Bimetallic Mixed Clusters Highly Loaded on Porous 2D Graphdiyne for Hydrogen Energy Conversion

The Accurate Synthesis of a Multiscale Metallic Interface on Graphdiyne

The accurate construction of composite material systems containing graphdiyne (GDY) and other metallic materials has promoted the formation of innovative structures and practical applications in the fields of energy, catalysis, optoelectronics, and biomedicine. To fulfill the practical requirements, the precise formation of multiscale interfaces over a wide range, from single atoms to nanostructures, plays an important role in the optimization of the structural design and properties. The intrinsic correlations between the structure, synthesis process, characteristic properties, and device performance are systematically investigated. This review outlines the current research achievements regarding the controlled formation of multiscale metallic interfaces on GDY. Synthetic strategies for interface regulation, as well as the correlation between the structure and performance, are presented. Furthermore, innovative research ideas for the design and synthesis of functional metal-based materials loaded onto GDY-based substances are also provided, demonstrating the promising application potential of GDY-based materials.

Theoretical Prediction Leads to Synthesize GDY Supported InOx Quantum Dots for CO2 Reduction

The preparation of formic acid by direct reduction of carbon dioxide is an important basis for the future chemical industry and is of great significance. Due to the serious shortage of highly active and selective electrocatalysts leading to the development of direct reduction of carbon dioxide is limited. Herein the target catalysts with high CO2RR activity and selectivity were identified by integrating DFT calculations and high-throughput screening and by using graphdiyne (GDY) supported metal oxides quantum dots (QDs) as the ideal model. It is theoretically predicted that GDY supported indium oxide QDs (i.e., InOx/GDY) is a new heterostructure electrocatalyst candidate with optimal CO2RR performance. The interfacial electronic strong interactions effectively regulate the surface charge distribution of QDs and affect the adsorption/desorption behavior of HCOO* intermediate during CO2RR to achieve highly efficient CO2 conversion. Based on the predicted composition and structure, we synthesized the advanced catalytic system, and demonstrates superior CO2-to-HCOOH conversion performance. The study presents an effective strategy for rational design of highly efficient heterostructure electrocatalysts to promote green chemical production.

Fabrication of Zn-Air Battery with High Output Capacity Under Ultra-Large Current

Zn-air battery (ZAB) is advocated as a more viable option in the new-energy technology. However, the limited-output capacity at a high current density impedes the driving range in power batteries substantially. Here, a novel heterojunction-based graphdiyne (GDY) and Ag29Cu7 alloy quantum dots (Ag29Cu7 QDs/GDY) for constructing a high-performance aqueous ZAB are fabricated. The as-fabricated ZAB achieves discharge at up to 100 mA cm-2 (the highest value ever reported) along with a remarkable output specific capacity of 786.2 mAh g-1 Zn, which is mainly benefitted from the binary-synergistic effect toward a stable triple-phase interface for air electrode induced by the Ag29Cu7 QDs and GDY in harsh base, together with the decreasing reaction energy barrier and polarization. The results outperform the superior reports discharging at low current and will bring breakthrough progress toward the practical applications of ZAB on large power supply facilities.

Robust Ru-VO2 Bifunctional Catalysts for All-pH Overall Water Splitting

Designing robust bifunctional catalysts for oxygen evolution reaction (OER) and hydrogen evolution reaction in all-pH conditions for overall water splitting (OWS) is an effective way to achieve sustainable development. Herein, a composite Ru-VO2 containing Ru-doped VO2 and Ru nanoparticles (NPs) is synthesized, and it shows a high OWS performance in full-pH range due to their synergist effect. In particular, the OER mass activities of Ru-VO2 at 1.53 V (vs RHE) in acidic, alkaline, and PBS solutions are ≈65, 36, and 235 times of commercial RuO2 in the same conditions. The "Ru-VO2 || Ru-VO2 " two-electrode electrolyzer only needs a voltage of 1.515 V (at 10 mA cm-2 ) in acidic water splitting, which can operate stably for 125 h at 10 mA cm-2 without significant voltage decay. In situ Raman spectra and in situ differential electrochemical mass spectrometry prove that the OER of Ru-VO2 in acid follows the adsorption evolution mechanism. Density functional theory calculations further reveal the synergistic effect between Ru NP and Ru-doped VO2 , which breaks the hydrogen bond network formed by *OH adsorbed on the Ru single-atom site, and thereby significantly enhances the OER activity. This work provides new insights into the design of novel bifunctional pH-universal catalysts for OWS.

Modification Strategies for Development of 2D Material-Based Electrocatalysts for Alcohol Oxidation Reaction

2D materials, such as graphene, MXenes (metal carbides and nitrides), graphdiyne (GDY), layered double hydroxides, and black phosphorus, are widely used as electrocatalyst supports for alcohol oxidation reactions (AORs) owing to their large surface area and unique 2D charge transport channels. Furthermore, the development of highly efficient electrocatalysts for AORs via tuning the structure of 2D support materials has recently become a hot area. This article provides a critical review on modification strategies to develop 2D material-based electrocatalysts for AOR. First, the principles and influencing factors of electrocatalytic oxidation of alcohols (such as methanol and ethanol) are introduced. Second, surface molecular functionalization, heteroatom doping, and composite hybridization are deeply discussed as the modification strategies to improve 2D material catalyst supports for AORs. Finally, the challenges and perspectives of 2D material-based electrocatalysts for AORs are outlined. This review will promote further efforts in the development of electrocatalysts for AORs.

Boosting Fe Cationic Vacancies with Graphdiyne to Enhance Exceptional Pseudocapacitive Lithium Intercalation

Modulating the electronic structure of electrode materials at atomic level is the key to controlling electrodes with outstanding rate capability. On the basis of modulating the iron cationic vacancies (IV) and electronic structure of materials, we proposed the method of preparing graphdiyne/ferroferric oxide heterostructure (IV-GDY-FO) as anode materials. The goal is to motivate lithium-ion batteries (LIBs) toward ultra-high capacity, superior cyclic stability, and excellent rate performance. The graphdiyne is used as carriers to disperse Fe3 O4 uniformly without agglomeration and induce high valence of Fe with reducing the energy in the system. The presence of Fe vacancy could regulate the charge distribution around vacancies and adjacent atoms, leading to facilitate electronic transportation, enlarge the lithium-ion diffusion, and decrease Li+ diffusion barriers, and thus displaying significant pseudocapacitive process and advantageous lithium-ion storage. The optimized electrode IV-GDY-FO reveals a capacity of 2084.1 mAh g-1 at 0.1 C, superior cycle stability and rate performance with a high specific capacity of 1057.4 mAh g-1 even at 10 C.

Construction of Reinforced Self-Cleaning and Efficient Photothermal PDMS@GDY@Cu Sponges toward Anticorrosion and Antibacterial Applications

Copper (Cu)-based materials are widely used in many fields from industry to life, including marine, medical apparatus and instruments, and microelectronic devices owing to their superior thermal, electrical, and mechanical properties. However, the interaction of copper with aggressive and fouling liquids under normal circumstances easily brings about severe bacterial accumulation, resulting in undesirable functionality degeneration and bacterial infections. In this contribution, we reported a novel copper-based sponge, polydimethylsiloxane (PDMS)@graphdiyne (GDY)@Cu, constructed by in situ synthesis of GDY on a commercial Cu sponge, followed by the modification of PDMS. The as-fabricated PDMS@GDY@Cu sponge not only possesses excellent self-cleaning activity against the pollution of daily drinks and dirt due to an improved static contact angle (~136°), but also display a remarkably enhanced anticorrosion performance, attributed to intimate coverage of chemically stable GDY and PDMS on the Cu sponge. Based on high photothermal effect of GDY, the PDMS@GDY@Cu sponge also displays significantly improved antibacterial activities under irradiation. In addition, due to excellent chemical stability of PDMS and GDY, self-cleaning behavior and photothermal-assisted antibacterial performance are well maintained after long-term attack of bacteria. These results demonstrate that GDY-based functional coatings hold great promises in the protection of copper devices under harsh conditions.

Advances in the Electrocatalytic Hydrogen Evolution Reaction by Metal Nanoclusters-based Materials

With the development of renewable energy systems, clean hydrogen is burgeoning as an optimal alternative to fossil fuels, in which its application is promising to retarding the global energy and environmental crisis. The hydrogen evolution reaction (HER), capable of producing high-purity hydrogen rapidly in electrocatalytic water splitting, has received much attention. Abundant research about HER has been done, focusing on advanced electrocatalyst design with high efficiency and robust stability. As potential HER catalysts, metal nanoclusters (MNCs) have been studied extensively. They are composed of several to a hundred metal atoms, with sizes being comparable to the Fermi wavelength of electrons, that is, < 2.0 nm. Different from metal atoms/nanoparticles, they exhibit unique catalytic properties due to their quantum size effect and low-coordination environment. In this review, the activity-enhancing approaches of MNCs applied in HER electrocatalysis are mainly summarized. Furthermore, recent progress in MNCs classified with different stabilization strategies, that is, the freestanding MNCs, MNCs with organic, metal and carbon supports, are introduced. Finally, the current challenges and deficiencies of these MNCs for HER are prospected.

Bimetal Modulation Stabilizing a Metallic Heterostructure for Efficient Overall Water Splitting at Large Current Density

Large current-driven alkaline water splitting for large-scale hydrogen production generally suffers from the sluggish charge transfer kinetics. Commercial noble-metal catalysts are unstable in large-current operation, while most non-noble metal catalysts can only achieve high activity at low current densities <200 mA cm^-2 , far lower than industrially-required current densities (>500 mA cm^-2 ). Herein, a sulfide-based metallic heterostructure is designed to meet the industrial demand by regulating the electronic structure of phase transition coupling with interfacial defects from Mo and Ni incorporation. The modulation of metallic Mo₂ S₃ and in situ epitaxial growth of bifunctional Ni-based catalyst to construct metallic heterostructure can facilitate the charge transfer for fast Volmer H and Heyrovsky H₂ generation. The Mo₂ S₃ @NiMo₃ S₄ electrolyzer requires an ultralow voltage of 1.672 V at a large current density of 1000 mA cm^-2 , with ≈100% retention over 100 h, outperforming the commercial RuO₂ ||Pt/C, owing to the synergistic effect of the phase and interface electronic modulation. This work sheds light on the design of metallic heterostructure with an optimized interfacial electronic structure and abundant active sites for industrial water splitting.

Metal-Organic Framework-Derived Three-Dimensional Macropore Nitrogen-Doped Carbon Frameworks Decorated with Ultrafine Ru-Based Nanoparticles for Overall Water Splitting

Hydrogen energy with the advantages of green, sustainability, and high energy density has been considered as an alternative to fossil fuel energy. Water electrolysis to produce hydrogen is a promising energy conversion technology but limited to the large overpotential; thus, a highly efficient electrocatalyst is urgently needed. Herein, Ru-based electrocatalysts including an ultrathin Ru/three-dimensional (3D) macropore N-doped carbon framework (Ru/3DMNC) and ultrathin RuO₂/3D macropore N-doped carbon framework (RuO₂/3DMNC) are first prepared using a Zn-centered metal-organic framework (MOF, ZIF-8) as the precursor. The ultrathin 3D macropore framework structure together with N doping endows the as-synthesized Ru-based electrocatalysts with abundant exposed catalytic active sites, good electroconductivity, and excellent electron/mass transport, accomplishing improved activities for hydrogen evolution reaction (HER), oxygen evolution reaction (OER), and overall water splitting. The Ru/3DMNC and RuO₂/3DMNC present low overpotentials of 50.96 and 216.74 mV to reach a current density of 10 mA cm^-2. Moreover, the overall water splitting device constructed by Ru/3DMNC and RuO₂/3DMNC as the cathode and anode catalysts, respectively, affords a current density of 10 mA cm^-2 only at 1.51 V, which is superior to the Pt/C||RuO₂ cell (1.573 V). This work provides a rational strategy to design and construct the efficient framework structure electrocatalysts for water splitting using MOFs as the precursor.

Strong Oxide-Support Interaction over IrO2 /V2 O5 for Efficient pH-Universal Water Splitting

Constructing strong oxide-support interaction (SOSI) is compelling for modulating the atomic configurations and electronic structures of supported catalysts. Herein, ultrafine iridium oxide nanoclusters (≈1 nm) are anchored on vanadium oxide support (IrO2 /V2 O5 ) via SOSI. The as made catalyst, with a unique distorted IrO2 structure, is discovered to significantly boost the performance for pH-universal oxygen evolution reaction (OER). Based on experimental results and theoretical calculations, the distorted IrO2 active sites with flexible redox states in IrO2 /V2 O5 server as electrophilic centers balance the adsorption of oxo-intermediates and effectively facilitate the process of OO coupling, eventually propelling the fast turnover of water oxidation. As a result, IrO2 /V2 O5 demonstrates not only ultralow overpotentials at 10 mA cm-2 (266 mV, pH = 0; 329 mV, pH = 7; 283 mV, pH = 14) for OER, but also high-performance overall water electrolysis over a broad pH range, with a potential of mere 1.50 V (pH = 0), 1.65 V (pH = 7) or 1.49 V (pH = 14) at 10 mA cm-2 . In addition, SOSI can simultaneously secure the distorted active sites and thus remarkably improving the catalytic stability, making it a promising strategy to develop high-performance catalytic systems.

2D graphdiyne: an emerging carbon material

As a new member of carbon allotropes, graphdiyne (GDY) has the characteristics of being one-atom-thick with two-dimensional layers comprising sp and sp² hybridized carbon atoms, and represents a trend in the development of carbon materials. Its unique chemical and electronic structures give GDY many unique and fascinating properties such as rich chemical bonds, highly conjugated and super-large π structures, infinitely distributed pores and high inhomogeneity of charge distribution. GDY has entered a period of rapid development, especially with the significant emergence of fundamental research and applied research achievements over the past five years. As one of the frontiers of chemistry and materials science, graphdiyne was listed in the Top 10 research areas in the 2020 Research Frontiers report and was jointly released in the Top 10 in the world by Clarivate and the Chinese Academy of Sciences. The research results have shown the great potential of GDY in the applications of energy, catalysis, environmental science, electronic devices, detectors, biomedicine and therapy, etc. Scientists are eager to explore and fully reveal the new properties, discover new scientific concepts and phenomena, discover the new conversion modes and mechanisms of GDY in photoelectricity, energy, and catalysis, etc., and build the important scientific value of new conversion devices. This review covers research on the foundation and application of GDY, such as the controlled preparation of new methods of GDY and GDY-based materials, studies on new mechanisms and properties in chemistry and physics, and the foundation and applications in energy, catalysis, photoelectric and devices.

Facile Synthesis of Microporous Carbons from Biomass Waste as High Performance Supports for Dehydrogenation of Formic Acid

Formic acid (FA) is found to be a potential candidate for the storage of hydrogen. For dehydrogenation of FA, the supports of our catalysts were acquired by conducting ZnCl₂ treatment and carbonation for biomass waste. The texture and surface properties significantly affected the size and dispersion of Pd and its interaction with the support so as to cause the superior catalytic performance of catalysts. Microporous carbon obtained by carbonization of ZnCl₂ activated peanut shells (C_PS-ZnCl₂) possessing surface areas of 629 m²·g⁻¹ and a micropore rate of 73.5%. For ZnCl₂ activated melon seed (C_MS-ZnCl₂), the surface area and micropore rate increased to 1081 m²·g⁻¹ and 80.0%, respectively. In addition, the introduction of ZnCl₂ also caused the increase in surface O content and reduced the acidity of the catalyst. The results represented that C_MS-ZnCl₂ with uniform honeycomb morphology displayed the best properties, and the as-prepared Pd/C_MS-ZnCl₂ catalyst afforded 100% hydrogen selectivity as well as excellent catalytic activity with an initial high turnover number (TON) value of 28.3 at 30 °C and 100.1 at 60 °C.