Recent Progress of the Design and Engineering of Bismuth Oxyhalides for Photocatalytic Nitrogen Fixation

Designed Nanoarchitectures of a BiOBr/BiOI Nanosheet Heterojunction Anchored on Dendritic Fibrous Nanosilica as Visible-Light Responsive Photocatalysts

Heterojunctions, particularly those involving BiOBr/BiOI, have attracted significant attention in the field of photocatalysis due to their remarkable properties. In this study, a unique architecture of BiOBr/BiOI was designed to facilitate the rapid transfer of electrons and holes, effectively mitigating the recombination of electron-hole pairs. Accordingly, the BiOBr/BiOI nanosheet heterojunction was anchored on dendritic fibrous nanosilica (DFNS) by the immobilization of Bi2O3 nanodots in DFNS and the subsequent reaction with HBr and then HI vapors at room temperature. The 4 nm-Bi2O3 nanodots acted as a sacrificial template to form BiOX nanosheets by reaction with HX vapors (X = Br, I). The BiOBr/BiOI nanosheet heterojunction with the lateral size remained in the range of 90 to 110 nm and a thickness of 15 nm formed on DFNS, where the BiOBr:BiOI ratio in the product was controlled by the exposure time to HX vapors. The reaction sequence (HBr → HI vapors) was a key for the formation of BiOBr/BiOI nanosheet heterojunction with controlled composition. When the reaction of Bi2O3 nanodots with HI vapor was performed in the reverse sequence (HI→ HBr), the substitution of I- with Br- occurred to form BiOBr sheets on DFNS. The BiOBr/BiOI nanosheet heterojunction anchored on DFNS was used as a visible-light-driven photocatalyst for the decomposition of benzene in water under solar light, and its activity was superior to that of single BiOX nanosheets on DFNS.

Enhanced artificial nitrogen fixation efficiency induced by construction of ternary TiO2/MIL-88A(Fe)/g-C3N4 Z-scheme heterojunction

Herein, a ternary TiO₂/MIL-88A(Fe)/g-C₃N₄ heterojunction is successfully constructed through a facile hydrothermal strategy for enhancing solar energy harvesting and efficiency of catalytic nitrogen reduction induced by enlarged light absorption range, increasing interfacial charge transfer ability and desirable stability. Under the simulated sunlight irradiation, the N₂ fixation experiment shows that the yield of NH₃ reaches 1084.31 μmol/(g·h) over the TiO₂/MIL-88A(Fe)/g-C₃N₄ photocatalyst, and the yield is significantly enhanced, which is 33.68 and 13.94 times that is higher than the pure TiO₂ and g-C₃N₄, respectively. In a mean time, the excellent performance of the photocatalytic N₂ fixation over the ternary TiO₂/MIL-88A(Fe)/g-C₃N₄ is verified based on density function theory calculation and the decisive step over the composite is investigated by calculating Gibbs free energies of nitrogen reduction paths. The performance enhancement mechanism of TiO₂/MIL-88A(Fe)/g-C₃N₄ is speculated, which indicates that the hybridized three-component system presents a desirable Z-scheme band alignment, resulting in the improvement of separation and transfer efficiency of photoinduced charge carriers. The article shows a new and high-efficiency TiO₂/MIL-88A(Fe)/g-C₃N₄ photocatalysis for excellent nitrogen reduction ability.

One-step fabrication of Cu-doped Bi2MoO6 microflower for enhancing performance in photocatalytic nitrogen fixation

This study enhances the photocatalytic N₂ immobilization performance of Bi₂MoO₆ through Cu doping. Cu-doped Bi₂MoO₆ was synthesized via a simple solvothermal method. Various characterizations were implemented to examine the influence of Cu doping on the properties of Bi₂MoO₆. Results indicated that the doped Cu element had a valence state of + 2 and substituted the position of Bi³⁺. Cu doping exerted minimal effect on the morphology of Bi₂MoO₆ but largely influenced the energy band structure. The band gap was slightly narrowed, and the conduction band was raised, such that Cu-doped Bi₂MoO₆ could generate more electrons with stronger reducibility. Moreover, importantly, Cu doping reduced work function and improved charge separation efficiency, which was considered the major cause of enhanced photoactivity. In addition, the Cu-Bi₂MoO₆ catalyst exhibited higher capability in the adsorption and activation of N₂. Under the combined effects of the aforementioned changes, Cu-Bi₂MoO₆ demonstrated considerably higher photocatalytic efficiency than Bi₂MoO₆. The optimized NH₃ generation rate reached 302 μmol/L g^-1h^-1 and 157 μmol/L g^-1h^-1 under simulated solar light and visible light, respectively, both achieving about 2.2 times higher than that of Bi₂MoO₆. This work provides a successful example of improving photocatalytic N₂ fixation, and it may show some light on the design and preparation of heteroatom-doped semiconductor photocatalysts for N₂-to-NH₃ conversion.

Water-resistant organic-inorganic hybrid perovskite quantum dots activated by the electron-deficient d-orbital of platinum atoms for nitrogen fixation

Due to their special physicochemical properties, organic-inorganic hybrid perovskite quantum dots (OIP QDs) are ideal and potential catalysts for the nitrogen reduction reaction (NRR). However, the OIP QD-based NRR is limited by poor water resistance, competitive suppression by the hydrogen evolution reaction, and inefficient active sites on the catalyst surfaces. Herein, to ensure an efficient NRR in aqueous solution, a water-resistant polycarbonate-part-encapsulated heterojunction of Zn,Pt^IV co-doped PbO-MAPbBr₃ (Pt^IV/Zn/PbO/PC-Zn/MAPbBr₃) is prepared through one-step electrospray-based microdroplet synthesis. Confirmed by both experimental and theoretical examinations, PbO is exposed on the PC-part-encapsulated surface to construct a Type I heterojunction. This heterojunction is further improved by synergistic co-doping with Pt^IV to facilitate efficient electron transfer for efficient photocatalysis of the NRR. Due to the active sites of the d-orbital electron-deficient Pt atoms (exhibiting a lower reaction energy barrier and highly selective N₂ adsorption), the ammonia yield rate is 40 times higher than that without doping. This work initiates and develops on the application of OIP QDs in the NRR.

Structural Transformation of Heterogeneous Materials for Electrocatalytic Oxygen Evolution Reaction

Electrochemical water splitting for hydrogen generation is a promising pathway for renewable energy conversion and storage. One of the most important issues for efficient water splitting is to develop cost-effective and highly efficient electrocatalysts to drive sluggish oxygen-evolution reaction (OER) at the anode side. Notably, structural transformation such as surface oxidation of metals or metal nonoxide compounds and surface amorphization of some metal oxides during OER have attracted growing attention in recent years. The investigation of structural transformation in OER will contribute to the in-depth understanding of accurate catalytic mechanisms and will finally benefit the rational design of catalytic materials with high activity. In this Review, we provide an overview of heterogeneous materials with obvious structural transformation during OER electrocatalysis. To gain insight into the essence of structural transformation, we summarize the driving forces and critical factors that affect the transformation process. In addition, advanced techniques that are used to probe chemical states and atomic structures of transformed surfaces are also introduced. We then discuss the structure of active species and the relationship between catalytic performance and structural properties of transformed materials. Finally, the challenges and prospects of heterogeneous OER electrocatalysis are presented.