Sulfur Vacancy and Ti3 C2 Tx Cocatalyst Synergistically Boosting Interfacial Charge Transfer in 2D/2D Ti3 C2 Tx /ZnIn2 S4 Heterostructure for Enhanced Photocatalytic Hydrogen Evolution

Structurally disordered MoSe2 with rich 1T phase as a universal platform for enhanced photocatalytic hydrogen production

The improvement of surface reactivity in noble-metal-free cocatalysts is crucial for the development of efficient and cost-effective photocatalytic systems. However, the influence of crystallinity on catalytic efficacy has received limited attention. Herein, we report the utilization of structurally disordered MoSe2 with abundant 1T phase as a versatile cocatalyst for photocatalytic hydrogen evolution. Using MoSe2/carbon nitride (CN) hybrids as a case study, it is demonstrated that amorphous MoSe2 significantly enhances the hydrogen evolution rate of CN, achieving up to 11.37 μmol h-1, surpassing both low crystallinity (8.24 μmol h-1) and high crystallinity MoSe2 (3.86 μmol h-1). Experimental analysis indicates that the disordered structure of amorphous MoSe2, characterized by coordination-unsaturated surface sites and a rich 1T phase with abundant active sites at the basal plane, predominantly facilitates the conversion of surface-bound protons to hydrogen. Conversely, the heightened charge transfer capacity of the highly crystalline counterpart plays a minor role in enhancing practical catalytic performance. This approach is applicable for enhancing the photocatalytic hydrogen evolution performance of various semiconducting photocatalysts, including CdS, TiO2, and ZnIn2S4, thereby offering novel insights into the advancement of high-performance non-precious catalysts through phase engineering.

Dual-Vacancy-Engineered ZnIn2S4 Nanosheets for Harnessing Low-Frequency Vibration Induced Piezoelectric Polarization Coupled with Static Dipole Field to Enhance Photocatalytic H2 Evolution

This study investigates the impact of In- and S-vacancy concentrations on the photocatalytic activity of non-centrosymmetric zinc indium sulfide (ZIS) nanosheets for the hydrogen evolution reaction (HER). A positive correlation between the concentrations of dual In and S vacancies and the photocatalytic HER rate over ZIS nanosheets is observed. The piezoelectric polarization, stimulated by low-frequency vortex vibration to ensure the well-dispersion of ZIS nanosheets in solution, plays a crucial role in enhancing photocatalytic HER over the dual-vacancy engineered ZIS nanosheets. The piezoelectric characteristic of the defective ZIS nanosheets is confirmed through the piezopotential response measured using piezoelectric force microscopy. Piezophotocatalytic H2 evolution over the ZIS nanosheets is boosted under accelerated vortex vibrations. The research explores how vacancies alter ZIS's dipole moment and piezoelectric properties, thereby increasing electric potential gradient and improving charge-separation efficiency, through multi-scale simulations, including Density Functional Theory and Finite Element Analysis, and a machine-learning interatomic potential for defect identification. Increased In and S vacancies lead to higher electric potential gradients in ZIS along [100] and [010] directions, attributing to dipole moment and the piezoelectric effect. This research provides a comprehensive exploration of vacancy engineering in ZIS nanosheets, leveraging the piezopotential and dipole field to enhance photocatalytic performances.

Local polarization redistribution in ZnmIn2S3+m for the enhancing synergetic piezo-photocatalytic overall water splitting

Piezo-photocatalytic water (deuterium oxide) decomposition is a promising strategy for realizing renewable energy, but the manipulation of the polar center remains a big challenge. This study uses a simple low-temperature hydrothermal process to successfully manufacture ZnmIn2Sm+3 (m = 1-3) (ZnIn2S4, Zn2In2S5 and Zn3In2S6). Incorporating both experimental and theoretical analyses, the structural contraction and local polarization of the Zn-S bond in Zn2In2S5 enhance the piezoelectric response and surface charge accumulation, which facilitate charge transfer and reduce the activation energy of water. Remarkably, Zn2In2S5 exhibits excellent piezoelectric photocatalytic total water splitting performance (H2/O2: 4284.72/1967.00 μmol g-1h-1), which is 1.77 times that of photocatalytic performance. Moreover, a significant enhancement in D2O splitting performance can be obtained for the optimized Zn2In2S5. Our work offers valuable insights into the disclosure of local polarization in catalysts for enhancing piezo-photocatalytic overall water splitting.

Construction of 2D/2D ZnIn2S4/Nb2CTx (MXene) hybrid with hole transport highway and active facet exposure boost photocatalytic hydrogen evolution

In this study, leveraging the tunable surface groups of MXene, the two-dimensional (2D) Nb2CTx with OH terminal (NC) was synthesized. 2D ZnIn2S4 (ZIS) nanosheets were prepared with the aid of sodium citrate, enhancing the exposure ratio of active (110) facet. On this basis, 2D/2D ZnIn2S4/Nb2CTx heterojunctions were fabricated to improve photocatalytic hydrogen evolution reaction (HER) performance. The optimized 6 wt%Nb2CTx/ZnIn2S4-450 (6NC/ZIS-450) photocatalyt exhibits a remarkable HER rate of 3603 μmol g-1h-1, which is 10 times superior to that of the original ZnIn2S4. Its apparent quantum efficiency (AQE) at 380 nm reaches 14.9 %. Meanwhile, even after 5 rounds of HER, the activity of 2D/2D ZnIn2S4/Nb2CTx heterojunction remained at 90 %, far superior to that of pure ZnIn2S4 (34 % and 31 %). Energy band structure analysis and density functional theory (DFT) calculation indicate that Nb2CTx adsorbed with OH exhibit a low work function. By serving as a hole cocatalyst, it effectively boosts the photocatalytic HER rate of ZnIn2S4/Nb2CTx heterojunction and inhibits the photocorrosion of ZnIn2S4. This unique insight, via hole transport highways and increased exposure of active facets, effectively enhances the activity and stability of sulfides photocatalysts.

In-Sb Covalent Bonds over Sb2Se3/In2Se3 Heterojunction for Enhanced Photoelectrochemical Water Splitting

Antimony selenide is a promising P-type photocatalyst, but it has a large number of deep energy level defects, leading to severe carrier recombination. The construction of a heterojunction is a common way to resolve this problem. However, the conventional heterojunction system inevitably introduces interface defects. Herein, we employ in situ synthesis to epitaxially grow In2Se3 nanosheets on Sb2Se3 nanorods and form In-Sb covalent interfacial bonds. This petal-shaped heterostructure reduced interface defects and enhanced the efficiency of carrier separation and transport. In this work, the photocurrent density in the proposed Sb2Se3/In2Se3 photocathode is 0.485 mA cm-2 at 0 VRHE, which is 30 times higher than that of pristine Sb2Se3 and it has prominent long-term stability for 24 h without obvious decay. The results reveal that the synergy of the bidirectional built-in electric field constructed between In2Se3 and Sb2Se3 and the solid In-Sb interfacial bonds together build a high-efficiency transport channel for the photogenerated carriers that display enhanced photoelectrochemical (PEC) water-splitting performance. This work provides efficient guidance for reducing interface defects via the in situ synthesis and construction of interfacial bonds.

Tuning Electrons Migration of Dual S Defects Mediated MoS2-x/ZnIn2S4-x Toward Highly Efficient Photocatalytic Hydrogen Production

Photocatalytic hydrogen production is a prevalent method for hydrogen synthesis. However, high recombination rate of photogenerated carriers and high activation energy barrier of H remain persistent challenge. Here, the two-step hydrothermal method is utilized to prepare dual S-defect mediated catalyst molybdenum sulfide/zinc indium sulfide (MSv/ZISv), which has high hydrogen production rate of 8.83 mmol g-1h-1 under simulated sunlight. The achieved rate is 21.91 times higher than pure ZnIn2S4 substrate. Defects in ZIS within MSv/ZISv modify the primitive electronic structure by creating defect state that retaining good reducing power, leading to the rapid separation of electron-hole pairs and the generation of additional photogenerated carriers. The internal electric field further enhances the migration toward to cocatalyst. Simultaneously, the defects introduced on the MoS2 cause electron rearrangement, leading to electron clustering on both S vacancies and edge S. Thereby MSv/ZISv exhibits the lowest activation energy barrier and |ΔGH*|. This work explores the division of synergies between different types of S defects, providing new insights into the coupling of defect engineering.

Induced dipole moments in amorphous ZnCdS catalysts facilitate photocatalytic H2 evolution

Amorphous semiconductors without perfect crystalline lattice structures are usually considered to be unfavorable for photocatalysis due to the presence of enriched trap states and defects. Here we demonstrate that breaking long-range atomic order in an amorphous ZnCdS photocatalyst can induce dipole moments and generate strong electric fields within the particles which facilitates charge separation and transfer. Loading 1 wt.% of low-cost Co-MoSx cocatalysts to the ZnCdS material increases the H2 evolution rate to 70.13 mmol g-1 h-1, which is over 5 times higher than its crystalline counterpart and is stable over the long-term up to 160 h. A flexible 20 cm × 20 cm Co-MoSx/ZnCdS film is prepared by a facile blade-coating technique and can generate numerous observable H2 bubbles under natural sunlight, exhibiting potential for scale-up solar H2 production.

Efficient spatial separation of charge carriers over Sv-ZnIn2S4/NH2-MIL-88B(Fe) S-scheme heterojunctions for enhanced photocatalytic H2 evolution and antibiotics removal performance

The exploration of highly efficient sunlight-assisted photocatalyst for photodegradation of organic contaminants or energy conversion is strongly encouraged. In this work, we designed a novel three-dimensional spindle-like Sv-ZIS@NMFe heterojunction made of amino functionalized NH2-MIL-88B(Fe) (NMFe) and ZnIn2S4 nanosheets with abundant sulfur vacancies (Sv-ZIS). The structural properties of NMFe materials, such as a clearly defined system of pores and cavities, were retained by the Sv-ZIS@NMFe composites. Additionally, the incorporation of sulfur vacancies, -NH2 functional groups, and well-matched energy level positions led to various synergistic effects that considerably enhanced internal electron transformation and migration, as well as improved adsorption performance. Consequently, under visible light irradiation, the optimized sample exhibited superior hydrogen production activity and tetracycline hydrochloride photodegradation performance. At last, density functional theory calculations was used to further elucidated the possible photoreactivity mechanism. This study demonstrates that the Sv-ZIS@NMFe heterojunction materials formed by ZnIn2S4 with suitable sulfur vacancies and amino functionalized Fe-MOFs have promising applications in photocatalysis.

Sulfur vacancy-enhanced In2S3-x hollow microtubes for photocatalytic Cr (VI) and tetracycline removal

Morphological regulation and defect engineering are efficient methods for photocatalytic technology by improving photon absorption and electron dissociation. Herein, In2S3-x hollow microtubes with S-vacancies (MIS) were fabricated via a simple solvothermal reaction using In-based metal-organic frameworks (In-MOFs) as a precursor. Experimental results demonstrate that the hollow structure and optimal S-vacancies can jointly accelerate the photocatalytic reaction, attributed to a larger specific surface area, more active sites, and faster electron transfer efficiency. The champion MIS(2) displayed significantly better photocatalytic activity for Cr(VI) reduction and tetracycline (TC) degradation. The Cr(VI) reduction rate by MIS(2) is 3.67 and 2.82 times higher than those of optimal In2S3 template-free (HIS(2)) and MIS(1) with poor S-vacancies, respectively. The removal efficiency of TC by MIS(2) is 1.37 and 1.15 times higher than those of HIS(2) and MIS(1). Further integration of MIS(2) with aerogel simplifies the recovery process significantly.

Defective ZnIn2S4 Nanosheets for Visible-Light and Sacrificial-Agent-Free H2O2 Photosynthesis via O2/H2O Redox

H2O2 photosynthesis has attracted great interest in harvesting and converting solar energy to chemical energy. Nevertheless, the high-efficiency process of H2O2 photosynthesis is driven by the low H2O2 productivity due to the recombination of photogenerated electron-hole pairs, especially in the absence of a sacrificial agent. In this work, we demonstrate that ultrathin ZnIn2S4 nanosheets with S vacancies (Sv-ZIS) can serve as highly efficient catalysts for H2O2 photosynthesis via O2/H2O redox. Mechanism studies confirm that Sv in ZIS can extend the lifetimes of photogenerated carriers and suppress their recombination, which triggers the O2 reduction and H2O oxidation to H2O2 through radical initiation. Theoretical calculations suggest that the formation of Sv can strongly change the coordination structure of ZIS, modulating the adsorption abilities to intermediates and avoiding the overoxidation of H2O to O2 during O2/H2O redox, synergistically promoting 2e- O2 reduction and 2e- H2O oxidation for ultrahigh H2O2 productivity. The optimal catalyst displays a H2O2 productivity of 1706.4 μmol g-1 h-1 under visible-light irradiation without a sacrificial agent, which is ∼29 times higher than that of pristine ZIS (59.4 μmol g-1 h-1) and even much higher than those of reported photocatalysts. Impressively, the apparent quantum efficiency is up to 9.9% at 420 nm, and the solar-to-chemical conversion efficiency reaches ∼0.81%, significantly higher than the value for natural synthetic plants (∼0.10%). This work provides a facile strategy to separate the photogenerated electron-hole pairs of ZIS for H2O2 photosynthesis, which may promote fundamental research on solar energy harvest and conversion.

The new method of ZnIn2S4 synthesis on the titania nanotubes substrate with enhanced stability and photoelectrochemical performance

In this work, ZnIn2S4 layers were obtained on fluorine doped tin oxide (FTO) glass and TiO2 nanotubes (TiO2NT) using a hydrothermal process as photoanodes for photoelectrochemical (PEC) water splitting. Then, samples were annealed and the effect of the annealing temperature was investigated. Optimization of the deposition process and annealing of ZnIn2S4 layers made it possible to obtain an FTO-based material generating a photocurrent of 1.2 mA cm-2 at 1.62 V vs. RHE in a neutral medium. In contrast, the highest photocurrent in the neutral electrolyte obtained for the TiO2NT-based photoanode reached 0.5 mA cm-2 at 1.62 V vs. RHE. In addition, the use of a strongly acidic electrolyte allowed the generated photocurrent by the TiO2NT-based photoanode to increase to 3.02 mA cm-2 at 0.31 V vs. RHE. Despite a weaker photoresponse in neutral electrolyte than the optimized FTO-based photoanode, the use of TiO2NT as a substrate allowed for a significant increase in the photoanode's operating time. After 2 h of illumination, the photocurrent response of the TiO2NT-based photoanode was 0.21 mA cm-2, which was 42% of the initial value. In contrast, the FTO-based photoanode after the same time generated a photocurrent of 0.02 mA cm-2 which was only 1% of the initial value. The results indicated that the use of TiO2 nanotubes as a substrate for ZnIn2S4 deposition increases the photoanode's long-term stability in photoelectrochemical water splitting. The proposed charge transfer mechanism suggested that the heterojunction between ZnIn2S4 and TiO2 played an important role in improving the stability of the material by supporting charge separation.

Defect and Donor Manipulated Highly Efficient Electron-Hole Separation in a 3D Nanoporous Schottky Heterojunction

Given the rapid recombination of photogenerated charge carriers and photocorrosion, transition metal sulfide photocatalysts usually suffer from modest photocatalytic performance. Herein, S-vacancy-rich ZnIn2S4 (VS-ZIS) nanosheets are integrated on 3D bicontinuous nitrogen-doped nanoporous graphene (N-npG), forming 3D heterostructures with well-fitted geometric configuration (VS-ZIS/N-npG) for highly efficient photocatalytic hydrogen production. The VS-ZIS/N-npG presents ultrafast interfacial photogenerated electrons captured by the S vacancies in VS-ZIS and holes neutralization behaviors by the extra free electrons in N-npG during photocatalysis, which are demonstrated by in situ XPS, femtosecond transient absorption (fs-TA) spectroscopy, and transient-state surface photovoltage (TS-SPV) spectra. The simulated interfacial charge rearrangement behaviors from DFT calculations also verify the separation tendency of photogenerated charge carriers. Thus, the optimized VS-ZIS/N-npG 3D hierarchical heterojunction with 1.0 wt % N-npG exhibits a comparably high hydrogen generation rate of 4222.4 μmol g-1 h-1, which is 5.6-fold higher than the bare VS-ZIS and 12.7-fold higher than the ZIS without S vacancies. This work sheds light on the rational design of photogenerated carrier transfer paths to facilitate charge separation and provides further hints for the design of hierarchical heterostructure photocatalysts.

Femtosecond Laser-Driven Phase Engineering of WS2 for Nano-Periodic Phase Patterning and Sub-ppm Ammonia Gas Sensing

Laser-driven phase transition of 2D transition metal dichalcogenides has attracted much attention due to its high flexibility and rapidity. However, there are some limitations during the laser irradiation process, especially the unsatisfied surface ablation, the inability of nanoscale phase patterning, and the unexploited physical properties of new phase. In this work, the well-controlled femtosecond (fs) laser-driven transformation from the metallic 2M-WS2 to the semiconducting 2H-WS2 is reported, which is confirmed to be a single-crystal to single-crystal transition without layer thinning or obvious ablation. Moreover, a highly ordered 2H/2M nano-periodic phase transition with a resolution of ≈435 nm is achieved, breaking through the existing size bottleneck of laser-driven phase transition, which is attributed to the selective deposition of plasmon energy induced by fs laser. It is also demonstrated that the achieved 2H-WS2 after laser irradiation contains rich sulfur vacancies, which exhibits highly competitive ammonia gas sensing performance, with a detection limit below 0.1 ppm and a fast response/recovery time of 43/67 s at room temperature. This study provides a new strategy for the preparation of the phase-selective transition homojunction and high-performance applications in electronics.

Increasing the Photocatalytic Hydrogen Generation Activity of CdS Nanorods by Introducing Interfacial and Polarization Electric Fields

Cadmium sulfide (CdS) is a photocatalyst widely used for efficient H2 production under visible light irradiation, due to its narrow bandgap and suitable conduction band position. However, the fast recombination of carriers results in their low utilization. In order to improve photocatalytic hydrogen production, it reports the successful introduction of metallic Cd and S vacancies on CdS nanorods (CdS NRs) by a facile in situ chemical reduction method, using a thermal treatment process. This procedure generates interfacial and polarization electric fields, that significantly improve the photocatalytic hydrogen production performance of CdS NRs in sodium sulfide and sodium sulfite aqueous solutions, under visible light irradiation (λ >420 nm). The introduction of these electric fields is believed to improve charge separation and facilitate faster interfacial charge migration, resulting in a significantly optimized catalyst, with a photocatalytic hydrogen evolution rate of up to 10.6 mmol-1  g-1  h-1 with apparent quantum efficiency (AQE) of 12.1% (420 nm), which is 8.5 times higher than that of CdS. This work provides a useful method to introduce metallic and S vacancies on metal sulfide photocatalysts to build local polarization and interfacial electric fields for high-performance photocatalytic H2 production.

Phosphorus-Doped Hollow Tubular g-C3N4 for Enhanced Photocatalytic CO2 Reduction

Photocatalytic CO2 reduction is a tactic for solving the environmental pollution caused by greenhouse gases. Herein, NH4H2PO4 was added as a phosphorus source in the process of the hydrothermal treatment of melamine for the first time, and phosphorus-doped hollow tubular g-C3N4 (x-P-HCN) was fabricated and used for photocatalytic CO2 reduction. Here, 1.0-P-HCN exhibited the largest CO production rate of 9.00 μmol·g-1·h-1, which was 10.22 times higher than that of bulk g-C3N4. After doping with phosphorus, the light absorption range, the CO2 adsorption capacity, and the specific surface area of the 1.0-P-HCN sample were greatly improved. In addition, the separation of photogenerated electron-hole pairs was enhanced. Furthermore, the phosphorus-doped g-C3N4 effectively activated the CO2 adsorbed on the surface of phosphorus-doped g-C3N4 photocatalysts, which greatly enhanced the CO production rate of photocatalytic CO2 reduction over that of g-C3N4.

Chitosan-assisted synthesis of 1D g-C3N4 nanorods for enhanced photocatalysis

1D porous g-C3N4 nanorods were synthesized using chitosan as a template, offering a large surface area and enhanced visible light absorption. These nanorods exhibited a remarkable 8.3-fold increase in H2 generation rate (26.6 μmol h-1) compared to bulk g-C3N4.

Imperfect makes perfect: defect engineering of photoelectrodes towards efficient photoelectrochemical water splitting

Photoelectrochemical (PEC) water splitting for hydrogen evolution has been considered as a promising technology to solve the energy and environmental issues. However, the solar-to-hydrogen (STH) conversion efficiencies of current PEC systems are far from meeting the commercial demand (10%) due to the lack of efficient photoelectrode materials. The recent rapid development of defect engineering of photoelectrodes has significantly improved the PEC performance, which is expected to break through the bottleneck of low STH efficiency. In this review, the category and the construction methods of different defects in photoelectrode materials are summarized. Based on the in-depth summary and analysis of existing reports, the PEC performance enhancement mechanism of defect engineering is critically discussed in terms of light absorption, carrier separation and transport, and surface redox reactions. Finally, the application prospects and challenges of defect engineering for PEC water splitting are presented, and the future research directions in this field are also proposed.

Selective Cocatalyst Decoration of Narrow-Bandgap Broken-Gap Heterojunction for Directional Charge Transfer and High Photocatalytic Properties

Narrow-bandgap semiconductors are promising photocatalysts facing the challenges of low photoredox potentials and high carrier recombination. Here, a broken-gap heterojunction Bi/Bi2 S3 /Bi/MnO2 /MnOx , composed of narrow-bandgap semiconductors, is selectively decorated by Bi, MnOx nanodots (NDs) to achieve robust photoredox ability. The Bi NDs insertion at the Bi2 S3 /MnO2 interface induces a vertical carrier migration to realize sufficient photoredox potentials to produce O2 •- and • OH active species. The surface decoration of Bi2 S3 /Bi/MnO2 by Bi and MnOx cocatalysts drives electrons and holes in opposite directions for optimal photogenerated charge separation. The selective cocatalysts decoration realizes synergistic surface and bulk phase carrier separation. Density functional theory (DFT) calculation suggests that Bi and MnOx NDs act as active sites enhancing the absorption and reactants activation. The decorated broken-gap heterojunction demonstrates excellent performance for full-light driving organic pollution degradation with great commercial application potential.

Boosting Interfacial Polarization Through Heterointerface Engineering in MXene/Graphene Intercalated-Based Microspheres for Electromagnetic Wave Absorption

Multi-layer 2D material assemblies provide a great number of interfaces beneficial for electromagnetic wave absorption. However, avoiding agglomeration and achieving layer-by-layer ordered intercalation remain challenging. Here, 3D reduced graphene oxide (rGO)/MXene/TiO2/Fe2C lightweight porous microspheres with periodical intercalated structures and pronounced interfacial effects were constructed by spray-freeze-drying and microwave irradiation based on the Maxwell-Wagner effect. Such approach reinforced interfacial effects via defects introduction, porous skeleton, multi-layer assembly and multi-component system, leading to synergistic loss mechanisms. The abundant 2D/2D/0D/0D intercalated heterojunctions in the microspheres provide a high density of polarization charges while generating abundant polarization sites, resulting in boosted interfacial polarization, which is verified by CST Microwave Studio simulations. By precisely tuning the 2D nanosheets intercalation in the heterostructures, both the polarization loss and impedance matching improve significantly. At a low filler loading of 5 wt%, the polarization loss rate exceeds 70%, and a minimum reflection loss (RLmin) of -67.4 dB can be achieved. Moreover, radar cross-section simulations further confirm the attenuation ability of the optimized porous microspheres. These results not only provide novel insights into understanding and enhancing interfacial effects, but also constitute an attractive platform for implementing heterointerface engineering based on customized 2D hierarchical architectures.

Synergy of S-vacancy and heterostructure in BiOCl/Bi2S3-x boosting room-temperature NO2 sensing

The special physicochemical properties of Bi₂S₃ nanomaterial endow it to be exceptional NO₂ sensing properties. However, sensors based on pure Bi₂S₃ cannot detect trace NO₂ at room temperature effectively due to the scanty active sites and poor charge transfer efficiency. Herein, vacancy defect and heterostructure engineering are rationally integrated to explore BiOCl/Bi₂S_3-x heterostructure with rich S vacancies to enhance NO₂ sensing performance. The optimized sensor based on S-vacancy-rich BiOCl/Bi₂S_3-x heterostructure exhibited a high response value (R_g/R_a = 29.1) to 1 ppm NO₂ at room temperature, which was about 17 times compared to the pristine Bi₂S₃. Meanwhile, the BiOCl/Bi₂S_3-x sensor also exhibited a short response time (36 s) towards 1 ppm NO₂ and a low theoretical detection limit (2 ppb). The superior response value of S-vacancy-rich BiOCl/Bi₂S_3-x heterostructures was ascribed to the improved electron migration at the heterointerface and the additional exposed active sites caused by the S vacancies in Bi₂S_3-x. Additionally, the sensors based on S-vacancy-rich BiOCl/Bi₂S_3-x heterostructures showed good long-term stability, outstanding selectivity, and good flexibility. This study offers an effective method for synergistically engineering defect and heterostructure to enhance gas sensing properties at room temperature.

Ti3C2 MXene supporting platinum nanoparticles as rapid electrons transfer channel and active sites for boosted photocatalytic water splitting over g-C3N4

Two-dimension (2D) MXene materials have increasingly attracted attentions in improving the photocatalytic conversion of solar-to-chemical energy over graphitic carbon nitride (g-C₃N₄). In this work, Pt nanoparticles modified few-layer Ti₃C₂ MXene sheet (MXene@Pt) was successfully prepared by chemical reduction, which was used as efficient co-catalysts to enhance the photocatalytic hydrogen evolution over porous g-C₃N₄ (PCN). The high work function of MXene@Pt and the tight 2D/2D interfacial contact between MXene@Pt and PCN significantly promoted the transfer and separation of photogenerated electron-hole. Besides, the MXene@Pt could enhance the light-harvesting of PCN and provide plentiful active sites for hydrogen evolution reaction. The hydrogen evolution activity of optimum 2D/2D MXene@Pt modified PCN (PCN/MPt-5) composite was dramatically enhanced, even higher than that of equal Pt mass modified PCN. Besides, overall water splitting was realized via a two-electron pathway with H₂O₂ and H₂ generation. This work may provide the fabrication strategy for developing MXene-based co-catalyst in photocatalysis.

Sulfur vacancy and p-n junction synergistically boosting interfacial charge transfer and separation in ZnIn2S4/NiWO4 heterostructure for enhanced photocatalytic hydrogen evolution

Constructing a p-n heterojunction with vacancy is advantageous for speeding up carrier separation and migration due to the synergy of the built-in electric field and electron capture of the vacancy. Herein, a sulfur vacancy riched-ZnIn₂S₄/NiWO₄ p-n heterojunction (VZIS/NWO) photocatalyst was rationally designed and fabricated for photocatalytic hydrogen evolution. The composition and structure of VZIS/NWO were characterized. The existence of sulfur vacancy was confirmed through X-ray photoelectron spectroscopy, high-resolution transmission electron microscope, and electron paramagnetic resonance technology. The p-n heterojunction formed by ZnIn₂S₄ and NiWO₄ was proved to provide a convenient channel to boost interfacial charge migration and separation. By reducing the band gap, the vacancy engineer can improve light absorption as well as serve as an electron trap to improve photo-induced electron-hole separation. Benefiting from the synergy of p-n heterojunction and vacancy, the optimal VZIS/NWO-5 catalyst exhibits dramatically enhanced H₂ generation performance, which is about 10-fold that of the pristine ZnIn₂S₄. This work emphasizes the synergy between p-n heterojunction and sulfur vacancy for enhancing photocatalytic hydrogen evolution performance.

Interface engineering of Mo-doped Ni9S8/Ni3S2 multiphase heterostructure nanoflowers by one step synthesis for efficient overall water splitting

Accelerating charge transfer efficiency by constructing heterogeneous interfaces on metal-based substrates is an effective way to improve the electrocatalytic performance of materials. However, minimizing the substrate-catalyst interfacial resistance to maximize catalytic activity remains a challenge. This study reports a simple interface engineering strategy for constructing Mo-Ni₉S₈/Ni₃S₂ heterostructured nanoflowers. Experimental and theoretical investigations reveal that the primary role assumed by Ni₃S₂ in Mo-Ni₉S₈/Ni₃S₂ heterostructure is to replace nickel foam (NF) substrate for electron conduction, and Ni₃S₂ has a lower potential energy barrier (0.76 to 1.11 eV) than NF (1.87 eV), resulting in a more effortless electron transfer. The interface between Ni₃S₂ and Mo-Ni₉S₈ effectively regulates electron redistribution, and when the electrons from Ni₃S₂ are transferred to Mo-Ni₉S₈, the potential energy barriers at the heterogeneous interface are 1.06 eV, lower than that between NF and Ni₃S₂ (1.53 eV). Mo-Ni₉S₈/Ni₃S₂-0.1 exhibited excellent oxygen evolution reaction (OER)/hydrogen evolution reaction (HER) bifunctional catalytic activity in 1 M KOH, with overpotentials of only 223 mV@100 mA cm^-2 for OER and 116 mV@10 mA cm^-2 for HER. Moreover, when combined with an alkaline electrolytic cell, it required only an ultra-low cell voltage of 1.51 V to drive a current density of 10 mA cm^-2. This work provides new inspirations for rationally designing interface engineering for advanced catalytic materials.

Enhanced Photocatalytic Hydrogen Production of ZnIn2S4 by Using Surface-Engineered Ti3C2Tx MXene as a Cocatalyst

Developing efficient and stable photocatalysts is crucial for photocatalytic hydrogen production. Cocatalyst loading is one of the effective strategies for improving photocatalytic efficiency. Here, Ti₃C₂T_x (T_x = F, OH, O) nanosheets have been adopted as promising cocatalysts for photocatalytic hydrogen production due to their metallic conductivity and unique 2D characterization. In particular, surface functionalized Ti₃C₂(OH)_x and Ti₃C₂O_x cocatalysts were synthesized through the alkalization treatment with NaOH and a mild oxidation treatment of Ti₃C₂F_x, respectively. ZnIn₂S₄/Ti₃C₂T_x composites, which were fabricated by the in-situ growth of ZnIn₂S₄ nanosheets on the Ti₃C₂T_x surface, exhibited the promoted photocatalytic performance, compared with the parent ZnIn₂S₄. The enhanced photocatalytic performance can be further optimized through the surface functionalization of Ti₃C₂F_x. As a result, the optimized ZnIn₂S₄/Ti₃C₂O_x composite with oxygen functionalized Ti₃C₂O_x cocatalyst demonstrated excellent photocatalytic hydrogen evolution activity. The characterizations and density functional theory calculation suggested that O-terminated Ti₃C₂O_x could effectively facilitate the transfer and separation of photogenerated electrons and holes due to the formation of a Schottky junction, with the largest difference in work function between ZnIn₂S₄ and Ti₃C₂O_x. This work paves the way for photocatalytic applications of MXene-based photocatalysts by tuning their surface termination groups.

In situ fabrication of MIL-68(In)@ZnIn2S4 heterojunction for enhanced photocatalytic hydrogen production

Metal-organic frameworks (MOFs), as a class of semiconductor-like materials, are widely used in photocatalysis. However, the limited visible light absorption and poor charge separation efficiency are the main challenges restricting their photocatalytic performance. Herein, the type II heterojunction MIL-68(In)@ZIS was successfully fabricated by in situ growth of ZnIn₂S₄ (ZIS) on the surface of a representative MOF, i.e. MIL-68(In). After composition optimization, MIL-68(In)-20@ZIS shows an extraordinary photocatalytic hydrogen production efficiency of 9.09 mmol g^-1 h^-1 and good photochemical stability, which far exceeds those of most photocatalysts. The hierarchical loose structure of MIL-68(In)-20@ZIS is conducive to the adsorption of reactants and mass transfer. Meanwhile, a large number of tight 2D contact interfaces significantly reduce the obstruction of charge transfer, paving the way for high-perform photocatalytic hydrogen evolution. The experimental results demonstrate that the MIL-68(In)@ZIS heterojunction achieves intensive photoresponse and effective charge separation and transfer benefiting from unique charge transport paths of a type II heterojunction. This study opens an avenue toward MOF-based heterojunctions for solar energy conversion.

Interface Engineering in 2D/2D Heterogeneous Photocatalysts

Assembling different 2D nanomaterials into heterostructures with strong interfacial interactions presents a promising approach for novel artificial photocatalytic materials. Chemically implementing the 2D nanomaterials' construction/stacking modes to regulate different interfaces can extend their functionalities and achieve good performance. Herein, based on different fundamental principles and photochemical processes, multiple construction modes (e.g., face-to-face, edge-to-face, interface-to-face, edge-to-edge) are overviewed systematically with emphasis on the relationships between their interfacial characteristics (e.g., point, linear, planar), synthetic strategies (e.g., in situ growth, ex situ assembly), and enhanced applications to achieve precise regulation. Meanwhile, recent efforts for enhancing photocatalytic performances of 2D/2D heterostructures are summarized from the critical factors of enhancing visible light absorption, accelerating charge transfer/separation, and introducing novel active sites. Notably, the crucial roles of surface defects, cocatalysts, and surface modification for photocatalytic performance optimization of 2D/2D heterostructures are also discussed based on the synergistic effect of optimization engineering and heterogeneous interfaces. Finally, perspectives and challenges are proposed to emphasize future opportunities for expanding 2D/2D heterostructures for photocatalysis.

Detecting and Quantifying Wavelength-Dependent Electrons Transfer in Heterostructure Catalyst via In Situ Irradiation XPS

The identity of charge transfer process at the heterogeneous interface plays an important role in improving the stability, activity, and selectivity of heterojunction catalysts. And, in situ irradiation X-ray photoelectron spectroscopy (XPS) coupled with UV light optical fiber measurement setup is developed to monitor and observe the photoelectron transfer process between heterojunction. However, the in-depth relationship of binding energy and irradiation light wavelength is missing based on the fact that the incident light is formed by coupling light with different wavelengths. Furthermore, a quantitative understanding of the charge transfer numbers and binding energy remains elusive. Herein, based on the g-C₃ N₄ /SnO₂ model catalyst, a wavelength-dependent Boltzmann function to describe the changes of binding energy and wavelength through utilizing a continuously adjustable monochromatic light irradiation XPS technique is established. Using this method, this study further reveals that the electrons transfer number can be readily calculated forming an asymptotic model. This methodology provides a blueprint for deep understanding of the charge-transfer rules in heterojunction and facilitates the future development of highly active advanced catalysts.

Unexpected High-Performance Photocatalytic Hydrogen Evolution in Co@NCNT@ZnIn2 S4 Triggered by Directional Charge Separation and Transfer

The structural design of photocatalysts is highly related to the separation and transfer of photogenerated carriers, which is essential for the improvement of photocatalytic hydrogen evolution performance. Here, the hybrid photocatalyst M@NCNT@ZIS (M: Fe, Co, Ni; NCNT: nitrogen-doped carbon nanotube; ZIS: ZnIn₂ S₄ ) with a hierarchical structure is rationally designed and precisely synthesized. The unique hollow structure with a large specific surface area offers abundant reactive sites, thus increasing the adsorption of reactants. Importantly, the properly positioned metal nanoparticles realize the directional charge migration from ZIS to M@NCNT, which significantly improves the efficiency of charge separation. Furthermore, the intimate interface between M@NCNT and ZIS effectively facilitates charge migration by shortening the transfer distance and providing numerous transport channels. As a result, the optimized Co@NCNT@ZIS exhibits a remarkable photocatalytic hydrogen evolution efficiency (43.73 mmol g^-1 h^-1 ) without Pt as cocatalyst. Experimental characterizations and density functional theory calculations demonstrate that the synergistic effect between hydrogen adsorption and interfacial charge transport is of great significance for improving photocatalytic hydrogen production performance.

Adducing Knowledge Capabilities of Instrumental Techniques Through the Exploration of Heterostructures' Modification Methods

The ongoing evolution of technology has facilitated the global research community to rapidly escalate the constant development of novel advancements in science. At the forefront of such achievements in the field of photocatalysis is the utilisation, and in oftentimes, the adaptation of modern instrumentation to understand photo-physical properties of complex heterostructures. For example, coupling in-situ X-ray Raman scattering spectroscopy for real-time degradation of catalytic materials.

Promoted photocarrier separation by dipole engineering in two-dimensional perovskite/C2N van der Waals heterostructures

Due to the aggravation of environmental pollution and the energy crisis, it is urgent to develop and design environment-friendly and efficient photocatalysts for water splitting. van der Waals heterostructures composed of different two-dimensional materials offer an easily accessible way to combine properties of individual materials for applications. Herein, a novel Cs₃Bi₂I₉/C₂N heterostructure is proposed through first-principles calculations. The structural, electronic, and optical properties, as well as the charge transfer mechanism at the interface of Cs₃Bi₂I₉/C₂N are systematically investigated. Due to the difference between the work functions of Cs₃Bi₂I₉ and C₂N monolayers, when they are constructed into heterostructures, redistribution of charge occurs in the whole structure, and some of the charge transfer occurs at the interface due to the formation of an internal electric field. The band structure of Cs₃Bi₂I₉/C₂N has type-II band alignment, and the band edge position as well as the band-gap value of the heterostructure are suitable for visible light water splitting. The in-plane biaxial strain, interfacial spacing, and external electric field can effectively modulate the electronic structure and photocatalytic performance of the heterostructure. Under certain conditions, the heterostructure can be changed from type-II to type-I band alignment, accompanied by the transition from an indirect band-gap semiconductor to a direct band-gap semiconductor. Moreover, the intrinsic anion defect (I vacancy) at different positions, as donor defects, can introduce defect levels near the conduction band edge, which affects the transition of photogenerated carriers in these systems. Our findings provide a theoretical design for strategies to improve the performance of two-dimensional perovskites/C₂N in photocatalytic and optoelectronic applications.

The Potential Strategies of ZnIn2S4-Based Photocatalysts for the Enhanced Hydrogen Evolution Reaction

Photocatalysis is a potential strategy to solve energy and environmental problems. The development of new sustainable photocatalysts is a current topic in the field of photocatalysis. ZnIn2S4, a visible light-responsive photocatalyst, has attracted extensive research interest in recent years. Due to its suitable band gap, strong chemical stability, durability, and easy synthesis, it is expected to become a new hot spot in the field of photocatalysis in the near future. This mini-review presents a comprehensive summary of the modulation strategies to effectively improve the photocatalytic activity of ZnIn2S4 such as morphology and structural engineering, defects engineering, doping engineering, and heterojunction engineering. This review aims to provide reference to the proof-of-concept design of highly active ZnIn2S4-based photocatalysts for the enhanced hydrogen evolution reaction.

Synergistic Engineering of Se Vacancies and Heterointerfaces in Zinc-Cobalt Selenide Anode for Highly Efficient Na-Ion Batteries

The exploitation of effective strategies to accelerate the Na⁺ diffusion kinetics and improve the structural stability in the electrode is extremely important for the development of high efficientcy sodium-ion batteries. Herein, Se vacancies and heterostructure engineering are utilized to improve the Na⁺ -storage performance of transition metal selenides anode prepared through a facile two-in-one route. The experimental results coupled with theoretical calculations reveal that the successful construction of the Se vacancies and heterostructure interfaces can effectively lower the Na⁺ diffusion barrier, accelerate the charge transfer efficiency, improve Na⁺ adsorption ability, and provide an abundance of active sites. Consequently, the batteries based on the constructed ZnSe/CoSe₂ -CN anode manifest a high initial Coulombic efficiency (97.7%), remarkable specific capacities (547.1 mAh g^-1 at 0.5 A g^-1 ), superb rate capability (362.1 mAh g^-1 at 20 A g^-1 ), as well as ultrastable long-term stability (1000 cycles) with a satisfied specific capacity (535.6 mAh g^-1 ) at 1 A g^-1 . This work facilitates an in-depth understanding of the synergistic effect of vacancies and heterojunctions in improving the Na⁺ reaction kinetics, providing an effective strategy to the rational design of key materials for high efficiency rechargeable batteries.

A MOF-derived hierarchical CoP@ZnIn2S4 photocatalyst for visible light-driven hydrogen evolution

A hierarchical CoP@ZnIn₂S₄ photocatalyst was prepared via a MOF-templated strategy. Owing to the unique composition and morphology that can facilitate the separation of photoexcited carriers, enhance light absorption and provide high surface area, CoP@ZnIn₂S₄ exhibited a H₂ evolution rate of 0.103 mmol h^-1 and remained stable over 24 hours.

SnS2/polypyrrole for high-efficiency photocatalytic oxidation of benzylamine

Here, SnS2/polypyrrole (PPy) was synthesized, which shows high catalytic activity for the photocatalytic oxidation of benzylamine under mild conditions (at 25 oC, in air and without adding additional sacrificial reagent,...