Pervaporation as a Successful Tool in the Treatment of Industrial Liquid Mixtures

Pervaporation is one of the most active topics in membrane research, and it has time and again proven to be an essential component for chemical separation. It has been employed in the removal of impurities from raw materials, separation of products and by-products after reaction, and separation of pollutants from water. Given the global problem of water pollution, this approach is efficient in removing hazardous substances from water bodies. Conventional processes are based on thermodynamic equilibria involving a phase transition such as distillation and liquid-liquid extraction. These techniques have a relatively low efficacy and nowadays they are not recommended because it is not sustainable in terms of energy consumption and/or waste generation. Pervaporation emerged in the 1980s and is now becoming a popular membrane separation technology because of its intrinsic features such as low energy requirements, cheap separation costs, and good quality product output. The focus of this review is on current developments in pervaporation, mass transport in membranes, material selection, fabrication and characterization techniques, and applications of various membranes in the separation of chemicals from water.

Synthesis of Transparent Aqueous ZrO2 Nanodispersion with a Controllable Crystalline Phase without Modification for a High-Refractive-Index Nanocomposite Film

The controllable synthesis of metal oxide nanoparticles is of fundamental and technological interest. In this article, highly transparent aqueous nanodispersion of ZrO₂ with controllable crystalline phase, high concentration, and long-term stability was facilely prepared without any modification via the reaction of inexpensive inorganic zirconium salt and sodium hydroxide in water under an acid surrounding, combined with hydrothermal treatment. The as-prepared transparent nanodispersion had an average particle size of 7 nm, a high stability of 18 months, and a high solid content of 35 wt %. ZrO₂ nanocrystals could be readily dispersed in many solvents with high polarity including ethanol, dimethyl sulfoxide, acetic acid, ethylene glycol, and N, N-dimethylformamide, forming stable transparent nanodispersions. Furthermore, highly transparent polyvinyl alcohol/ZrO₂ nanocomposite films with high refractive index were successfully prepared with a simple solution mixing route. The refractive index could be tuned from 1.528 to 1.754 (@ 589 nm) by changing the mass fraction (0-80 wt %) of ZrO₂ in transparent nanocomposite films.

Surface-modification of poly(dimethylsiloxane) membrane with self-assembled monolayers for alcohol permselective pervaporation

The use of self-assembled monolayers (SAMs) has recently been recognized as an effective way to tailor the surface properties of films used in various applications. However, application of SAMs in the preparation of separation membranes remains unexplored. In the present study, surface-modified poly(dimethylsiloxane) (PDMS) membranes were prepared using SAMs to fabricate a membrane for use in pervaporation separation of ethanol/water mixtures. A cross-linked PDMS/polysulfone (PSf) composite membrane was transformed by introducing hydroxyl functionalities on the PDMS surface through a UV/ozone conversion process. (Tridecafluoroctyl)triethoxysilane was allowed to be adsorbed on the resulting Si-OH substrate to increase the hydrophobicity of the membrane. Results from Fourier transform infrared spectroscopy, scanning electron microscopy, energy-dispersive X-ray spectrometry, atomic force microscopy, and contact angle analyses suggest that the fluoroalkylsilane monolayer was successfully formed on the modified PDMS/PSf membrane treated by 60 min UV/ozone exposure. The newly SAM-modified membrane exhibited a separation factor of 13.1 and a permeate flux of 412.9 g/(m(2) h), which are higher than those obtained from PDMS membranes.