Generalized Gibbs free energy of confined nanoparticles

Determination of standard molar volume of 1-hexyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide on titanium dioxide surface

The fluids near the solid substrate display different properties compared to the bulk fluids owing to the asymmetric interaction between the fluid and substrate; however, to the best of our knowledge, no work has been conducted to determine the interfacial properties of fluids experimentally. In this work, we combined a pycnometer with experimental measurements and data processing to determine the standard thermodynamic properties of interfacial fluids for the first time. In the study, 1-hexyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([Hmim][NTf2]) and titanium dioxide (P25) were chosen as the probes to prove the concept. It was found that, with the combination of the Gay-Lussac pycnometer and the colligative law, together with selecting a suitable solvent, it is possible and reliable to determine the standard molar volume of the immobilized [Hmim][NTf2]. Compared to the bulk phase, the molar volumes of [Hmim][NTf2] on the P25 surface reduce by 20.8%-23.7% at temperatures from 293.15 to 323.15 K, and the reduction degrees decrease with increasing temperatures. The newly determined standard thermodynamic data was used to obtain the model parameters of hybrid electrolyte perturbed-chain statistical associating fluid theory density functional theory (ePC-SAFT-DFT), and further predictions of the density of interfacial ionic liquids with different film thicknesses were proved to be reliable in comparison with the experiment results.

Ternary Phase-Field Simulation of Poly(vinylidene fluoride) Microporous Membrane Structures Prepared by Nonsolvent-Induced Phase Separation with Different Additives and Solvent Treatments

In this study, an existing ternary membrane system based on nonsolvent-induced phase separation (NIPS) with a phase-field model was optimized. To study and analyze the effects of different additives on the formation of the skin layer and the effects of the three solvents on membrane characterization under the same conditions, two-dimensional simulations of the relevant parameters of a poly(vinylidene fluoride) (PVDF) membrane system were performed. The specific application of quaternary substances in ternary membrane systems was elaborated by determining the cohesive energy density between the additives and solvents, followed by the interaction parameters χ under the joint effect of the two. The results showed that the PVDF microporous membrane formed a dense surface layer at the mass transfer exchange interface, and with an increase in the poly(ethylene glycol) (PEG) concentration, the phase separation of the skin layer was predominantly transformed from liquid-solid partitioning to liquid-liquid partitioning; the number of membrane pores increased with increasing poly(vinylpyrrolidone) (PVP) concentration. The N,N-dimethylacetamide (DMAc) solvent system had the most stable thermodynamic properties; the dimethyl sulfoxide (DMSO) solvent system had mostly large pores running through the membrane and exhibited a porous structure. Related experiments also validated the model. Therefore, this model can be applied to other PVDF ternary membrane systems to better understand the structural development of microporous PVDF membranes under different conditions.

Integrative studies of ionic liquid interface layers: bridging experiments, theoretical models and simulations

Ionic liquids (ILs) are a class of salts existing in the liquid state below 100 °C, possessing low volatility, high thermal stability as well as many highly attractive solvent and electrochemical capabilities, etc., making them highly tunable for a great variety of applications, such as lubricants, electrolytes, and soft functional materials. In many applications, ILs are first either physi- or chemisorbed on a solid surface to successively create more functional materials. The functions of ILs at solid surfaces can differ considerably from those of bulk ILs, mainly due to distinct interfacial layers with tunable structures resulting in new ionic liquid interface layer properties and enhanced performance. Due to an almost infinite number of possible combinations among the cations and anions to form ILs, the diversity of various solid surfaces, as well as different external conditions and stimuli, a detailed molecular-level understanding of their structure-property relationship is of utmost significance for a judicious design of IL-solid interfaces with appropriate properties for task-specific applications. Many experimental techniques, such as atomic force microscopy, surface force apparatus, and so on, have been used for studying the ion structuring of the IL interface layer. Molecular Dynamics simulations have been widely used to investigate the microscopic behavior of the IL interface layer. To interpret and clarify the IL structure and dynamics as well as to predict their properties, it is always beneficial to combine both experiments and simulations as close as possible. In another theoretical model development to bridge the structure and properties of the IL interface layer with performance, thermodynamic prediction & property modeling has been demonstrated as an effective tool to add the properties and function of the studied nanomaterials. Herein, we present recent findings from applying the multiscale triangle "experiment-simulation-thermodynamic modeling" in the studies of ion structuring of ILs in the vicinity of solid surfaces, as well as how it qualitatively and quantitatively correlates to the overall ILs properties, performance, and function. We introduce the most common techniques behind "experiment-simulation-thermodynamic modeling" and how they are applied for studying the IL interface layer structuring, and we highlight the possibilities of the IL interface layer structuring in applications such as lubrication and energy storage.

Towards understanding the lower CH4 selectivity of HCP-Co than FCC-Co in Fischer-Tropsch synthesis

In Fischer-Tropsch synthesis (FTS), the cobalt catalyst has higher C5+ and lower CH4 selectivity in the hcp phase than in the fcc phase. However, a detailed explanation of the intrinsic mechanism is still missing. The underlying reason was explored combining density functional theory, Wulff construction, and a particle-level descriptor based on the slab model of surfaces that are prevalent in the Wulff shape to provide single-particle level understanding. Using a particle-level indicator of the reaction rates, we have shown that it is more difficult to form CH4 on hcp-Co than on fcc-Co, due to the larger effective barrier difference of CH4 formation and C-C coupling on hcp-Co particles, which leads to the lower CH4 selectivity of hcp-Co in FTS. Among the exposed facets of fcc-Co, the (311) surface plays a pivotal role in promoting CH4 formation. The reduction of CH4 selectivity in cobalt-based FTS is achievable through phase engineering of Co from fcc to hcp or by tuning the temperature and size of the particles.

Multifarious colloidal structures: new insight into ternary and quadripartite ordered assemblies

DNA-mediated assembly of colloidal particles can be utilized to produce a variety of structures which may have desirable phononic, photonic, or electronic transport properties. Recent developments in linker-mediated assembly processes allow for interactions to be coordinated between many different types of colloidal particles more easily and with fewer unique sequences than direct hybridization. However, the dynamics of colloidal self-assembly becomes increasingly more complex when coordinating interactions between three or more distinct interacting elements. In such cases particle pairs with similar binding energies are allowed to interact unpredictably, and enthalpically degenerate binding sites will be noticeably more present while numerous secondary phases may also result from the self-assembly process. Therefore, it is necessary to develop procedures for predicting feasible superstructure geometries for these systems before they can be implemented in material design. Here we investigate the formation of multifarious ordered structures through self-assembly of multiple types of spherically symmetrical colloidal particles with a variety of interaction matrices. We utilize Molecular Dynamics (MD) simulations to study the growth behavior of systems with different types of interacting elements and different particle sizes, and also predict the formation and stability of the target structures. We also study the phononic spectra of various ternary structures in order to identify the influence of key structural parameters on phonon bandgap frequencies and ranges. Our results provide direct guidelines for designing ternary and quadripartite multifarious colloidal structures, and motivate new directions for future experimental work to target formation of multi-component colloidal superstructures beyond the well-established binary symmetries studied in the past.

Nanoconfinement-Mediated Water Treatment: From Fundamental to Application

Safe and clean water is of pivotal importance to all living species and the ecosystem on earth. However, the accelerating economy and industrialization of mankind generate water pollutants with much larger quantity and higher complexity than ever before, challenging the efficacy of traditional water treatment technologies. The flourishing researches on nanomaterials and nanotechnologies in the past decade have generated new understandings on many fundamental processes and brought revolutionary upgrades to various traditional technologies in almost all areas, including water treatment. An indispensable step toward the real application of nanomaterials in water treatment is to confine them in large processable substrate to address various inherent issues, such as spontaneous aggregation, difficult operation and potential environmental risks. Strikingly, when the size of the spatial restriction provided by the substrate is on the order of only one or several nanometers, referred to as nanoconfinement, the phase behavior of matter and the energy diagram of a chemical reaction could be utterly changed. Nevertheless, the relationship between such changes under nanoconfinement and their implications for water treatment is rarely elucidated systematically. In this Critical Review, we will briefly summarize the current state-of-the-art of the nanomaterials, as well as the nanoconfined analogues (i.e., nanocomposites) developed for water treatment. Afterward, we will put emphasis on the effects of nanoconfinement from three aspects, that is, on the structure and behavior of water molecules, on the formation (e.g., crystallization) of confined nanomaterials, and on the nanoenabled chemical reactions. For each aspect, we will build the correlation between the nanoconfinement effects and the current studies for water treatment. More importantly, we will make proposals for future studies based on the missing links between some of the nanoconfinement effects and the water treatment technologies. Through this Critical Review, we aim to raise the research attention on using nanoconfinement as a fundamental guide or even tool to advance water treatment technologies.

On the ionic liquid films 'pinned' by core-shell structured Fe3O4@carbon nanoparticles and their tribological properties

A strongly 'pinned' ionic liquid (IL, [BMIM][PF6]) film on a silicon (Si) surface via carbon capsuled Fe3O4 core-shell (Fe3O4@C) nanoparticles is achieved, revealing excellent friction-reducing ability at a high load. The adhesion force is measured to be ∼198 nN at the Fe3O4@C-Si interface by the Fe3O4@C colloidal AFM tip, which is stronger than that at both Fe3O4@C-Fe3O4@C (∼60 nN) and IL-Si (∼10 nN) interfaces, indicating a strong 'normal pin-force' towards the Si substrate. The resulting strengthened force enables the formation of lateral IL networks via the dipole-dipole attractions among Fe3O4 cores. The observed blue shift of the characteristic band related to the IL anion in the ATR-FTIR spectra confirmed the enhanced interaction. The N-Si, P-O chemical bonds formed as a result of the IL interactions with the Si substrate confirmed by XPS spectroscopy suggested that the IL lay on the Si plane. This orientation is favorable for Fe3O4@C nanoparticles to exert 'normal pin-force' and press the IL film strongly onto surfaces. The IL ions/clusters are thus anchored by these Fe3O4@C 'pins' onto the substrate to form a dense film, resulting in a smaller interaction size parameter, which is responsible for the reduced friction coefficient μ.

Multiscale Simulation of Morphology Evolution of Supported Pt Nanoparticles via Interfacial Control

The structural and electronic properties of the interface are critical for the morphology of supported metal nanoparticles and thus the performance in catalysis, photonics, biomedical research, and other areas. To reveal the intrinsic mechanism of the formation of various morphologies, a multiscale simulation strategy is adopted to bridge the macroscopic structures by experimental observations and microscopic properties by theoretical calculations. This strategy incorporates the density functional theory (DFT) for the interaction energy calculation, the molecular dynamics (MD) simulation for the structure evolution, and theoretical model for the correlation with contact angles. The interaction energies between Pt atoms (four-atom clusters) and substrates are applied for the force field parametrization in the following MD simulation. Simulation results show the binding energies and structural properties such as radial distribution function and coordination number for supported metal nanoparticles with various sizes in detail. Notably, the contact angles of supported nanoparticles are well correlated by the strength of metal-support interactions. This work yields guidelines on the structure modulation of supported metal nanoparticles via interfacial control.

The chemical (not mechanical) paradigm of thermodynamics of colloid and interface science

In the most influential monograph on colloid and interfacial science by Adamson three fundamental equations of "physical chemistry of surfaces" are identified: the Laplace equation, the Kelvin equation and the Gibbs adsorption equation, with a mechanical definition of surface tension by Young as a starting point. Three of them (Young, Laplace and Kelvin) are called here the "mechanical paradigm". In contrary it is shown here that there is only one fundamental equation of the thermodynamics of colloid and interface science and all the above (and other) equations of this field follow as its derivatives. This equation is due to chemical thermodynamics of Gibbs, called here the "chemical paradigm", leading to the definition of surface tension and to 5 rows of equations (see Graphical abstract). The first row is the general equation for interfacial forces, leading to the Young equation, to the Bakker equation and to the Laplace equation, etc. Although the principally wrong extension of the Laplace equation formally leads to the Kelvin equation, using the chemical paradigm it becomes clear that the Kelvin equation is generally incorrect, although it provides right results in special cases. The second row of equations provides equilibrium shapes and positions of phases, including sessile drops of Young, crystals of Wulff, liquids in capillaries, etc. The third row of equations leads to the size-dependent equations of molar Gibbs energies of nano-phases and chemical potentials of their components; from here the corrected versions of the Kelvin equation and its derivatives (the Gibbs-Thomson equation and the Freundlich-Ostwald equation) are derived, including equations for more complex problems. The fourth row of equations is the nucleation theory of Gibbs, also contradicting the Kelvin equation. The fifth row of equations is the adsorption equation of Gibbs, and also the definition of the partial surface tension, leading to the Butler equation and to its derivatives, including the Langmuir equation and the Szyszkowski equation. Positioning the single fundamental equation of Gibbs into the thermodynamic origin of colloid and interface science leads to a coherent set of correct equations of this field. The same provides the chemical (not mechanical) foundation of the chemical (not mechanical) discipline of colloid and interface science.

Confinement Phenomenon Effect on the CO2 Absorption Working Capacity in Ionic Liquids Immobilized into Porous Solid Supports

In this work, the CO₂ absorption working capacity and solubility in ionic liquids immobilized into porous solid materials (substrates) were studied both experimentally and theoretically. The CO₂ absorption working capacity in the immobilized ionic liquids was measured experimentally. It was found that the CO₂ absorption working capacity and solubility increased up to 10-fold compared to that in the bulk ionic liquids when the film thickness was nearly 2.5 nm in the [HMIm][NTf₂] immobilized in the P25. Meanwhile, a new model was proposed to describe the Gibbs free energy of CO₂ in the immobilized ionic liquids, and both macro- and microanalyses of the CO₂ solubility in the confined ionic liquids were conducted. The theoretical investigations reveal that the substrate has a crucial effect on the gas solubility in the ionic liquid immobilized into the substrates, and the model performance was approved with a consideration of the substrate effect.