Enhancing Horizontal Ratio of Transition Dipole Moment in Homoleptic Ir Complexes for High Outcoupling Efficiency of Organic Light-Emitting Diodes

Hexacarbazolylbenzene: An Excellent Host Molecule Causing Strong Guest Molecular Orientation and the High-Performance OLEDs

Hexacarbazolylbenzene (6CzPh), which is benzene substituted by six carbazole rings, is a simple and attractive compound. Despite the success of a wide variety of carbazole derivatives in organic light-emitting diodes (OLEDs), 6CzPh has not received attention so far. Here, excellent performances of 6CzPh are revealed as a host material in OLEDs regarding conventional host materials. Various strategies are implemented to improve the performance of OLEDs, e.g., triplet utilization by thermally activated delayed fluorescence (TADF) and phosphorescence emitters for maximizing internal quantum efficiency, and molecular orientation control for increasing outcoupling efficiency. The present host material is suited for both criteria. Robustness of the structure and sufficiently high triplet energy enables a high external quantum efficiency with a long device lifetime. Besides, the host material boosts the horizontal molecular orientations of several guest emitters. It is noteworthy that disk-shaped 4CzIPN marks the complete horizontal molecular orientations (Θh = 100%, S = -0.50). These results provide an effective way of improving efficiencies without sacrificing device durability for future OLEDs.

The third strategy: modulating emission colors of organic light-emitting diodes with UV light during the device fabrication process

The modulation of emission color is one of the most critical topics in the research field of organic light-emitting diodes (OLEDs). Currently, only two ways are commonly used to tune the emission colors of OLEDs: one is to painstakingly synthesize different emitters with diverse molecular structures, the other is to precisely control the degree of aggregation or doping concentration of one emitter. To develop a simpler and less costly method, herein we demonstrate a new strategy in which the emission colors of OLEDs can be continuously changed with UV light during the device fabrication process. The proof of concept is established by a chromene-based Ir(iii) complex, which shows bright green emission and yellow emission before and after UV irradiation, respectively. Consequently, under different durations of UV irradiation, the resulting Ir(iii) complex is successfully used as the emitter to gradually tune the emission colors of related solution-processed OLEDs from green to yellow. Furthermore, the electroluminescent efficiencies of these devices are unaffected or even increased during this process. Therefore, this work demonstrates a distinctive point of view and approach for modulating the emission colors of OLEDs, which may prove great inspiration for the fabrication of multi-colored OLEDs with only one emitter.

Indolo[3,2-a]carbazoles as Engineered Materials for Optoelectronic Applications: Synthesis, Structural Insights, and Computational Screening

The biological and medicinal importance of indolocarbazoles has been known for the past several decades. However, in recent times, these compounds have been emerging as potential candidates for optoelectronic applications, although several challenges are associated with their synthesis. We report here a Pd(II)-catalyzed process for the synthesis of indolo[3,2-a]carbazoles. The reaction proceeded under neat conditions and in the presence of aqueous nonmetallic oxidant TBHP, and the products were purified directly after the completion of the reaction. Also, the possibility of employing the present method for reaction with gram-scale feed was investigated. A detailed single-crystal analysis of several indolo[3,2-a]carbazoles revealed how the molecular arrangement can be tuned by altering the functionalization. Finally, the developed molecules were screened computationally to assess their potential for possible use as hole transport materials (HTMs) for organic light-emitting diodes (OLEDs).

Perovskite Light-Emitting Diodes with an External Quantum Efficiency Exceeding 30

Perovskite light-emitting diodes (PeLEDs) are strong candidates for next-generation display and lighting technologies due to their high color purity and low-cost solution-processed fabrication. However, PeLEDs are not superior to commercial organic light-emitting diodes (OLEDs) in efficiency, as some key parameters affecting their efficiency, such as the charge carrier transport and light outcoupling efficiency, are usually overlooked and not well optimized. Here, ultrahigh-efficiency green PeLEDs are reported with quantum efficiencies surpassing a milestone of 30% by regulating the charge carrier transport and near-field light distribution to reduce electron leakage and achieve a high light outcoupling efficiency of 41.82%. Ni0.9 Mg0.1 Ox films are applied with a high refractive index and increased hole carrier mobility as the hole injection layer to balance the charge carrier injection and insert the polyethylene glycol layer between the hole transport layer and the perovskite emissive layer to block the electron leakage and reduce the photon loss. Therefore, with the modified structure, the state-of-the-art green PeLEDs achieve a world record external quantum efficiency of 30.84% (average =  29.05 ± 0.77%) at a luminance of 6514 cd m-2 . This study provides an interesting idea to construct super high-efficiency PeLEDs by balancing the electron-hole recombination and enhancing the light outcoupling.

Forthcoming hyperfluorescence display technology: relevant factors to achieve high-performance stable organic light emitting diodes

Over the decade, there have been developments in purely organic thermally activated delayed fluorescent (TADF) materials for organic light-emitting diodes (OLEDs). However, achieving narrow full width at half maximum (FWHM) and high external quantum efficiency (EQE) is crucial for real display industries. To overcome these hurdles, hyperfluorescence (HF) technology was proposed for next-generation OLEDs. In this technology, the TADF material was considered a sensitizing host, the so-called TADF sensitized host (TSH), for use of triplet excitons via the reverse intersystem crossing (RISC) pathway. Since most of the TADF materials show bipolar characteristics, electrically generated singlet and triplet exciton energies can be transported to the final fluorescent emitter (FE) through Förster resonance energy transfer (FRET) rather than Dexter energy transfer (DET). This mechanism is possible from the S₁ state of the TSH to the S₁ state of the final fluorescent dopant (FD) as a long-range energy transfer. Considering this, some reports are available based on hyperfluorescence OLEDs, but the detailed analysis for highly efficient and stable devices for commercialization was unclear. So herein, we reviewed the relevant factors based on recent advancements to build a highly efficient and stable hyperfluorescence system. The factors include an energy transfer mechanism based on spectral overlapping, TSH requirements, electroluminescence study based on exciplex and polarity system, shielding effect, DET suppression, and FD orientation. Furthermore, the outlook and future positives with new directions were discussed to build high-performance OLEDs.

The design and synthesis of green emissive iridium(III) complexes guided by calculations of the vibrationally-resolved emission spectra

A key challenge in developing emissive materials for organic light-emitting diodes is to optimize their colour saturation, which means targeting narrowband emitters. In this combined theoretical and experimental study, we investigate the use of heavy atoms in the form of trimethylsilyl groups as a tool to reduce the intensity of the vibrations in the 2-phenylpyridinato ligands of emissive iridium(III) complexes that contribute to the vibrationally coupled modes that broaden the emission profile. An underutilised computational technique, Frank-Condon vibrationally coupled electronic spectral modelling, was used to identify the key vibrational modes that contribute to the broadening of the emission spectra in known benchmark green-emitting iridium(III) complexes. Based on these results, a family of eight new green-emitting iridium complexes containing trimethylsilyl groups substituted at different positions of the cyclometalating ligands has been prepared to explore the impact that these substituents have on reducing the intensity of the vibrations and the resulting reduction in the contribution of vibrationally coupled emission modes to the shape of the emission spectra. We have demonstrated that locating a trimethylsilyl group at the N4 or N5 position of the 2-phenylpyridine ligand damps the vibrational modes of the iridium complex and provides a modest narrowing of the emission spectrum of 8-9 nm (or 350 cm^-1). The strong correlation between experimental and calculated emission spectra highlights the utility of this computational method to understand how the vibrational modes contribute to the profile of the emission spectra in phosphorescent iridium(III) emitters.