Recent Progress of Sub-Nanometric Materials in Photothermal Energy Conversion

Polymer nanocomposite dielectrics for capacitive energy storage

Owing to their excellent discharged energy density over a broad temperature range, polymer nanocomposites offer immense potential as dielectric materials in advanced electrical and electronic systems, such as intelligent electric vehicles, smart grids and renewable energy generation. In recent years, various nanoscale approaches have been developed to induce appreciable enhancement in discharged energy density. In this Review, we discuss the state-of-the-art polymer nanocomposites with improved energy density from three key aspects: dipole activity, breakdown resistance and heat tolerance. We also describe the physical properties of polymer nanocomposite interfaces, showing how the electrical, mechanical and thermal characteristics impact energy storage performances and how they are interrelated. Further, we discuss multi-level nanotechnologies including monomer design, crosslinking, polymer blending, nanofiller incorporation and multilayer fabrication. We conclude by presenting the current challenges and future opportunities in this field.

Modeling of the synergistic anti-reflection effect in gradient refractive index films integrated with subwavelength structures for photothermal conversion

Photothermal materials generally suffer from challenges such as low photothermal conversion efficiency and inefficient full-spectrum utilization of solar energy. This paper proposes gradient refractive index transparent ceramics (GRITCs) integrated with subwavelength nanostructure arrays and simulates the synergistic anti-reflection effect by an admittance recursive model. An innovative subwavelength structure, possessing a superior light-trapping capability, is initially crafted based on this model. Subsequently, various intelligent optimization algorithms including genetic algorithm, particle swarm optimization, and simulated annealing are employed to optimize the structure of gradient refractive index films respectively. Finally, the photothermal conversion efficiencies of devices based on different photothermal materials are calculated. The simulations and finite-difference time-domain calculations demonstrate that the three-layer GRITCs integrated with an optimal SNA exhibit outstanding full-spectrum and omnidirectional anti-reflection performance. The solar transmittance of the devices can exceed 97% for light wavelengths ranging from 300 to 2500 nm over the full angle of incidence. Our results reveal that the synergistic anti-reflection effect in the SNAs and GRITCs can enhance the photothermal conversion efficiency by more than 20%.

All-catecholate-stabilized black titanium-oxo clusters for efficient photothermal conversion

The controlled synthesis of titanium-oxo clusters (TOCs) completely stabilized by organic dye ligands with high stability and superior light absorption remains a significant challenge. In this study, we report the syntheses of three atomically precise catechol (Cat)-functionalized TOCs, [Ti2(Cat)2(OEgO)2(OEgOH)2] (Ti2), [Ti8O5(Cat)9(iPrO)4(iPrOH)2] (Ti8), and [Ti16O8(OH)8(Cat)20]·H2O·PhMe (Ti16), using a solvent-induced strategy (HOEgOH = ethylene glycol; iPrOH = isopropanol; PhMe = toluene). Interestingly, the TiO core of Ti16 is almost entirely enveloped by catechol ligands, making it the first all-catechol-protected high-nuclearity TOC. In contrast, Ti2 and Ti8 have four weakly coordinated ethylene glycol ligands and six weakly coordinated iPrOH ligands, respectively, in addition to the catechol ligands. Ti16 is visually evident in its distinctively black appearance, which belongs to black TOCs (B-TOCs) and exhibits an ultralow optical band gap. Furthermore, Ti16 displays exceptional stability in various media/environments, including exposure to air, solvents, and both acidic and alkaline aqueous solutions due to its comprehensive protection by catechol ligands and rich intra-cluster supramolecular interactions. Ti16 has superior photoelectric response qualities and photothermal conversion capabilities compared to Ti2 and Ti8 due to its ultralow optical band gap and remarkable stability. This discovery not only represents a huge step forward in the creation of all-catecholate-protected B-TOCs with ultralow optical band gaps and outstanding stability, but it also gives key valuable mechanistic insights into their photothermal/electric applications.

Key Role of Asymmetric Photothermal Effect in Selectively Chiral Switching of Plasmonic Dimer Driven by Circularly Polarized Light

Strong interaction between circularly polarized light and chiral plasmonic nanostructures can enable controllable asymmetric photophysical processes, such as selective chiral switching of a plasmonic nanorod-dimer. Here, we uncover the underlying physics that governs this chiral switching by theoretically investigating the interplay between asymmetric photothermal and optomechanical effects. We find that the photothermally induced local temperature rises could play a key role in activating the dynamic chiral configurations of a plasmonic dimer due to the temperature-sensitive molecular linkages located at the gap region. Importantly, different temperature rises caused by the opposite handedness of light could facilitate selective chiral switching of the plasmonic dimer driven by asymmetric optical torques. Our analyses on the wavelength-dependent selectively chiral switching behaviors are in good agreement with the experimental observations. This work contributes to a comprehensive understanding of the physical mechanism involved in the experimentally designed photoresponsive plasmonic nanosystems for practical applications.

Efficient Photothermal Anti-/Deicing Enabled by 3D Cu2-x S Encapsulated Phase Change Materials Mixed Superhydrophobic Coatings

Photothermal superhydrophobic surfaces are one of the most promising anti-/deicing materials, yet they are limited by the low energy density and intermittent nature of solar energy. Here, a coupling solution based on microencapsulated phase change materials (MPCMs) that integrates photothermal effect and phase change thermal storage is proposed. Dual-shell octahedral MPCMs with Cu2 O as the first layer and 3D Cu2-x S as the second layer for the first time is designed. By morphology and phase manipulation of the Cu2-x S shell, the local surface plasmonic heating modulation of MPCMs is realized, and the MPCM reveals full-spectrum high absorption with a photothermal conversion efficiency up to 96.1%. The phase change temperature and enthalpy remain in good consistency after 200 cycles. Multifunctional photothermal phase-change superhydrophobic composite coatings are fabricated by combining the hydrolyzed and polycondensation products of octadecyl trichlorosilane and the dual-shell MPCM. The multifunctional coatings exhibit excellent anti-/deicing performance under low temperature and high humidity conditions. This work not only provides a new approach for the design of high-performance MPCMs but also opens up an avenue for the anti-icing application of photothermal phase-change superhydrophobic composite coatings.

Tailoring mSiO2-SmCox nanoplatforms for magnetic/photothermal effect-induced hyperthermia therapy

Hyperthermia therapy is a hotspot because of its minimally invasive treatment process and strong targeting effect. Herein, a synergistic magnetic and photothermal therapeutic nanoplatform is rationally constructed. The well-dispersive mSiO2-SmCox nanoparticles (NPs) were synthesized through a one-step procedure with the regulated theoretical molar ratio of Sm/Co among 1:1, 1:2, and 1:4 for controlling the dispersion and magnetism properties of SmCox NPs in situ growth in the pore structure of mesoporous SiO2 (mSiO2), where mSiO2 with diverse porous structures and high specific surface areas serving for locating the permanent magnetic SmCox NPs. The mSiO2-SmCox (Sm/Co = 1:2) NPs with highly dispersed and uniform morphology has an average diameter of ∼73.08 nm. The photothermal conversion efficiency of mSiO2-SmCox (Sm/Co = 1:2) NPs was determined to be nearly 41%. The further in vitro and in vivo anti-tumor evaluation of mSiO2-SmCox (Sm/Co = 1:2) NPs present promising potentials for hyperthermia-induced tumor therapy due to magnetic and photothermal effects.

Heteropoly Blue/Carbon Nanotubes Nanocomposites as High-Performance Photothermal Conversion Materials

To realize the direct and full use of the widely distributed solar energy, developing novel materials with superb photothermal conversion capability is essential. Although heteropoly blue has intrinsic outstanding solar absorption and photothermal conversion properties, its spectral absorption in the infrared region is weak. Here, composites of heteropoly blue and carbon nanotubes (HPB/CNTs) are synthesized depending on electrostatic interactions by facile microwave sonication and freeze-drying. The doped CNTs can dramatically improve the spectral absorption performance of HPB ontology in the infrared region. As a result, the light absorption of the optimized HPB/CNTs (20 %) reaches more than 95 % in the range of 200-2400 nm, showing promising prospects as high-performance photothermal conversion material in the applications of solar desalination and wastewater treatment.

Recent progress of sub-1 nm nanomaterials: synthesis, polymer-analogue properties and applications in redox catalysis

Sub-1 nm nanomaterials (SNMs) have attracted attention for their novel structures and size-related properties. In the past decade, various SNMs were synthesized, such as nanowires, nanorings, nanosheets, nanobelts, nanotubes, and other superstructures. We discussed their synthetic strategies systematically, including the ligand pathway and the cluster-nuclei co-assembly pathway. In addition, SNMs exhibit unique size-related properties. Firstly, SNWs show polymer-analogue properties due to their sub-nanometric size and ultrahigh aspect ratio. We illustrate the polymer-analogue properties on both microscopic and macroscopic scales. The macroscopic assemblies of SNWs can be widely applied for organic liquid storage, energy, and optical applications. Finally, we summarized the applications of SNMs in redox catalysis. Their extraordinary catalytic activity is attributed to their large specific surface area and electronic delocalization at the sub-nanometric scale. We hope this feature article can provide new viewpoints on the design and applications of SNMs.

Metalated covalent organic frameworks: from synthetic strategies to diverse applications

Covalent organic frameworks (COFs) are a class of organic crystalline porous materials discovered in the early 21st century that have become an attractive class of emerging materials due to their high crystallinity, intrinsic porosity, structural regularity, diverse functionality, design flexibility, and outstanding stability. However, many chemical and physical properties strongly depend on the presence of metal ions in materials for advanced applications, but metal-free COFs do not have these properties and are therefore excluded from such applications. Metalated COFs formed by combining COFs with metal ions, while retaining the advantages of COFs, have additional intriguing properties and applications, and have attracted considerable attention over the past decade. This review presents all aspects of metalated COFs, from synthetic strategies to various applications, in the hope of promoting the continued development of this young field.

Liposome-Embedded Cu2-xAgxS Nanoparticle-Mediated Photothermal Immunoassay for Daily Monitoring of cTnI Protein Using a Portable Thermal Imager

Functional photothermal nanomaterials have gained widespread attention in the field of precise cancer therapy and early disease diagnosis due to their unique photothermal conversion properties. However, the relatively narrow temperature response range and the outputable accuracy of commercial thermometers limit the accurate detection of biomarkers. Herein, we designed a liposome-embedded Cu_2-xAg_xS amplification-based photothermal sensor for the accurate determination of cardiac troponin I (cTnI) in health monitoring and point-of-care testing (POCT). The combinable 3D-printing detecting device monitored and visualized target signal changes in the testing system under the excitation of near-infrared (NIR) light, which was recorded and evaluated for possible pathogenicity by a smartphone. Notably, we predicted the potentially efficient thermal conversion efficiency of Cu_2-xAg_xS from the structure and charge density distribution, calculated by the first-principles and density functional theory (DFT), which provided a theoretical basis for the construction of novel photothermal materials, and the experimental results proved the correctness of the theoretical projections. Under optimal conditions, the photothermal immunoassay showed a dynamic linear range of 0.02-10 ng mL^-1 with a detection limit of 11.2 pg mL^-1. This work instructively introduces promising theoretical research and provides new insights for the development of sensitive portable photothermal biosensors.