Boosting Nitrogen Reduction to Ammonia on FeN4 Sites by Atomic Spin Regulation

Advancing electrocatalytic reactions through mapping key intermediates to active sites via descriptors

Descriptors play a crucial role in electrocatalysis as they can provide valuable insights into the electrochemical performance of energy conversion and storage processes. They allow for the understanding of different catalytic activities and enable the prediction of better catalysts without relying on the time-consuming trial-and-error approaches. Hence, this comprehensive review focuses on highlighting the significant advancements in commonly used descriptors for critical electrocatalytic reactions. First, the fundamental reaction processes and key intermediates involved in several electrocatalytic reactions are summarized. Subsequently, three types of descriptors are classified and introduced based on different reactions and catalysts. These include d-band center descriptors, readily accessible intrinsic property descriptors, and spin-related descriptors, all of which contribute to a profound understanding of catalytic behavior. Furthermore, multi-type descriptors that collectively determine the catalytic performance are also summarized. Finally, we discuss the future of descriptors, envisioning their potential to integrate multiple factors, broaden application scopes, and synergize with artificial intelligence for more efficient catalyst design and discovery.

Linking atomic to mesoscopic scales in multilevel structural tailoring of single-atom catalysts for peroxide activation

A key challenge in designing single-atom catalysts (SACs) with multiple and synergistic functions is to optimize their structure across different scales, as each scale determines specific material properties. We advance the concept of a comprehensive optimization of SACs across different levels of scale, from atomic, microscopic to mesoscopic scales, based on interfacial kinetics control on the coupled metal-dissolution/polymer-growth process in SAC synthesis. This approach enables us to manipulate the multilevel interior morphologies of SACs, such as highly porous, hollow, and double-shelled structures, as well as the exterior morphologies inherited from the metal oxide precursors. The atomic environment around the metal centers can be flexibly adjusted during the dynamic metal-oxide consumption and metal-polymer formation. We show the versatility of this approach using mono- or bi-metallic oxides to access SACs with rich microporosity, tunable mesoscopic structures and atomic coordinating compositions of oxygen and nitrogen in the first coordination-shell. The structures at each level collectively optimize the electronic and geometric structure of the exposed single-atom sites and lower the surface *O formation barriers for efficient and selective peroxidase-type reaction. The unique spatial geometric configuration of the edge-hosted active centers further improves substrate accessibility and substrate-to-catalyst hydrogen overflow due to tunable structural heterogeneity at mesoscopic scales. This strategy opens up new possibilities for engineering more multilevel structures and offers a unique and comprehensive perspective on the design principles of SACs.

Electronegative Phosphorus-Integrated Co2+ Active Sites for Enhanced Electrocatalytic Nitrogen Reduction

In the quest for proficient electrocatalysts for ammonia's electrocatalytic nitrogen reduction, cobalt oxides, endowed with a rich d-electron reservoir, have emerged as frontrunners. Despite the previously evidenced prowess of CoO in this realm, its ammonia yield witnesses a pronounced decline as the reaction unfolds, a phenomenon linked to the electron attrition from its Co2+ active sites during electrocatalytic nitrogen reduction reaction (ENRR). To counteract this vulnerability, we harnessed electron-laden phosphorus (P) elements as dopants, aiming to recalibrate the electronic equilibrium of the pivotal Co active site, thereby bolstering both its catalytic performance and stability. Our empirical endeavors showcased the doped P-CoO's superior credentials: it delivered an impressive ammonia yield of 49.6 and, notably, a Faradaic efficiency (FE) of 9.6% at -0.2 V versus RHE, markedly eclipsing its undoped counterpart. Probing deeper, a suite of ex-situ techniques, complemented by rigorous theoretical evaluations, was deployed. This dual-pronged analysis unequivocally revealed CoO's propensity for an electron-driven valence metamorphosis to Co3+ post-ENRR. In stark contrast, P-CoO, fortified by P doping, exhibits a discernibly augmented ammonia yield. Crucially, P's intrinsic ability to staunch electron leakage from the active locus during ENRR ensures the preservation of the valence state, culminating in enhanced catalytic dynamism and fortitude. This investigation not only illuminates the intricacies of active site electronic modulation in ENRR but also charts a navigational beacon for further enhancements in this domain.

Research progress of dual-atom site catalysts for photocatalysis

Dual-atom site catalysts (DASCs) have sparked considerable interest in heterogeneous photocatalysis as they possess the advantages of excellent photoelectronic activity, photostability, and high carrier separation efficiency and mobility. The DASCs involved in these important photocatalytic processes, especially in the photocatalytic hydrogen evolution reaction (HER), CO2 reduction reaction (CO2RR), N2/nitrate reduction, etc., have been extensively investigated in the past few years. In this review, we highlight the recent progress in DASCs that provides fundamental insights into the photocatalytic conversion of small molecules. The controllable preparation and characterization methods of various DASCs are discussed. Subsequently, the reaction mechanisms of the formation of several important molecules (hydrogen, hydrocarbons and ammonia) on DASCs are introduced in detail, in order to probe the relationship between DASCs's structure and photocatalytic activity. Finally, some challenges and outlooks of DASCs in the photocatalytic conversion of small molecules are summarized and prospected. We hope that this review can provide guidance for in-depth understanding and aid in the design of efficient DASCs for photocatalysis.

Structural engineering of atomic catalysts for electrocatalysis

As a burgeoning category of heterogeneous catalysts, atomic catalysts have been extensively researched in the field of electrocatalysis. To satisfy different electrocatalytic reactions, single-atom catalysts (SACs), diatomic catalysts (DACs) and triatomic catalysts (TACs) have been successfully designed and synthesized, in which microenvironment structure regulation is the core to achieve high-efficiency catalytic activity and selectivity. In this review, the effect of the geometric and electronic structure of metal active centers on catalytic performance is systematically introduced, including substrates, central metal atoms, and the coordination environment. Then theoretical understanding of atomic catalysts for electrocatalysis is innovatively discussed, including synergistic effects, defect coupled spin state change and crystal field distortion spin state change. In addition, we propose the challenges to optimize atomic catalysts for electrocatalysis applications, including controlled synthesis, increasing the density of active sites, enhancing intrinsic activity, and improving the stability. Moreover, the structure-function relationships of atomic catalysts in the CO2 reduction reaction, nitrogen reduction reaction, oxygen reduction reaction, hydrogen evolution reaction, and oxygen evolution reaction are highlighted. To facilitate the development of high-performance atomic catalysts, several technical challenges and research orientations are put forward.

Ambient Electrochemical Ammonia Synthesis: From Theoretical Guidance to Catalyst Design

Ammonia, a vital component in the synthesis of fertilizers, plastics, and explosives, is traditionally produced via the energy-intensive and environmentally detrimental Haber-Bosch process. Given its considerable energy consumption and significant greenhouse gas emissions, there is a growing shift toward electrocatalytic ammonia synthesis as an eco-friendly alternative. However, developing efficient electrocatalysts capable of achieving high selectivity, Faraday efficiency, and yield under ambient conditions remains a significant challenge. This review delves into the decades-long research into electrocatalytic ammonia synthesis, highlighting the evolution of fundamental principles, theoretical descriptors, and reaction mechanisms. An in-depth analysis of the nitrogen reduction reaction (NRR) and nitrate reduction reaction (NitRR) is provided, with a focus on their electrocatalysts. Additionally, the theories behind electrocatalyst design for ammonia synthesis are examined, including the Gibbs free energy approach, Sabatier principle, d-band center theory, and orbital spin states. The review culminates in a comprehensive overview of the current challenges and prospective future directions in electrocatalyst development for NRR and NitRR, paving the way for more sustainable methods of ammonia production.

Efficient and Rapid Hydrogen Extraction from Ammonia-Water via Laser Under Ambient Conditions without Catalyst

As a good carrier of hydrogen, ammonia-water has been employed to extract hydrogen in many ways. Here, we demonstrate a simple, green, ultrafast, and highly efficient method for hydrogen extraction from ammonia-water by laser bubbling in liquids (LBL) at room temperature and ambient pressure without catalyst. A maximum apparent yield of 33.7 mmol/h and a real yield of 93.6 mol/h were realized in a small operating space, which were far higher than the yields of most hydrogen evolution reactions from ammonia-water under ambient conditions. We also established that laser-induced cavitation bubbles generated a transient high temperature, which enabled a very suitable environment for hydrogen extraction from ammonia-water. The laser used here can serve as a demonstration of potentially solar-pumped catalyst-free hydrogen extraction and other chemical synthesis. We anticipate that the LBL technique will open unprecedented opportunities to produce chemicals.

Electronic Perturbation of Isolated Fe Coordination Structure for Enhanced Nitrogen Fixation

Modulation of the local electronic structure of isolated coordination structures plays a critical role in electrocatalysis yet remains a grand challenge. Herein, we have achieved electron perturbation for the isolated iron coordination structure via tuning the iron spin state from a high spin state (FeN4) to a medium state (FeN2B2). The transition of spin polarization facilitates electron penetration into the antibonding π orbitals of nitrogen and effectively activates nitrogen molecules, thereby achieving an ammonia yield of 115 μg h-1 mg-1cat. and a Faradaic efficiency of 24.8%. In situ spectroscopic studies and theoretical calculations indicate that boron coordinate sites, as electron acceptors, can regulate the adsorption energy of NxHy intermediates on the Fe center. FeN2B2 sites favor the NNH* intermediate formation and reduce the energy barrier of rate-determining steps, thus accounting for excellent nitrogen fixation performance. Our strategy provides an effective approach for designing efficient electrocatalysts via precise electronic perturbation.

Oxygen vacancy modulation in interfacial engineering Fe3O4 over carbon nanofiber boosting ambient electrocatalytic N2 reduction

The oxygen vacancy modulation of interface-engineered Fe3O4 nanograins over carbon nanofiber (Fe@CNF) was achieved to improve electrocatalytic nitrogen reduction reaction (NRR) activity and stability via facile electrospinning and tuning thermal procedure. The optimal catalyst calcined at 800 ℃ (Fe@CNF-800) was endowed with abundant nanograin boundaries and optimized oxygen vacancy (Vo) concentration of iron oxides, thereby affording 37.1 μg h-1 mgcat.-1 (-0.2 V vs. reversible hydrogen electrode (RHE)) NH3 yield and rational Faraday efficiency (10.2%), with 13.6 times atomic activity enhancement compared to of that commercial Fe3O4. The interfacial effect of assembled nanograins in particles correlated with the formation of Vo and more intrinsic active sites, which is conducive to the trapping and activation of nitrogen (N2). The in-situ X-ray photoelectron spectroscopy (XPS) measurement revealed the real consumption of adsorbed oxygen when introducing N2 by the trapping effect of Vo. Density-Functional-Theory (DFT) calculation validates the promotive hydrogenation effect and elimination of hydrogen intermediate (H*) interacted with N2 transferring toward oxygen of the support. The optimal catalyst shows a lasting NRR activity at least 90 h, outperforming most reported Fe-based NRR catalysts.

Developing a class of dual atom materials for multifunctional catalytic reactions

Dual atom catalysts, bridging single atom and metal/alloy nanoparticle catalysts, offer more opportunities to enhance the kinetics and multifunctional performance of oxygen reduction/evolution and hydrogen evolution reactions. However, the rational design of efficient multifunctional dual atom catalysts remains a blind area and is challenging. In this study, we achieved controllable regulation from Co nanoparticles to CoN4 single atoms to Co2N5 dual atoms using an atomization and sintering strategy via an N-stripping and thermal-migrating process. More importantly, this strategy could be extended to the fabrication of 22 distinct dual atom catalysts. In particular, the Co2N5 dual atom with tailored spin states could achieve ideally balanced adsorption/desorption of intermediates, thus realizing superior multifunctional activity. In addition, it endows Zn-air batteries with long-term stability for 800 h, allows water splitting to continuously operate for 1000 h, and can enable solar-powered water splitting systems with uninterrupted large-scale hydrogen production throughout day and night. This universal and scalable strategy provides opportunities for the controlled design of efficient multifunctional dual atom catalysts in energy conversion technologies.

Enhancing reductive C-N coupling of nitrocompounds through interfacial engineering of MoO2 in thin carbon layers

In this study, we developed an approach by coating silica nanospheres with polydopamine and metal precursor, followed by carbonization to create interfacial engineered MoO2. The presence of numerous crystal interfaces and metal-carbon interactions resulted in a remarkable enhancement of C-N coupling activity and stability of catalyst compared to one obtained by air calcination.

Ti-doped iron phosphide nanoarrays grown on carbon cloth as a self-supported electrode for enhanced electrocatalytic nitrogen reduction

The electrocatalytic nitrogen reduction reaction (eNRR) has been widely recognized as a promising method for green ammonia synthesis. However, the inert NN bond, inferior catalytic activity and small electrochemically active area impede its practical application. To circumvent these problems, we proposed self-supported Ti-doped iron phosphide (FeP) nanorod arrays grown on carbon cloth (Ti-FeP/CC) as an electrode for eNRR. The introduction of Ti doping sites regulated the electron structure of FeP, leading to electron migration from Fe to P, which facilitated N2-to-NH3 conversion. The as-prepared Ti-FeP/CC showed an enhancement of electrochemical surface area (ECSA), high electrical conductivity and well-exposed active sites. Ti-FeP/CC was capable of producing a high NH3 yield of 10.93 μg h-1 cm-2 and faradaic efficiency of 10.77% at an optimal voltage of -0.3 V (vs. RHE) in a 0.1 M Na2SO4 solution with excellent stability and durability during the eNRR process. This work not only presents a promising electrode material for eNRR, but also provides a new insight into rational heteroatom doping for electrocatalysis.

Spin state modulation on dual Fe center by adjacent Ni sites enabling the boosted activities and ultra-long stability in Zn-air batteries

Breakthrough in developing cost-effective Fe-based catalysts with superior oxygen reduction reaction (ORR) activities and ultra-long-term stability for application in Zn-air batteries (ZABs) remain a priority but still full of challenges. Herein, the neighboring NiN4 single-metal-atom and Fe2N5 dual-metal-atoms on the N-doped hollow carbon sphere (Fe/Ni-NHCS) were deliberately constructed as the efficient and robust ORR catalyst for ZABs. Both theory calculations and magnetic measurements demonstrate that the introduction of NiN4 provides a significant role on optimizing the electron spin state of Fe2N5 sites and reducing the energy barrier for the adsorption and conversion of the oxygen-containing intermediates, enabling the Fe/Ni-NHCS with excellent ORR performance and ultralow byproduct HO2- yield (0.5%). Impressively, the ZABs driven by Fe/Ni-NHCS exhibit unprecedented long-term rechargeable stability over 1200 h. This work paves a new venue to manipulate the spin state of active sites for simultaneously achieving superior catalytic activities and ultra-long-term stability in energy conversion technologies.

Efficient C-N coupling in the direct synthesis of urea from CO2 and N2 by amorphous SbxBi1-xOy clusters

Although direct generation of high-value complex molecules and feedstock by coupling of ubiquitous small molecules such as CO2 and N2 holds great appeal as a potential alternative to current fossil-fuel technologies, suitable scalable and efficient catalysts to this end are not currently available as yet to be designed and developed. To this end, here we prepare and characterize SbxBi1-xOy clusters for direct urea synthesis from CO2 and N2 via C-N coupling. The introduction of Sb in the amorphous BiOx clusters changes the adsorption geometry of CO2 on the catalyst from O-connected to C-connected, creating the possibility for the formation of complex products such as urea. The modulated Bi(II) sites can effectively inject electrons into N2, promoting C-N coupling by advantageous modification of the symmetry for the frontier orbitals of CO2 and N2 involved in the rate-determining catalytic step. Compared with BiOx, SbxBi1-xOy clusters result in a lower reaction potential of only -0.3 V vs. RHE, an increased production yield of 307.97 μg h-1 mg-1cat, and a higher Faraday efficiency (10.9%), pointing to the present system as one of the best catalysts for urea synthesis in aqueous systems among those reported so far. Beyond the urea synthesis, the present results introduce and demonstrate unique strategies to modulate the electronic states of main group p-metals toward their use as effective catalysts for multistep electroreduction reactions requiring C-N coupling.

A First-Principles Study of Regulating Spin States of MoSi2N4 Supported Single-Atom Catalysts Via Doping Strategy for Enhancing Electrochemical Nitrogen Fixation Activity

Regulating the spin states of catalysts to enhance activity is fascinating but challenging. Herein, by using first-principles calculations, single transition-metal (TM) atoms Mo, Re, and Os embedded in nitrogen vacancy of the MoSi2N4 monolayer (TM1/VN-MoSi2N4) were screened out as potential catalysts for electrochemical nitrogen reduction reaction to ammonia. Our findings suggest that the spin states of these active centers can be precisely and gradually tuned through a simple doping strategy. Additionally, doping one O atom into the Mo1/VN-MoSi2N4 system as an example significantly improves catalytic activity. The spin state of Mo1 transitions from high to intermediate while simultaneously breaking the C3v symmetry of the supported atom. These factors synergistically lead to better orbital overlap between the catalyst and intermediates, facilitating subsequent protonation processes and overall catalytic activity. This work provides novel insight into designing, precisely controlling, and revisiting the spin-related catalytic performance in heterogeneous catalysis.

Hydrophobicity Tailoring of Ferric Covalent Organic Framework/MXene Nanosheets for High-Efficiency Nitrogen Electroreduction to Ammonia

Electrocatalytic nitrogen reduction reaction (NRR) represents a promising sustainable approach for NH₃ synthesis. However, the poor NRR performance of electrocatalysts is a great challenge at this stage, mainly owing to their low activity and the competitive hydrogen evolution reaction (HER). Herein, 2D ferric covalent organic framework/MXene (COF-Fe/MXene) nanosheets with controllable hydrophobic behaviors are successfully prepared via a multiple-in-one synthetic strategy. The boosting hydrophobicity of COF-Fe/MXene can effectively repel water molecules to inhibit the HER for enhanced NRR performances. By virtue of the ultrathin nanostructure, well-defined single Fe sites, nitrogen enrichment effect, and high hydrophobicity, the 1H,1H,2H,2H-perfluorodecanethiol modified COF-Fe/MXene hybrid shows a NH₃ yield of 41.8 µg h^-1 mg_cat. ^-1 and a Faradaic efficiency of 43.1% at -0.5 V versus RHE in a 0.1 m Na₂ SO₄ water solution, which are vastly superior to the known Fe-based catalysts and even to the noble metal catalysts. This work provides a universal strategy to design and synthesis of non-precious metal electrocatalysts for high-efficiency N₂ reduction to NH₃ .

Improved Electronic Structure from Spin-State Reconstruction of a Heteronuclear Fe-Co Diatomic Pair to Boost the Fenton-like Reaction

Dual-atom catalysts (DACs) are promising candidates for various catalytic reactions, including electrocatalysis, chemical synthesis, and environmental remediation. However, the high-activity origin and mechanism underlying intrinsic activity enhancement remain elusive, especially for the Fenton-like reaction. Herein, we systematically compared the catalytic performance of dual-atom FeCo-N/C with its single-atom counterparts by activating peroxymonosulfate (PMS) for pollutant abatement. The unusual spin-state reconstruction on FeCo-N/C is demonstrated to effectively improve the electronic structure of Fe and Co in the d orbital and enhance the PMS activation efficiency. Accordingly, the dual-atom FeCo-N/C with an intermediate-spin state remarkably boosts the Fenton-like reaction by almost 1 order of magnitude compared with low-spin Co-N/C and high-spin Fe-N/C. Moreover, the established dual-atom-activated PMS system also exhibits excellent stability and robust resistance against harsh conditions. Combined theoretical calculations reveal that unlike unitary Co atom or Fe atom transferring electrons to the PMS molecule, the Fe atom of FeCo-N/C provides extra electrons to the neighboring Co atom and positively shifts the d band of the Co center, thereby optimizing the PMS adsorption and decomposition into a unique high-valent Fe^IV-O-Co^IV species via a low-energy barrier pathway. This work advances a conceptually novel mechanistic understanding of the enhanced catalytic activity of DACs in Fenton-like reactions and helps to expand the application of DACs in various catalytic reactions.

Asymmetric Coordination Environment Engineering of Atomic Catalysts for CO2 Reduction

Single-atom catalysts (SACs) have emerged as well-known catalysts in renewable energy storage and conversion systems. Several supports have been developed for stabilizing single-atom catalytic sites, e.g., organic-, metal-, and carbonaceous matrices. Noticeably, the metal species and their local atomic coordination environments have a strong influence on the electrocatalytic capabilities of metal atom active centers. In particular, asymmetric atom electrocatalysts exhibit unique properties and an unexpected carbon dioxide reduction reaction (CO₂RR) performance different from those of traditional metal-N₄ sites. This review summarizes the recent development of asymmetric atom sites for the CO₂RR with emphasis on the coordination structure regulation strategies and their effects on CO₂RR performance. Ultimately, several scientific possibilities are proffered with the aim of further expanding and deepening the advancement of asymmetric atom electrocatalysts for the CO₂RR.

Manipulating the Spin State of Fe Sites via Fe-O-Si Bridge Bonds for Enhanced Polysulfide Redox Kinetics in the Li-S Battery

Transition metals with 3d unoccupied orbitals have superior catalytic activity, but inherent high spin suppresses their adsorption capability, leading to sluggish polysulfide conversion kinetics for Li-S batteries. Herein, we provide Fe-O-Si bridge bonds to manipulate e_g filling and induce a high-to-medium spin transition of Fe³⁺ sites, which enhances polysulfide adsorption and facilitates sulfur redox reaction kinetics. The resultant cathodes exhibit outstanding performances under high sulfur loading, which can deliver a high battery specific energy of 1061 mA h·g^-1 even after 100 cycles in Li-S pouch batteries. This work provides new insights into the kinetic and multi-step conversion mechanism of the sulfur redox reaction process, helping in the understanding and design of spin-dependent catalysts.

Emerging single-atom iron catalysts for advanced catalytic systems

Due to the elusive structure-function relationship, traditional nanocatalysts always yield limited catalytic activity and selectivity, making them practically difficult to replace natural enzymes in wide industrial and biomedical applications. Accordingly, single-atom catalysts (SACs), defined as catalysts containing atomically dispersed active sites on a support material, strikingly show the highest atomic utilization and drastically boosted catalytic performances to functionally mimic or even outperform natural enzymes. The molecular characteristics of SACs (e.g., unique metal-support interactions and precisely located metal sites), especially single-atom iron catalysts (Fe-SACs) that have a similar catalytic structure to the catalytically active center of metalloprotease, enable the accurate identification of active centers in catalytic reactions, which afford ample opportunity for unraveling the structure-function relationship of Fe-SACs. In this review, we present an overview of the recent advances of support materials for anchoring an atomic dispersion of Fe. Subsequently, we highlight the structural designability of support materials as two sides of the same coin. Moreover, the applications described herein illustrate the utility of Fe-SACs in a broad scope of industrially and biologically important reactions. Finally, we present an outlook of the major challenges and opportunities remaining for the successful combination of single Fe atoms and catalysts.

Volcano-type relationship between oxidation states and catalytic activity of single-atom catalysts towards hydrogen evolution

To date, the effect of oxidation state on activity remains controversial in whether higher or lower oxidation states benefit the enhancement of catalytic activity. Herein, we discover a volcanic relationship between oxidation state and hydrogen evolution reaction activity based on Os single-atom catalysts. Firstly, a series of Os SACs with oxidation states ranging from  + 0.9 to  + 2.9 are synthesized via modifying the coordination environments, including Os-N₃S₁, Os-N₄, Os-S₆, Os-C₃, and Os-C₄S₂. A volcano-type relation between oxidation states and hydrogen evolution activity emerge with a summit at a moderate experimental oxidation state of  + 1.3 (Os-N₃S₁). Mechanism studies illustrate that with increasing oxidation states, the adsorption of H atoms on Os is strengthened due to increased energy level and decreased occupancy of anti-bonding states of Os-H bond until the anti-bonding states become empty. Further increasing the oxidation states weakens hydrogen adsorption because of the decreased occupancy of Os-H bonding states. In this work, we emphasize the essential role of oxidation state in manipulating activity, which offers insightful guidance for the rational design of single-atom catalysts.

While single atom catalysis offers high efficiency for materials use, different possible atomic configurations yield differing activities. Here, authors modulate single-atom Os coordinations to show a volcano relationship between oxidation state and H₂ evolution electrocatalytic activities.

Electron spin modulation engineering in oxygen-involved electrocatalysis

Electrocatalytic oxygen reduction reaction (ORR) and oxygen evolution reduction (OER) are regarded as the key reactions via the sustainable system (fuel cell and water splitting), respectively. In OER, the transition from singlet oxygen species to triplet oxygen molecules is involved, meanwhile the ORR involves the transition from triplet oxygen molecules to singlet oxygen species. However, in these processes, the number of unpaired electrons is not conserved, which is not thermodynamically favorable and creates an additional energy barrier. Fortunately, regulating the electrocatalysis by spin-state modulation enables a unique effect on the catalytic performance, but the current understanding on spin-state engineering for electro-catalyzing ORR and OER is still insufficient. Herein, this review summarized the in-spin engineering for the state-of-the-art ORR and OER electrocatalysts. It began by introducing engineering of spin-state to e_gfilling for ORR and OER process, and then moved to spin polarization and spin-pinning effect for OER process. Various designed strategies focusing on how to regulate the spin-state of the active center have been summarized up. The connectivity of the structures of typical ORR (e.g. metal-nitrogen-carbon) and OER (e.g. design strategies oxides, metal organic frameworks) catalysts depending on the spin level is also discussed. Finally, we present the outlook from the aspects of template catalysts, characterization methods, regulation strategies, theoretical calculations, which will further expand the possibility of better electrocatalytic performance through spin-state modulation. This review concluded some open suggestions and prospects, which are worthy of the community's future work.