Co-doped ZnO thin films grown by pulsed electron beam ablation as model nano-catalysts in fischer-tropsch synthesis

Active Sites in Heterogeneous Catalytic Reaction on Metal and Metal Oxide: Theory and Practice

Active sites play an essential role in heterogeneous catalysis and largely determine the reaction properties. Yet identification and study of the active sites remain challenging owing to their dynamic behaviors during catalysis process and issues with current characterization techniques. This article provides a short review of research progresses in active sites of metal and metal oxide catalysts, which covers the past achievements, current research status, and perspectives in this research field. In particular, the concepts and theories of active sites are introduced. Major experimental and computational approaches that are used in active site study are summarized, with their applications and limitations being discussed. An outlook of future research direction in both experimental and computational catalysis research is provided.

Use of Plasma-Synthesized Nano-Catalysts for CO Hydrogenation in Low-Temperature Fischer⁻Tropsch Synthesis: Effect of Catalyst Pre-Treatment

A study was done on the effect of temperature and catalyst pre-treatment on CO hydrogenation over plasma-synthesized catalysts during the Fischer–Tropsch synthesis (FTS). Nanometric Co/C, Fe/C, and 50%Co-50%Fe/C catalysts with BET specific surface area of ~80 m² g^–1 were tested at a 2 MPa pressure and a gas hourly space velocity (GHSV) of 2000 cm³ h⁻¹ g⁻¹ of a catalyst (at STP) in hydrogen-rich FTS feed gas (H₂:CO = 2.2). After pre-treatment in both H₂ and CO, transmission electron microscopy (TEM) showed that the used catalysts shifted from a mono-modal particle-size distribution (mean ~11 nm) to a multi-modal distribution with a substantial increase in the smaller nanoparticles (~5 nm), which was statistically significant. Further characterization was conducted by scanning electron microscopy (SEM with EDX elemental mapping), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). The average CO conversion at 500 K was 18% (Co/C), 17% (Fe/C), and 16% (Co-Fe/C); 46%, 37%, and 57% at 520 K; and 85%, 86% and 71% at 540 K respectively. The selectivity of Co/C for C₅₊ was ~98% with 8% gasoline, 61%, diesel and 28% wax (fractions) at 500 K; 22% gasoline, 50% diesel, and 19% wax at 520 K; and 24% gasoline, 34% diesel, and 11% wax at 540 K, besides CO₂ and CH₄ as by-products. Fe-containing catalysts manifested similar trends, with a poor conformity to the Anderson–Schulz–Flory (ASF) product distribution.