations are greatly accelerated and co-ions are repelled. Notably, the resulting adsorbent gives the highest adsorption velocity among all reported materials. The adsorption capacity measured after 56 days of exposure in natural seawater is evaluated to be ∼16 mg g^-1. This novel concept with rapid adsorption, high capacity, and facile operating process shows great promise to implement in real-world uranium extraction.

Bioinspired Durable Antibacterial and Antifouling Coatings Based on Borneol Fluorinated Polymers: Demonstrating Direct Evidence of Antiadhesion

Substituting natural products for traditional poison-killing antifouling agents is an efficient and promising method to alleviate the increasingly serious ecological crisis and aggravate the loss due to marine biofouling. Herein, the successful synthesis of poly(methyl methacrylate-co-ethyl acrylate-co-hexafluorobutyl methacrylate-co-isobornyl methacrylate) copolymer (PBAF) with borneol monomers and fluorine by a free radical polymerization method is reported. The PBA_0.09F coating exhibits outstanding antibacterial and antifouling activity, achieving 98.2% and 92.3% resistance to Escherichia coli and Staphylococcus aureus, respectively, and the number of Halamphora sp. adhesion is only 26 (0.1645 mm²) in 24 h. This remarkable antibacterial and antifouling performance is attributed to the incorporation of fluorine components into the copolymer, which induces a low surface energy and hydrophobicity and the complex molecular structure of the natural nontoxic antifouling agent borneol. In addition, the results showed that the contents of the adhesion-related proteins mfp-3, mfp-5, and mfp-6 were significantly reduced, which proved that natural substances affect the secretion of biological proteins. Importantly, the PBAF coating exhibits excellent environmental friendliness and long-term stability. The antifouling mechanism is clarified, and an effective guide for an environmentally friendly antifouling coating design is proposed.

Covalent Organic Framework Sponges for Efficient Solar Desalination and Selective Uranium Recovery

Energy and fresh water are essential for the sustainable development of human society, and both could be obtained from seawater. Herein, we explored the first covalent organic framework (COF) sponge (named BHMS) by in situ loading the benzoxazole-linked COF (DBD-BTTH) onto a porous polymer scaffold (polydimethylsiloxane) as a synergistic platform for efficient solar desalination and selective uranium recovery. In natural seawater, BHMS shows a high evaporation rate (1.39 kg m^-2 h^-1) and an exceptional uranium recovery capacity (5.14 ± 0.15 mg g^-1) under 1 sun, which are due to its desirable inbuilt structural hierarchy and elastic macroporous open cells providing adequate water transport, increased evaporation sites of seawater, and selective binding sites of uranyl. Besides, the excellent photothermal performance and photocatalytic activity endow the BHMS with high solar desalination efficiency and excellent anti-biofouling activity and promote selective coordination of uranyl.

Interface-Constrained Layered Double Hydroxides for Stable Uranium Capture in Highly Acidic Industrial Wastewater

Low acid endurance of layered double hydroxides (LDHs) limits their uranium(VI) [U(VI)] adsorption capability from harsh industrial wastewater. Here, we demonstrate magnesium-cobalt LDHs (Mg-Co LDHs) anchored in situ onto the pore channel of dendritic fibrous nanosilica (DFNS) via an interface-constrained strategy. The synergy of Mg-Co LDHs and DFNS not only improves the endurance of the Mg-Co LDH under harsh acidic conditions but also increases the number of active sites of DFNS. Thus, DFNS@Mg-Co LDH shows a high U(VI) uptake capacity (1143 mg g^-1) at pH = 3 and C₀ = 598.7 mg L^-1, which is about 4.8-fold higher than that of pristine DFNS. The DFNS@Mg-Co LDH exhibits excellent U(VI) uptake in various background water circumstances due to its acid endurance and highly selective adsorption. This interface-constrained strategy provides LDH materials with durability under extremely acidic conditions along with a high adsorption capacity, which is promising for uranium capture from various water fields.

Low Band Gap Benzoxazole-Linked Covalent Organic Frameworks for Photo-Enhanced Targeted Uranium Recovery

The inherent features of covalent organic frameworks (COFs) make them highly attractive for uranium recovery applications. A key aspect yet to be explored is how to improve the selectivity and efficiency of COFs for recovering uranium from seawater. To achieve this goal, a series of robust and hydrophilic benzoxazole-based COFs is developed (denoted as Tp-DBD, Bd-DBD, and Hb-DBD) as efficient adsorbents for photo-enhanced targeted uranium recovery. Benefiting from the hydroxyl groups and the formation of benzoxazole rings, the hydrophilic Tp-DBD shows outstanding stability and chemical reduction properties. Meanwhile, the synergistic effect of the hydroxyl groups and the benzoxazole rings in the π-conjugated frameworks significantly decrease the optical band gap, and improve the affinity and capacity to uranium recovery. In seawater, the adsorption capacity of uranium is 19.2× that of vanadium, a main interfering metal in uranium extraction.

Sulfonated perylene-based conjugated microporous polymer as a high-performance adsorbent for photo-enhanced uranium extraction from seawater

A sulfonated perylene-based adsorbent is prepared for photo-enhanced uranium extraction from seawater. Owing to the photo-enhanced effect, the uranium extraction capacity of PyB-SO₃H in seawater reaches 1989 mg g⁻¹, with 90% extraction efficiency.

Low optical dosage heating-reduced viscosity for fast and large-scale cleanup of spilled crude oil by reduced graphene oxide melamine nanocomposite adsorbents

Heating under low solar radiation intensity is demonstrated to facilitate the cleaning of crude oil by the hydrophobic nanocomposite adsorbents of reduced graphene oxide (RGO) melamine sponge (MS@RGO) foams. The heat generated by the irradiation reduces the viscosity of the crude oil, and consequently increases the oil-diffusion coefficient of the pores of the MS@RGO foams and speeds up the oil-sorption rate. Even under a solar radiation intensity as low as 2 kW m^-2, the temperature of crude oil rapidly rises to 68 °C or higher within 10 min. It only takes 29 s to completely absorb 6 g of crude oil at 60 °C by three tiny pieces of MS@RGO foam. This work makes better use of the excellent photothermal conversion characteristics of crude oil, and its photothermal conversion mechanism under simulated solar radiation is also discussed. This methodology can be adopted to clean up viscous crude oil or extract other chemicals effectively at a large scale, and provides a complete solution for the cleanup of crude oil in the sea or on the beach for actual engineering applications.

Anti-Biofouling and Water-Stable Balanced Charged Metal Organic Framework-Based Polyelectrolyte Hydrogels for Extracting Uranium from Seawater

Metal-organic frameworks (MOFs) are diffusely defined as a promising class of porous material for uranium extraction from seawater, but there are still challenges in their stability and anti-biofouling performance. Herein, a water-stable and anti-biofouling ZIF-67/SAP_0.45 composite hydrogel was reported by the sequential processes of electrostatic interactions between the oppositely charged polymer, ionic gelation, and template growth of ZIF-67 crystals. Entanglement of positively charged polyethyleneimine (PEI) and negatively charged sodium alginate (SA) polymer chains provided external porosities, anti-biofouling properties, and mechanical support for the hydrogels and further reduced the possibility of ZIF-67 aggregation. The neutral composite hydrogel possessed the least Nitzschia on the surface after 7 days contact, which endows the adsorbent with a high uranium uptake capacity of 2107.87 ± 41.64 μg g^-1 at 1 mg L^-1 uranium-containing seawater with 8.6 × 10⁵ mL^-1 Nitzschia. Additionally, this adsorbent showed water stability with an uranium uptake capacity of 232.88 ± 8.02 mg g^-1 even after five adsorption-desorption cycles because of the excellent preparation method. Benefitting from the distinctive hierarchical structure and large accessible surface area, the resultant adsorbent achieved a high uranium capacity of 6.99 ± 0.26 mg g^-1 in real seawater. This flexible and scalable approach made the MOF/SAP composite hydrogel a highly desirable uranium adsorbent.

Positively charged conjugated microporous polymers with antibiofouling activity for ultrafast and highly selective uranium extraction from seawater

Uranium high-efficiency separation from seawater still has some obstacles such as slow sorption rate, poor selectivity and biofouling. Herein, we report a strategy for ultrafast and highly selective uranium extraction from seawater by positively charged conjugated microporous polymers (CMPs). The polymers are synthesized by Sonogashira-Hagihara cross-coupling reaction of 1,3-dibromo-5,5-dimethylhydantoin and 1,3,5-triethynylbenzene, and then modified with oxime and carboxyl via click reaction. The CMPs show an ultrafast sorption (0.46 mg g^-1 day^-1) for uranium, and possess an outstanding selectivity with a high sorption capacity ratio of U/V (8.4) in real seawater. The study of adsorption process and mechanism indicate that the CMPs skeleton exhibits high affinity for uranium and can accelerate the sorption, and uranium(VI) is adsorbed on the materials by the interaction of oxime/carboxyl ligands and hydantoin. Moreover, the material can be simply loaded onto the filter membrane, and shows remarkable antibiofouling properties against E. coli and S. aureus and excellent uptake capacity for uranium with low concentration in real seawater. This work may provide a promising approach to design adsorbents with fast adsorption rate, high selectivity and antibacterial activity, and expand the thinking over the development of novel and highly efficient adsorbents for uranium extraction from seawater.

Optimizing nanocarbon shell in zero-valent iron nanoparticles for improved electron utilization in Cr(VI) reduction

A core-shell structured zero-valent iron@carbon (ZVI@C) nanocompoiste was designed to improve the electron utilization of ZVI in the Cr(VI) reduction. The porosity of carbon layer in ZVI@C was optimized for improving the efficiency of electron utilization of ZVI in the Cr(VI) reduction process. The porous structure of carbon layer was controllably synthesized by adjusting the carbon source and the ratio of C/Fe in the precursor. The glucose was suggested as the optimal carbon source, and a high specific surface area (37.067 m²/g) was reached for the prepared ZVI@C when the ratio of C/Fe was controlled at 20. These ZVI@C performed well on Cr(VI) reduction, e.g. a complete reduction of Cr(VI) (2 mg/L) to Cr(III) within 10 min. The removal capacity (800 mg/g) exceeded previously recorded ZVI based adsorbents. The pH and initial Cr(VI) concentration were demonstrated as the key factors for the efficient electron utilization of ZVI. Furthermore, the efficiency of electron utilization of the ZVI increased up to 80% when the concentration of Cr(VI) was 2000 mg/L and the pH was controlled at 3, which was much higher than 8% of the naked ZVI.

Advances in Template Prepared Nano-Oxides and their Applications: Polluted Water Treatment, Energy, Sensing and Biomedical Drug Delivery

The nano-oxide materials with special structures prepared by template methods have a good dispersion, regular structures and high specific surface areas. Therefore, in some areas, improved properties are observed than conventional bulk oxide materials. For example, in the treatment of dye wastewater, the treatment efficiency of adsorbents and catalytic materials prepared by template method was about 30 % or even higher than that of conventional samples. This review mainly focuses on the progress of inorganic, organic and biological templates in the preparation of micro- and nano- oxide materials with special morphologies, and the roles of the prepared materials as adsorbents and photocatalysts in dye wastewater treatment. The characteristics and advantages of inorganic, organic and biological template are also summarized. In addition, the applications of template method prepared oxides in the field of sensors, drug carrier, energy materials and other fields are briefly discussed with detailed examples.

Grafting functional groups in metal–organic frameworks for U(vi) sorption from aqueous solutions

Recent highlights of the organic groups-functionalized MOFs for uranium extraction from aqueous solution are discussed.

One-step co-precipitation synthesis of novel BiOCl/CeO2composites with enhanced photodegradation of rhodamine B

BiOCl/CeO₂composites were synthesized by a facile one-step co-precipitation method and showed good photodegradation activity of rhodamine B (RhB).