Fabrication of mixed-matrix membranes with MOF-derived porous carbon for CO2 separation

CO2 gas separation using mixed matrix membranes based on polyethersulfone/MIL-100(Al)

The excessive use of natural gas and other fossil fuels by the industrial sector leads to the production of great quantities of gas pollutants, including CO2, SO2, and NO x . Consequently, these gases increase the temperature of the earth, producing global warming. Different strategies have been developed to help overcome this problem, including the utilization of separation membrane technology. Mixed matrix membranes (MMMs) are hybrid membranes that combine an organic polymer as a matrix and an inorganic compound as a filler. In this study, MMMs were prepared based on polyethersulfone (PES) and a type of metal–organic framework (MOF), Materials of Institute Lavoisier (MIL)-100(Al) [Al3O(H2O)2(OH)(BTC)2] (BTC: benzene 1,3,5-tricarboxylate) using a phase inversion method. The influence on the properties of the produced membranes by addition of 5, 10, 20, and 30% MIL-100(Al) (w/w) to the PES was also investigated. Fourier-transform infrared spectroscopy (FTIR) analysis indicated that no chemical interactions occurred between PES and MIL-100(Al). Scanning electron microscope (SEM) images showed agglomeration at PES/MIL-100(Al) 30% (w/w) and that the thickness of the dense layer increased up to 3.70 µm. After the addition of MIL-100(Al) of 30% (w/w), the permeability of the MMMs for CO2, O2, and N2 gases was enhanced by approximately 16, 26, and 14 times, respectively, as compared with a neat PES membrane. The addition of MIL-100(Al) to PES increased the thermal stability of the membranes, reaching 40°C as indicated by thermogravimetry analysis (TGA). An addition of 20% MIL-100(Al) (w/w) increased membrane selectivity for CO2/O2 from 2.67 to 4.49 (approximately 68.5%), and the addition of 10% MIL-100(Al) increased membrane selectivity for CO2/N2 from 1.01 to 2.12 (approximately 110.1%).

Multifunctional fluorocarbon photobioreactor system: a novel integrated device for CO2 segregation, O2 collection, and enhancement of microalgae growth and bioproductions

An enhanced greenhouse effect due to high CO₂ emissions has become one of the most concerning issues worldwide. Although plant/algae-mediated approaches have been extensively used for CO₂ segregation in the last decades, these methods are generally aimed at environment protection. In contrast, less attention has been given to CO₂ manipulation that has regrettably caused a decrease in the commercial availability of the associated technologies. To generate a system for practical use, a synthetic fluorocarbon photobioreactor system (FCPBRS) consisting of a CO₂ isolation unit, a gas modulation unit, an O₂ collection unit, and a microalgal culture chamber was developed in this study. After injecting a 60%-N₂/40%-CO₂ gas mixture into the CO₂ isolation unit for 10 days, the results showed that the FCPBRS enabled a > 93% CO₂ separation efficiency using a fluorocarbon liquid FC-40 as the CO₂ adsorbent. In addition, the growth rate of Nannochloropsis oculata was significantly enhanced when cultured with 20 mL min^-1 of the FC-40 flow containing 2% CO₂ throughout the time course, resulting in 4.7-, 4.6-, and 4.5-fold (P < 0.05 for each) increases in biomass, total lipid, and eicosapentaenoic acid yields, respectively, compared to the aerated group without FC-40. Moreover, approximately 1600 mL of photosynthetic O₂ with a ~ 80% collection efficiency was obtained in the O₂ collection unit within 10 days of FCPBRS operation. These outcomes indicate that the FCPBRS may provide a feasible means to simultaneously achieve CO₂ isolation, O₂ collection, and enhanced microalgae bioproductions.

Penetrated COF Channels: Amino Environment and Suitable Size for CO2 Preferential Adsorption and Transport in Mixed Matrix Membranes

Developing mixed matrix membranes (MMMs) is challenging because the interface between different matrices often forms undesirable structures. Herein, we demonstrate a method of creating suitable CO₂-selective channels based on interface regulation that greatly enhances membrane separation performance. The poly(vinylamine), which also acts as a polymer matrix, was immobilized onto covalent organic frameworks (COFs) to obtain polymer-COF hybrid materials (COF_p). The COF_p and polymer matrix are highly compatible because they have the same segment. The polymer matrix was induced to penetrate the oversized COF_p, resulting in an amino-environmental pore wall and appropriately sized CO₂-selective channels dispersed in MMMs. The MMMs exhibited satisfactory membrane performance for CO₂/N₂, CO₂/CH₄, and CO₂/H₂ separation. A CO₂ transport model for preferential adsorption and transport is clearly presented for the first time. The membrane separation mechanism is also discussed. This work demonstrates potential applications for material, interface, and membrane investigations.

Performance of Mixed Matrix Membranes Containing Porous Two-Dimensional (2D) and Three-Dimensional (3D) Fillers for CO₂ Separation: A Review

Application of conventional polymeric membranes in CO₂ separation processes are limited by the existing trade-off between permeability and selectivity represented by the renowned upper bound. Addition of porous nanofillers in polymeric membranes is a promising approach to transcend the upper bound, owing to their superior separation capabilities. Porous nanofillers entice increased attention over nonporous counterparts due to their inherent CO₂ uptake capacities and secondary transport pathways when added to polymer matrices. Infinite possibilities of tuning the porous architecture of these nanofillers also facilitate simultaneous enhancement of permeability, selectivity and stability features of the membrane conveniently heading in the direction towards industrial realization. This review focuses on presenting a complete synopsis of inherent capacities of several porous nanofillers, like metal organic frameworks (MOFs), Zeolites, and porous organic frameworks (POFs) and the effects on their addition to polymeric membranes. Gas permeation performances of select hybrids with these three-dimensional (3D) fillers and porous nanosheets have been summarized and discussed with respect to each type. Consequently, the benefits and shortcomings of each class of materials have been outlined and future research directions concerning the hybrids with 3D fillers have been suggested.