Stepwise Functionalization of a Pillar[5]arene-Containing [2]Rotaxane with Pentafluorophenyl Ester Stoppers

Detailed investigations into the stepwise bis-functionalization of a pillar[5]arene-containing rotaxane building block have been carried out. Upon a first stopper exchange, the pillar[5]arene moiety of the mono-acylated product is preferentially located close to its reactive pentafluorophenyl ester stopper, thus limiting the accessibility to the reactive carbonyl group by the nucleophilic reagents. Selective mono-functionalization is thus very efficient. Introduction of a second stopper is then possible to generate dissymmetrical rotaxanes with different amide stoppers. Moreover, when dethreading is possible upon the second acylation, the pillar[5]arene plays the role of a protecting group allowing the synthesis of dissymmetrical axles that are particularly difficult to prepare under statistical conditions. Finally, detailed conformation analysis of the rotaxanes revealed that the position of the pillar[5]arene moiety on its axle subunit is mainly governed by polar interactions in nonpolar organic solvents, whereas solvophobic effects play a major role in polar solvents.

Polyyne [3]Rotaxanes: Synthesis via Dicobalt Carbonyl Complexes and Enhanced Stability

New strategies for synthesizing polyyne polyrotaxanes are being developed as an approach to stable carbyne “insulated molecular wires”. Here we report an active metal template route to polyyne [3]rotaxanes, using dicobalt carbonyl masked alkyne equivalents. We synthesized two [3]rotaxanes, both with the same C₂₈ polyyne dumbbell component, one with a phenanthroline‐based macrocycle and one using a 2,6‐pyridyl cycloparaphenylene nanohoop. The thermal stabilities of the two rotaxanes were compared with that of the naked polyyne dumbbell in decalin at 80 °C, and the nanohoop rotaxane was found to be 4.5 times more stable.

Molecular Encapsulation of Naphthalene Diimide (NDI) Based π-Conjugated Polymers: A Tool for Understanding Photoluminescence

Conjugated polymers are an important class of chromophores for optoelectronic devices. Understanding and controlling their excited state properties, in particular, radiative and non-radiative recombination processes are among the greatest challenges that must be overcome. We report the synthesis and characterization of a molecularly encapsulated naphthalene diimide-based polymer, one of the most successfully used motifs, and explore its structural and optical properties. The molecular encapsulation enables a detailed understanding of the effect of interpolymer interactions. We reveal that the non-encapsulated analogue P(NDI-2OD-T) undergoes aggregation enhanced emission; an effect that is suppressed upon encapsulation due to an increasing π-interchain stacking distance. This suggests that decreasing π-stacking distances may be an attractive method to enhance the radiative properties of conjugated polymers in contrast to the current paradigm where it is viewed as a source of optical quenching.

Post-Synthetic Macrocyclization of Rotaxane Building Blocks

Although not often encountered, cyclic interlocked molecules are appealing molecular targets because of their restrained tridimensional structure which is related to both the cyclic and interlocked shapes. Interlocked molecules such as rotaxane building blocks may be good candidates for post-synthetic intramolecular cyclization if the preservation of the mechanical bond ensures the interlocked architecture throughout the reaction. This is obviously the case if the modification does not involve the cleavage of either the macrocycle's main chain or the encircled part of the axle. However, among the post-synthetic reactions, the chemical linkage between two reactive sites belonging to embedded elements of rotaxanes still consists of an underexploited route to interlocked cyclic molecules. This Review lists the rare examples of macrocyclization through chemical connection between reactive sites belonging to a surrounding macrocycle and/or an encircled axle of interlocked rotaxanes.

Challenges and Opportunities in the Post-Synthetic Modification of Interlocked Molecules

Several strategies have been successfully utilised to obtain a wide range of interlocked molecules. However, some interlocked compounds are still not obtained directly and/or efficiently from non-interlocked components because the requisites for self-assembly cannot always be enforced. To circumvent such a synthetic problem, a strategy that consists of synthesizing an isolable and storable interlocked building block in a step that precedes its modification is an appealing chemical route to more sophisticated interlocked molecules. Synthetic opportunities and challenges are closely linked to the fact that the mechanical bond might greatly affect the reactivity of a functionality of the encircled axle, but that the interlocked architecture needs to be preserved during the synthesis. Hence, the mechanical bond plays a fundamental role in the strategy employed. This Review focuses on the challenging post-synthetic modifications of interlocked molecules, sometimes through cleavage of the axle's main chain, but always with conservation of the mechanical bond.

Interplay between a Foldamer Helix and a Macrocycle in a Foldarotaxane Architecture

The design and synthesis of a novel rotaxane/foldaxane hybrid architecture is reported. The winding of an aromatic oligoamide helix host around a dumbbell-shaped thread-like guest, or axle, already surrounded by a macrocycle was evidenced by NMR spectroscopy and X-ray crystallography. The process proved to depend on the position of the macrocycle along the axle and the associated steric hindrance. The macrocycle thus behaves as a switchable shield that modulates the affinity of the helix for the axle. Reciprocally, the foldamer helix acts as a supramolecular auxiliary that compartmentalizes the axle. In some cases, the macrocycle is forced to move along the axle to allow the foldamer to reach its best recognition site.

Masked Alkyne Equivalents for the Synthesis of Mechanically Interlocked Polyynes*

Polyyne polyrotaxanes, encapsulated cyclocarbon catenanes and other fascinating mechanically interlocked carbon-rich architectures should become accessible if masked alkyne equivalents (MAEs) can be developed that are large enough to prevent unthreading of a macrocycle, and that can be cleanly unmasked under mild conditions. Herein, we report the synthesis of a new bulky MAE based on t-butylbicyclo[4.3.1]decatriene. This MAE was used to synthesize a polyyne [2]rotaxane and a masked-polyyne [3]rotaxane by Cadiot-Chodkiewicz coupling. Glaser cyclo-oligomerization of the [2]rotaxane gave masked cyclocarbon catenanes. The unmasking behavior of the catenanes and rotaxanes was tested by photolysis at a range of UV wavelengths. Photochemical unmasking did not proceed cleanly enough to prepare extended encapsulated polyyne polyrotaxanes. We highlight the scope and challenges involved with this approach to interlocked carbon-rich architectures.

Cyclodextrin-Based [c2]Daisy Chain Rotaxane Insulating Two Diarylacetylene Cores

A [c2]daisy chain rotaxane with two diarylacetylene cores was efficiently synthesized in 53 % yield by capping a C₂ -symmetric pseudo[2]rotaxane composed of two diarylacetylene-substituted permethylated α-cyclodextrins (PM α-CDs) with aniline stoppers. The maximum absorption wavelength of the [c2]daisy chain rotaxane remained almost unchanged in various solvents, unlike that of the stoppered monomer, indicating that the two independent diarylacetylene cores were insulated from the external environment by the PM α-CDs. Furthermore, the [c2]daisy chain rotaxane exhibited fluorescence emission derived from both diarylacetylene monomers and the excimer, which implies that the [c2]daisy chain structure can undergo contraction and extension. This is the first demonstration of a system in which excimer formation between two π-conjugated molecules within an isolated space can be controlled by the unique motion of a [c2]daisy chain rotaxane.

A Water-Gated Organic Thin-Film Transistor for Glyphosate Detection: A Comparative Study with Fluorescence Sensing

This work reports the design of a highly sensitive solid-state sensor device based on a water-gated organic thin-film transistor (WG-OTFT) for the selective detection of herbicide glyphosate (GlyP) in water. A competitive assay among carboxylate-functionalized polythiophene, Cu2+ , and GlyP was employed as a sensing mechanism. Molecular recognition phenomena and electrical double layer (EDL) (at the polymer/water interface) originated from the field-effect worked cooperatively to amplify the sensitivity for GlyP. The limit of detection of WG-OTFT (0.26 ppm) was lower than that of a fluorescence sensor chip (0.95 ppm) which is the conventional sensing method. In contrast to the previously reported insulated molecular wires to block interchain interactions, molecular aggregates under the field-effect has shown to be effective for amplification of sensitivity through "intra"- and "inter"-molecular wire effects. The opposite strategy in this study could pave the way for fully utilizing the sensing properties of polymer-based solid-state sensor devices.

Macroscopic Change in Luminescent Color by Thermally Driven Sliding Motion in [3]Rotaxanes

Systematic investigation of rotaxane structures has revealed a rational design for thermally driven switching of their macroscopic properties. At low temperature, the luminophore is insulated by the macrocycles and displays monomer emission, whereas at high temperature, the luminophore is exposed owing to a change in the macrocyclic location distribution and interacts with external molecules, affording a thermally driven luminescent color change with high reversibility and responsiveness. This macroscopic switching through efficient thermal sliding was made possible by appropriate tuning of both the macrocycle-luminophore interactions within the rotaxane and the coupling between the excited luminophore and external molecules in an exciplex. The ability to switch properties by a simple and clean thermal stimuli should expand the utilization of rotaxanes as components of thermally driven molecular systems.

Syntheses, Structures, and Spectroscopic Properties of 1,10-Phenanthroline-Based Macrocycles Threaded by PtC8 Pt, PtC12 Pt, and PtC16 Pt Axles: Metal-Capped Rotaxanes as Insulated Molecular Wires

The platinum polyynyl complexes trans-(C₆ F₅ )(p-tol₃ P)₂ Pt(C≡C)_n/2 H undergo oxidative homocoupling (O₂ , CuCl/TMEDA) to diplatinum polyynediyl complexes trans, trans-(C₆ F₅ )(p-tol₃ P)₂ Pt(C≡C)_n Pt(Pp-tol₃ )₂ (C₆ F₅ ) (n=4, 2; 6, 5; 8, 8; 92-97 %) as reported previously. When related reactions are conducted in the presence of CuI adducts of the 1,10-phenanthroline-based macrocycles 2,9-(1,10-phenanthrolinediyl)(p-C₆ H₄ O(CH₂ )₆ O)₂ (1,3-C₆ H₄ ) (10, 33-membered) or 2,9-(1,10-phenanthrolinediyl)(p-C₆ H₄ O(CH₂ )₆ O)₂ (2,7-naphthalenediyl) (11, 35-membered), excess K₂ CO₃ , and I₂ (oxidant), rotaxanes are isolated that feature a Pt(C≡C)_n Pt axle that has been threaded through the macrocycle (2⋅10, 9 %; 5⋅10, 41 %; 5⋅11, 28 %; 8⋅10, 12 %; 8⋅11, 9 %). Their crystal structures are determined and analyzed in detail, particularly with respect to geometric perturbations and the degree of steric sp carbon chain insulation. NMR spectra show a number of shielding effects. UV/Vis spectra do not indicate significant electronic interactions between the Pt(C≡C)_n Pt axles and macrocycles, although cyclic voltammetry data suggest rapid reactions following oxidation.

A Tautoleptic Approach to Chiral Hydrogen-Bonded Supramolecular Tubular Polymers with Large Cavity

A new strategy towards tubular hydrogen-bonded polymers based on the self-assembly of isocytosine tautomers in orthogonal directions is proposed and experimentally verified, including by 1 H fast magic-angle spinning (MAS) solid-state NMR. The molecular tubes obtained possess large internal diameter and tailor-made outer functionalities rendering them potential candidates for a number of applications.

Ultra-Bright Rhodamines with Sulfobutylether-β-Cyclodextrin: A Viable Supramolecular Dye Laser in Aqueous Medium

Although aqueous dye lasers are much sought after, they have been of no practical use, as laser dyes show a strong tendency for aggregation in water, thus diminishing their optical output. Contributing towards this shortcoming, we studied the noncovalent interactions of two prominent laser dyes, namely, rhodamine 6G and rhodamine B, with a water soluble macrocyclic host, sulfobutylether-β-cyclodextrin (SBE₇ βCD). Spectral changes in the absorption and fluorescence behavior of dyes in presence of the SBE₇ βCD host indicated adequate complex formation between dye and host (K∼10⁴  M^-1 ). A combination of various photophysical parameters evaluated from measurements such as Job plot, changes in the fluorescence lifetime/anisotropy values, and favorable thermodynamic parameters from isothermal titration calorimetric measurements adjudicated a 1 : 1 stoichiometric complex formation between dye and SBE₇ βCD host. Consequently, SBE₇ βCD prevents dye aggregation/adsorption and present rhodamine dyes in their monomeric forms with enhanced fluorescence yield and brightness. These vital parameters were utilized to optimize and demonstrate cost-effective supramolecular broad-band and narrow-band aqueous dye laser systems with improved lasing efficiencies (∼25 % higher for the SBE₇ βCD : RhB system and ∼10 % higher for SBE₇ βCD : Rh6G system), better beam profile, and enhanced durability compared to the respective dyes in optically matched ethanol solutions.

"Helix-in-Helix" Superstructure Formation through Encapsulation of Fullerene-Bound Helical Peptides within a Helical Poly(methyl methacrylate) Cavity

A one-handed 310 -helical hexapeptide is efficiently encapsulated within the helical cavity of st-PMMA when a fullerene (C60 ) derivative is introduced at the C-terminal end of the peptide. The encapsulation is accompanied by induction of a preferred-handed helical conformation in the st-PMMA backbone with the same-handedness as that of the hexapeptide to form a crystalline st-PMMA/peptide-C60 inclusion complex with a unique optically active helix-in-helix structure. Although the st-PMMA is unable to encapsulate the 310 -helical peptide without the terminal C60 unit, the helical hollow space of the st-PMMA is almost filled by the C60 -bound peptides. This result suggests that the C60 moiety can serve as a versatile molecular carrier of specific molecules and polymers in the helical cavity of the st-PMMA for the formation of an inclusion complex, thus producing unique supramolecular soft materials that cannot be prepared by other methods.

Rational Design for Rotaxane Synthesis through Intramolecular Slippage: Control of Activation Energy by Rigid Axle Length

We describe a new concept for rotaxane synthesis through intramolecular slippage using π-conjugated molecules as rigid axles linked with organic soluble and flexible permethylated α-cyclodextrins (PM α-CDs) as macrocycles. Through hydrophilic-hydrophobic interactions and flipping of PM α-CDs, successful quantitative conversion into rotaxanes was achieved without covalent bond formation. The rotaxanes had high activation barrier for their de-threading, so that they were kinetically isolated and derivatized even under conditions unfavorable for maintaining the rotaxane structures. (1) H NMR spectroscopy experiments clearly revealed that the restricted motion of the linked macrocycle with the rigid axle made it possible to control the kinetic stability by adjusting the length of the rigid axle in the precursor structure rather than the steric bulkiness of the stopper unit.

Synthesis and Dynamics of Nanosized Phenylene-Ethynylene-Butadiynylene Rotaxanes and the Role of Shape Persistence

Phenylacetylene‐based [2]rotaxanes were synthesized by a covalent‐template approach by aminolysis of the corresponding prerotaxanes. The wheel and the bulky stoppers are made of phenylene–ethynylene–butadiynylene macrocycles of the same size. The stoppers are large enough to enable the synthesis and purification of the rotaxane. However, the wheel unthreads from the axle at elevated temperatures. The deslipping kinetics and the activation parameters were determined. We described theoretically the unthreading by state‐of‐the‐art DFT‐based molecular‐mechanics models and a string method for the simulation of rare events. This approach enabled us to characterize in detail the unthreading mechanism, which involves the folding of the stopper during its passage through the wheel opening, a process that defies intuitive geometrical considerations. The conformational and energetic features of the transition allowed us to infer the molecular residues controlling the disassembly timescale.

A Cyclodextrin-Based Photoresponsive Molecular Gate that Functions Independently of Either Solvent or Potentially Competitive Guests

The photoinduced interconversion between cinnamido-substituted cyclodextrins constitutes a gating switch through which the substituent moves to open or block access to the cyclodextrin cavity. Most unusually for a cyclodextrin-based device, the operation of this gate is solvent-independent and unaffected by potentially competitive guests. It occurs in MeOH and DMSO, as well as in water. This contrasts with other cyclodextrin inclusion phenomena that are usually driven by hydrophobic effects and limited to aqueous media.