Three-Dimensional Nanostructured Substrates toward Efficient Capture of Circulating Tumor Cells

Refining of Particulates at Stimuli-Responsive Interfaces: Label-Free Sorting and Isolation

The mechanism of separation methods, for example, liquid chromatography, is realized through rapid multiple adsorption-desorption steps leading to the dynamic equilibrium state in a mixture of molecules with different partition coefficients. Sorting of colloidal particles, including protein complexes, cells, and viruses, is limited due to a high energy barrier, up to millions kT, required to detach particles from the interface, which is in dramatic contrast to a few kT for small molecules. Such a strong interaction renders particle adsorption quasi-irreversible. The dynamic adsorption-desorption equilibrium is approached very slowly, if ever attainable. This limitation is alleviated with a local oscillating repulsive mechanical force generated at the microstructured stimuli-responsive polymer interface to switch between adsorption and mechanical-force-facilitated desorption of the particles. Such a dynamic regime enables the separation of colloidal mixtures based on the particle-polymer interface affinity, and it could find use in research, diagnostics, and industrial-scale label-free sorting of highly asymmetric mixtures of colloids and cells.

Efficient Capture and Raman Analysis of Circulating Tumor Cells by Nano-Undulated AgNPs-rGO Composite SERS Substrates

The analysis of circulating tumor cells (CTCs) in the peripheral blood of cancer patients is critical in clinical research for further investigation of tumor progression and metastasis. In this study, we present a novel surface-enhanced Raman scattering (SERS) substrate for the efficient capture and characterization of cancer cells using silver nanoparticles-reduced graphene oxide (AgNPs-rGO) composites. A pulsed laser reduction of silver nanowire-graphene oxide (AgNW-GO) mixture films induces hot-spot formations among AgNPs and artificial biointerfaces consisting of rGOs. We also use in situ electric field-assisted fabrication methods to enhance the roughness of the SERS substrate. The AgNW-GO mixture films, well suited for the proposed process due to its inherent electrophoretic motion, is adjusted between indium tin oxide (ITO) transparent electrodes and the nano-undulated surface is generated by applying direct-current (DC) electric fields during the laser process. As a result, MCF7 breast cancer cells are efficiently captured on the AgNPs-rGO substrates, about four times higher than the AgNWs-GO films, and the captured living cells are successfully analyzed by SERS spectroscopy. Our newly designed bifunctional substrate can be applied as an effective system for the capture and characterization of CTCs.

Pivotal role of electrospun nanofibers in microfluidic diagnostic systems - a review

Recently, the usage of electrospinning technology for the fabrication of fine fibers with a good deal of variation in morphology and structure has drawn the attention of many researchers around the world. These fibers have found their way in the many fields of science including medical diagnosis, tissue engineering, drug delivery, replica molding, solar cells, catalysts, energy conversion and storage, physical and chemical sensors and other applications. Among all applications, biosensing with the aim of rapid and sensitive biomarker detection is an area that warrants attention. Electrospun nanofibrous membranes enjoy numerous factors which benefit them to be used as potential candidates in biosensing platforms. Some of these factors include a high surface to volume ratio, analogous scale compared to bioactive molecules and relatively defect-free properties of nanofibers (NFs). In this review, we focused on the recent advances in electrospun nanofibrous membrane-based micro-analytical devices with an application as diagnostic systems. Hence, a study on the electrospun nanofiber usage in lab-on-a-chip and paper-based point-of-care devices, with an opening introduction to biosensors, nanofibers, the electrospinning method, and microfluidics as the principles of the intended subject, is provided. It is anticipated that the given examples in this paper will provide sufficient evidence for the potential of electrospun NFs for being used as a substrate in the commercial fabrication of highly sensitive and selective biosensors.

Incorporation of lateral microfiltration with immunoaffinity for enhancing the capture efficiency of rare cells

The methods for isolating rare cells such as circulating tumor cells (CTCs) can be generally classified into two categories: those based on physical properties (e.g., size) and methods based on biological properties (e.g., immunoaffinity). CellSearch, the only FDA-approved method for the CTC-based cancer prognosis, relies on immunoaffinity interactions between CTCs and antibodies immobilized on magnetic particles. Immunoaffinity-based CTC isolation has also been employed in microfluidic devices, which show higher capture efficiency than CellSearch. We report here our investigation of combining size-based microfiltration into a microfluidic device with immunoaffinity for enhanced capture efficiency of CTCs. The device consists of four serpentine main channels, and each channel contains an array of lateral filters that create a two-dimensional flow. The main flow is through the serpentine channel, allowing the majority of the sample to pass by while the secondary flow goes through the lateral filters. The device design is optimized to make all fluid particles interact with filters. The filter sizes range from 24 to 12 µm, being slightly larger than or having similar dimension of CTCs. These filters are immobilized with antibodies specific to CTCs and thus they function as gates, allowing normal blood cells to pass by while forcing the interactions between CTCs and antibodies on the filter surfaces. The hydrodynamic force experienced by a CTC was also studied for optimal experimental conditions to ensure immunoaffinity-enabled cell capture. The device was evaluated by capturing two types of tumor cells spiked in healthy blood or a buffer, and we found that their capture efficiency was between 87.2 and 93.5%. The platform was further validated by isolating CTCs from blood samples of patients with metastatic pancreatic cancer.

Nucleic Acid Aptamers for Molecular Diagnostics and Therapeutics: Advances and Perspectives

The advent of SELEX (systematic evolution of ligands by exponential enrichment) technology has shown the ability to evolve artificial ligands with affinity and specificity able to meet growing clinical demand for probes that can, for example, distinguish between the target leukemia cells and other cancer cells within the matrix of heterogeneity, which characterizes cancer cells. Though antibodies are the conventional and ideal choice as a molecular recognition tool for many applications, aptamers complement the use of antibodies due to many unique advantages, such as small size, low cost, and facile chemical modification. This Minireview will focus on the novel applications of aptamers and SELEX, as well as opportunities to develop molecular tools able to meet future clinical needs in biomedicine.

Bioinspired Superwettable Microspine Chips with Directional Droplet Transportation for Biosensing

Directional droplet transportation without extra energy input remains a challenge in microfluidic biochips for clinical detections. Herein, inspired by the water-collecting behaviors on the cactus spine, we fabricate nanomaterial-based superwettable microspine (SMS) chips. The bioinspired SMS chips are capable of spontaneous and directional droplet transportation by synergistically combining geometric asymmetry and surface superhydrophilicity. Based on theoretical models, the gradient of the Laplace pressure arising from the geometric asymmetry of the SMS chip can dominate the directional transportation of the droplet, and the superhydrophilicity of the nanomaterial-based microspine can also contribute to the droplet self-transportation. The multimicrochannel SMS chips provide a simple and energy efficient technology to realize accurate detection of serum prostate-specific antigen (PSA) from prostate cancer patients, showing great potential as a biosensing platform for clinical applications. We believe that our bioinspired superwettable two-dimensional conical surface will offer effective means for the design of smart microfluidic devices and have great potential applications in multicomponent biosensing and clinical detection.

An electrochemical signal-on apta-cyto-sensor for quantitation of circulating human MDA-MB-231 breast cancer cells by transduction of electro-deposited non-spherical nanoparticles of gold

A highly simple, sensitive, specific and low-cost electrochemical apta-cyto-sensor for determination of circulating human MDA-MB-231 breast cancer cells was fabricated. Non-spherical nanoparticles of gold were electro-deposited in the presence of ethosuximide as a shape directing and size controlling agent. The nanoparticles had dimensions ranging 50-150 nm, and covered the underlying surface with a roughness factor of 8.03. The Non-spherical nanoparticles were then employed as the apta-cyto-sensor transducer. A 83-mer DNA aptamer that is specific to capturing the cell surface proteins was immobilized on the transducer surface, and binding with the cells was followed using the ferro/ferricyanide redox marker. The aptamer was immobilized within ∼200 min on the transducer surface. The cells were quantified with an equation of regression of ΔIp(μA) = (1.028 ± 0.027) log (C (cell mL^-1)) + (0.2199 ± 0.0944), a sensitivity of 1.028 μA (log (concentration / cell mL^-1))^-1 and a quantitation limit of 2 cell mL^-1, in a concentration range of 5 to 2 × 10⁶ cell mL^-1. The apta-cyto-sensor selectivity was also evaluated toward AsPC-1, Calu-6, HeLa, MCF-7 and melanoma B16/F10 cell lines. The apta-cyto-sensor had a fabrication reproducibility of 4.2%, regeneration capability of 5.1%, a stability of 35 days, and a potential application for the detection of MDA-MB-231 cells in the spiked blood serum samples with a sensitivity of 0.8975 μA (log (concentration / cell mL^-1))^-1 and a quantitation limit of 5 cell mL^-1, in a concentration range of 10 to 1 × 10³ cell mL^-1. The apta-cyto-sensor would be applicable for breast cancer diagnosis at early stage.

Defect-Rich Adhesive Nanozymes as Efficient Antibiotics for Enhanced Bacterial Inhibition

Nanozymes have emerged as a new generation of antibiotics with exciting broad-spectrum antimicrobial properties and negligible biotoxicities. However, their antibacterial efficacies are unsatisfactory due to their inability to trap bacteria and their low catalytic activity. Herein, we report nanozymes with rough surfaces and defect-rich active edges. The rough surface increases bacterial adhesion and the defect-rich edges exhibit higher intrinsic peroxidase-like activity compared to pristine nanozymes due to their lower adsorption energies of H₂ O₂ and desorption energy of OH*, as well as the larger exothermic process for the whole reaction. This was demonstrated using drug-resistant Gram-negative Escherichia coli and Gram-positive Staphylococcus aureus in vitro and in vivo. This strategy can be used to engineer nanozymes with enhanced antibacterial function and will pave a new way for the development of alternative antibiotics.

Identification of Critical Surface Parameters Driving Lectin-Mediated Capture of Bacteria from Solution

Lectin-functional interfaces are useful for isolation of bacteria from solution because they are low-cost and allow nondestructive, reversible capture. This study provides a systematic investigation of physical and chemical surface parameters that influence bacteria capture over lectin-functionalized polymer interfaces and then applies these findings to construct surfaces with significantly enhanced bacteria capture. The designer block copolymer poly(glycidyl methacrylate)- block-poly(vinyldimethyl azlactone) was used as a lectin attachment layer, and lectin coupling into the polymer film through azlactone-lectin coupling reactions was first characterized. Here, experimental parameters including polymer areal chain density, lectin molecular weight, and lectin coupling buffer were systematically varied to identify parameters driving highest azlactone conversions and corresponding lectin surface densities. To introduce physical nanostructures into the attachment layer, nanopillar arrays (NPAs) of varied heights (300 and 2100 nm) were then used to provide an underlying surface template for the functional polymer layer. Capture of Escherichia coli on lectin-polymer surfaces coated over both flat and NPA surfaces was then investigated. For flat polymer interfaces, bacteria were detected on the surface after incubation at a solution concentration of 10³ cfu/mL, and a corresponding detection limit of 1.7 × 10³ cfu/mL was quantified. This detection limit was 1 order of magnitude lower than control lectin surfaces functionalized with standard, carbodiimide coupling chemistry. NPA surfaces containing 300 nm tall pillars further improved the detection limit to 2.1 × 10² cfu/mL, but also reduced the viability of captured cells. Finally, to investigate the impact of cell surface parameters on capture, we used Agrobacterium tumefaciens cells genetically modified to allow manipulation of exopolysaccharide adhesin production levels. Statistical analysis of surface capture levels revealed that lectin surface density was the primary factor driving capture, as opposed to exopolysaccharide adhesin expression. These findings emphasize the critical importance of the synthetic interface and the development of surfaces that combine high lectin densities with tailored physical features to drive high levels of capture. These insights will aid in design of biofunctional interfaces with physicochemical surface properties favorable for capture and isolation of bacteria cells from solutions.

Recent advances in microfluidic methods in cancer liquid biopsy

Early cancer detection, its monitoring, and therapeutical prediction are highly valuable, though extremely challenging targets in oncology. Significant progress has been made recently, resulting in a group of devices and techniques that are now capable of successfully detecting, interpreting, and monitoring cancer biomarkers in body fluids. Precise information about malignancies can be obtained from liquid biopsies by isolating and analyzing circulating tumor cells (CTCs) or nucleic acids, tumor-derived vesicles or proteins, and metabolites. The current work provides a general overview of the latest on-chip technological developments for cancer liquid biopsy. Current challenges for their translation and their application in various clinical settings are discussed. Microfluidic solutions for each set of biomarkers are compared, and a global overview of the major trends and ongoing research challenges is given. A detailed analysis of the microfluidic isolation of CTCs with recent efforts that aimed at increasing purity and capture efficiency is provided as well. Although CTCs have been the focus of a vast microfluidic research effort as the key element for obtaining relevant information, important clinical insights can also be achieved from alternative biomarkers, such as classical protein biomarkers, exosomes, or circulating-free nucleic acids. Finally, while most work has been devoted to the analysis of blood-based biomarkers, we highlight the less explored potential of urine as an ideal source of molecular cancer biomarkers for point-of-care lab-on-chip devices.

Preparation of Au@Ag core-shell nanoparticle decorated silicon nanowires for bacterial capture and sensing combined with laser induced breakdown spectroscopy and surface-enhanced Raman spectroscopy

Three-dimensional nano-biointerfaces, emerging as significant cell-guiding platforms, have attracted great attention. Nevertheless, complicated chemical modifications and instability of bio-ligands limit their widespread application. In this study, a novel biointerface, based on silicon nanowires (SiNWs) array, was prepared for bacterial capture and sensing. Vertically aligned SiNWs were fabricated via metal assisted chemical etching and decorated with uniform Au@Ag core-shell nanoparticles (Au@Ag NPs). These deposited Au@Ag NPs formed multi-scale topographic structures with nanowires, which provided effective attachment sites for bacterial adhesins. In addition, the Au cores of Au@Ag NPs enhanced the activity of the surface silver atoms and promoted the binding of Au@Ag NPs to bacteria. Thus, the Au@Ag NPs decorated SiNWs (SiNWs-Au@Ag) substrate exhibited high capture capacity for bacteria in drinking water (8.6 and 5.5 × 106 cells per cm2 for E. coli and S. aureus in 40 min, respectively) via physical and chemical effects. Bacteria in drinking water can be sensitively detected by using a combination of laser induced breakdown spectroscopy (LIBS) and label based surface-enhanced Raman spectroscopy (SERS) techniques. Due to the antibacterial activity of Au@Ag NPs and the physical stress exerted on SiNWs, the prepared biointerface also showed high antibacterial rates towards both Gram-positive and Gram-negative bacteria strains. With these excellent properties, the flexible sensing platform might open a new avenue for the prevention and control of microbial hazards in water.

Efficient Capture and High Activity Release of Circulating Tumor Cells by Using TiO2 Nanorod Arrays Coated with Soluble MnO2 Nanoparticles

Effective capture and release of circulating tumor cells (CTCs) with high viability is still a challenge in medical research. We design a novel approach with efficient yield and high cell activity for the capture and release of CTCs. Our platform is based on TiO₂ nanorod arrays coated with transparent MnO₂ nanoparticles. We use hydrothermal synthesis to prepare TiO₂ nanorod arrays, the MnO₂ nanoparticles are fabricated through in situ self-assembly on the substrate to form a monolayer and etched by oxalic acid with low concentration at room temperature. Up to 92.9% of target cells are isolated from the samples using our capture system and the captured cells can be released from the platform, the saturated release efficiency is 89.9%. Employing lower than 2 × 10^-3 M concentration of oxalic acid to dissolve MnO₂, the viability of MCF-7 cancer cells exceed 90%. Such a combination of the two-dimensional and three-dimensional platforms provides a new approach isolate CTCs from patient blood samples.

Mechano-Based Transductive Sensing for Wearable Healthcare

Wearable healthcare presents exciting opportunities for continuous, real-time, and noninvasive monitoring of health status. Even though electrochemical and optical sensing have already made great advances, there is still an urgent demand for alternative signal transformation in terms of miniaturization, wearability, conformability, and stretchability. Mechano-based transductive sensing, referred to the efficient transformation of biosignals into measureable mechanical signals, is claimed to exhibit the aforementioned desirable properties, and ultrasensitivity. In this Concept, a focus on pressure, strain, deflection, and swelling transductive principles based on micro-/nanostructures for wearable healthcare is presented. Special attention is paid to biophysical sensors based on pressure/strain, and biochemical sensors based on microfluidic pressure, microcantilever, and photonic crystals. There are still many challenges to be confronted in terms of sample collection, miniaturization, and wireless data readout. With continuing efforts toward solving those problems, it is anticipated that mechano-based transduction will provide an accessible route for multimode wearable healthcare systems integrated with physical, electrophysiological, and biochemical sensors.

Electrical Impedance Measurements of Biological Cells in Response to External Stimuli

Dielectric spectroscopy (DS) is a noninvasive technique for real-time measurements of the impedance spectra of biological cells. DS enables characterization of cellular dielectric properties such as membrane capacitance and cytoplasmic conductivity. We have developed a lab-on-a-chip device that uses an electro-activated microwells array for capturing, DS measurements, and unloading of biological cells. Impedance measurements were conducted at 0.2 V in the 10 kHz to 40 MHz range with 6 s time resolution. An equivalent circuit model was developed to extract the cell membrane capacitance and cell cytoplasmic conductivity from the impedance spectra. A human prostate cancer cell line, PC-3, was used to evaluate the device performance. Suspension of PC-3 cells in low conductivity buffers (LCB) enhanced their dielectrophoretic trapping and impedance response. We report the time course of the variations in dielectric properties of PC-3 cells suspended in LCB and their response to sudden pH change from a pH of 7.3 to a pH of 5.8. Importantly, we demonstrated that our device enabled real-time measurements of dielectric properties of live cancer cells and allowed the assessment of the cellular response to variations in buffer conductivity and pH. These data support further development of this device toward single cell measurements.

Integration of biomimicry and nanotechnology for significantly improved detection of circulating tumor cells (CTCs)

Circulating tumor cells (CTCs) have received a great deal of scientific and clinical attention as a biomarker for diagnosis and prognosis of many types of cancer. Given their potential significance in clinics, a variety of detection methods, utilizing the recent advances in nanotechnology and microfluidics, have been introduced in an effort of achieving clinically significant detection of CTCs. However, effective detection and isolation of CTCs still remain a tremendous challenge due to their extreme rarity and phenotypic heterogeneity. Among many approaches that are currently under development, this review paper focuses on a unique, promising approach that takes advantages of naturally occurring processes achievable through application of nanotechnology to realize significant improvement in sensitivity and specificity of CTC capture. We provide an overview of successful outcome of this biomimetic CTC capture system in detection of tumor cells from in vitro, in vivo, and clinical pilot studies. We also emphasize the clinical impact of CTCs as biomarkers in cancer diagnosis and predictive prognosis, which provides a cost-effective, minimally invasive method that potentially replaces or supplements existing methods such as imaging technologies and solid tissue biopsy. In addition, their potential prognostic values as treatment guidelines and that ultimately help to realize personalized therapy are discussed.

Tumor cell capture patterns around aptamer-immobilized microposts in microfluidic devices

Circulating tumor cells (CTCs) have shown potential for cancer diagnosis and prognosis. Affinity-based CTC isolation methods have been proved to be efficient for CTC detection in clinical blood samples. One of the popular choices for affinity-based CTC isolation is to immobilize capture agents onto an array of microposts in microchannels, providing high CTC capture efficiency due to enhanced interactions between tumor cells and capture agents on the microposts. However, how the cells interact with microposts under different flow conditions and what kind of capture pattern results from the interactions have not been fully investigated; a full understanding of these interactions will help to design devices and choose experimental conditions for higher CTC capture effeciency. We report our study on their interaction and cell distribution patterns around microposts under different flow conditions. Human acute lymphoblastic leukemia cells (CCRF-CEM) were used as target cancer cells in this study, while the Sgc8 aptamer that has specific binding with CCRF-CEM cells was employed as a capture agent. We investigated the effects of flow rates and micropost shapes on the cell capture efficiency and capture patterns on microposts. While a higher flow rate decreased cell capture efficiency, we found that the capture pattern around microposts also changed, with much more cells captured in the front half of a micropost than at the back half. We also found the ratio of cells captured on microposts to the cells captured by both microposts and channel walls increased as a function of the flow rate. We compared circular microposts with an elliptical shape and found that the geometry affected the capture distribution around microposts. In addition, we have developed a theoretical model to simulate the interactions between tumor cells and micropost surfaces, and the simulation results are in agreement with our experimental observation.

Enrichment and single-cell analysis of circulating tumor cells

Up to 90% of cancer-related deaths are caused by metastatic cancer. Circulating tumor cells (CTCs), a type of cancer cell that spreads through the blood after detaching from a solid tumor, are essential for the establishment of distant metastasis for a given cancer. As a new type of liquid biopsy, analysis of CTCs offers the possibility to avoid invasive tissue biopsy procedures with practical implications for diagnostics. The fundamental challenges of analyzing and profiling CTCs are the extremely low abundances of CTCs in the blood and the intrinsic heterogeneity of CTCs. Various technologies have been proposed for the enrichment and single-cell analysis of CTCs. This review aims to provide in-depth insights into CTC analysis, including various techniques for isolation of CTCs with capture methods based on physical and biochemical principles, and single-cell analysis of CTCs at the genomic, proteomic and phenotypic level, as well as current developmental trends and promising research directions.

Large-area assembly of halloysite nanotubes for enhancing the capture of tumor cells

Here, polystyrene sulfonate sodium (PSS) modified Halloysite nanotubes (HNTs) were self-assembled into a patterned coating on a glass substrate with ordered nanotube arrays in a slit-like confined space. The microstructure of the formed patterned HNTs coating was investigated. The formed strips are more regular and almost parallel to each other with an increase in HNTs concentration. The HNTs coating formed from the 2% PSS-HNTs dispersion has the maximum nanotube alignment degree. The patterned HNTs coating was employed to capture tumor cells. The tumor cells can be captured by the HNTs coating effectively compared with a smooth glass surface due to the enhanced topographic interactions between the HNTs coating and cancer cells. The HNTs coating prepared from the 2% PSS-HNTs dispersion has the highest capture yield which is due to the ordered nanotube arrangement and the appropriate surface roughness. The HNTs coating was further conjugated with anti-EpCAM, which leads to the capture yield of MCF-7 cells reaching 92% within 3 h. The HNTs coating can capture 8 MCF-7 cells from 1 mL artificial blood samples spiked with 10 MCF-7 cells, showing the promising applications of HNTs in clinical circulating tumor cell capture for early diagnosis and monitoring of cancer patients.

Label-Free Virus Capture and Release by a Microfluidic Device Integrated with Porous Silicon Nanowire Forest

Viral diseases are perpetual threats to human and animal health. Detection and characterization of viral pathogens require accurate, sensitive, and rapid diagnostic assays. For field and clinical samples, the sample preparation procedures limit the ultimate performance and utility of the overall virus diagnostic protocols. This study presents the development of a microfluidic device embedded with porous silicon nanowire (pSiNW) forest for label-free size-based point-of-care virus capture in a continuous curved flow design. The pSiNW forests with specific interwire spacing are synthesized in situ on both bottom and sidewalls of the microchannels in a batch process. With the enhancement effect of Dean flow, this study demonstrates that about 50% H5N2 avian influenza viruses are physically trapped without device clogging. A unique feature of the device is that captured viruses can be released by inducing self-degradation of the pSiNWs in physiological aqueous environment. About 60% of captured viruses can be released within 24 h for virus culture, subsequent molecular diagnosis, and other virus characterization and analyses. This device performs viable, unbiased, and label-free virus isolation and release. It has great potentials for virus discovery, virus isolation and culture, functional studies of virus pathogenicity, transmission, drug screening, and vaccine development.

Functional Graphene Nanomaterials Based Architectures: Biointeractions, Fabrications, and Emerging Biological Applications

Functional graphene nanomaterials (FGNs) are fast emerging materials with extremely unique physical and chemical properties and physiological ability to interfere and/or interact with bioorganisms; as a result, FGNs present manifold possibilities for diverse biological applications. Beyond their use in drug/gene delivery, phototherapy, and bioimaging, recent studies have revealed that FGNs can significantly promote interfacial biointeractions, in particular, with proteins, mammalian cells/stem cells, and microbials. FGNs can adsorb and concentrate nutrition factors including proteins from physiological media. This accelerates the formation of extracellular matrix, which eventually promotes cell colonization by providing a more beneficial microenvironment for cell adhesion and growth. Furthermore, FGNs can also interact with cocultured cells by physical or chemical stimulation, which significantly mediate their cellular signaling and biological performance. In this review, we elucidate FGNs-bioorganism interactions and summarize recent advancements on designing FGN-based two-dimensional and three-dimensional architectures as multifunctional biological platforms. We have also discussed the representative biological applications regarding these FGN-based bioactive architectures. Furthermore, the future perspectives and emerging challenges will also be highlighted. Due to the lack of comprehensive reviews in this emerging field, this review may catch great interest and inspire many new opportunities across a broad range of disciplines.

Antibody-modified hydroxyapatite surfaces for the efficient capture of bladder cancer cells in a patient's urine without recourse to any sample pre-treatment

In this study, we describe a sensitive protocol for the detection of bladder cancer cells in a patient's urine without pre-treatment of the urine sample using antibody-modified hydroxyapatite (HAp) micro/nanostructured surfaces converted from natural seashells under mild biomineralization conditions.

A novel H2O2 biosensor based on three-dimensional micro/nano-biointerfaces

A novel H₂O₂ biosensor was first reported to directly grow living cells on three-dimensional micro/nano-biointerfaces to promote electrochemical performance.

Ultra-Specific Isolation of Circulating Tumor Cells Enables Rare-Cell RNA Profiling

The clinical potential of circulating tumor cells (CTCs) in managing cancer metastasis is significant. However, low CTC isolation purities from patient blood have hindered sensitive molecular assays of these rare cells. Described herein is the ultra-pure isolation of CTCs from patient blood samples and how this platform has enabled highly specific molecular (mRNA and miRNA) profiling of patient CTCs.

Smart Thin Hydrogel Coatings Harnessing Hydrophobicity and Topography to Capture and Release Cancer Cells

Smart thin hydrogel coatings are fabricated to capture and release targeted cancer cells by simultaneously tuning surface hydrophobicity and topography. At physiological temperature, the targeted cancer cells are captured on the hydrophobic and wrinkled coating surface. At room temperature, the captured cells are released from the hydrophilic and smooth coating surface.

Photoswitched Cell Adhesion on Azobenzene-Containing Self-Assembled Films

Stimuli-responsive surfaces that can regulate and control cell adhesion have attracted much attention for their great potential in diverse biomedical applications. Unlike for pH- and temperature-responsive surfaces, the process of photoswitching requires no additional input of chemicals or thermal energy. In this work, two different photoresponsive azobenzene films are synthesized by chemisorption and electrostatic layer-by-layer (LbL) assembly techniques. The LbL film exhibits a relatively loose packing of azobenzene chromophores compared with the chemisorbed film. The changes in trans/cis isomer ratio of the azobenzene moiety and the corresponding wettability of the LbL films are larger than those of the chemisorbed films under UV light irradiation. The tendency for cell adhesion on the LbL films decreases markedly after UV light irradiation, whereas adhesion on the chemisorbed films decreases only slightly, because the azobenzene chromophores stay densely packed. Interestingly, the tendency for cell adhesion can be considerably increased on rough substrates, the roughness being introduced by use of photolithography and inductively coupled plasma deep etching techniques. For the chemisorbed films on rough substrates, the amount of cells that adhere also changes slightly after UV light irradiation, whereas, the amount of cells that adhere to LbL films on rough substrates decreases significantly.

Organ-on-a-Chip Systems: Microengineering to Biomimic Living Systems

"Organ-on-a-chip" systems integrate microengineering, microfluidic technologies, and biomimetic principles to create key aspects of living organs faithfully, including critical microarchitecture, spatiotemporal cell-cell interactions, and extracellular microenvironments. This creative platform and its multiorgan integration recapitulating organ-level structures and functions can bring unprecedented benefits to a diversity of applications, such as developing human in vitro models for healthy or diseased organs, enabling the investigation of fundamental mechanisms in disease etiology and organogenesis, benefiting drug development in toxicity screening and target discovery, and potentially serving as replacements for animal testing. Recent advances in novel designs and examples for developing organ-on-a-chip platforms are reviewed. The potential for using this emerging technology in understanding human physiology including mechanical, chemical, and electrical signals with precise spatiotemporal controls are discussed. The current challenges and future directions that need to be pursued for these proof-of-concept studies are also be highlighted.

Electrospun nanofibers for cancer diagnosis and therapy

The advent of nanotechnology has provided unprecedented opportunities for nanomedicine. Electrospun nanofibers have some astounding features such as high loading capacity, extremely large surface area and porosity, high encapsulation efficiency, ease of modification, combination of diverse therapies, low cost and great benefits. These remarkable structure-dependent properties have far reaching application potential in cancer diagnosis and therapy such as ultra-sensitive sensing systems for point-of-care cancer detection, targeted cancer cell capture, and functional and smart anticancer drug delivery systems. This review summarizes the principal mechanism of electrospun nanofibers and a variety of modified electrospun nanofibers, illustrates their application in biosensors for cancer detection, and enumerates their application in implantable drug delivery for cancer therapy.

Beyond the Capture of Circulating Tumor Cells: Next-Generation Devices and Materials

Over the last decade, significant progress has been made towards the development of approaches that enable the capture of rare circulating tumor cells (CTCs) from the blood of cancer patients, a critical capability for noninvasive tumor profiling. These advances have leveraged new insights in materials chemistry and microfluidics and allowed the capture and enumeration of CTCs with unprecedented sensitivity. However, it has become increasingly clear that simply capturing and counting tumor cells launched into the bloodstream may not provide the information needed to advance our understanding of the biology of these rare cells, or to allow us to better exploit them in medicine. A variety of advances have now emerged demonstrating that more information can be extracted from CTCs with next-generation devices and materials featuring tailored physical and chemical properties. In this Minireview, the last ten years of work in this area will be discussed, with an emphasis on the groundbreaking work of the last five years, during which the focus has moved beyond the simple capture of CTCs and gravitated towards approaches that enable in-depth analysis.

Screening and Molecular Analysis of Single Circulating Tumor Cells Using Micromagnet Array

Immunomagnetic assay has been developed to detect rare circulating tumor cells (CTCs), which shows clinical significance in cancer diagnosis and prognosis. The generation and fine-tuning of the magnetic field play essential roles in such assay toward effective single-cell-based analyses of target cells. However, the current assay has a limited range of field gradient, potentially leading to aggregation of cells and nanoparticles. Consequently, quenching of the fluorescence signal and mechanical damage to the cells may occur, which lower the system sensitivity and specificity. We develop a micromagnet-integrated microfluidic system for enhanced CTC detection. The ferromagnetic micromagnets, after being magnetized, generate localized magnetic field up to 8-fold stronger than that without the micromagnets, and strengthen the interactions between CTCs and the magnetic field. The system is demonstrated with four cancer cell lines with over 97% capture rate, as well as with clinical samples from breast, prostate, lung, and colorectal cancer patients. The system captures target CTCs from patient blood samples on a standard glass slide that can be examined using the fluorescence in-situ hybridization method for the single-cell profiling. All cells showed clear hybridization signals, indicating the efficacy of the compact system in providing retrievable cells for molecular studies.

Alternating current electrohydrodynamics in microsystems: Pushing biomolecules and cells around on surfaces

Electrohydrodynamics (EHD) deals with the fluid motion induced by an electric field. This phenomenon originally developed in physical science, and engineering is currently experiencing a renaissance in microfluidics. Investigations by Taylor on Gilbert's theory proposed in 1600 have evolved to include multiple contributions including the promising effects arising from electric field interactions with cells and particles to influence their behaviour on electrode surfaces. Theoretical modelling of electric fields in microsystems and the ability to determine shear forces have certainly reached an advanced state. The ability to deftly manipulate microscopic fluid flow in bulk fluid and at solid/liquid interfaces has enabled the controlled assembly, coagulation, or removal of microstructures, nanostructures, cells, and molecules on surfaces. Furthermore, the ability of electrohydrodynamics to generate fluid flow using surface shear forces generated within nanometers from the surface and their application in bioassays has led to recent advancements in biomolecule, vesicle and cellular detection across different length scales. With the integration of Alternating Current Electrohydrodynamics (AC-EHD) in cellular and molecular assays proving to be highly fruitful, challenges still remain with respect to understanding the discrepancies between each of the associated ac-induced fluid flow phenomena, extending their utility towards clinical diagnostic development, and utilising them in tandem as a standard tool for disease monitoring. In this regard, this article will review the history of electrohydrodynamics, followed by some of the recent developments in the field including a new dimension of electrohydrodynamics that deals with the utilization of surface shear forces for the manipulation of biological cells or molecules on electrode surfaces. Recent advances and challenges in the use of electrohydrodynamic forces such as dielectrophoresis and ac electrosmosis for the detection of biological analytes are also reviewed. Additionally, the fundamental mechanisms of fluid flow using electrohydrodynamics forces, which are still evolving, are reviewed. Challenges and future directions are discussed from the perspective of both fundamental understanding and potential applications of these nanoscaled shear forces in diagnostics.

Smart surfaces based on thermo-responsive polymer brushes prepared from L-alanine derivatives for cell capture and release

Two novel thermo-responsive polymer brushes were prepared from L-alanine derivatives using the surface-initiated atom transfer radical polymerization (SI-ATRP) technique. The temperature-induced cell capture and release on both polymer brush modified substrates were further explored.

Exploring cancer metastasis prevention strategy: interrupting adhesion of cancer cells to vascular endothelia of potential metastatic tissues by antibody-coated nanomaterial

Background

Cancer metastasis caused by circulating tumor cells (CTCs) accounts for 90% cancer-related death worldwide. Blocking the circulation of CTCs in bloodstream and their hetero-adhesion to vascular endothelia of the distant metastatic organs may prevent cancer metastasis. Nanomaterial-based intervention with adhesion between CTCs and endothelia has not been reported. Driven by the novel idea that multivalent conjugation of EpCAM and Slex antibodies to dendrimer surface may enhance the capacity and specificity of the nanomaterial conjugates for capturing and down-regulating colorectal CTCs, we conjugated the dendrimer nanomaterial with the EpCAM and Slex antibodies, and examined the capacity of the dual antibody-coated nanomaterial for their roles in interrupting CTCs-related cancer metastasis.

Results

The antibody-coated nanomaterial was synthesized and characterized. The conjugates specifically bound and captured colon cancer cells SW620. The conjugate inhibited the cells’ viability and their adhesion to fibronectin (Fn)-coated substrate or human umbilical vein endothelial cells (HUVECs) in a concentration-dependent manner. In comparison with SW480 and LoVo cell lines, the activity and adhesion of SW620 to Fn-coated substrate and HUVECs were more specifically inhibited by the dual antibody conjugate because of the higher levels of EpCAM and Slex on SW620 cell surface. The hetero-adhesion between SW620 and Fn-coated substrate, or HUVECs was inhibited by about 60-70%. The dual conjugate showed the inhibition capacity more significant than its corresponding single antibody conjugates.

Conclusions

The present study provides the new evidence that coating nanomaterials with more than one antibody against CTCs may effectively interfere with the interaction between SW620 and HUVECs.

Electronic supplementary material

The online version of this article (doi:10.1186/s12951-015-0072-x) contains supplementary material, which is available to authorized users.

Efficient cancer cell capturing SiNWAs prepared via surface-initiated SET-LRP and click chemistry

Enhanced specific cancer cell capturing effect generated by combining a glycopolymer and aptamer through SI-SET-LRP and click chemistry.