Model construction and theoretical evaluation of the performance improvement of acetone-butanol-ethanol extractive fermentation by adding surfactant

Severe butanol toxicity to the metabolism of solventogenic clostridia significantly impede the application of fermentative butanol as a biofuel. Liquid-liquid extraction is an efficient method to reduce the butanol toxicity by in-situ removing it in the extractant phase. Butanol mass transfer into extractant phase in static acetone-butanol-ethanol (ABE) extractive fermentation with biodiesel as the extractant could be enhanced by adding a tiny amount of surfactant such as tween-80. In the case of corn-based ABE extractive fermentation by Clostridium acetobutylicum ATCC 824 using biodiesel originated from waste cooking oil as extractant, addition of 0.14% (w/v) tween-80 could increase butanol production in biodiesel and total solvents production by 21% and 17%, respectively, compared to those of control under non-surfactant existence. Furthermore, a mathematical model was developed to elucidate the mechanism of enhanced ABE extractive fermentation performance. The results indicated that the mass transfer improvement was obtained by effectively altering the physical properties of the self-generated bubbles during ABE extractive fermentation, such as reducing bubble size and extending its retention time in extractant phase, etc. Overall, this study provided an efficient approach for enhancing biobutanol production by integration of bioprocess optimization and model interpretation.

An alternative technique for determining the number density of acoustic cavitation bubbles in sonochemical reactors

The present paper introduces a novel semi-empirical technique for the determination of active bubbles' number in sonicated solutions. This method links the chemistry of a single bubble to that taking place over the whole sonochemical reactor (solution). The probe compound is CCl₄, where its eliminated amount within a single bubble (though pyrolysis) is determined via a cavitation model which takes into account the non-equilibrium condensation/evaporation of water vapor and heat exchange across the bubble wall, reactions heats and liquid compressibility and viscosity, all along the bubble oscillation under the temporal perturbation of the ultrasonic wave. The CCl₄ degradation data in aqueous solution (available in literature) are used to determine the number density through dividing the degradation yield of CCl₄ to that predicted by a single bubble model (at the same experimental condition of the aqueous data). The impact of ultrasonic frequency on the number density of bubbles is shown and compared with data from the literature, where a high level of consistency is found.

Recent Advances in Fly-Ash-Based Geopolymers: Potential on the Utilization for Sustainable Environmental Remediation

This Mini-Review provides the fundamentals and the state-of-the-art overview on geopolymers, novel inorganic polymeric materials (also known as alkali-bounded ceramics), synthesized from aluminosilicate sources and explores their current and potential sustainable environmental applications. It summarizes and examines concisely the recent scientific advances on geopolymers widely synthesized from abundantly available fly-ash-based aluminosilicate materials via alkaline activation at relatively low temperatures. Although geopolymerization is not a new concept and has offered valuable solutions to some environmental challenges as a low-cost and environmentally benign alternative to conventional energy-intensive Portland cement-based construction materials and has also been used as a barrier in immobilizing toxic and radioactive metals, the application of this technology to produce effective adsorptive materials for mitigation of liquid- and gas-phase contaminants is relatively recent. The valorization of the fly-ash waste in the sustainable and cost-effective development of geopolymeric adsorbents and catalysts for the treatment and control of environmental contaminants and energy production and storage could lead to many economic benefits due to the low cost and resource recycling of this globally abundant raw material. Perspectives on the synthesis and utilization of new geopolymer-based adsorbents for environmental and energy applications with insights into future research directions, prospects, and challenges for economic large-scale production are addressed.

Novel Simultaneous Removal Technology of NO and SO2 Using a Semi-Dry Microwave Activation Persulfate System

As it has a simple system and a small floor area, flue gas simultaneous desulfurization and denitrification technology has a good development prospect, and related research has become a hot topic in the field of flue gas purification. In this work, a novel simultaneous removal technology of NO and SO₂ from flue gas using a semi-dry microwave activation persulfate system was developed for the first time. A series of experiments and characterization analyses had been implemented to research the feasibility of this new flue gas purification technology. The oxidation products, free radicals, and mechanism of NO and SO₂ simultaneous removal were revealed. The effect of the main technological parameters on NO and SO₂ simultaneous removal was also studied. Relevant results demonstrated that an increase in the microwave radiation power, persulfate concentration, and O₂ concentration enhanced NO and SO₂ simultaneous removal. The increase of NO and SO₂ concentrations weakened NO and SO₂ simultaneous removal. The reagent dosage, pH value of the solution, and reaction temperature showed a dual influence on NO and SO₂ simultaneous removal. Free-radical capture experiments revealed that both SO₄^-• and ^•OH that were produced by microwave activation of persulfate were the major active species and played very key roles in NO and SO₂ simultaneous removal. The main products (sulfate and nitrate) and byproducts (NO₂) in the tail gas were found. The process application and product post-treatment routes were also proposed. The result may provide the necessary inspiration and guidance for the development and application of microwave-activated advanced oxidation technology in the flue gas treatment area.

An experimental study on the simultaneous removal of NO and SO2 with a new wet recycling process based on the micro-nano bubble water system

The micronano bubble water system (MNBW) generated by a micronano bubble generator (MNBG) has the superior oxidation properties and can improve gas solubility. In the study, a new wet recycling process based on MNBW is proposed to simultaneously remove nitric oxide (NO) and sulfur dioxide (SO₂). The important experimental parameters such as initial water pH, initial water temperature, NO and SO₂ concentrations, and the presence of oxygen (O₂) were investigated to explore the feasibility of desulfurization and denitration with MNBW. The experimental results showed that decreasing initial water pH or increasing initial water temperature and NO and SO₂ concentrations were not conducive to the removal of NO or SO₂. O₂ could promote the removal of NO, but it had no effect on SO₂ removal. In addition, SO₂ removal efficiency always remained high and did not change obviously during the experimental period. However, NO removal efficiency gradually decreased in the first 50 min and then became stable.

Simultaneous NO and SO2 removal by aqueous persulfate activated by combined heat and Fe2+: experimental and kinetic mass transfer model studies

This study evaluates the chemistry, kinetics, and mass transfer aspects of the removal of NO and SO₂ simultaneously from flue gas induced by the combined heat and Fe²⁺ activation of aqueous persulfate. The work involves experimental studies and the development of a mathematical model utilizing a comprehensive reaction scheme for detailed process evaluation, and to validate the results of an experimental study at 30-70 °C, which demonstrated that both SO₂ and Fe²⁺ improved NO removal, while the SO₂ is almost completely removed. The model was used to correlate experimental data, predict reaction species and nitrogen-sulfur (N-S) product concentrations, to obtain new kinetic data, and to estimate mass transfer coefficient (K_La) for NO and SO₂ at different temperatures. The model percent conversion results appear to fit the data remarkably well for both NO and SO₂ in the temperature range of 30-70 °C. The conversions ranged from 43.2 to 76.5% and 98.9 to 98.1% for NO and SO₂, respectively, in the 30-70 °C range. The model predictions at the higher temperature of 90 °C were 90.0 and 97.4% for NO and SO₂, respectively. The model also predicted decrease in K_La for SO₂ of 1.097 × 10^-4 to 8.88 × 10^-5 s^-1 (30-90 °C) and decrease in K_La for NO of 4.79 × 10^-2 to 3.67 × 10^-2 s^-1 (30-50 °C) but increase of 4.36 × 10^-2 to 4.90 × 10^-2 s^-1 at higher temperatures (70-90 °C). This emerging sulfate-radical-based process could be applied to the treatment of flue gases from combustion sources. Graphical abstract.

Simultaneous removal of nitrogen oxides and sulfur dioxide using ultrasonically atomized hydrogen peroxide

A new method was developed for denitrification and desulfurization using hydrogen peroxide with the aid of an ultrasonic nebulizer to obtain high removal efficiency of NOx and SO₂. Comparing with the atomizing nozzles having the aperture size of 0.01~0.02 mm, the droplets generated using the ultrasonic nebulizer show the smallest d₅₀ value of 7.2 μm, with 72% possessing the size less than 10 μm. Based on the numerical simulation of the vaporization rate of droplets, it is indicated that the droplets with the size of 7.2 μm can be vaporized totally at very short residence time (0.11 s) under 130 °C. Effects of influence factors including the reaction temperature, the initial H₂O₂ concentration, pH value, and the flue gas flow rate were studied on the removal efficiencies of NO and SO₂. Using the in-series double-oxidation subsystems with H₂O₂ concentration of 6 wt%, pH 5.0, and the reaction temperature of 130 °C, the removal efficiencies of SO₂ and NO are respectively 100% and 89.3% at the short residence time of 1.8 s, and the removal efficiency of NO can be increased to 100% as the residence time is longer than 3.7 s. It is confirmed that the ultrasonically atomized H₂O₂ can indeed enhance the removal efficiencies of NO and SO₂ at the optimal temperature, owing to the fast vaporization rate of fine droplets as well as the formation of more active radicals to be captured by NO and SO₂ simultaneously. The results here provide a promising route to remove effectively the emissions of NO and SO₂ simultaneously. Graphical abstract.

Removal of multi-pollutant from flue gas utilizing ammonium persulfate solution catalyzed by Fe/ZSM-5

A nano-sized iron loaded ZSM-5 zeolite (Fe/ZSM-5) catalyst was firstly used to activate (NH₄)₂S₂O₈ solution for the simultaneous removal of multi-pollutant from flue gas. The simultaneous removal efficiencies 100% of SO₂, 72.6% of NO and 93.4% of Hg° were achieved under the condition that the catalyst dose was 0.8 g/L, concentration, pH and temperature of (NH₄)₂S₂O₈ solution were 0.03 mol/L, 5 and 65 °C, respectively. The stability of catalyst was checked by a continuous test, proving that the catalytic activity was maintained for 4 h and the leached iron reached low levels. Based on the catalyst characterizations, product analysis and literatures, the removal mechanism was speculated preliminarily, during which, OH and SO₄^- played key roles for oxidizing NO and Hg° into NO₃^- and Hg²⁺.

Simultaneous removal of NO and SO2 from flue gas by combined heat and Fe2+ activated aqueous persulfate solutions

The use of advanced oxidation processes (AOPs) to integrate flue gas treatments for SO₂, NO_x and Hg⁰ into a single process unit is rapidly gaining research attention. AOPs are processes that rely on the generation of mainly the hydroxyl radical. This work evaluates the effectiveness of the simultaneous removal of NO and SO₂ from flue gas utilizing AOP induced by the combined heat and Fe²⁺ activation of aqueous persulfate, and elucidates the reaction pathways. The results indicated that both SO₂ in the flue gas and Fe²⁺ in solution improved NO removal, while the SO₂ is almost completely removed. Increased temperature led to increase in NO removal in the absence and presence of both Fe²⁺ and SO₂, and in the absence of either SO₂ or Fe²⁺, but the enhanced NO removal due to the presence of SO₂ alone dominated at all temperatures. The removal of NO increased from 77.5% at 30 °C to 80.5% and 82.3% at 50 °C and 70 °C in the presence of SO₂ alone, and from 35.3% to 62.7% and 81.2%, respectively, in the presence of Fe²⁺ alone. However, in the presence of both SO₂ and Fe²⁺, NO conversion is 46.2% at 30 °C, increased only slightly to 48.2% at 50 °C; but sharply increased to 78.7% at 70 °C compared to 63.9% for persulfate-only activation. Results suggest NO removal in the presence of SO₂ is equally effective by heat-only or heat-Fe²⁺ activation as the temperature increases. The results should be useful for future developments of advanced oxidation processes for flue gas treatments.

An investigation of mass transfer-reaction kinetics of NO absorption by wet scrubbing using an electrolyzed seawater solution

The mass transfer-reaction kinetics of NO absorption by wet scrubbing using electrolyzed seawater was studied in a bench-scale bubbling reactor.

High frequency ultrasonic-assisted CO2 absorption in a high pressure water batch system

Physical absorption process is always nullified by the presence of cavitation under low frequency ultrasonic irradiation. In the present study, high frequency ultrasonic of 1.7MHz was used for the physical absorption of CO2 in a water batch system under elevated pressure. The parameters including ultrasonic power and initial feed pressure for the system have been varied from 0 to 18W and 6 to 41bar, respectively. The mass transfer coefficient has been determined via the dynamic pressure-step method. Besides, the actual ultrasonic power that transmitted to the liquid was measured based on calorimetric method prior to the absorption study. Subsequently, desorption study was conducted as a comparison with the absorption process. The mechanism for the ultrasonic assisted absorption has also been discussed. Based on the results, the mass transfer coefficient has increased with the increasing of ultrasonic power. It means that, the presence of streaming effect and the formation of liquid fountain is more favorable under high frequency ultrasonic irradiation for the absorption process. Therefore, high frequency ultrasonic irradiation is suggested to be one of the potential alternatives for the gas separation process with its promising absorption enhancement and compact design.