Structural Design of Blue‐to‐Red Thermally‐Activated Delayed Fluorescence Molecules by Adjusting the Strength between Donor and Acceptor

Styrylpyrimidine chromophores with bulky electron-donating substituents: experimental and theoretical investigation

Styrylpyrimidines with bulky 9,9-dimethylacridan, phenoxazine and phenothiazine electron-donating fragments were designed. Thermally activated delayed fluorescence (TADF) properties were expected for these structures. These chromophores exhibit peculiar emission properties. For 9,9-dimethylacridan and phenoxazine derivatives, a single emission highly sensitive to the polarity is observed in solution whereas for phenothiazine derivative a dual emission is observed in solution and is attributed to the coexistence of quasi-axial (Qax) and quasi-equatorial (Qeq) conformers. This study intends to understand through theoretical and experimental works, why the studied chromophores do not exhibit TADF properties, contrary to what was expected. The absence of phosphorescence both at room temperature and 77 K tends to indicate the impossibility to harvest triplet states in these systems. Wave-function based calculations show that for both conformers of the three chromophores the S1-T1 splitting is significantly larger than 0.2 eV. The second triplet state T2 of Qeq conformers is found very close in energy to the singlet S1 state, but S1 and T2 states possess similar charge transfer characters. This prevents efficient spin-orbit coupling between the states, which is consistent with the absence of TADF.

Highly Efficient Blue Organic Light Emitting Diodes Based on Cyclohexane-Fused Quinoxaline Acceptor

Exploring blue organic light emitting diodes (OLED) is an important but challenging issue. Herein, to achieve blue-shifted emission, cyclohexane is fused to quinoxaline to weaken the electron-withdrawing ability and conjugation degree of the acceptor. As a result, blue to cyan fluorescent emitters of Me-DPA-TTPZ, tBu-DPA-TTPZ, and TPA-TTPZ were designed and synthesized with donors of diphenylamine and triphenylamine, which exhibit high photoluminescence quantum yields and good thermal stability. In OLEDs with emitters of TPA-TTPZ, the sensitized and nonsensitized devices demonstrate deep-blue (449 nm) and blue (468 nm) emission with maximum external quantum efficiency and CIE coordinates of 6.1%, (0.15, 0.10) and 5.1%, (0.17, 0.22), respectively, validating their potential as blue emitters in OLEDs.

Tröger's Base-Derived Thermally Activated Delayed Fluorescence Dopant for Efficient Deep-Blue Organic Light-Emitting Diodes

The development of efficient deep-blue emitters with thermally activated delayed fluorescence (TADF) properties is a highly significant but challenging task in the field of organic light-emitting diode (OLED) applications. Herein, we report the design and synthesis of two new 4,10-dimethyl-6H,12H-5,11-methanodibenzo[b,f][1,5]diazocine (TB)-derived TADF emitters, TB-BP-DMAC and TB-DMAC, which feature distinct benzophenone (BP)-derived acceptors but share the same dimethylacridin (DMAC) donors. Our comparative study reveals that the amide acceptor in TB-DMAC exhibits a significantly weaker electron-withdrawing ability in comparison to that of the typical benzophenone acceptor employed in TB-BP-DMAC. This disparity not only causes a noticeable blue shift in the emission from green to deep blue but also enhances the emission efficiency and the reverse intersystem crossing (RISC) process. As a result, TB-DMAC emits efficient deep-blue delay fluorescence with a photoluminescence quantum yield (PLQY) of 50.4% and a short lifetime of 2.28 μs in doped film. The doped and non-doped OLEDs based on TB-DMAC display efficient deep-blue electroluminescence with spectral peaks at 449 and 453 nm and maximum external quantum efficiencies (EQEs) of 6.1% and 5.7%, respectively. These findings indicate that substituted amide acceptors are a viable option for the design of high-performance deep-blue TADF materials.

Impact of Electron-Donating Groups on Attaining Dual-Emitting Imidazole-Based Donor-Acceptor Materials

Imidazole-based donor-acceptor materials are well known for their polarity-controlled trade-off phenomenon between the localized excitation-based short-wavelength (SW) emission in nonpolar solvents and charge transfer dominated long-wavelength (LW) emission in polar solvents. To attain concurrent SW- and LW-based dual-emission characteristics, a series of imidazole-based donor-acceptor fluorophores (CBImDCN, TPImDCN, PZImDCN) possessing different electron-donating groups such as carbazole, triphenylamine, and phenothiazine linked via the N-position of the imidazole core unit were synthesized and verified by NMR and mass spectroscopic techniques. As a result, the strong donating TPImDCN and PZImDCN exhibited dual emission in different solvents of varying polarity, covering the blue (SW) and green/orange (LW) regions. On the other hand, in contrast, only an SW emission band is observed with the weak donating CBImDCN. Moreover, PZImDCN shows panchromatic emission under 365 nm illumination, while only orange color emission is observed under visible light excitation, revealing two different origins of SW and LW emissions, as also evidenced from DFT calculations. Overall, this work reveals a new approach for attaining concurrent SW and LW emission characteristics from imidazole-based D-A materials and sheds light on the design and development of novel panchromatic emitters with intriguing properties for lighting and display applications.

Thermally Activated Delayed Fluorescence and Room-Temperature Phosphorescence in Materials with Imidazo-pyrazine-5,6-dicarbonitrile Acceptors

Three donor-acceptor compounds based on the imidazo-pyrazine-5,6-dicarbonitrile (IPDC) acceptor were synthesized. The IPDC emitters exhibit blue to near-infrared (NIR) emission with up to 54 % photoluminescent quantum yield. 9,9-Dimethyl-9,10-dihydroacridine (ACR), phenoxazine (POX), and phenothiazine (PTZ) served as electron donors. IPDC-POX displayed NIR emission in toluene solution, while showing room-temperature phosphorescence in the solid state. IPDC-ACR exhibited yellow thermally activated delayed fluorescence. Interestingly, dual-emissive behavior as well as excitation-dependent thermally activated delayed fluorescence (TADF) was found for IPDC-PTZ, arising from the two conformers of phenothiazine derivatives. Overall, this work describes a novel strong electron acceptor from the fusion of imidazole, pyrazine, and nitrile functional groups into one conjugated heterocycle for materials exhibiting NIR emission, TADF, and/or room-temperature phosphorescence (RTP).

Regioselective electrophilic aromatic borylation as a method for synthesising sterically hindered benzothiadiazole fluorophores

Regioselective stepwise phenylation of 4,7-diarylbenzo[c][1,2,5]thiadiazole fluorophores has been achieved through a facile one-pot, three-step synthetic strategy involving sequential borylation, hydroxydechlorination and Suzuki-Miyaura cross-coupling reactions. Crucial to the selectivity was the use of BCl₃ to regioselectively install a boronic acid group in the ortho-position of only one of the diaryl groups. The subsequent introduction of ortho-phenyl groups through Suzuki-Miyaura cross-coupling gave rise to twisted structures with hindered intramolecular rotation, providing a structural lever with which the fluorophore absorption and emission properties could be adjusted.

Benchmarking of Density Functionals for the Description of Optical Properties of Newly Synthesized π-Conjugated TADF Blue Emitters

Computational modeling of the optical characteristics of organic molecules with potential for thermally activated delayed fluorescence (TADF) may assist markedly the development of more efficient emitting materials for organic light-emitting diodes. Recent theoretical studies in this area employ mostly methods from density functional theory (DFT). In order to obtain accurate predictions within this approach, the choice of a proper functional is crucial. In the current study, we focus on testing the performance of a set of DFT functionals for estimation of the excitation and emission energy and the excited singlet-triplet energy gap of three newly synthesized compounds with capacity for TADF. The emitters are designed specifically to enable charge transfer by π-electron conjugation, at the same time possessing high-energy excited triplet states. The functionals chosen for testing are from various groups ranging from gradient-corrected through global hybrids to range-separated ones. The results show that the monitored optical properties are especially sensitive to how the long-range part of the exchange energy is treated within the functional. The accurate functional should also be able to provide well balanced distribution of the π-electrons among the molecular fragments. Global hybrids with moderate (less than 0.4) share of exact exchange (B3LYP, PBE0) and the meta-GGA HSE06 are outlined as the best performing methods for the systems under study. They can predict all important optical parameters correctly, both qualitatively and quantitatively.

Room-Temperature Phosphorescence of Nicotinic Acid and Isonicotinic Acid: Efficient Intermolecular Hydrogen-Bond Interaction in Molecular Array

Pure organic room-temperature phosphorescence (RTP) has attracted wide interest due to its unique advantages and promising applications. However, it is still challenging to develop efficient RTP through precise molecular design. In this work, RTP is observed from two simple aromatic acids, nicotinic acid (NA) and isonicotinic acid (INA), in the crystal state. Single crystal structure analysis indicates that an intense hydrogen bond between the pyridine nitrogen atom and the carboxyl group results in zigzag and linear molecular packing modes in NA and INA crystal. From theoretical calculations, the hydrogen bond can effectively promote the intersystem crossing process and stabilize triplet exciton. The identical molecular orientations in the molecular array contribute to the larger dipole moment of INA as compared to that of NA, which should be responsible for the red-shifted photoluminescence and RTP of INA. When the hydrogen bond is destructed by grinding or deprotonation, the RTP decreases sharply, further confirming the crucial role of the hydrogen bond on RTP.

4,7-Diarylbenzo[c][1,2,5]thiadiazoles as fluorophores and visible light organophotocatalysts

A library of 26 electron donor-acceptor organophotocatalysts based on the benzo[c][1,2,5]thiadiazole (BTZ) group has been developed. These visible light organophotocatalysts were then used in a Minisci-type alkylation of heteroarenes under both batch and continuous flow conditions.

Nickel Mediated Enantioselective Photoredox Allylation of Aldehydes with Visible Light

Here we report a practical, highly enantioselective photoredox allylation of aldehydes mediated by chiral nickel complexes with commercially available allyl acetate as the allylating agent. The methodology allows the clean stereoselective allylation of aldehydes in good to excellent yields and up to 93% e.e. using a catalytic amount of NiCl 2 (glyme) in the presence of the chiral aminoindanol-derived bis(oxazoline) as the chiral ligand. The photoredox system is constituted by the organic dye 3DPAFIPN and a Hantzsch's ester as the sacrificial reductant. The reaction proceeds under visible light irradiation (blue LEDs, 456 nm) at 8-12 °C with excellent stereoselectivities. Compared to other published procedures, no metal reductants (such as Zn or Mn), additives (e.g. CuI) or air-sensitive Ni(COD) 2 are necessary for this reaction. Accurate DFT calculations and photophysical experiments have clarified the mechanistic picture of this stereoselective allylation reaction showing a key role played by Hantzsch's ester for the turnover of the catalyst.

Diversity of Luminescent Metal Complexes in OLEDs: Beyond Traditional Precious Metals

Organic light-emitting diodes (OLED) have attracted increasing attention due to their excellent properties, such as self-luminosity, high color gamut and flexibility, and potential applications in display, wearable devices and lighting. The emitters are the most important composition in OLEDs, mainly classified into fluorescent compounds (first generation), metal phosphorescent complexes (second generation), and thermally activated delayed fluorescence (TADF) materials (third generation). In this review, we summarize the advances of novel emitters of organic metal complexes in the last decade, focusing on coinage metals (Cu, Ag, and Au) and non-precious metals (Al, Zn, W, and alkali metal). Also, the design strategy of d¹⁰ and Au(III) complexes was discussed. We aim to provide guidance for exploring efficient metal complexes beyond traditional phosphorescent complexes.

Nonconjugated Triptycene-Spaced Donor-Acceptor-Type Emitters Showing Thermally Activated Delayed Fluorescence via Both Intra- and Intermolecular Charge-Transfer Transitions

Thermally activated delayed fluorescence (TADF) emitters have aroused considerable attention, particularly for their great potential in organic light-emitting diodes (OLEDs). In typical TADF molecules, intramolecular charge transfer (CT) between electron-donor (D) and electron-acceptor (A) moieties is the dominant transition. Actually, CT transitions can possibly occur between different molecules as well. Herein, we used a nonconjugated triptycene (TPE) moiety to space D and A moieties and developed two novel emitters tBuDMAC-TPE-TRZ and tBuDMAC-TPE-TTR to explore the roles of intra- and intermolecular CT transitions. Along with weak intramolecular CT transitions, intermolecular CT transitions are dominant for tBuDMAC-TPE-TRZ and tBuDMAC-TPE-TTR neat films. Particularly, tBuDMAC-TPE-TRZ showed a high maximum external quantum efficiency of 10.0% in a nondoped solution-processed OLED, which was evidently higher than that of a corresponding 10 wt % tBuDMAC-TPE-TRZ-doped OLED with 4,4',4″-tris(carbazol-9-yl)triphenylamine (TCTA) as the host matrix. The results prove that intermolecular CT transitions indeed participate in the CT transition process in these systems and they are helpful to enhance the electroluminescence performance of emitting systems with weak intramolecular CT transitions.

A TADF Emitter Featuring Linearly Arranged Spiro-Donor and Spiro-Acceptor Groups: Efficient Nondoped and Doped Deep-Blue OLEDs with CIEy <0.1

Reported herein is a molecular design strategy of deep-blue emitters for resolving the lack of highly efficient deep-blue organic light-emitting diodes (OLEDs) featuring CIE_y (Commission Internationale de l'Eclairage) color coordinates matching the display requirements (<0.1). The strategy is to combine weak spiro-donor and spiro-acceptor groups into a linear donor-π-acceptor type of thermally-activated delayed fluorescence molecule through a sterically bulky π-spacer. The strategy endows an emitter with deep-blue emission, a narrower emission bandwidth (51 nm in toluene), a high photoluminescence quantum yield (0.95 in toluene), weak concentration quenching, and efficient triplet-exciton utilization, which are all attractive characteristics for emitters of deep-blue OLEDs with lower CIE_y coordinates. Owing to the rational design, the emitter has realized not only highly efficient doped deep-blue OLEDs with external quantum efficiencies (EQEs) up to 25.4 % and CIE_y less than 0.1 but also so far the most efficient nondoped deep-blue OLED (EQE up to 22.5 %) with CIE_y less than 0.1.