Tuning Hydrophilicity of Aluminum MOFs by a Mixed-Linker Strategy for Enhanced Performance in Water Adsorption-Driven Heat Allocation Application

Design of Mixed-Metal MOF-74-MgNi for Water Adsorption-Driven Solar Thermal Energy Storage and Heat Transformation Applications

Adsorption solar thermal energy storage and heat transformation are ecologically benign and energy-efficient technologies. Efficient adsorbents are the key to this technology. In this paper, two metal ions, Mg2+ and Ni2+, were introduced into the metal-organic framework MOF-74. The synthesis conditions were adjusted to obtain MOF-74 with a high water adsorption capacity and stability. The results show that MOF-74-MgNi-2 has the maximum water adsorption capacity. At a low moisture pressure P/P0 = 0.1, its water adsorption capacity is 0.44 g/g, 0.12 g/g, and 0.10 g/g greater than that of MOF-74-Mg and MOF-74-Ni, respectively. Its saturated water adsorption capacity at P/P0 = 0.9 is as high as 0.62 g/g, which is 1.3 times that of MOF-74-Ni and 1.1 times that of MOF-74-Mg, respectively. Its superior water adsorption capacity is explained by the combination of experiment and molecular simulation, which takes into account the pore structure and electrostatic potential energy distribution. Its thermal breakdown temperature is greater than 250 °C. Its water adsorption capacity decreases by only 9.0% in the 10th cycle. Under conventional refrigeration conditions, its refrigeration coefficient and working capacity are 0.75 and 0.43 cm3/cm3, respectively, which are greater than those of the majority of the regularly used adsorbents. In addition, it satisfies the primary technological goals of adsorption-based thermal batteries with a heat storage capacity of up to 1394 kJ/kg. The mixed-metal method is shown to be useful in the design of high-performance MOF-74 for solar thermal energy storage and heat transformation.

Freeze-Cast MIL-53(Al) Porous Materials with High Thermal Insulation and Flame Retardant Properties

The development of materials with superior thermal insulation and flame retardancy is critical for industrial applications and daily life. Metal-organic framework (MOF)@poly(vinyl alcohol) (PVA) (MOF@PVA) aerogel composites have demonstrated remarkable thermal insulation and flame retardancy properties. In this work, MIL-53(Al) was directly mixed with PVA and formed by freeze-drying, and the influence of the pore structure on the thermal insulation and flame retardancy properties of the materials was investigated. The incorporated MIL-53(Al) nanoparticles introduced abundant micro- and mesopores, enhancing the complexity of the pore structure and improving the thermal insulation and flame retardancy properties of the aerogels. The directionally freeze-cast aerogel achieved a thermal conductivity of 0.040 W·mK-1, and maintained excellent thermal insulation ability even at 220 °C. Furthermore, the aerogel exhibited nonflammable and self-extinguishing characteristics. This environmentally friendly manufacturing method provides new ideas for the design of MOF-based composites, thereby expanding their application areas.

Symbiotic defect-reinforced bimetallic MOF-derived fiber components for solar-assisted atmospheric water collection

Conversion of atmospheric water to sustainable and clean freshwater resources through MOF-based adsorbent has great potential for the renewable environmental industry. However, its daily water production is hampered by susceptibility to agglomeration, slow water evaporation efficiency, and limited water-harvesting capacity. Herein, a solar-assisted bimetallic MOF (BMOF)-derived fiber component that surmounts these limitations and exhibits both optimized water-collect capacity and short adsorption-desorption period is proposed. The proposed strategy involves utilizing bottom-up interface-induced assembly between carboxylated multi-walled carbon nanotube and hygroscopic BMOF on a multi-ply glass fiber support. The designed BMOF (MIL-100(Fe,Al)-3) skeleton constructed using bimetallic-node defect engineering exhibits a high specific surface area (1,535.28 m2/g) and pore volume (0.76 cm3/g), thereby surpassing the parent MOFs and other reported MOFs in capturing moisture. Benefiting from the hierarchical structure of fiber rods and the solar-driven self-heating interface of photothermal layer, the customized BMOF crystals realize efficient loading and optimized water adsorption-desorption kinetics. As a result, the resultant fiber components achieve six adsorption-desorption cycles per day and an impressive water collection of 1.45 g/g/day under medium-high humidity outdoor conditions. Therefore, this work will provide new ideas for optimizing the daily yield of atmospheric water harvesting techniques.

Engineered Nanoporous Frameworks for Adsorption Cooling Applications

The energy demand for traditional vapor-compressed technology for space cooling continues to soar year after year due to global warming and the increasing human population's need to improve living and working conditions. Thus, there is a growing demand for eco-friendly technologies that use sustainable or waste energy resources. This review discusses the properties of various refrigerants used for adsorption cooling applications followed by a brief discussion on the thermodynamic cycle. Next, sorbents traditionally used for cooling are reviewed to emphasize the need for advanced capture materials with superior properties to improve refrigerant sorption. The remainder of the review focus on studies using engineered nanoporous frameworks (ENFs) with various refrigerants for adsorption cooling applications. The effects of the various factors that play a role in ENF-refrigerant pair selection, including pore structure/dimension/shape, morphology, open-metal sites, pore chemistry and possible presence of defects, are reviewed. Next, in-depth insights into the sorbent-refrigerant interaction, and pore filling mechanism gained through a combination of characterization techniques and computational modeling are discussed. Finally, we outline the challenges and opportunities related to using ENFs for adsorption cooling applications and provide our views on the future of this technology.

Tunable Low-Pressure Water Adsorption in Stable Multivariate Metal-Organic Frameworks for Boosting Water-Based Ultralow-Temperature-Driven Refrigeration

The green water-based adsorption refrigeration is considered as a promising strategy to realize near-zero-carbon cooling applications. Although many metal-organic frameworks (MOFs) have been developed as water adsorbents, their cooling performance are commonly limited by the insufficient water uptakes below P/P0 = 0.2. Herein, the development of multivariate MOFs (MTV-MOFs) is reported to highly modulate and boost the low-pressure water uptake for improving coefficient of performance (COP) for refrigeration. Through ligand exchange in the pristine MIL-125-NH2 , a series of MTV-MOFs with bare nitrogen sites are designed and synthesized. The resulting MIL-125-NH2 /MD-5% exhibits the significantly improved water uptake of 0.39 g g-1 at 298 K and P/P0 = 0.2, which is three times higher than MIL-125-NH2 (0.12 g g-1 ) and comparable to some benchmark materials including KMF-1 (0.4 g g-1 ) and MIP-200 (0.36 g g-1 ). Combined with its low-temperature regeneration, fast sorption kinetics and high stability, MIL-125-NH2 /MD-5% achieves one of the highest COP values (0.8) and working capacities (0.24 g g-1 ) for refrig-2 under an ultralow-driven temperature of 65 °C, which are higher than some best-performing MOFs such as MIP-200 (0.74 and 0.11 g g-1 ) and KMF-2 (0.62 and 0.16 g g-1 ), making it among the best adsorbents for efficient ultralow-temperature-driven refrigeration.

Shaping the Water-Harvesting Behavior of Metal-Organic Frameworks Aided by Fine-Tuned GPT Models

We construct a data set of metal-organic framework (MOF) linkers and employ a fine-tuned GPT assistant to propose MOF linker designs by mutating and modifying the existing linker structures. This strategy allows the GPT model to learn the intricate language of chemistry in molecular representations, thereby achieving an enhanced accuracy in generating linker structures compared with its base models. Aiming to highlight the significance of linker design strategies in advancing the discovery of water-harvesting MOFs, we conducted a systematic MOF variant expansion upon state-of-the-art MOF-303 utilizing a multidimensional approach that integrates linker extension with multivariate tuning strategies. We synthesized a series of isoreticular aluminum MOFs, termed Long-Arm MOFs (LAMOF-1 to LAMOF-10), featuring linkers that bear various combinations of heteroatoms in their five-membered ring moiety, replacing pyrazole with either thiophene, furan, or thiazole rings or a combination of two. Beyond their consistent and robust architecture, as demonstrated by permanent porosity and thermal stability, the LAMOF series offers a generalizable synthesis strategy. Importantly, these 10 LAMOFs establish new benchmarks for water uptake (up to 0.64 g g-1) and operational humidity ranges (between 13 and 53%), thereby expanding the diversity of water-harvesting MOFs.