Template-Assisted Formation of High-Quality α-Phase HC(NH2)2PbI3 Perovskite Solar Cells

A crystal capping layer for formation of black-phase FAPbI3 perovskite in humid air

Black-phase formamidinium lead iodide (α-FAPbI3) perovskites are the desired phase for photovoltaic applications, but water can trigger formation of photoinactive impurity phases such as δ-FAPbI3. We show that the classic solvent system for perovskite fabrication exacerbates this reproducibility challenge. The conventional coordinative solvent dimethyl sulfoxide (DMSO) promoted δ-FAPbI3 formation under high relative humidity (RH) conditions because of its hygroscopic nature. We introduced chlorine-containing organic molecules to form a capping layer that blocked moisture penetration while preserving DMSO-based complexes to regulate crystal growth. We report power conversion efficiencies of >24.5% for perovskite solar cells fabricated across an RH range of 20 to 60%, and 23.4% at 80% RH. The unencapsulated device retained 96% of its initial performance in air (with 40 to 60% RH) after 500-hour maximum power point operation.

All-Inorganic Perovskite Solar Cells: Defect Regulation and Emerging Applications in Extreme Environments

All-inorganic perovskite solar cells (PSCs), such as CsPbX3, have garnered considerable attention recently, as they exhibit superior thermodynamic and optoelectronic stabilities compared to the organic-inorganic hybrid PSCs. However, the power conversion efficiency (PCE) of CsPbX3 PSCs is generally lower than that of organic-inorganic hybrid PSCs, as they contain higher defect densities at the interface and within the perovskite light-absorbing layers, resulting in higher non-radiative recombination and voltage loss. Consequently, defect regulation has been adopted as an important strategy to improve device performance and stability. This review aims to comprehensively summarize recent progresses on the defect regulation in CsPbX3 PSCs, as well as their cutting-edge applications in extreme scenarios. The underlying fundamental mechanisms leading to the defect formation in the crystal structure of CsPbX3 PSCs are firstly discussed, and an overview of literature-adopted defect regulation strategies in the context of interface, internal, and surface engineering is provided. Cutting-edge applications of CsPbX3 PSCs in extreme environments such as outer space and underwater situations are highlighted. Finally, a summary and outlook are presented on future directions for achieving higher efficiencies and superior stability in CsPbX3 PSCs.

1-Adamantanamine Hydrochloride Resists Environmental Corrosion to Obtain Highly Efficient and Stable Perovskite Solar Cells

Passivating the defective surface of perovskite film is a promising strategy to improve the stability and efficiency of perovskite solar cells (PSCs). Herein, 1-adamantanamine hydrochloride (ATH) is introduced to the upper surface of the perovskite film to heal the defects of the perovskite surface. The best-performance ATH-modified device has a higher efficiency (23.45%) than the champion control device (21.53%). The defects are passivated, interfacial nonradiative recombination is suppressed, and interface stress is released by the ATH deposited on the perovskite film, leading to longer carrier lifetimes and enhancement in open-circuit voltage (V_OC) and fill factor (FF) of the PSCs. With obvious improvement, V_OC and FF of 1.159 V and 0.796 for the control device are raised to 1.178 V and 0.826 for the ATH-modified device, respectively. Finally, during an operational stability measurement of more than 1000 h, the ATH-treated PSC exhibited better moisture resistance, thermal persistence, and light stability.

Peculiar Steric Hindrance Assists Monoclinic Phase Formation toward High-Quality All-Inorganic Perovskites

Bromine-containing metal halide all-inorganic perovskite CsPbI₂Br exhibits excellent photoelectric performance and supreme thermal and structural stabilities; it is thus attractive for use as photoabsorbing layers in perovskite solar cells (PSCs). However, when steric hindrance molecules are introduced, the complicated phase transition mechanism and the difficult-to-control crystallization process in CsPbI₂Br are not well understood. Here, we introduce a class of sterically hindered cesium naphthenate small molecules to control the crystallization process of CsPbI₂Br films. Of interest, a new intermediate monoclinic phase has been discovered which leads to formation of dense and nonporous polycrystalline perovskite films. This phenomenon was also explained by density functional theory. The residues of steric hindrance molecules inside the CsPbI₂Br film also improve its stability. We further show that as the ring number of cycloalkanes increases, the hindrance for the crystallization becomes more significant. Thus, by choosing the suitable steric hindrance, the optimal photovoltaic efficiency is 15.45%.

Temperature-Assisted Crystal Growth of Photovoltaic α-Phase FAPbI3 Thin Films by Sequential Blade Coating

Formamidinium lead triiodide (FAPbI₃) exhibits the smallest band gap among lead halide perovskites, which is more desirable for solar cell applications compared to methylammonium-based counterparts. However, it remains a big challenge to prepare phase-pure α-FAPbI₃ in addition to controlling the crystal morphology during film formation. Herein, we developed a temperature-assisted crystal growth to prepare high-quality thin films of α-FAPbI₃ by sequential blade coating. It is found that depositing organic cation FAI at elevated temperatures facilitates the growth of α-FAPbI₃, which otherwise yields mainly a yellow δ-phase at room temperature. In parallel, the crystal morphology of the perovskite films can be effectively manipulated by taking advantage of the porous structure of PbI₂. Solar cells prepared with the blade-coated α-FAPbI₃ yield a champion efficiency of 18.41%, which is among the highest values for FAPbI₃-only solar devices. These results suggest that two-step sequential blade deposition offers a viable approach to fabricate high-quality α-FAPbI₃ films for optoelectronic applications.

Solvent Engineering Using a Volatile Solid for Highly Efficient and Stable Perovskite Solar Cells

A strategy for efficaciously regulating perovskite crystallinity is proposed by using a volatile solid glycolic acid (HOCH2COOH, GA) in an FA0.85MA0.15PbI3 (FA: HC(NH2)2; MA: CH3NH3) perovskite precursor solution that is different from the common additive approach. Accompanied with the first dimethyl sulfoxide sublimation process, the subsequent sublimation of GA before 150 °C in the FA0.85MA0.15PbI3 perovskite film can artfully regulate the perovskite crystallinity without any residual after annealing. The improved film formation upon GA modification induced by the strong interaction between GA and Pb2+ delivers a champion power conversion efficiency (PCE) as high as 21.32%. In order to investigate the role of volatility in perovskite solar cells (PSCs), nonvolatile thioglycolic acid (HSCH2COOH, TGA) with a similar structure to GA is utilized as an additive reference. Large perovskite grains are obtained by TGA modification but with obvious pinholes, which directly leads to an increased defect density accompanied by a decline in PCE. Encouragingly, the champion PCE achieved for GA-based PSC device (21.32%) is almost 13% or 20% higher than those of the control device or TGA-based device. In addition, GA-modified PSCs exhibit the best stability in light-, thermal-, and humidity-based tests due to the improved film formation.