State of the art of ionic liquid‐modified adsorbents for CO 2 capture and separation

Advanced Materials for NH3 Capture: Interaction Sites and Transport Pathways

Ammonia (NH3) is a carbon-free, hydrogen-rich chemical related to global food safety, clean energy, and environmental protection. As an essential technology for meeting the requirements raised by such issues, NH3 capture has been intensively explored by researchers in both fundamental and applied fields. The four typical methods used are (1) solvent absorption by ionic liquids and their derivatives, (2) adsorption by porous solids, (3) ab-adsorption by porous liquids, and (4) membrane separation. Rooted in the development of advanced materials for NH3 capture, we conducted a coherent review of the design of different materials, mainly in the past 5 years, their interactions with NH3 molecules and construction of transport pathways, as well as the structure-property relationship, with specific examples discussed. Finally, the challenges in current research and future worthwhile directions for NH3 capture materials are proposed.

Prediction of CO2 solubility in Ionic liquids for CO2 capture using deep learning models

Ionic liquids (ILs) are highly effective for capturing carbon dioxide (CO2). The prediction of CO2 solubility in ILs is crucial for optimizing CO2 capture processes. This study investigates the use of deep learning models for CO2 solubility prediction in ILs with a comprehensive dataset of 10,116 CO2 solubility data in 164 kinds of ILs under different temperature and pressure conditions. Deep neural network models, including Artificial Neural Network (ANN) and Long Short-Term Memory (LSTM), were developed to predict CO2 solubility in ILs. The ANN and LSTM models demonstrated robust test accuracy in predicting CO2 solubility, with coefficient of determination (R2) values of 0.986 and 0.985, respectively. Both model's computational efficiency and cost were investigated, and the ANN model achieved reliable accuracy with a significantly lower computational time (approximately 30 times faster) than the LSTM model. A global sensitivity analysis (GSA) was performed to assess the influence of process parameters and associated functional groups on CO2 solubility. The sensitivity analysis results provided insights into the relative importance of input attributes on output variables (CO2 solubility) in ILs. The findings highlight the significant potential of deep learning models for streamlining the screening process of ILs for CO2 capture applications.

Reactive capture and electrochemical conversion of CO2 with ionic liquids and deep eutectic solvents

Ionic liquids (ILs) and deep eutectic solvents (DESs) have tremendous potential for reactive capture and conversion (RCC) of CO2 due to their wide electrochemical stability window, low volatility, and high CO2 solubility. There is environmental and economic interest in the direct utilization of the captured CO2 using electrified and modular processes that forgo the thermal- or pressure-swing regeneration steps to concentrate CO2, eliminating the need to compress, transport, or store the gas. The conventional electrochemical conversion of CO2 with aqueous electrolytes presents limited CO2 solubility and high energy requirement to achieve industrially relevant products. Additionally, aqueous systems have competitive hydrogen evolution. In the past decade, there has been significant progress toward the design of ILs and DESs, and their composites to separate CO2 from dilute streams. In parallel, but not necessarily in synergy, there have been studies focused on a few select ILs and DESs for electrochemical reduction of CO2, often diluting them with aqueous or non-aqueous solvents. The resulting electrode-electrolyte interfaces present a complex speciation for RCC. In this review, we describe how the ILs and DESs are tuned for RCC and specifically address the CO2 chemisorption and electroreduction mechanisms. Critical bulk and interfacial properties of ILs and DESs are discussed in the context of RCC, and the potential of these electrolytes are presented through a techno-economic evaluation.

Carbon Dioxide Capture by Emerging Innovative Polymers: Status and Perspectives

A significant amount of research has been conducted in carbon dioxide (CO2) capture, particularly over the past decade, and continues to evolve. This review presents the most recent advancements in synthetic methodologies and CO2 capture capabilities of diverse polymer-based substances, which includes the amine-based polymers, porous organic polymers, and polymeric membranes, covering publications in the last 5 years (2019-2024). It aims to assist researchers with new insights and approaches to develop innovative polymer-based materials with improved capturing CO2 capacity, efficiency, sustainability, and cost-effective, thereby addressing the current obstacles in carbon capture and storage to sooner meeting the net-zero CO2 emission target.

Energy Applications of Ionic Liquids: Recent Developments and Future Prospects

Ionic liquids (ILs) consisting entirely of ions exhibit many fascinating and tunable properties, making them promising functional materials for a large number of energy-related applications. For example, ILs have been employed as electrolytes for electrochemical energy storage and conversion, as heat transfer fluids and phase-change materials for thermal energy transfer and storage, as solvents and/or catalysts for CO2 capture, CO2 conversion, biomass treatment and biofuel extraction, and as high-energy propellants for aerospace applications. This paper provides an extensive overview on the various energy applications of ILs and offers some thinking and viewpoints on the current challenges and emerging opportunities in each area. The basic fundamentals (structures and properties) of ILs are first introduced. Then, motivations and successful applications of ILs in the energy field are concisely outlined. Later, a detailed review of recent representative works in each area is provided. For each application, the role of ILs and their associated benefits are elaborated. Research trends and insights into the selection of ILs to achieve improved performance are analyzed as well. Challenges and future opportunities are pointed out before the paper is concluded.

High-Performance CO2 Capture from Air by Harnessing the Power of CaO- and Superbase-Ionic-Liquid-Engineered Sorbents

Direct air capture (DAC) of CO2 by solid porous materials represents an attractive "negative emission" technology. However, state-of-the-art sorbents based on supported amines still suffer from unsolved high energy consumption and stability issues. Herein, taking clues from the CO2 interaction with superbase-derived ionic liquids (SILs), high-performance and tunable sorbents in DAC of CO2 was developed by harnessing the power of CaO- and SIL-engineered sorbents. Deploying mesoporous silica as the substrate, a thin CaO layer was first introduced to consume the surface-OH groups, and then active sites with different basicities (e. g., triazolate and imidazolate) were introduced as a uniformly distributed thin layer. The as-obtained sorbents displayed high CO2 uptake capacity via volumetric (at 0.4 mbar) and breakthrough test (400 ppm CO2 source), rapid interaction kinetics, facile CO2 releasing, and stable sorption/desorption cycles. Operando diffuse reflectance infrared Fourier transformation spectroscopy (DRIFTS) analysis under simulated air atmosphere and solid-state NMR under 13 CO2 atmosphere demonstrated the critical roles of the SIL species in low-concentration CO2 capture. The fundamental insights obtained in this work provide guidance on the development of high-performance sorbents in DAC of CO2 by leveraging the combined advantages of porous solid scaffolds and the unique features of CO2 -philic ionic liquids.

Porous Polymer Supported Amino Functionalized Ionic Liquid for Effective CO2 Capture

A decrease in CO₂ emissions is urgently required in the present situation due to the fast growth of carbon dioxide (CO₂) in the atmosphere, which has caused a series of global climate issues. This study used an impregnation-evaporation method to immobilize an amino functionalized ionic liquid [C₂OHmim][Lys] on a chromatographic column filler GDX-103 and create a novel supported ionic liquid. The results showed that the supported ionic liquid with 60 wt % ionic liquid content had the best adsorption performance at 40 °C, and the CO₂ adsorption isotherm showed that the adsorption capacity at 0.1 MPa was 1.29 mmol CO₂/g sorbent, which was 6 times greater than the adsorption capacity of the pure carrier. The sample with 60% ionic liquid content has an adsorption capacity of 1.02 mmol CO₂/g sorbent under the condition of CO₂/N₂ mixed gas with 10% CO₂ content. This is 43 times greater than the adsorption capacity of the pure carrier, and its adsorption performance is stable after three adsorption and desorption cycles. Through the rich porous structure of GDX-103, the ionic liquid is effectively supported and dispersed, which expands the contact area between CO₂ and ionic liquid and enhances the mass transfer of CO₂. At the same time, CO₂ can be chemically bound to the groups on the anion of ionic liquid and be immobilized, so it has a high selective adsorption capacity of CO₂, which makes it a great alternative to traditional CO₂ adsorbents.

Tuning Functionalized Ionic Liquids for CO2 Capture

The increasing concentration of CO₂ in the atmosphere is related to global climate change. Carbon capture, utilization, and storage (CCUS) is an important technology to reduce CO₂ emissions and to deal with global climate change. The development of new materials and technologies for efficient CO₂ capture has received increasing attention among global researchers. Ionic liquids (ILs), especially functionalized ILs, with such unique properties as almost no vapor pressure, thermal- and chemical-stability, non-flammability, and tunable properties, have been used in CCUS with great interest. This paper focuses on the development of functionalized ILs for CO₂ capture in the past decade (2012~2022). Functionalized ILs, or task-specific ILs, are ILs with active sites on cations or/and anions. The main contents include three parts: cation-functionalized ILs, anion-functionalized ILs, and cation-anion dual-functionalized ILs for CO₂ capture. In addition, classification, structures, and synthesis of functionalized ILs are also summarized. Finally, future directions, concerns, and prospects for functionalized ILs in CCUS are discussed. This review is beneficial for researchers to obtain an overall understanding of CO₂-philic ILs. This work will open a door to develop novel IL-based solvents and materials for the capture and separation of other gases, such as SO₂, H₂S, NOx, NH₃, and so on.

Adjustable Functionalization of Hyper-Cross-Linked Polymers of Intrinsic Microporosity for Enhanced CO2 Adsorption and Selectivity over N2 and CH4

In this paper, we report the design, synthesis, and characterization of a series of hyper-cross-linked polymers of intrinsic microporosity (PIMs), with high CO₂ uptake and good CO₂/N₂ and CO₂/CH₄ selectivity, which makes them competitive for carbon capture and biogas upgrading. The starting hydrocarbon polymers' backbones were functionalized with groups such as -NO₂, -NH₂, and -HSO₃, with the aim of tuning their adsorption selectivity toward CO₂ over nitrogen and methane. This led to a significant improvement in the performance in the potential separation of these gases. All polymers were characterized via Fourier transform infrared (FTIR) spectroscopy and ¹³C solid-state NMR to confirm their molecular structures and isothermal gas adsorption to assess their porosity, pore size distribution, and selectivity. The insertion of the functional groups resulted in an overall decrease in the porosity of the starting polymers, which was compensated with an improvement in the final CO₂ uptake and selectivity over the chosen gases. The best uptakes were achieved with the sulfonated polymers, which reached up to 298 mg g^-1 (6.77 mmol g^-1), whereas the best CO₂/N₂ selectivities were recorded by the aminated polymers, which reached 26.5. Regarding CH₄, the most interesting selectivities over CO₂ were also obtained with the aminated PIMs, with values up to 8.6. The reason for the improvements was ascribed to a synergetic contribution of porosity, choice of the functional group, and optimal isosteric heat of adsorption of the materials.