One Scalable and Stable Metal-Organic Framework for Efficient Separation of CH4/N2 Mixture

Separating CH4 from coal bed methane is of great importance but challenging. Adsorption-based separation often suffers from low selectivity, poor stability, and difficulty to scale up. Herein, a stable and scalable metal-organic framework [MOF, CoNi(pyz-NH2)] with multiple CH4 binding sites was reported to efficiently separate the CH4/N2 mixture. Due to its suitable pore size and multiple CH4 binding sites, it exhibits excellent CH4/N2 selectivity (16.5) and CH4 uptake (35.9 cm3/g) at 273 K and 1 bar, which is comparable to that of the state-of-the-art MOFs. Theoretical calculations reveal that the high density of open metal sites and polar functional groups in the pores provide strong affinity to CH4 than to N2. Moreover, CoNi(pyz-NH2) displays excellent structural stability and can be scale-up synthesized (22.7 g). This work not only provides an excellent adsorbent but also provides important inspiration for the future design and preparation of porous adsorbents for separations.

The ultramicropore biochar derived from waste distiller's grains for wet-process phosphoric acid purification: Removal performance and mechanisms of Cr(VI)

Solid waste and heavy metal pollution are long-term and challenging subjects in the field of environmental engineering. In this study, we propose a sustainable approach to "treating waste with waste" by utilizing the ultramicropore biochar derived from solid waste distiller's grains as a means to remove Cr(VI) from simulated wastewater and wet phosphoric acid. The biochar prepared in this research exhibit extremely high specific surface areas (up to 2973 m2/g) and a well-developed pore structure, resulting in a maximum Cr(VI) adsorption capacity of 426.0 mg/g and over 99% removal efficiency of Cr(VI). Furthermore, the adsorbent can be reused for up to eight cycles without significant reduction in its Cr(VI) adsorption performance. Mechanistic investigations suggest that the exceptional Cr(VI) adsorption capacity can be attributed to the synergistic effect of electrostatic interaction and reduction adsorption. This study offers an alternative approach for the resource utilization of solid waste distiller's grains, and the prepared biochar holds promise for the removal of Cr(VI) from wastewater and wet-process phosphoric acid.

Influence of ligands within Al-based metal-organic frameworks for selective separation of methane from unconventional natural gas

Efficient CH₄/N₂ separation from unconventional natural gas is vital for both energy recycling and climate change control. Figuring out the reason for the disparity between ligands in the framework and CH₄ is the crucial problem for developing adsorbents in PSA progress. In this study, a series of eco-friendly Al-based MOFs, including Al-CDC, Al-BDC, CAU-10, and MIL-160, were synthesized to investigate the influence of ligands on CH₄ separation through experimental and theoretical analyses. The hydrothermal stability and water affinity of synthetic MOFs were explored through experimental characterization. The active adsorption sites and adsorption mechanisms were investigated via quantum calculation. The results manifested that the interactions between CH₄ and MOFs materials were affected by the synergetic effects of pore structure and ligand polarities, and the disparities of ligands within MOFs determined the separation efficiency of CH₄. Especially, the CH₄ separation performance of Al-CDC with high sorbent selection (68.56), moderate isosteric adsorption heat for CH₄ (26.3 kJ/mol), and low water affinity (0.1 g/g at 40% RH) was superior to most porous adsorbents, which was attributed to its nanosheet structure, proper polarity, reduced local steric hindrance, and extra functional groups. The analysis of active adsorption sites indicated that hydrophilic carboxyl groups and hydrophobic aromatic ring were the dominant CH₄ adsorption sites for liner ligands and bent ligands, respectively. The methylene groups with saturated C-H bonds enhanced the wdV interaction between ligands and CH₄, resulting in the highest binding energy of CH₄ for Al-CDC. The results provided valuable guidance for the design and optimization of high-performance adsorbents for CH₄ separation from unconventional natural gas.

Recent Advances in Carbon-Based Adsorbents for Adsorptive Separation of Light Hydrocarbons

Light hydrocarbons (LHs) separation is an important process in petrochemical industry. The current separation technology predominantly relies on cryogenic distillation, which results in considerable energy consumption. Adsorptive separation using porous solids has received widespread attention due to its lower energy footprint and higher efficiency. Thus, tremendous efforts have been devoted to the design and synthesis of high-performance porous solids. Among them, porous carbons display exceptional stability, tunable pore structure, and surface chemistry and thus represent a class of novel adsorbents upon achieving the matched pore structures for LHs separations. In this review, the modulation strategies toward advanced carbon-based adsorbents for LHs separation are firstly reviewed. Then, the relationships between separation performances and key structural parameters of carbon adsorbents are discussed by exemplifying specific separation cases. The research findings on the control of the pore structures as well as the quantification of the adsorption sites are highlighted. Finally, the challenges of carbonaceous adsorbents facing for LHs separation are given, which would motivate us to rationally design more efficient absorbents and separation processes in future.

Influence of ultra-micropore volume of activated carbons prepared from noble mung bean on the adsorption properties of CO2, CH4, and N2

In this study, mung bean-based nanoporous activated carbons with different pore properties were prepared by varying the mass ratio of activating agent (KOH) and activation temperature.