Chemical processing by self-assembly

Highly adsorptive protein inorganic nanohybrid of Moringa seeds protein and rice husk nanosilica for effective adsorption of pharmaceutical contaminants

The present study aims to investigate adsorption characteristics and mechanisms of Moringa (MO) seeds protein on nanosilica rice husk and their applications in removal of pharmaceutical residues including the fluoroquinolone antibiotic levofloxacin (LFX) and the nonsteroidal anti-inflammatory drug diclofenac (DCF) in aquatic environment. Molecular weight of MO protein was determined by gel-permeation chromatography (GPC) method while its amino acids were quantified by high performance liquid chromatography (HPLC). The number-(M_n) and weight-average molecular weights (M_w) of MO protein were 1.53 × 10⁴ and 1.61 × 10⁴ g/mol, respectively. Different effective conditions on adsorption protein on nanosilica including contact time, pH, adsorbent dosage, and ionic strength were systematically optimized and found to be 180 min, 10, 10 mg/mL and 1 mM KCl, respectively. The surface charge change by zeta potential, surface modification by Fourier-transform infrared spectroscopy (FT-IR) and adsorption isotherms demonstrated that protein adsorption on nanosilica was governed by both electrostatic and non-electrostatic interactions. Application of protein functionalized nanosilica (ProFNS) in LFX and DCF removal were also thoroughly studied. The selected conditions for LFX and DCF removal using ProFNS were 1 mM KCl for both LFX and DCF; pH 8 and pH 6; contact time 90 and 120 min, and adsorption dosage 10 and 5 mg/ml for LFX and DCF, respectively. Adsorption isotherms of protein on nanosilica as well as LFX and DCF onto ProFNS at different ionic strengths were reasonably fitted by the two-step model while a pseudo-second-order model could fit adsorption kinetic well. The removal of LFX and DCF using ProFNS significantly increased from 51.51% to 87.35%, and 7.97%-50.02%, respectively. High adsorption capacities of 75.75 mg/g for LFX and 59.52 mg/g for DCF, indicate that ProFNS is a great performance for pharmaceutical residues removal in water environment.

Fabrication and application of complex microcapsules: a review

The development of new functional materials requires cutting-edge technologies for incorporating different functional materials without reducing their functionality. Microencapsulation is a method to encapsulate different functional materials at nano- and micro-scales, which can provide the necessary protection for the encapsulated materials. In this review, microencapsulation is categorized into chemical, physical, physico-chemical and microfluidic methods. The focus of this review is to describe these four categories in detail by elaborating their various microencapsulation methods and mechanisms. This review further discusses the key features and potential applications of each method. Through this review, the readers could be aware of many aspects of this field from the fabrication processes, to the main properties, and to the applications of microcapsules.

Stimuli-Responsive Nanolatexes: Porating Films

A new class of very stable and stimuli-responsive nanolatexes based on copolymers of reactive and stimuli responsive ionic liquid surfactants is synthesized by microemulsion polymerization to yield dispersions of 22-30 nm diameter particles. Aqueous coatings of these nanolatexes dry to form robust films that exhibit stimuli-responsiveness to certain ion exchangeable anions. The nature of the reactive ionic liquid surfactant monomers induces an ion exchange capacity in the resulting copolymers and films. Transparent films of such nanolatexes can be transformed into opaque and porous films and membranes as a stimulus-response to anion exchange. These nanolatexes are ionic nanogels that are insensitive to Debye-Hückel screening by an indifferent salt and exhibit very soft interparticle interactions, qualifying them as ideal candidates as waterborne dispersing aids; in addition, these nanogels appear to be experimental examples of osmotic nanospheres emanating from the theoretical development of osmotic brushes.

Tertiary structure changes in albumin upon surface adsorption observed via fourier transform infrared spectroscopy

A nondestructive Fourier transform infrared (FTIR) spectroscopy assay, amenable to exploring a wide range of proteins and polymers, is used to measure changes in the tertiary structure of bovine serum albumin (BSA) adsorbed to three surfaces: gold, polystyrene (PS), and poly(D,L-lactic acid) (PDLLA). Tertiary structural analysis is important because typical secondary structural analysis (FTIR and CD) is not always sensitive enough to distinguish between the sometimes subtle protein structural changes caused by adsorption. The polymers are spin-coated onto a gold surface, exposed to protein, and then immersed in a deuterated buffer solution to probe the protein's tertiary structure before the sample is removed from its aqueous environment. Infrared band intensities, related to the exchange of amide hydrogen for deuterium (HDX), as a function of the immersion time in deuterated buffer, are used to determine the extent of amide solvent exposure. Analysis of the results in terms of a single exponential decay shows that enough amides undergo a measurable amount of exchange in 60 min to quantify relative changes in BSA solvent exposure on different surfaces. In addition, substantial fractions undergo HDX at a rate too fast or too slow to be followed with our experimental protocol. The proportions of these quickly and slowly exchanging amide groups also provide information about relative changes in the BSA structure on different surfaces. Adsorption was found to increase the extent of HDX over that observed for BSA in solution, consistent with surface-induced unfolding and a loss of tertiary structure. Changes in HDX were found to be more sensitive to which surface was absorbing the protein than the typical FTIR secondary structural analysis obtained from fitting the amide I band. HDX was greatest for BSA adsorbed to the surface of PDLLA and least in the case of BSA adsorbed to gold, which indicates the greatest and least degree of unfolding, respectively.

A Monte Carlo simulation study of lipid bilayer formation on hydrophilic substrates from vesicle solutions

A general lattice Monte Carlo model is used for simulating the formation of supported lipid bilayers (SLBs) from vesicle solutions. The model, based on a previously published paper, consists of adsorption, decomposition, and lateral diffusion steps, and is derived from fundamental physical interactions and mass transport principles. The Monte Carlo simulation results are fit to experimental data at different vesicle bulk concentrations. A sensitivity analysis reveals that the process strongly depends on the bulk concentration C(0), adsorption rate constant K, and all vesicle radii parameters. A measure of "quality of coverage" is proposed. By this measure, the quality of the formed bilayers is found to increase with vesicle bulk concentration.

Protein-coated β-ferric hydrous oxide particles

Using microelectrophoresis and electric light scattering techniques, we investigated the adsorption characteristics, surface coverage and surface electric parameters of superstructures from two isoforms of plastocyanin, PCa and PCb, in an oxidized state adsorbed on beta-ferric hydrous oxide particles. The surface electric charge and electric dipole moments of the composite particles and the thickness of the protein adsorption layer are determined in a wide pH range, at different ionic strengths and concentration ratios of PC to beta-FeOOH. The adsorption of the two proteins was found to shift the particles' isoelectric point and to alter the total electric charge and the electric dipole moments of the oxide particles to different extent. A "reversal" in the direction of the permanent dipole moment is observed at lower pH for PCb- than for PCa-coated oxide particles. Strict correlation is found between the changes in the electrokinetic charge of the composite particles and the variation in their "permanent" dipole moments. Data suggest that the adsorption of the proteins is driven by electrostatic and/or hydrophobic interactions with the oxide surfaces dependent on pH. The adsorption behaviour is consistent with the involvement of the "eastern" and "northern" patches of the plastocyanin molecules in their adsorption on the oxide surfaces that are differently charged depending on pH.

Towards the preparative and large-scale precision manufacture of virus-like particles

Virus-like particles (VLPs) are of interest in vaccination, gene therapy and drug delivery, but their potential has yet to be fully realized. This is because existing laboratory processes, when scaled, do not easily give a compositionally and architecturally consistent product. Research suggests that new process routes might ultimately be based on chemical processing by self-assembly, involving the precision manufacture of precursor capsomeres followed by in vitro VLP self-assembly and scale-up to required levels. A synergistic interaction of biomolecular design and bioprocess engineering (i.e. biomolecular engineering) is required if these alternative process routes and, thus, the promise of new VLP products, are to be realized.

Molecular dynamics simulations of peptide-surface interactions

Proteins, which are bioactive molecules, adsorb on implants placed in the body through complex and poorly understood mechanisms and directly influence biocompatibility. Molecular dynamics modeling using empirical force fields provides one of the most direct methods of theoretically analyzing the behavior of complex molecular systems and is well-suited for the simulation of protein adsorption behavior. To accurately simulate protein adsorption behavior, a force field must correctly represent the thermodynamic driving forces that govern peptide residue-surface interactions. However, since existing force fields were developed without specific consideration of protein-surface interactions, they may not accurately represent this type of molecular behavior. To address this concern, we developed a host-guest peptide adsorption model in the form of a G(4)-X-G(4) peptide (G is glycine, X is a variable residue) to enable determination of the contributions to adsorption free energy of different X residues when adsorbed to functionalized Au-alkanethiol self-assembled monolayers (SAMs). We have previously reported experimental results using surface plasmon resonance (SPR) spectroscopy to measure the free energy of peptide adsorption for this peptide model with X = G and K (lysine) on OH and COOH functionalized SAMs. The objectives of the present research were the development and assessment of methods to calculate adsorption free energy using molecular dynamics simulations with the GROMACS force field for these same peptide adsorption systems, with an oligoethylene oxide (OEG) functionalized SAM surface also being considered. By comparing simulation results to the experimental results, the accuracy of the selected force field to represent the behavior of these molecular systems can be evaluated. From our simulations, the G(4)-G-G(4) and G(4)-K-G(4) peptides showed minimal to no adsorption to the OH SAM surfaces and the G(4)-K-G(4) showed strong adsorption to the COOH SAM surface, which is in agreement with our SPR experiments. Contrary to our experimental results, however, the simulations predicted a relatively strong adsorption of G(4)-G-G(4) peptide to the COOH SAM surface. In addition, both peptides were unexpectedly predicted to adsorb to the OEG surface. These findings demonstrate the need for GROMACS force field parameters to be rebalanced for the simulation of peptide adsorption behavior on SAM surfaces. The developed methods provide a direct means of assessing, modifying, and validating force field performance for the simulation of peptide and protein adsorption to surfaces, without which little confidence can be placed in the simulation results that are generated with these types of systems.

The interaction of proteins with solid surfaces

The interaction of proteins with solid surfaces is a fundamental phenomenon with implications for nanotechnology, biomaterials and biotechnological processes. Kinetic and thermodynamic studies have long indicated that significant conformational changes may occur as a protein encounters a surface; new techniques are measuring and modeling these changes. Combinatorial and directed evolution techniques have created new peptide sequences that bind specifically to solid surfaces, similar to the natural proteins that regulate crystal growth. Modeling efforts capture kinetics and thermodynamics on the colloidal scale, but detailed treatments of atomic structure are still in development and face the usual challenges of protein modeling. Opportunities abound for fundamental discovery, as well as breakthroughs in biomaterials, biotechnology and nanotechnology.