Manual pressure distribution patterns of knuckle-walking apes: Manual Pressure Patterns of African Apes

Differences in vertebral bone density between African apes

OBJECTIVES

Low-energy vertebral fractures are a common health concern, especially in elderly people. Interestingly, African apes do not seem to experience as many vertebral fractures and the low-energy ones are even rarer. One potential explanation for this difference is the lower bone density in humans. Yet, only limited research has been done on the vertebral bone density of the great apes and these have mainly included only single vertebrae. Hence the study aim is to expand our understanding of the vertebral microstructure of African apes in multiple spinal segments.

MATERIALS

Bone density in the vertebral body of C7, T12, and L3 was measured from 32 Pan troglodytes and 26 Gorilla gorilla using peripheral quantitative computed tomography (pQCT).

RESULTS

There was a clear difference between the three individual vertebrae and consequently the spinal segments in terms of trabecular density and cortical density and thickness. The variation of these bone parameters between the vertebrae differed between the apes but was also different from those reported for humans. The chimpanzees were observed to have overall higher trabecular density, but gorillas had higher cortical density and thickness. Cortical thickness had a relatively strong association with the vertebral size.

DISCUSSION

Despite the similarity in locomotion and posture, the results show slight differences in the bone parameters and their variation between spinal segments in African apes. This variation also differs from humans and appears to indicate a complex influence of locomotion, posture, and body size on the different spinal segments.

Trabecular bone structure of the proximal capitate in extant hominids and fossil hominins with implications for midcarpal joint loading and the dart-thrower's motion

OBJECTIVES

This research examines whether the distribution of trabecular bone in the proximal capitates of extant hominids, as well as several fossil hominin taxa, is associated with the oblique path of the midcarpal joint known as the dart-thrower's motion (DTM).

MATERIALS AND METHODS

We analyzed proximal capitates from extant (Pongo n = 12; Gorilla n = 11; Pan n = 10; fossil and recent Homo sapiens n = 29) and extinct (Australopithecus sediba n = 2; Homo naledi n = 1; Homo floresiensis n = 2; Neandertals n = 3) hominids using a new canonical holistic morphometric analysis, which quantifies and visualizes the distribution of trabecular bone using relative bone volume as a fraction of total volume (rBV/TV).

RESULTS

Homo sapiens and Neandertals had a continuous band of high rBV/TV that extended across the scaphoid, lunate, and hamate subarticular regions, but other fossil hominins and extant great apes did not. A. sediba expressed a distinct combination of human-like and Pan-like rBV/TV distribution. Both H. floresiensis and H. naledi had high rBV/TV on the ulnar-side of the capitate but low rBV/TV on the radial-side.

CONCLUSION

The proximal capitates of H. sapiens and Neandertals share a distinctive distribution of trabecular bone that suggests that these two species of Homo regularly load(ed) their midcarpal joints along the full extent of the oblique path of the DTM. The observed pattern in A. sediba suggests that human-like stress at the capito-scaphoid articular surface was combined with Pan-like wrist postures, whereas the patterns in H. floresiensis and H. naledi suggest their midcarpal joints were loaded differently from that of H. sapiens and Neandertals.

Ulnar shape of extant primates: Functional signals and covariation with triquetrum shape

OBJECTIVES

In this study, we investigated the shape differences of the distal ulna in a phylogenetic context among a broad range of primate taxa. Furthermore, we evaluated covariation between ulnar and triquetrum shape and a possible association between ulnar shape and locomotor behavior.

MATERIALS AND METHODS

We applied 3D geometric morphometrics on a large dataset comprising the distal ulna of 124 anthropoid primate specimens belonging to 12 different genera. For each species, a mean shape was calculated using 11 Procrustes-aligned surface landmarks on the distal ulna. These mean shapes are used in a bgPCA, pPCA, and PACA and 3D morphs were used to visualize more subtle differences between taxa. A p2B-PLS analysis was performed to test the covariance between distal ulnar and triquetrum shape.

RESULTS

The results show that more closely related species exhibit a similar distal ulnar shape. Overall, extant hominid ulnae show a shape shift compared to those of extant monkeys and hylobatids. This includes a shortening of the ulnar styloid process and dorspalmarly widening of the ulnar head, shape characteristics that are independent of phylogeny. Within the hominids, Pongo pygmaeus seem to possess the most plesiomorphic distal ulnar shape, while Gorilla and Homo sapiens display the most derived distal ulna. Cercopithecoids, hylobatids, and P. pygmaeus are characterized by a relatively deep ECU groove, which is a shape trait dependent of phylogeny. Although there was no significant covariation between distal ulnar shape and triquetrum shape, the shape differences of the distal ulna between the different primate taxa reveal a possible link with locomotor behavior.

CONCLUSIONS

The comparative analyses of this study reveal different shape trends in a phylogenetic context. Highly arboreal primates, such as hylobatids and Ateles fusciceps, show a distal ulnar morphology that appears to be adapted to tensile and torsional forces. In primates that use their wrist under more compressive conditions, such as quadrupedal cercopithecoids and great apes, the distal ulnar morphology seems to reflect increased compressive forces. In modern humans, the distal ulnar shape can be associated to enhanced manipulative skills and power grips. There was no significant covariation between distal ulnar shape and triquetrum shape, probably due to the variation in the amount of contact between the triquetrum and ulna. In combination with future research on wrist mobility in diverse primate taxa, the results of this study will allow us to establish form-function relationships of the primate wrist and contribute towards an evidence-based interpretation of fossil remains.

Principal component and linear discriminant analyses for the classification of hominoid primate specimens based on bone shape data

In this study, we tested the hypothesis that machine learning methods can accurately classify extant primates based on triquetrum shape data. We then used this classification tool to observe the affinities between extant primates and fossil hominoids. We assessed the discrimination accuracy for an unsupervised and supervised learning pipeline, i.e. with principal component analysis (PCA) and linear discriminant analysis (LDA) feature extraction, when tasked with the classification of extant primates. The trained algorithm is used to classify a sample of known fossil hominoids. For the visualization, PCA and uniform manifold approximation and projection (UMAP) are used. The results show that the discriminant function correctly classified the extant specimens with an F1-score of 0.90 for both PCA and LDA. In addition, the classification of fossil hominoids reflects taxonomy and locomotor behaviour reported in literature. This classification based on shape data using PCA and LDA is a powerful tool that can discriminate between the triquetrum shape of extant primates with high accuracy and quantitatively compare fossil and extant morphology. It can be used to support taxonomic differentiation and aid the further interpretation of fossil remains. Further testing is necessary by including other bones and more species and specimens per species extinct primates.

Carpal allometry of African apes among mammals

OBJECTIVES

Morphological variation in African ape carpals has been used to support the idea that Pan and Gorilla evolved knuckle-walking independently. Little work, however, has focused on the effect of body mass on carpal morphology. Here, we compare carpal allometry in Pan and Gorilla to that of other quadrupedal mammals with similar body mass differences. If allometric trends in Pan and Gorilla carpals mirror those of other mammals with similar body mass variation, then body mass differences may provide a more parsimonious explanation for African ape carpal variation than the independent evolution of knuckle-walking.

MATERIALS AND METHODS

Three linear measurements were collected on the capitate, hamate, lunate, and scaphoid (or scapholunate) of 39 quadrupedal species from six mammalian families/subfamilies. Relationships between linear measurements and estimated body mass were analyzed using reduced major axis regression. Slopes were compared to 0.33 for isometry.

RESULTS

Within Hominidae, higher body mass taxa (Gorilla) have relatively anteroposteriorly wider, mediolaterally wider, and/or proximodistally shorter capitates, hamates, and scaphoids than low body mass taxa (Pan). These allometric relationships are mirrored in most, but not all, mammalian families/subfamilies included in the analysis.

CONCLUSIONS

Within most mammalian families/subfamilies, carpals of high body mass taxa are proximodistally shorter, anteroposteriorly wider, and mediolaterally wider than those of low body mass taxa. These distinctions may be caused by the need to accommodate relatively higher forelimb loading associated with greater body mass. Because these trends occur within multiple mammalian families/subfamilies, some carpal variation in Pan and Gorilla is consistent with body mass differences.

A geometric morphometric approach to investigate primate proximal phalanx diaphysis shape

Current approaches to quantify phalangeal curvature assume that the long axis of the bone's diaphysis approximates the shape of a portion of a circle (included angle method) or a parabola (second-degree polynomial method). Here we developed, tested, and employed an alternative geometric morphometrics-based approach to quantify diaphysis shape of proximal phalanges in humans, apes and monkeys with diverse locomotor behaviors. 100 landmarks of the central longitudinal axis were extracted from 3D surface models and analyzed using 2DGM methods, including Generalized Procrustes Analyses. Principal components analyses were performed and PC1 scores (>80% of variation) represented the dorsopalmar shape of the bone's central longitudinal axis and separated taxa consistently and in accord with known locomotor behavioral profiles. The most suspensory taxa, including orangutans, hylobatids and spider monkeys, had significantly lower PC1 scores reflecting the greatest amounts of phalangeal curvature. In contrast, bipedal humans and the quadrupedal cercopithecoid monkeys sampled (baboons, proboscis monkeys) exhibited significantly higher PC1 scores reflecting flatter phalanges. African ape (gorillas, chimpanzees and bonobos) phalanges fell between these two extremes and were not significantly different from each other. PC1 scores were significantly correlated with both included angle and the a coefficient of a second-degree polynomial calculated from the same landmark dataset, but had a significantly higher correlation with included angles. Our alternative approach for quantifying diaphysis shape of proximal phalanges to investigate dorsopalmar curvature is replicable and does not assume a priori either a circle or parabola model of shape, making it an attractive alternative compared with existing methodologies.

Ontogenetic changes to metacarpal trabecular bone structure in mountain and western lowland gorillas

The trabecular bone morphology of adult extant primates has been shown to reflect mechanical loading related to locomotion. However, ontogenetic studies of humans and other mammals suggest an adaptive lag between trabecular bone response and current mechanical loading patterns that could result in adult trabecular bone morphology reflecting juvenile behaviours. This study investigates ontogenetic changes in the trabecular bone structure of the third metacarpal of mountain gorillas (Gorilla beringei beringei; n = 26) and western lowland gorillas (Gorilla gorilla gorilla; n = 26) and its relationship to expected changes in locomotor loading patterns. Results show that trabecular bone reflects predicted mechanical loading throughout ontogeny. Bone volume fraction, trabecular thickness and trabecular number are low at birth and increase with age, although degree of anisotropy remains relatively stable throughout ontogeny. A high concentration of bone volume fraction can be observed in the distopalmar region of the third metacarpal epiphysis in early ontogeny, consistent with the high frequency of climbing, suspensory and other grasping behaviours in young gorillas. High trabecular bone concentration increases dorsally in the epiphysis during the juvenile period as terrestrial knuckle-walking becomes the primary form of locomotion. However, fusion of the epiphysis does not take place until 10-11 years of age, and overall trabecular structure does not fully reflect the adult pattern until 12 years of age, indicating a lag between adult-like behaviours and adult-like trabecular morphology. We found minimal differences in trabecular ontogeny between mountain and western lowland gorillas, despite presumed variation in the frequencies of arboreal locomotor behaviours. Altogether, ontogenetic changes in Gorilla metacarpal trabecular structure reflect overall genus-level changes in locomotor behaviours throughout development, but with some ontogenetic lag that should be considered when drawing functional conclusions from bone structure in extant or fossil adolescent specimens.

Kinematic and dynamic aspects of chimpanzee knuckle walking: finger flexors likely do not buffer ground impact forces

Chimpanzees are knuckle walkers, with forelimbs contacting the ground by the dorsum of the finger's middle phalanges. As these muscular apes are given to high-velocity motions, the question arises of how the ground reaction forces are buffered so that no damage ensues in the load-bearing fingers. In the literature, it was hypothesized that the finger flexors help buffer impacts because in knuckle stance the metacarpophalangeal joints (MCPJs) are strongly hyperextended, which would elongate the finger flexors. This stretching of the finger flexor muscle-tendon units would absorb impact energy. However, EMG studies did not report significant finger flexor activity in knuckle walking. Although these data by themselves question the finger flexor impact buffering hypothesis, the present study aimed to critically investigate the hypothesis from a biomechanical point of view. Therefore, various aspects of knuckle walking were modeled and the finger flexor tendon displacements in the load-bearing fingers were measured in a chimpanzee cadaver hand, of which also an MRI was taken in knuckle stance. The biomechanics do not support the finger flexor impact buffering hypothesis. In knuckle walking, the finger flexors are not elongated to lengths where passive strain forces would become important. Impact buffering by large flexion moments at the MCPJs from active finger flexors would result in impacts at the knuckles themselves, which is dysfunctional for various biomechanical reasons and does not occur in real knuckle walking. In conclusion, the current biomechanical analysis in accumulation of previous EMG findings suggests that finger flexors play no role in impact buffering in knuckle walking.

Trabecular structure of the elbow reveals divergence in knuckle-walking biomechanical strategies of African apes

African apes engage in a distinct form of locomotion called knuckle-walking, but there is much ambiguity as to when and how this locomotor behavior evolved. This study aims to elucidate potential differences in knuckle-walking elbow posture and loading in African apes through the study of trabecular bone. Using a whole-epiphysis approach, we quantified variation in the trabecular structure of the distal humerus of chimpanzees, western lowland gorillas, and mountain gorillas in comparison to orang-utans, siamangs, and a sample of Old and New World monkeys. Results demonstrate differences in the distribution of trabecular bone within the distal humerus that are consistent across taxa that habitually use a flexed-elbow posture in comparison to those that use an extended elbow during locomotion. Western lowland gorillas show an extended-elbow pattern consistent with the straight forelimb position during knuckle-walking, whereas chimpanzees show a flexed-elbow pattern. Unexpectedly, mountain gorillas show an intermediate pattern between their western counterparts and chimpanzees. The differences found in elbow joint posture between chimpanzees and gorillas, and between gorilla species, point to diversification in the knuckle-walking biomechanical strategies among African apes, which has implications in the debate regarding the locomotor behavior from which human bipedalism arose.

Functional signals and covariation in triquetrum and hamate shape of extant primates using 3D geometric morphometrics

In this study, we want to investigate the covariation in the shape of two carpal bones, the triquetrum and hamate, and the possible association with locomotor behavior in a broad range of primate taxa. We applied 3D Geometric Morphometrics on a large data set comprising 309 anthropoid primates of 12 different genera. Principal component analyses were performed on the covariance matrix of 18 (triquetrum) and 23 (hamate) Procrustes-aligned surface landmarks. A two-block partial least square analysis was done to test the covariance between triquetrum and hamate shape, without relying on the predictive models implicit in regression analyses. The results show that the carpal shape of quadrupedal anthropoids, which mainly use their wrist under compressive conditions, differs from that of suspensory primates as their wrist is possibly subjected to tensile and torsional forces. Within the hominids, differences in shape also distinguish more terrestrial from more arboreal species. Even within the great apes, we are able to capture shape differences between species of the same genus. In combination with behavioral and biomechanical studies, the results of this research can be used to establish form-function relationships of the primate hand which will aid the functional interpretation of primate fossil remains.

Cortical and trabecular bone structure of the hominoid capitate

Morphological variation in the hominoid capitate has been linked to differences in habitual locomotor activity due to its importance in movement and load transfer at the midcarpal joint proximally and carpometacarpal joints distally. Although the shape of bones and their articulations are linked to joint mobility, the internal structure of bones has been shown experimentally to reflect, at least in part, the loading direction and magnitude experienced by the bone. To date, it is uncertain whether locomotor differences among hominoids are reflected in the bone microarchitecture of the capitate. Here, we apply a whole‐bone methodology to quantify the cortical and trabecular architecture (separately and combined) of the capitate across bipedal (modern Homo sapiens), knuckle‐walking (Pan paniscus, Pan troglodytes, Gorilla sp.), and suspensory (Pongo sp.) hominoids (n = 69). It is hypothesized that variation in bone microarchitecture will differentiate these locomotor groups, reflecting differences in habitual postures and presumed loading force and direction. Additionally, it is hypothesized that trabecular and cortical architecture in the proximal and distal regions, as a result of being part of mechanically divergent joints proximally and distally, will differ across these portions of the capitate. Results indicate that the capitate of knuckle‐walking and suspensory hominoids is differentiated from bipedal Homo primarily by significantly thicker distal cortical bone. Knuckle‐walking taxa are further differentiated from suspensory and bipedal taxa by more isotropic trabeculae in the proximal capitate. An allometric analysis indicates that size is not a significant determinate of bone variation across hominoids, although sexual dimorphism may influence some parameters within Gorilla. Results suggest that internal trabecular and cortical bone is subjected to different forces and functional adaptation responses across the capitate (and possibly other short bones). Additionally, while separating trabecular and cortical bone is normal protocol of current whole‐bone methodologies, this study shows that when applied to carpals, removing or studying the cortical bone separately potentially obfuscates functionally relevant signals in bone structure.

Insertion sites in manual proximal phalanges of African apes and modern humans

OBJECTIVES

The primary aim of this study was to describe the insertion sites of the ligaments holding the flexor digitorum profundus and superficialis muscles (flexor ridges) in proximal phalanges 2-5 of African apes and modern humans. To interpret differences in flexor ridge size based on general behavioral differences among taxa.

MATERIALS AND METHODS

We analyzed 3D models of manual proximal phalanges 2-5 from 29 gorillas (Gorilla beringei and Gorilla gorilla), 30 chimpanzees (Pan troglodytes) and 36 recent modern humans. Flexor ridges (mm²) were compared within and across genera.

RESULTS

Gorillas and chimpanzees had larger flexor ridges for phalanges 2-4 than humans and this difference subsists when controlling for body size. Each genus had a unique insertion size pattern across the digits, with the most heterogeneous pattern found in chimpanzees, followed by humans, and lastly gorillas. These patterns corresponded strongly to the differences in the size of the phalanges within each genus, except for phalanx 5 in humans, which had a larger flexor ridge than expected.

DISCUSSION

When comparing these genera, the flexor ridges signal differences between taxa that use their hands for manipulation and locomotion (gorillas and chimpanzees) and taxa that use them exclusively for manipulation (humans). This functional signal was also apparent in the PP5 of humans, whose larger FR may be indicating the high recruitment of this digit during forceful precision grip characteristic of humans.

The biomechanics of knuckle-walking: 3-D kinematics of the chimpanzee and macaque wrist, hand and fingers

The origin and evolution of knuckle-walking has long been a key focus in understanding African ape, including human, origins. Yet, despite numerous studies documenting morphological characteristics potentially associated with knuckle-walking, little quantitative three-dimensional (3-D) data exist of forelimb motion during knuckle-walking. Nor do any comparative 3-D data exist for hand postures used during quadrupedalism in monkeys. This lack of data has limited the testability of proposed adaptations for knuckle-walking in African apes. This study presents the first 3-D kinematic data of the wrist, hand and metacarpophalangeal joints during knuckle-walking in chimpanzees and in macaques using digitigrade and palmigrade hand postures. These results clarify the unique characteristics of, and commonalities between, knuckle-walking and digitigrady/palmigrady in multiple planes of motion. Notably, chimpanzees utilized more wrist ulnar deviation than any macaque hand posture. Maximum extension of the chimpanzee wrist was slight (5-20 deg) and generally overlapped with macaque digitigrady. Metacarpophalangeal joint motion displayed distinct differences between digits in both species, likely related to the timing of force application. These data also reveal that maximum metacarpophalangeal extension angles during knuckle-walking (26-59 deg) were generally higher than previously considered. In macaques, maximum metacarpophalangeal extension during digitigrady and palmigrady overlapped for most digits, highlighting additional complexity in the interpretation of skeletal features that may be related to limiting metacarpophalangeal motion. Most importantly, however, these new 3-D data serve as a fundamental dataset with which evaluation of proposed musculoskeletal adaptations for knuckle-walking can be tested.

Metacarpophalangeal joint loads during bonobo locomotion: model predictions versus proxies

The analysis of internal trabecular and cortical bone has been an informative tool for drawing inferences about behaviour in extant and fossil primate taxa. Within the hand, metacarpal bone architecture has been shown to correlate well with primate locomotion; however, the extent of morphological differences across taxa is unexpectedly small given the variability in hand use. One explanation for this observation is that the activity-related differences in the joint loads acting on the bone are simply smaller than estimated based on commonly used proxies (i.e. external loading and joint posture), which neglect the influence of muscle forces. In this study, experimental data and a musculoskeletal finger model are used to test this hypothesis by comparing differences between climbing and knuckle-walking locomotion of captive bonobos (Pan paniscus) based on (i) joint load magnitude and direction predicted by the models and (ii) proxy estimations. The results showed that the activity-related differences in predicted joint loads are indeed much smaller than the proxies would suggest, with joint load magnitudes being almost identical between the two locomotor modes. Differences in joint load directions were smaller but still evident, indicating that joint load directions might be a more robust indicator of variation in hand use than joint load magnitudes. Overall, this study emphasizes the importance of including muscular forces in the interpretation of skeletal remains and promotes the use of musculoskeletal models for correct functional interpretations.

Trabecular architecture of the capitate and third metacarpal through ontogeny in chimpanzees (Pan troglodytes) and gorillas (Gorilla gorilla)

Chimpanzees (Pan troglodytes) and gorillas (Gorilla gorilla) both knuckle-walk in adulthood but are known to develop their locomotor strategies differently. Using dentally defined age-groups of both Pan and Gorilla and behavioral data from the literature, this study presents an internal trabecular bone approach to better understand the morphological ontogeny of knuckle-walking in these taxa. Capitate and third metacarpal bones were scanned by μCT at 23-43 μm resolution with scaled volumes of interest placed centrally within the head of the capitate and base of the third metacarpal. Trabecular measures related to activity level (size-adjusted bone volume/total volume, trabecular number, and bone surface area/bone volume) met expectations of decreasing through ontogeny in both taxa. Degree of anisotropy did not show statistical support for predicted species differences, but this may be due to the sample size as observed changes through ontogeny reflect expected trends in the capitate. Analyses of principal trabecular orientation corroborated known behavioral differences related to variation of hand use in these taxa, but only Pan showed directional patterning associated with suggested wrist posture. Assessment of allometry showed that the trabecular bone of larger animals is characterized by fewer and thinner trabeculae relative to bone size. In combination, these findings confirm the efficacy of trabecular bone in reflecting locomotor ontogeny differences between closely related taxa. These techniques show promise for use within the hominin fossil record, particularly for taxa hypothesized to be arboreal in some capacity.

Trabecular variation in the first metacarpal and manipulation in hominids

OBJECTIVES

The dexterity of fossil hominins is often inferred by assessing the comparative manual anatomy and behaviors of extant hominids, with a focus on the thumb. The aim of this study is to test whether trabecular structure is consistent with what is currently known about habitually loaded thumb postures across extant hominids.

MATERIALS AND METHODS

We analyze first metacarpal (Mc1) subarticular trabecular architecture in humans (Homo sapiens, n = 10), bonobos (Pan paniscus, n = 10), chimpanzees (Pan troglodytes, n = 11), as well as for the first time, gorillas (Gorilla gorilla gorilla, n = 10) and orangutans (Pongo sp., n = 1, Pongo abelii, n = 3 and Pongo pygmaeus, n = 5). Using a combination of subarticular and whole-epiphysis approaches, we test for significant differences in relative trabecular bone volume (RBV/TV) and degree of anisotropy (DA) between species.

RESULTS

Humans have significantly greater RBV/TV on the radiopalmar aspects of both the proximal and distal Mc1 subarticular surfaces and greater DA throughout the Mc1 head than other hominids. Nonhuman great apes have greatest RBV/TV on the ulnar aspect of the Mc1 head and the palmar aspect of the Mc1 base. Gorillas possessed significantly lower DA in the Mc1 head than any other taxon in our sample.

DISCUSSION

These results are consistent with abduction of the thumb during forceful "pad-to-pad" precision grips in humans and, in nonhuman great apes, a habitually adducted thumb that is typically used in precision and power grips. This comparative context will help infer habitual manipulative and locomotor grips in fossil hominins.

Metacarpal trabecular bone varies with distinct hand-positions used in hominid locomotion

Trabecular bone remodels during life in response to loading and thus should, at least in part, reflect potential variation in the magnitude, frequency and direction of joint loading across different hominid species. Here we analyse the trabecular structure across all non-pollical metacarpal distal heads (Mc2-5) in extant great apes, expanding on previous volume of interest and whole-epiphysis analyses that have largely focused on only the first or third metacarpal. Specifically, we employ both a univariate statistical mapping and a multivariate approach to test for both inter-ray and interspecific differences in relative trabecular bone volume fraction (RBV/TV) and degree of anisotropy (DA) in Mc2-5 subchondral trabecular bone. Results demonstrate that whereas DA values only separate Pongo from African apes (Pan troglodytes, Pan paniscus, Gorilla gorilla), RBV/TV distribution varies with the predicted loading of the metacarpophalangeal (McP) joints during locomotor behaviours in each species. Gorilla exhibits a relatively dorsal distribution of RBV/TV consistent with habitual hyper-extension of the McP joints during knuckle-walking, whereas Pongo has a palmar distribution consistent with flexed McP joints used to grasp arboreal substrates. Both Pan species possess a disto-dorsal distribution of RBV/TV, compatible with multiple hand postures associated with a more varied locomotor regime. Further inter-ray comparisons reveal RBV/TV patterns consistent with varied knuckle-walking postures in Pan species in contrast to higher RBV/TV values toward the midline of the hand in Mc2 and Mc5 of Gorilla, consistent with habitual palm-back knuckle-walking. These patterns of trabecular bone distribution and structure reflect different behavioural signals that could be useful for determining the behaviours of fossil hominins.

Unexpected terrestrial hand posture diversity in wild mountain gorillas

OBJECTIVES

Gorillas, along with chimpanzees and bonobos, are ubiquitously described as 'knuckle-walkers.' Consequently, knuckle-walking (KW) has been featured pre-eminently in hypotheses of the pre-bipedal locomotor behavior of hominins and in the evolution of locomotor behavior in apes. However, anecdotal and behavioral accounts suggest that mountain gorillas may utilize a more complex repertoire of hand postures, which could alter current interpretations of African ape locomotion and its role in the emergence of human bipedalism. Here we documented hand postures during terrestrial locomotion in wild mountain gorillas to investigate the frequency with which KW and other hand postures are utilized in the wild.

MATERIALS AND METHODS

Multiple high-speed cameras were used to record bouts of terrestrial locomotion of 77 habituated mountain gorillas at Bwindi Impenetrable National Park (Uganda) and Volcanoes National Park (Rwanda).

RESULTS

We captured high-speed video of hand contacts in 8% of the world's population of mountain gorillas. Our results reveal that nearly 40% of these gorillas used "non-KW" hand postures, and these hand postures constituted 15% of all hand contacts. Some of these "non-KW" hand postures have never been documented in gorillas, yet match hand postures previously identified in orangutans.

DISCUSSION

These results highlight a previously unrecognized level of hand postural diversity in gorillas, and perhaps great apes generally. Although present at lower frequencies than KW, we suggest that the possession of multiple, versatile hand postures present in wild mountain gorillas may represent a shared feature of the African ape and human clade (or even great ape clade) rather than KW per se.

Hand pressures during arboreal locomotion in captive bonobos (Pan paniscus)

Evolution of the human hand has undergone a transition from use during locomotion to use primarily for manipulation. Previous comparative morphological and biomechanical studies have focused on potential changes in manipulative abilities during human hand evolution, but few have focused on functional signals for arboreal locomotion. Here, we provide this comparative context though the first analysis of hand loading in captive bonobos during arboreal locomotion. We quantify pressure experienced by the fingers, palm and thumb in bonobos during vertical locomotion, suspension and arboreal knuckle-walking. Results show that pressure experienced by the fingers is significantly higher during knuckle-walking compared with similar pressures experienced by the fingers and palm during suspensory and vertical locomotion. Peak pressure is most often experienced at or around the third digit in all locomotor modes. Pressure quantified for the thumb is either very low or absent, despite the thumb making contact with the substrate during all suspensory and vertical locomotor trials. Unlike chimpanzees, the bonobos do not show a rolling pattern of digit contact with the substrate during arboreal knuckle-walking but, instead, digits 3 and 4 typically touch down first and digit 5 almost always made contact with the substrate. These results have implications for interpreting extant and fossilised hand morphology; we expect bonobo (and chimpanzee) bony morphology to primarily reflect the biomechanical loading of knuckle-walking, while functional signals for arboreal locomotion in fossil hominins are most likely to appear in the fingers, particularly digit 3, and least likely to appear in the morphology of the thumb.

Kinematics of the anthropoid os centrale and the functional consequences of scaphoid-centrale fusion in African apes and hominins

In most primates, the os centrale is interposed between the scaphoid, trapezoid, trapezium, and head of the capitate, thus constituting a component of the wrist's midcarpal complex. Scaphoid-centrale fusion is among the clearest morphological synapomorphies of African apes and hominins. Although it might facilitate knuckle-walking by increasing the rigidity and stability of the radial side of the wrist, the exact functional significance of scaphoid-centrale fusion is unclear. If fusion acts to produce a more rigid radial wrist that stabilizes the hand and limits shearing stresses, then in taxa with a free centrale, it should anchor ligaments that check extension and radial deviation, but exhibit motion independent of the scaphoid. Moreover, because the centrale sits between the scaphoid and capitate (a major stabilizing articulation), scaphoid-centrale mobility should correlate with scaphocapitate mobility in extension and radial deviation. To test these hypotheses, the centrale's ligamentous binding was investigated via dissection in Pongo and Papio, and the kinematics of the centrale were quantified in a cadaveric sample of anthropoids (Pongo sp., Ateles geoffroyi, Colobus guereza, Macaca mulatta, and Papio anubis) using a computed-tomography-based method to track wrist-bone motion. Results indicate that the centrale rotates freely relative to the scaphoid in all taxa. However, centrale mobility is only correlated with scaphocapitate mobility during extension in Pongo-possibly due to differences in overall wrist configuration between apes and monkeys. If an extant ape-like wrist characterized early ancestors of African apes and hominins, then scaphoid-centrale fusion would have increased midcarpal rigidity in extension relative to the primitive condition. Although biomechanically consistent with a knuckle-walking hominin ancestor, this assumes that the trait evolved specifically for that biological role, which must be squared with contradictory interpretations of extant and fossil hominoid morphology. Regardless of its original adaptive significance, scaphoid-centrale fusion likely presented a constraint on early hominin midcarpal mobility.

Trabecular architecture in the thumb of Pan and Homo: implications for investigating hand use, loading, and hand preference in the fossil record

OBJECTIVES

Humans display an 85-95% cross-cultural right-hand bias in skilled tasks, which is considered a derived behavior because such a high frequency is not reported in wild non-human primates. Handedness is generally considered to be an evolutionary byproduct of selection for manual dexterity and augmented visuo-cognitive capabilities within the context of complex stone tool manufacture/use. Testing this hypothesis requires an understanding of when appreciable levels of right dominant behavior entered the fossil record. Because bone remodels in vivo, skeletal asymmetries are thought to reflect greater mechanical loading on the dominant side, but incomplete preservation of external morphology and ambiguities about past loading environments complicate interpretations. We test if internal trabecular bone is capable of providing additional information by analyzing the thumb of Homo sapiens and Pan.

MATERIALS AND METHODS

We assess trabecular structure at the distal head and proximal base of paired (left/right) first metacarpals using micro-CT scans of Homo sapiens (n = 14) and Pan (n = 9). Throughout each epiphysis we quantify average and local bone volume fraction (BV/TV), degree of anisotropy (DA), and elastic modulus (E) to address bone volume patterning and directional asymmetry.

RESULTS

We find a right directional asymmetry in H. sapiens consistent with population-level handedness, but also report a left directional asymmetry in Pan that may be the result of postural and/or locomotor loading.

CONCLUSION

We conclude that trabecular bone is capable of detecting right/left directional asymmetry, but suggest coupling studies of internal structure with analyses of other skeletal elements and cortical bone prior to applications in the fossil record.

Trabecular architecture of the manual elements reflects locomotor patterns in primates

The morphology of trabecular bone has proven sensitive to loading patterns in the long bones and metacarpal heads of primates. It is expected that we should also see differences in the manual digits of primates that practice different methods of locomotion. Primate proximal and middle phalanges are load-bearing elements that are held in different postures and experience different mechanical strains during suspension, quadrupedalism, and knuckle walking. Micro CT scans of the middle phalanx, proximal phalanx and the metacarpal head of the third ray were used to examine the pattern of trabecular orientation in Pan, Gorilla, Pongo, Hylobates and Macaca. Several zones, i.e., the proximal ends of both phalanges and the metacarpal heads, were capable of distinguishing between knuckle-walking, quadrupedal, and suspensory primates. Orientation and shape seem to be the primary distinguishing factors but differences in bone volume, isotropy index, and degree of anisotropy were seen across included taxa. Suspensory primates show primarily proximodistal alignment in all zones, and quadrupeds more palmar-dorsal orientation in several zones. Knuckle walkers are characterized by having proximodistal alignment in the proximal ends of the phalanges and a palmar-dorsal alignment in the distal ends and metacarpal heads. These structural differences may be used to infer locmotor propensities of extinct primate taxa.