Synthesis of the artemisinin-imprinting polymers on silica surface and its adsorption behavior in supercritical CO2 fluid

Three-Dimensional Porous PVDF Foam Imprinted Membranes with High Flux and Selectivity toward Artemisinin/Artemether

In this study, a new 3D porous PVDF-foam-imprinted membrane (PPIM) for the selective separation of artemisinin (ART) was first prepared via the dopamine adhesion of pre-synthesized MIPs into the interior of the PPIM. In the PPIM, the pre-synthesized molecularly imprinted polymers (MIPs) with artesunate (ARU) as a dummy template were uniformly loaded on the interior of the membrane, avoiding the defects of recognition site encapsulation found in the conventional membrane. This membrane also exhibited excellent flux, which is beneficial in practical separation applications. The PPIM was systematically characterized via FT-IR, SEM, pore-size distribution analysis, water contact angle test, membrane flux, and mechanical performance analysis, respectively. In the static adsorption experiment, the pseudo-second-order kinetic model better fitted the rebinding data of ART. Under dynamic conditions, the ART adsorption capacity of the PPIM could be further remarkably improved by tailoring the flow rate to 3 mL min-1. In the selective separation experiment, with artemether (ARE) as the competition substrate, the selective separation ability (α) of the PPIM towards ART/artemether (ARE) reached its peak value (3.16) within only 10 min at this flow rate, which is higher than that of porous PVDF foam non-imprinted membranes (PPNM) (ca. 1.5), showing great separation efficiency in a short time. Moreover, the PPIM can be reused five times without a significant decrease in its adsorption capacities, showing good regeneration performance. This work highlights a simple strategy for constructing new MIMs with high flux and great mechanical strength to achieve the efficient selective separation of ART and ARE in practical applications.

Separation and enrichment of sibiskoside from Sibiraea angustat with magnetic surface dummy template molecularly imprinted polymers

In this work, a novel strategy was developed for separation and enrichment of sibiskoside by dummy molecular imprinting technology and magnetic separation technology. The structural analogue geniposide was selected as the dummy template, using 4-vinylpyridine as the functional monomer, ethylene glycol dimethacrylate as the cross-linking agent, and acetonitrile as the porogen. The molecularly imprinted layer was formed on the surface of the magnetic carrier to prepare dummy template molecularly imprinted polymers (DMIPs) with a core-shell structure. The DMIPs were characterized by scanning electron microscope (SEM), Fourier transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA) and Vibration sample magnetometer (VSM). The results of adsorption kinetics experiments and isothermal adsorption experiments showed that DMIPs can reach adsorption equilibrium in a short period of time and the maximum adsorption capacity can reach 14.67 mg/g. The imprinting factor was 2.08. Compared with the andrographolide, polydatin, arbutin, caffeic acid, neohesperidin dihydrochalcone and quercetin, DMIPs have good adsorption capacity for the sibiskoside. And the reusability was better. After the adsorption of DMIPs, the purity of sibiskoside in the crude extracts from Sibiraea angustata increased to 78%. It provided a basis for the further development and utilization of Sibiraea angustata as well as the separation and enrichment of monoterpenes.

Fabrication and evaluation of artemisinin-imprinted composite membranes by developing a surface functional monomer-directing prepolymerization system

Inspired by a surface functional monomer-directing prepolymerization system, a straightforward and effective synthesis method was first developed to prepare highly regenerate and perm-selective molecularly imprinted composite membranes of artemisinin (Ars) molecules. Attributing to the formation of the prepolymerization system, Ars molecules are attracted and bound to the membrane surface, hence promoting the growth of homogeneous and high-density molecular recognition sites on the surface of membrane materials. Afterward, a two-step-temperature imprinting procedure was carried out to prepare the novel surface functional monomer capping molecularly imprinted membranes (FMIMs). The as-prepared FMIMs not only exhibited highly adsorption capacity (11.91 mg g(-1)) but also showed an outstanding specific selectivity (imprinting factor α is 4.50) and excellent perm-selectivity ability (separation factor β is 10.60) toward Ars molecules, which is promising for Ars separation and purification.

Molecular imprinting science and technology: a survey of the literature for the years 2004-2011

Herein, we present a survey of the literature covering the development of molecular imprinting science and technology over the years 2004-2011. In total, 3779 references to the original papers, reviews, edited volumes and monographs from this period are included, along with recently identified uncited materials from prior to 2004, which were omitted in the first instalment of this series covering the years 1930-2003. In the presentation of the assembled references, a section presenting reviews and monographs covering the area is followed by sections describing fundamental aspects of molecular imprinting including the development of novel polymer formats. Thereafter, literature describing efforts to apply these polymeric materials to a range of application areas is presented. Current trends and areas of rapid development are discussed.