Pervaporation of organic compounds from aqueous mixtures using polydimethylsiloxane-containing block copolymer membranes

Membranes for bioethanol production by pervaporation

BACKGROUND

Bioethanol as a renewable energy resource plays an important role in alleviating energy crisis and environmental protection. Pervaporation has achieved increasing attention because of its potential to be a useful way to separate ethanol from the biomass fermentation process.

RESULTS

This overview of ethanol separation via pervaporation primarily concentrates on transport mechanisms, fabrication methods, and membrane materials. The research and development of polymeric, inorganic, and mixed matrix membranes are reviewed from the perspective of membrane materials as well as modification methods. The recovery performance of the existing pervaporation membranes for ethanol solutions is compared, and the approaches to further improve the pervaporation performance are also discussed.

CONCLUSIONS

Overall, exploring the possibility and limitation of the separation performance of PV membranes for ethanol extraction is a long-standing topic. Collectively, the quest is to break the trade-off between membrane permeability and selectivity. Based on the facilitated transport mechanism, further exploration of ethanol-selective membranes may focus on constructing a well-designed microstructure, providing active sites for facilitating the fast transport of ethanol molecules, hence achieving both high selectivity and permeability simultaneously. Finally, it is expected that more and more successful research could be realized into commercial products and this separation process will be deployed in industrial practices in the near future.

Multiblock Copolymer Grafting for Butanol Biofuel Recovery by a Sustainable Membrane Process

Biobutanol is an attractive renewable biofuel mainly obtained by the acetone-butanol-ethanol (ABE) fermentation process. Nevertheless, the alcohol concentration has to be limited to a maximum of 2 wt % in ABE fermentation broths to avoid butanol toxicity to the microorganisms. The pervaporation (PV) membrane process is a key sustainable technology for butanol recovery in these challenging conditions. In this work, the grafting of azido-polydimethylsiloxane (PDMS-N3) onto a PDMS-based multiblock copolymer containing alkyne side groups led to a series of original membrane materials with increasing PDMS contents from 50 to 71 wt %. Their membrane properties were assessed for butanol recovery by pervaporation from a model aqueous solution containing 2 wt % of n-butanol at 50 °C. The membrane flux J50μm for a reference thickness of 50 μm strongly increased from 84 to 192 g/h m(2) with increasing PDMS content for free-standing dense membranes with thicknesses in the range of 38-95 μm. At the same time, the intrinsic butanol permeability increased from 1.47 to 4.68 kg μm/h m(2) kPa and the permeate butanol content was also strongly improved from 38 to 53 wt %, corresponding to high and very high membrane separation factors of 30 and 55, respectively. Therefore, the new grafted copolymer materials strongly overcame the common permeability/selectivity trade-off for butanol recovery by a sustainable membrane process.