Freestanding Graphene Fabric Film for Flexible Infrared Camouflage

Capillary Force-Induced Graphene Spontaneous Transfer and Encapsulation of Silver Nanowires for Highly-Stable Transparent Electrodes

Silver nanowires (NWs) (AgNWs) have emerged as the most promising conductive materials in flexible optoelectronic devices owing to their excellent photoelectric properties and mechanical flexibility. It is widely acknowledged that the practical application of AgNW networks faces challenges, such as high surface roughness, poor substrate adhesion, and limited stability. Encapsulating AgNW networks with graphene has been recognized as a viable strategy to tackle these issues. However, conventional methods like self-assembly reduction-oxidation or chemical vapor deposition often yield graphene protective layers with inherent defects. Here, we propose a novel one-step hot-pressing method containing ethanol solution that combines the spontaneous transfer and encapsulation process of rGO films onto the surface of the AgNWs network, enabling the preparation of flexible rGO/AgNWs/PET (reduced graphene oxide/silver NWs/polyethylene terephthalate) electrodes. The composite electrode exhibits outstanding photoelectric properties (T ≈ 88%, R ≈ 6 Ω sq-1) and possesses a smooth surface, primarily attributed to the capillary force generated by ethanol evaporation, ensuring the integrity of the rGO delamination process on the original substrate. The capillary force simultaneously promotes the tight encapsulation of rGO and AgNWs, as well as the welding of the AgNWs junction, thereby enhancing the mechanical stability (20,000 bending cycles and 100 cycles of taping tests), thermal stability (∼30 °C and ∼25% humidity for 150 days), and environmental adaptability (100 days of chemical attack) of the electrode. The electrode's practical feasibility has been validated by its exceptional flexibility and cycle stability (95 and 98% retention after 5000 bending cycles and 12,000 s long-term cycles) in flexible electrochromic devices.

Multispecies-coadsorption-induced rapid preparation of graphene glass fiber fabric and applications in flexible pressure sensor

Direct chemical vapor deposition (CVD) growth of graphene on dielectric/insulating materials is a promising strategy for subsequent transfer-free applications of graphene. However, graphene growth on noncatalytic substrates is faced with thorny issues, especially the limited growth rate, which severely hinders mass production and practical applications. Herein, graphene glass fiber fabric (GGFF) is developed by graphene CVD growth on glass fiber fabric. Dichloromethane is applied as a carbon precursor to accelerate graphene growth, which has a low decomposition energy barrier, and more importantly, the produced high-electronegativity Cl radical can enhance adsorption of active carbon species by Cl-CH2 coadsorption and facilitate H detachment from graphene edges. Consequently, the growth rate is increased by ~3 orders of magnitude and carbon utilization by ~960-fold, compared with conventional methane precursor. The advantageous hierarchical conductive configuration of lightweight, flexible GGFF makes it an ultrasensitive pressure sensor for human motion and physiological monitoring, such as pulse and vocal signals.

Transparent grating-based metamaterials for dynamic infrared radiative regulation smart windows

Dynamic infrared radiation regulation has been widely explored for smart windows because of its vital importance for comfortable and energy-efficient buildings. However, it remains a great challenge to synchronously achieve high visible transmittance and pronounced infrared tunability. Here, we propose a dynamic infrared tunable metamaterial composed of indium tin oxide (ITO) gratings, an air insulator, and an ITO reflector. The ITO grating-based infrared radiation regulator exhibits a high emissivity tunability of 0.73 at 8-13 μm while maintaining a high visible transmittance of 0.65 and 0.72 before and after actuation, respectively. By adjusting the geometric parameters, the tunable bandwidth can be further extended to 3-30 μm and the ultra-broadband tunability reaches 0.62. The excellent infrared tunable performance arises from the insulator thickness-dependent effect of Fabry-Pérot and propagating surface plasmon resonance coupling and decoupling, which lead to perfect and low absorption, respectively. This work provides potential for the advancement of smart window technology and makes a significant contribution to sustainable buildings.

Color morphing surfaces with effective chemical shielding

Color morphing refers to color change in response to an environmental stimulus. Photochromic materials allow color morphing in response to light, but almost all photochromic materials suffer from degradation when exposed to moist/humid environments or harsh chemical environments. One way of overcoming this challenge is by imparting chemical shielding to the color morphing materials via superomniphobicity. However, simultaneously imparting color morphing and superomniphobicity, both surface properties, requires a rational design. In this work, we systematically design color morphing surfaces with superomniphobicity through an appropriate combination of a photochromic dye, a low surface energy material, and a polymer in a suitable solvent (for one-pot synthesis), applied through spray coating (for the desired texture). We also investigate the influence of polymer polarity and material composition on color morphing kinetics and superomniphobicity. Our color morphing surfaces with effective chemical shielding can be designed with a wide variety of photochromic and thermochromic pigments and applied on a wide variety of substrates. We envision that such surfaces will have a wide range of applications including camouflage soldier fabrics/apparel for chem-bio warfare, color morphing soft robots, rewritable color patterns, optical data storage, and ophthalmic sun screening.

Fabrication of Multifunctional Tents Using Canvas Fabric

Herein, this study was compiled to investigate a suitable solution for the fabrication and development of the multifunctional defense tent from previously reported research. The military always needs to protect their soldiers and equipment from detection. The advancement of infrared detection technology emphasizes the significance of infrared camouflage materials, reducing thermal emissions for various applications. Objects emit infrared radiation detectable by devices, making military targets easily identifiable. Infrared camouflage mitigates detection by lowering an object's infrared radiation, achieved by methods such as reducing surface temperature, which is crucial in designing military tents with infrared (IR) camouflage, considering water repellency and antibacterial features. Water repellency, as well as antimicrobial properties, in army tents is also important as they have to survive in different situations. All these problems should be addressed with the required properties; therefore, the authors try to introduce a new method from which multifunctional tents can be produced through economical, multifunctional, and sustainable materials that have IR protection, water repellency, ultraviolet (UV) protection, air filtration and permeability, and antimicrobial properties. There is still no tent that performs multiple functions at a time, even those functions that do not correlate with each other such as water repellency, IR protection, antimicrobial, and air permeability. So, a multifunctional tent could be the solution to all these problems having all the properties discussed above. In this study based on the literature review, authors concluded a method for the required tent for canvas fabric coated with zinc sulfide (ZnS), graphene oxide (GO), and zinc oxide (ZnO), or these materials should be incorporated in fiber formation because fiber composition has more impact. These multifunctional tents will be very beneficial due to their multifunctions like weather resistance, durability, and long life. These would help the army in their missions by concealing their soldiers and equipment from detection by cameras and providing filtered air inside the tent in case of gases or explosions. The proposed method will help to fulfill the stated and implied needs of customers.

Engineering of graphene-based composites with hexagonal boron nitride and PEDOT:PSS for sensing applications

A unique nanomaterial has been developed for sweat analysis, including glucose level monitoring. Simple resusable low-cost sensors from composite materials based on graphene, hexagonal boron nitride, and conductive PEDOT:PSS (poly(3,4-ethylenedioxythiophene)polystyrene sulfonate) polymer have been developed and fabricated via 2D printing on flexible substrates. The sensors were tested as biosensors using different water-based solutions. A strong increase in the current response (several orders of magnitude) was observed for aqua vapors or glucose solution vapors. This property is associated with the sorption capacity of graphene synthesized in a volume of plasma jets and thus having many active centers on the surface. The structure and properties of graphene synthesized in a plasma are different from those of graphene created by other methods. As a result, the current response for a wearable sensor is 3-5 orders of magnitude higher for the reference blood glucose concentration range of 4-14 mM. It has been found that the most promising sensor with the highest response was fabricated based on the graphene:PEDOT:PSS composite. The graphene:h-BN:PEDOT:PSS (h-BN is hexagonal boron nitride) sensors demonstrated a longer response and the highest response after the functionalization of the sensors with a glucose oxidase enzyme. The reusable wearable graphene:PEDOT:PSS glucose sensors on a paper substrate demonstrated a current response of 10-10 to 10-5 A for an operating voltage of 0.5 V and glucose range of 4-10 mM.

2D Materials Beyond Post-AI Era: Smart Fibers, Soft Robotics, and Single Atom Catalysts

Recent consecutive discoveries of various 2D materials have triggered significant scientific and technological interests owing to their exceptional material properties, originally stemming from 2D confined geometry. Ever-expanding library of 2D materials can provide ideal solutions to critical challenges facing in current technological trend of the fourth industrial revolution. Moreover, chemical modification of 2D materials to customize their physical/chemical properties can satisfy the broad spectrum of different specific requirements across diverse application areas. This review focuses on three particular emerging application areas of 2D materials: smart fibers, soft robotics, and single atom catalysts (SACs), which hold immense potentials for academic and technological advancements in the post-artificial intelligence (AI) era. Smart fibers showcase unconventional functionalities including healthcare/environmental monitoring, energy storage/harvesting, and antipathogenic protection in the forms of wearable fibers and textiles. Soft robotics aligns with future trend to overcome longstanding limitations of hard-material based mechanics by introducing soft actuators and sensors. SACs are widely useful in energy storage/conversion and environmental management, principally contributing to low carbon footprint for sustainable post-AI era. Significance and unique values of 2D materials in these emerging applications are highlighted, where the research group has devoted research efforts for more than a decade.

Ultrathin Metal Film on Graphene for Percolation-Threshold-Limited Thermal Emissivity Control

Translucent Au/graphene hybrid films are shown to be effective in reducing thermal emission from the underlying surfaces when the deposition thickness of Au is close to the percolation threshold. The critical Au deposition thickness for an abrupt change in emissivity is reduced from 15 nm (Si substrate) to a percolation-threshold-limited thickness of 8.5 nm (graphene/Si substrate) because of the chemical inertness of graphene leading to the deposited Au atoms forming a thin, crystalline layer. The effect of the graphene layer on the optical properties of the hybrid film is highlighted by a drastic increase in infrared absorptivity, whereas the visible absorptivity is marginally affected by the presence of a graphene layer. The level of thermal emission from the Au/graphene hybrid films with the percolation-threshold-limited Au thickness is stable even with high background temperatures of up to 300 °C and mechanical strains of ≈4%. As an example of a thermal management application, an anti-counterfeiting device is demonstrated; thermal-camouflage-masked text fabricated with an Au/graphene hybrid film is discernible only using a thermographic camera. Ultrathin metal film assisted by a graphene layer will provide a facile platform for thermal management with semi-transparency, flexibility, and transferability to arbitrary surfaces.

Electric field-induced orientation of silicon carbide whiskers for directional and localized thermal management

Incorporating high thermal conductivity fillers into the matrix material and optimizing their distribution offers a targeted approach to controlling heat flow conduction. However, the design of composite microstructure, particularly the precise orientation of fillers in the micro-nano domain, remains a formidable challenge to date. Here, we report a novel method for constructing directional/localized thermal conduction pathways based on silicon carbide whiskers (SiCWs) in the polyacrylamide (PAM) gel matrix using micro-structured electrodes. SiCWs are one-dimensional nanomaterials with ultra-high thermal conductivity, strength, and hardness. The outstanding properties of SiCWs can be maximized through ordered orientation. Under the conditions of 18 V voltage and 5 MHz frequency, SiCWs can achieve complete orientation in only about 3 s. In addition, the prepared SiCWs/PAM composite exhibits interesting properties, including enhanced thermal conductivity and localized conduction of heat flow. When the SiCWs concentration is 0.5 g·L^-1, the thermal conductivity of SiCWs/PAM composite is about 0.7 W·m^-1·K^-1, which is 0.3 W·m^-1·K^-1 higher than that of PAM gel. This work achieved structural modulation of the thermal conductivity by constructing a specific spatial distribution of SiCWs units in the micro-nanoscale domain. The resulting SiCWs/PAM composite has unique localized heat conduction properties and is expected to become a new generation of composites with better characteristics and functions in thermal transmission and thermal management.

Graphene Infrared Radiation Management Targeting Photothermal Conversion for Electric-Energy-Free Crude Oil Collection

Graphene has been widely used as a solar absorber for its broad-band absorption. However, targeting a higher photothermal efficiency, the intrinsic infrared radiation loss of graphene requires to be further reduced. Herein, band structure engineering is performed to modulate graphene infrared radiation. Nitrogen-doped vertical graphene is grown on quartz foam (NVGQF) by the plasma-enhanced chemical vapor deposition method. Under the premise of keeping high solar absorption (250-2500 nm), graphitic nitrogen doping effectively modulates the infrared emissivity (2.5-25 μm) of NVGQF from 0.96 to 0.68, reducing the radiation loss by ∼31%. Based on the excellent photothermal properties of NVGQF, a temperature-gradient-driven crude oil collecting raft is designed, where the crude oil flows along the collecting path driven by the viscosity gradient without any external electric energy input. Compared with a nondoped vertical graphene quartz foam raft, the NVGQF raft with a superior photothermal efficiency shows a significantly enhanced crude oil collecting efficiency by three times. The advances in this work suggest broad radiation-managed application platforms for graphene materials, such as seawater desalination and personal or building thermal management.

Combination of Micelle Collapse and CuNi Surface Dissolution for Electrodeposition of Magnetic Freestanding Chitosan Film

Magnetic chitosan hydrogel has aroused immense attention in recent years due to their biomedical significance and magnetic responsiveness. Here, A new electrodeposition method is reported for the fabrication of a novel CuNi-based magnetic chitosan freestanding film (MCFF) in an acidic chitosan plating bath containing SDS-modified CuNi NPs. Contrary to chitosan’s anodic and cathodic deposition, which typically involves electrochemical oxidation, the synthetic process is triggered by coordination of chitosan with Cu and Ni ions in situ generated by the controlled surface dissolution of the suspended NPs with the acidic plating bath. The NPs provide not only the ions required for chitosan growth but also become entrapped during electrodeposition, thereby endowing the composite with magnetic properties. The obtained MCFF offers a wide range of features, including good mechanical strength, magnetic properties, homogeneity, and morphological transparency. Besides the fundamental interest of the synthesis itself, sufficient mechanical strength ensures that the hydrogel can be used by either peeling it off of the electrode or by directly building a complex hydrogel electrode. Its fast and easy magnetic steering, separation and recovery, large surface area, lack of secondary pollution, and strong chelating capability could lead to it finding applications as an electrochemical detector or adsorbent.

Complementary Chemical Vapor Deposition Fabrication for Large-Area Uniform Graphene Glass Fiber Fabric

The lightweight, flexible, high-performance electrothermal material is in high demand in object thermal management. Graphene glass fiber fabric (GGFF) is characterized by excellent electrical conductivity, light weight, and high flexibility, showing superiorities as an electrothermal material. However, the traditional single-carbon-precursor chemical vapor deposition (CVD) graphene growth strategy commonly suffers from the severe thickness nonuniformity of the large-sized graphene film along the gas-flowing direction. Herein, a complementary CVD graphene growth strategy based on the simultaneous introduction of high- and low-decomposition-energy-barrier mixed carbon precursors is developed. In this way, the large-area uniform GGFF with a dramatically decreased nonuniformity coefficient is fabricated (0.260 in 40 cm × 4 cm). GGFF-based heater presents a widely tunable temperature range (20-170 °C) at low working voltage (<10 V) and uniform large-area heating temperature (171.4 ± 3.6 °C in 20 cm × 15 cm), which realizes remarkable anti/deicing performances under the low energy consumption (fast ice melting rate of 79 s mm^-1 under a low energy consumption of 0.066 kWh mm^-1 m^-2 ). The large-area uniform GGFF possesses substantial advantages for applications in thermal management, and the complementary CVD fabrication strategy shows reliable scalability and universality, which can be extended to the synthesis of various materials.

Durability Study of Thermal Transfer Printed Textile Electrodes for Wearable Electronic Applications

Textile-based electronics hold great promise because they can endow wearable devices with soft and comfortable characteristics. However, the inherent porosity and fluffiness of fabrics result in high surface roughness, which presents great challenges in the manufacture of high-performance fabric electrodes. In this work, we propose a thermal transfer printing method to address the above challenges, in which electrodes or circuits of silver flake/thermoplastic polyurethane (TPU) composites are prefabricated on a release film by coating and laser engraving and then laminated by hot-pressing to a variety of fabrics and textiles. This universal and scalable production technique enables fabric electrodes to be made without compromising the original wearability, washability, and stretchability of textiles. The prepared fabric electrodes exhibit high conductivity (5.48 × 10⁴ S/cm), high adhesion (≥1750 N/m), good abrasion/washing resistance, high patterning resolution (∼40 μm), and good electromechanical performance up to 50% strain. To demonstrate the potential applications, we developed textile-based radio frequency identification (RFID) tags for remote identification and a large-sized heater for wearable thermotherapy. More importantly, the solvent-free thermal transfer printing technology developed in this paper enables people to DIY interesting flexible electronics on clothes with daily tools, which can promote the commercial application of smart textile-based electronics.