Synthesis Of Biologically Active Bis(Indolyl)Methane Derivatives by Bisindole Alkylation of Tetrahydroisoquinolines with Visible‐Light Induced Ring‐Opening Fragmentation

Tuning anion binding properties of Bis(indolyl)methane Receptors: Effect of substitutions on optical responses

Chromogenic probes based onoxidizedbis(indolyl)methanes have been synthesized with varying substituents (R = -Me [1], -OMe [2], -OH, [3]) on the central aryl ring. In addition to electronic influence, the involvement of substituents in ion-dipole and charge-assisted hydrogen bonding interactions significantly alters the solvatochromic response and pH-sensitive behavior. In polar aprotic solvents, like CH₃CN, a concentration-dependent stepwise color change was observed with F^- ions. In the case of2, a reversible hydrogen bonding interaction between the deprotonated probe and HF₂^- dimer might be responsible for that, while step-wise deprotonation caused by F^- ions could be the probable reason with3. Since the formation of HF₂^- is energetically unfavorable in a polar protic solvent, the response of 2 with F^- ions appears to be very different in EtOH medium. Interestingly, no such alteration in anion sensing behavior was noticed with3going from an aprotic to a protic solvent.

Controlled tuning of radiative-nonradiative transition via solvent perturbation: Franck-Condon emission vs. aggregation caused quenching

Organic molecules with tunable fluorescence quantum yield are attractive for opto-electronic applications. A fluorophore with tunable fluorescence quantum yield should be a better choice for a variety of applications that demand fluorophores with different quantum yields. Here organic emitters with a continuous bell-shaped fluorescence yield profile would be promising in view of sustainability and reusability; however, fluorophores with these properties are rarely reported. A bis-indole derivative, 3,3'-bisindolyl(phenyl)methane (BIPM), was synthesised and found to undergo a unique 'rise-and-fall' profile in fluorescence yield with a compositional change of the 1,4-dioxane (DiOx)-H₂O solvent system. A predominant interplay of two contrasting factors, (a) polarity and proticity induced emission enhancement and (b) aggregation caused fluorescence quenching, on either side of a crossover solvent composition (∼50% f_W), resulted in a continuous bell-patterned fluorescence yield profile. Interestingly, these two factors could be observed individually or simultaneously by adjusting the H₂O fraction. Detailed spectroscopic, electron microscopic and computational studies have been performed to substantiate the photophysics behind the solvent regulated modulation of fluorescence quantum yield.

A mild one-pot transformation of nitroalkanes to ketones or aldehydes via a visible-light photocatalysis-hydrolysis sequence

Using a visible-light photoredox catalysis strategy with household decorative blue LEDs and the additives Et₃N and DIPEA, as well as the subsequent hydrolysis sequence, a mild one-pot process for the direct transformation of nitroalkanes to the corresponding ketones and aldehydes, constituting a Nef-like reaction, has been developed. It is worth noting that by using an appropriate photocatalyst (e.g., [Ir(dtbbpy)(ppy)₂]PF₆) and the extra additive Et₃N with the combination of DIPEA and Mg(ClO₄)₂ in i-PrOH (instead of CH₃CN), the transformation of nitroalkanes to the corresponding oximes, rather than nitrones, can be markedly more effective. The oximes can then be hydrolyzed to ketones by reaction with CuCl₂·2H₂O in a pH 7 buffer solution. This process is appealing because of the benefits of efficient conversion, mild conditions, high yields, and general applicability to compounds with a wide range of labile functional groups.

Accessing Unsymmetrically Linked Heterocycles through Stereoselective Palladium-Catalyzed Domino Cyclization

A palladium-catalyzed strategy is presented to synthesize unsymmetrically linked heterocycles within stereoselective tetrasubstituted olefins. This reaction is proposed to occur via a vinyl-Pd^II intermediate capable of initiating the cyclization of various alkyne-tethered nucleophiles. Products are formed in up to 96 % yield and excellent stereoselectivities are obtained using low catalyst loadings. This transformation was scalable up to 1 mmol and mechanistic studies suggest a syn-carbopalladation of the carbamoyl chloride followed by Pd^II -catalyzed cyclization of alkyne-tethered nucleophiles.

Bis-indolylation of aldehydes and ketones using silica-supported FeCl3: molecular docking studies of bisindoles by targeting SARS-CoV-2 main protease binding sites

We report herein an operationally simple, efficient and versatile procedure for the synthesis of bis-indolylmethanes via the reaction of indoles with aldehydes or ketones in the presence of silica-supported ferric chloride under grindstone conditions. The prepared supported catalyst was characterized by SEM and EDX spectroscopy. The present protocol has several advantages such as shorter reaction time, high yield, avoidance of using harmful organic solvents during the reaction and tolerance of a wide range of functional groups. Molecular docking studies targeted toward the binding site of SARS-CoV-2 main protease (3CLpro or Mpro) enzymes were investigated with the synthesized bis-indoles. Our study revealed that some of the synthesized compounds have potentiality to inhibit the SARS-CoV-2 Mpro enzyme by interacting with key amino acid residues of the active sites via hydrophobic as well as hydrogen bonding interactions.

Bismuth(iii)-catalyzed regioselective alkylation of tetrahydroquinolines and indolines towards the synthesis of bioactive core-biaryl oxindoles and CYP19 inhibitors

Bismuth(iii)-catalyzed regioselective functionalization at the C-6 position of tetrahydroquinolines and the C-5 position of indolines has been demonstrated. For the first time, one pot symmetrical and unsymmetrical arylation of isatins with tetrahydroquinolines was accomplished giving a completely new product skeleton in good to excellent yields. Most importantly, this protocol leads to the formation of a highly strained quaternary carbon stereogenic center, which is a challenging task. Benzhydryl and 1-phenylethyl trichloroacetimidates have been used as the alkylating partners to functionalize the C-6 and C-5 positions of tetrahydroquinolines and indolines, respectively. The scope of the developed methodology has been extended for the synthesis of the bioactive CYP19-inhibitor and its analogue.

Chickpea leaf exudates: a green Brønsted acid type biosurfactant for bis(indole)methane and bis(pyrazolyl)methane synthesis

A clean and highly efficient protocol for green synthesis of bis(indole)methanes and bis(pyrazolyl)methanes has been successfully achieved by using a naturally sourced bio-surfactant, chickpea leaf exudates (CLE), as a Brønsted acid-type catalyst.

Bisindolization Reaction Employing Phthalimide-N-sulfonic Acid as an Efficient Catalyst

Background:

Bis(indolyl) methanes (BIMs) have a wide spectrum of applications in biomedicine and agriculture as well as are present in natural products. These bisheterocyclic compounds possess vast pharmacological, including antifungal, antitubercular, anti-inflammatory, antibacterial, anticancer, anticonvulsant, antibiotic, antiviral, antimalarial, analgesic, and antidiabetic properties. BIMs scaffolds have also been employed as selective optical chemosensors for detection of some anions and cations with the naked eye. Because of the importance of these bisheterocycles, various methods have been reported for their synthesis through reaction of indole derivatives and aldehydes or ketones. Therefore, the synthesis of BIMs through different methodologies has received widespread attention in the field of organic synthesis and medicinal chemistry.

Objective:

In this study, the catalytic activity of phthalimide-N-sulfonic acid (PISA) as an efficient and safe solid acidic organocatalyst toward the synthesis of BIMs derivatives in ethanol is described.

Methods:

Indole derivatives (2 mmol), aryl/heteroaryl aldehydes (1 mmol), and PISA (10 mol%) were mixture in ethanol. The reaction mixture was stirred at room temperature for the appropriate times. After workup and separation of catalyst, the corresponding heterocyclic products were obtained through recrystallization from hot ethanol.

Results:

The BIMs derivatives were easily obtained via Bisindolization Reaction (BIR) of two indoles (2-methylindole and indole) with a series of aryl and heteroaryl aldehydes. The BIR was efficiently catalyzed at room temperature using PISA as an excellent organocatalyst under optimized reaction conditions.

Conclusion:

The reactions were implemented in simple manner and were completed within acceptable reaction times. The expected BIM products were obtained in satisfactory yields. The catalyst can be recovered and reused several times in the template reaction. This approach provides the benefits of convenience, simple operational procedure, no use of hazardous organic solvents, cheapness and ease of preparation of catalyst.

9,10-Phenanthrenedione as Visible-Light Photoredox Catalyst: A Green Methodology for the Functionalization of 3,4-Dihydro-1,4-Benzoxazin-2-Ones through a Friedel-Crafts Reaction

A visible-light photoredox functionalization of 3,4-dihydro-1,4-benzoxazin-2-ones through a Friedel-Crafts reaction with indoles using an inexpensive organophotoredox catalyst is described. The reaction uses a dual catalytic system that is formed by a photocatalyst simple and cheap, 9,10-phenanthrenedione, and a Lewis acid, Zn(OTf)2. 5W white LEDs are used as visible-light source and oxygen from air as a terminal oxidant, obtaining the corresponding products with good yields. The reaction can be extended to other electron-rich arenes. Our methodology represents one of the most valuable and sustainable approach for the functionalization of 3,4-dihydro-1,4-benzoxazin-2-ones, as compared to the reported procedures. Furthermore, several transformations were carried out, such as the synthesis of the natural product cephalandole A and a tryptophol derivative.

Discovery of DEBIC to correlate P-selectin inhibition and DNA intercalation in cancer therapy and complicated thrombosis

Arterial thrombosis is one of the major complications of cancer and can seriously worsen the prognosis of the patients. These clinical findings encouraged this paper to correlate P-selectin inhibition and DNA intercalation in cancer therapy and complicated thrombosis. By designing and docking 12 derivatives of bisindole- 2-carboxylic acids into the active sites of P-selectin and d(CGATCG)2 9 derivatives were assigned to receive in vivo anti-tumor assay, and finally provided dimethyl 2,2'-[(2,2'-(ethane-1,1-diyl)bis(1H-indole-3,2-diyl)]diacetate (DEBIC) to receive assays. DEBIC intercalated DNA and inhibited proliferation of tumor cells but not non-tumor cells. It slowed tumor growth of S180 mice at a dose of 0.36 μmol/kg, and slowed tumor growth of A549 bearing BABL/C mice at a dose of 8.9 μmol/kg. DEBIC was also found to inhibit arterial thrombosis by down regulating P-selectin effectively at a dose of 0.36 μmol/kg.

Visible-light-induced C(sp3)-H activation for a C-C bond forming reaction of 3,4-dihydroquinoxalin-2(1H)-one with nucleophiles using oxygen with a photoredox catalyst or under catalyst-free conditions

A convenient photocatalyzed oxidative coupling reaction of 4-alkyl-3,4-dihydroquinoxalin-2(1H)-one and its derivatives with a variety of nucleophiles was developed with a ruthenium photoredox catalyst and oxygen under a household compact fluorescent light. With a slower reaction rate, the cross coupling transformation can be achieved in the absence of an external photocatalyst with a similar isolated yield. An application to the synthesis of natural product cephalandole A was also demonstrated.

Visible light-induced aerobic oxidative cross-coupling of glycine derivatives with indoles: a facile access to 3,3′ bisindolylmethanes

A rapid synthesis of 3,3′-bisindolylmethanes is achieved via a photocatalyzed double Friedel–Crafts alkylation reaction between glycine derivatives and indoles.