One-Step Synthesis of White-Light-Emitting Carbon Dots for White LEDs with a High Color Rendering Index of 97

Dynamic Directional Ultrasonically In Situ-Generated N,S-Codoped Carbon Dots in Poly(ethylene glycol) for Improved Tribological Performance

The dispersion stability of nanomaterials in lubricants significantly influences tribological performance, yet their addition as lubricant additives often presents challenges in secondary dispersion. Here, we present a straightforward method for in situ preparation of N,S-codoped CDs (N,S-CDs)-based lubricants using heterocyclic aromatic hydrocarbons containing N/S elements in poly(ethylene glycol) (PEG) base oil by a directional ultrasound strategy. Two types of N,S-CDs were successfully prepared via the directional ultrasound treatment of PEG with benzothiazole (BTA) and benzothiadiazole (BTH) separately. The resultant N,S-CDs have a uniform distribution of N and S elements and maintain good colloidal dispersion stability in PEG even after 9 months of storage. The N,S-CDs can enter the surface gap of the friction pairs and then induce a tribochemical reaction. Benefiting from the synergistic effect of N and S activating elements, a robust and stable protective film consisting of iron sulfides, iron oxides, carbon nitrides, and amorphous carbonaceous compounds is formed, thus endowing N,S-CDs-based lubricants with improved antiwear and friction-reducing performance. Compared with pure PEG, the coefficient of friction (COF) of the N,S-CDs(BTH)-based lubricant decreased to 0.108 from 0.292, accompanied by a 91.2% reduction in wear volume, and the maximum load carrying capacity increased to 450 from 150 N.

Optimizations of luminescent materials for white light emitting diodes toward healthy lighting

White light emitting diodes (wLEDs) have been widely used as the green lighting sources. The commercial wLEDs devices are mainly achieved through the combination of blue emission chips and yellow phosphors, which offer advantages of high efficiency and long lifetime. However, the color rendering index (CRI) of traditional wLEDs is low due to the lack of red components. In recent years, with the improvement of the quality of life, a lot of efforts have been paid to improve the performance of wLEDs devices related to CRI, correlated color temperature, light uniformity, luminous flux, etc. In this article, we summarize the recent advances on the optimization of wLEDs toward healthy lighting. Brief introductions on the fundamentals of healthy effect of lighting are presented, followed by discussions of current methods to realize wLEDs devices. Special overviews on strategies for luminescent materials of wLEDs in recent years are presented. The opportunities and challenges in the future development of wLEDs lighting devices are also discussed.

One-step solvothermal synthesis of full-color fluorescent carbon dots for information encryption and anti-counterfeiting applications

Multicolor fluorescent carbon dots (CDs) have received extensive attention due to their excellent fluorescence tunable performance. In this study, multicolor CDs with color tunable and high fluorescence quantum yields (QYs) were successfully prepared under the same conditions by a one-step solvothermal method using 2-aminoterephthalic acid (ATA) and Nile Blue A (NBA) as reaction reagents, achieving a wide color field coverage. Detailed studies on the relevant mechanisms have been carried out for blue, green and red CDs, indicating that the regulating mechanism of multicolor luminescence is determined by the size of the sp2 conjugated domains, which is due to the increase of particle size that causes an increase in the size of the sp2 conjugated domains, resulting in the narrowing of the band gap and the red-shift of the emission wavelength. It was found that the CDs have the advantages of simple preparation, high photostability and high quantum yield. They were used as fluorescent ink and mixed with polyvinyl alcohol (PVA) to form CD/PVA composites, which were successfully applied in the field of information encryption and anti-counterfeiting. This work provides a new strategy for the synthesis of panchromatic tunable fluorescent CDs and their application in the field of information encryption and anti-counterfeiting.

High solid-state photoluminescence quantum yield of carbon-dot-derived molecular fluorophores for light-emitting devices

Several recent studies of carbon dots (CDs) synthesized by bottom-up methods under mild conditions have reported the presence of organic molecular fluorophores in CD dispersions. These fluorophores have a tendency to aggregate, and their properties strongly depend on whether they are present in the form of discrete molecules or aggregates. The aggregation becomes more prominent in the solid state, which motivates the study of the properties of the fluorophores associated with CDs in the solid state. Here, we report the solid-state characterization of N4,N11-dimethyldibenzo[a,h]phenazine-4,11-diamine (BPD) - a molecular fluorophore that forms CDs. Discrete BPD molecules show excitation-wavelength-independent photoluminescence (PL) emission in the green wavelength region at ∼520 nm. However, additional blue PL is also observed due to aggregation, making the PL emission significantly broad. For detailed studies, BPD is mixed in different solid matrices, and it is observed that the PL quantum yield (PLQY) of BPD films strongly depends on the concentration of BPD in the solid matrices. Increasing the concentration of BPD results in a considerable decrease in the PLQY. The PLQY of the films with an optimum concentration of BPD is 75.9% and 40.2% in polymethyl methacrylate and polystyrene, respectively. At higher concentrations, these PLQY values decrease to ∼11%. The significant decrease in the PLQY is ascribed to reabsorption and nonradiative exciton decay that is facilitated by BPD aggregation at higher concentrations. Finally, light-emitting devices (LEDs) were fabricated with almost pure white emission color, having CIE (International Commission on Illumination) coordinates of (0.35, 0.37) using BPD in the color-converting layer of blue-pumped LEDs. The device shows a luminous efficiency 3.8 lm W-1 and luminance of 43 331 cd m-2.

Polycarbonyl polymer with zincophilic sites as protective coating for highly reversible zinc metal anodes

The Zn anode of aqueous zinc ion batteries (AZIBs) have suffered from a series of rampant side reactions such as dendrite growth and corrosion, which seriously affect the reversibility and stability of Zn anodes. Herein, a polycarbonyl polymer poly(1,4,5,8-naphthalene tetracarboxylic anhydride anthraquinone) imine (PNAQI) as the protective coating is synthesized through a simple solvothermal method with the raw materials of the equimolar 1,4,5,8-naphthalenetetracarboxylic dianhydride (NTCDA) and 2, 6-aminoanthraquinone (2,6-DAAQ). A series of characterizations such as contact angle measurement and ex-situ XRD analysis confirm that it can effectively prevent some side reactions. Moreover, CO on PNAQI can regulate the uniform distribution of zinc, thereby preventing the occurrence of zinc dendrites. Finally, the PNAQI@Zn//PNAQI@Zn symmetrical cell demonstrates a long cycle life exceeding 1000 h at current density of 1.0 mA cm-2 and a capacity of 1.0 mAh cm-2. The result significantly outperforms the cycling performance of the cell with bare zinc anode. Especially, the full battery of PNAQI@Zn//NH4V4O10 demonstrates an excellent capacity retention and prolonged cycle life (96.9 mAh/g after 1000 cycles at 1.0 A/g) compared to Zn//NH4V4O10. This work provides an effective, simple and low-cost solution for developing high-performance AZIBs.

Carbon Dots: Synthesis, Characterizations, and Recent Advancements in Biomedical, Optoelectronics, Sensing, and Catalysis Applications

Carbon nanodots (CNDs), a fascinating carbon-based nanomaterial (typical size 2-10 nm) owing to their superior optical properties, high biocompatibility, and cell penetrability, have tremendous applications in different interdisciplinary fields. Here, in this Review, we first explore the superiority of CNDs over other nanomaterials in the biomedical, optoelectronics, analytical sensing, and photocatalysis domains. Beginning with synthesis, characterization, and purification techniques, we even address fundamental questions surrounding CNDs such as emission origin and excitation-dependent behavior. Then we explore recent advancements in their applications, focusing on biological/biomedical uses like specific organelle bioimaging, drug/gene delivery, biosensing, and photothermal therapy. In optoelectronics, we cover CND-based solar cells, perovskite solar cells, and their role in LEDs and WLEDs. Analytical sensing applications include the detection of metals, hazardous chemicals, and proteins. In catalysis, we examine roles in photocatalysis, CO2 reduction, water splitting, stereospecific synthesis, and pollutant degradation. With this Review, we intend to further spark interest in CNDs and CND-based composites by highlighting their many benefits across a wide range of applications.

Preparation of lignin-based full-color carbon quantum dots and their multifunctionalization with waterborne polyurethanes

Lignin is a popular material for energy transition and high-value utilization due to its low cost, non-toxicity, renewability, and widespread availability. However, its complex structure has hindered its application. Waterborne polyurethane (WPU) uses water as a dispersion medium, which is safer for humans and the environment but also leads to disadvantages such as poor mechanical properties and water resistance. In this study, we prepared multicolor photoluminescent carbon quantum dots (CQDs) in a wide range of wavelengths from lignin. We successfully prepared panchromatic CQDs by additive mixing. The redshift of the emission wavelength is attributed to the synergistic effect of the sp2 conjugated structure and the surface functional groups. The full-color solid-state luminescence of the CQDs was successfully achieved, and most importantly, the application of full-color CQDs in light-emitting diodes was realized. Moreover, the embedding of the multicolor CQDs in WPU not only makes WPU luminescent but also improves the water resistance and mechanical properties of WPUs. The hydrogen-bonding interactions between the functional groups on the surface of the CQDs and the urethane were responsible for the high performance of the composite. We investigated the UV and strong blue light shielding abilities of WPU/yellow CQDs films, which resulted from the unique absorption peaks of yellow CQDs in the UV region and the strong blue light region. This work provides an efficient method for the high-value utilization of biomass materials and paves the way for the multifunctional application of WPU.

A Bifunctional Luminescent Whitening and Sensing Material Based on Photoluminescence and Mechanoluminescence

A bifunctional luminescent whitening and luminescent sensing composite material, BaMgAl12O17:Eu2+/polydimethylsiloxane (BAM/PDMS), that utilizes natural sunlight and mechanical energy is presented. By increasing the Eu2+ content, the photoluminescence (PL) excitation spectrum of the material shows a maximum redshift of 23 nm due to 5d level splitting of Eu2+, resulting in more spectral overlap with sunlight and an excellent PL whitening effect. Meanwhile, the self-recoverable mechanoluminescence (ML) of the material can be easily excited under mechanical stimuli due to contact electrification, exhibiting a unique stress sensing effect. Based on the unique features of PL whitening and ML sensing, the material is applied to model cars through a spray process, and the results demonstrate that the bifunctional BAM/PDMS material shows promising applications in automobile decoration.

A multifunctional supramolecular assembly based on cucurbit[7]uril: White light material and Fe(CN)63- detection

White light emitting materials have broad application prospects in fields such as displays, lighting devices, etc., but developing such materials faces considerable challenges. In this study, 1,3,5-tris[4-(pyridine-4-butyl)phenyl]benzene derivative (BTPY) was synthesized and a supramolecular assembly with AIE properties named BTPY@Q[7] was prepared with cucurbit[7]uril (Q[7]). Furthermore, by adding rhodamine 6G (R6G) to it, and controlling its ratio with R6G, a dual-emission white light system (0.33, 0.33) was synthesized and used for white light emitting materials as well as anti-counterfeiting fields. In addition, based on the BTPY@Q[7]-R6G system, a light harvesting system in aqueous phase was constructed, with an energy transfer efficiency (ΦET) of 26.19 % and an antenna effect (AE) of 10.21. Interestingly, the supramolecular self-assembly can also be used as a fluorescent probe, specifically recognize Fe(CN)63- ions in water, with a detection limit of 2.5 × 10-8 M.

Solid-State, Hectogram-Scale Preparation of Red Carbon Dots as Phosphor for Energy-Transfer-Induced High-Quality White LEDs with CRI of 97

In this study, pre-crystallization-controlled, solid-state preparation of red carbon dots (C-dots) from o-phenylenediamine on a hectogram scale with a 94% yield is reported. Highly efficient red phosphor (C-dots@MCC) is obtained by dispersing the C-dots in microcrystalline cellulose, which matched extremely well with the commercial Y3 Al5 O12 :Ce3+ (YAG) phosphor. White light-emitting diodes (WLEDs) fabricated from the two phosphors emitted warm white light with a correlated color temperature of 3845 K, CIE color coordinates of (0.38, 0.37), and an extremely high color rendering index (CRI) of 95, outperforming all the reported YAG-derived WLEDs. Furthermore, the CRI value of the WLED can be further increased to 97 after fine-tuning, which is the highest CRI for WLEDs of any C-dots derived devices reported so far. The superior performance of the WLED is attributed to a delicate energy transfer between YAG and C-dots@MCC. Most importantly, the WLED maintained excellent stabilities under varied currents, working durations, moistures, and temperatures.

Distinguishable Colorimetric Biosensor for Diagnosis of Prostate Cancer Bone Metastases

Castration-resistant prostate cancer (PCa) causes severe bone metastasis (BM), which significantly increases mortality in men with PCa. Imaging tests and radiometric scanning require long analysis times, expensive equipment, specialized personnel, and a slow turnaround. New visualization technologies are expected to solve the above problems. Nonetheless, existing visualization techniques barely meet the urgency for precise diagnosis because the human eyes cannot recognize and capture even slight variations in visual information. By using dye differentiated superposition enhancement colorimetric biosensors, an effective method to diagnose prostate cancer bone metastases (PCa-BM) with excellent accuracy for naked-eye quantitative detection of alkaline phosphatase (ALP) is developed. The biomarker ALP specific hydrolytic product ascorbic acid can be detected by rhodamine derivatives (Rd) as gold nanobipyramids (Au NBPs) are deposited and grown. Color-recombining enhancement effects between Rd and Au NBPs significantly improved abundance. The 150 U L-1 threshold between normal and abnormal can be identified by color. And with color enhancement effect and double signal response, the ALP index is visually measured to diagnose PCa-BM and provide handy treatment recommendations. Additionally, the proposed colorimetric sensing strategy can be used to diagnose other diseases.

Superior white electroluminescent devices using nitrogen-doped carbon dots/TiO2nanorods heterostructures

Nitrogen-doped carbon dots (NCDs), exhibiting strong yellow emission in aqueous solution and solid matrices, have been utilized for fabricating heterostructure white electroluminescence devices. These devices consist of nitrogen-doped carbon dots as an emissive layer sandwiched between an organic hole transport layer (PEDOT:PSS) and an array of rutile TiO2nanorods, acting as an electron transport layer. Under an applied forward bias of 5 V, the device exhibits broadband electroluminescence covering the wavelength range of 390-900 nm, resulting in pure white light emission characteristics at room temperature. The result demonstrates the successful fabrication of all solution-processed, low-cost, eco-friendly NCDs-based LEDs with CIE (Commission Internationale d'Éclairage) coordinate of (0.31, 0.34) and color rendering index (CRI) > 90, which are close to ideal white light emission characteristics. The device functionalities are achieved based on defect-related NIR emission from TiO2nanorods array and visible emission from nitrogen-doped carbon dots. This result paves a new opportunity to develop low-cost, solution-processed nitrogen-doped carbon dots based on warm White light emitting diodes with high CRI for large-area display and lighting applications.

Synthetic strategies, properties and sensing application of multicolor carbon dots: recent advances and future challenges

Recently, carbon dots (CDs) as newly developed carbon-based nanomaterials due to advantages such as excellent photostability and easy surface functionalization have generated wide application prospects in fields such as biological imaging and chemical sensing. The multicolor emission carbon dots (M-CDs) were acquired through the selection of different carbon source precursors, change of synthesis conditions and synthesis environment. Therefore, the aim of this review is to summarize the latest research progress in polychromatic CDs from the perspectives of synthesis strategies, luminescent mechanisms, luminescent properties and applications. This review focuses on how to prepare MCDs by changing raw materials and synthesis conditions such as reaction temperature, synthesis time, synthesis pH, and synthesis solvent. This review also presents the optical properties of MCDs, concentration effects, solvent effects, pH effects, elemental doping, and surface passivation on them, as well as their creative applications in the field of sensing applications. It is anticipated that this review will serve as a guide for the development of multifunctional M-CDs and inspire future research on controllable design and preparation of M-CDs.