Fully Delocalized Mixed-Valent Cu1.5 Cu1.5 Complex: Strong Cu-Cu interaction and Fast Electron Self-Exchange Rate Despite Large Structural Changes

A flexible macrocyclic ligand with two tridentate {CNC} compartments can host two Cu ions in reversibly interconvertible states, Cu^I Cu^I (1) and mixed-valent Cu^1.5 Cu^1.5 (2). They were characterized by XRD and multiple spectroscopic methods, including EPR, UV/Vis absorption and MCD, in combination with TD-DFT and CASSCF calculations. 2 features a short Cu⋅⋅⋅Cu distance (≈2.5 Å; compared to ≈4.0 Å in 1) and a very high delocalization energy of 13 000 cm^-1 , comparable to the mixed-valent state of the biological Cu_A site. Electron self-exchange between 1 and 2 is rapid despite large structural reorganization, and is proposed to proceed via a sequential mechanism involving an active conformer of 1, viz. 1'; the latter has been characterized by XRD. Such electron transfer (ET) process is reminiscent of the conformationally gated ET proposed for biological systems. This redox couple is a unique pair of flexible dicopper complexes, achieving fast electron self-exchange closely related to the function of the Cu_A site.

Application of the Redox-Transmetalation Procedure to Access Divalent Lanthanide and Alkaline-Earth NHC Complexes*

Divalent lanthanide and alkaline-earth complexes supported by N-heterocyclic carbene (NHC) ligands have been accessed by redox-transmetalation between air-stable NHC-AgI complexes and the corresponding metals. By using the small ligand 1,3-dimethylimidazol-2-ylidene (IMe), two series of isostructural complexes were obtained: the tetra-NHC complexes [LnI2 (IMe)4 ] (Ln=Eu and Sm) and the bis-NHC complexes [MI2 (IMe)2 (THF)2 ] (M=Yb, Ca and Sr). In the former, distortions in the NHC coordination were found to originate from intermolecular repulsions in the solid state. Application of the redox-transmetalation strategy with the bulkier 1,3-dimesitylimidazol-2-ylidene (IMes) ligand yielded [SrI2 (IMes)(THF)3 ], while using a similar procedure with Ca metal led to [CaI2 (THF)4 ] and uncoordinated IMes. DFT calculations were performed to rationalise the selective formation of the bis-NHC adduct in [SrI2 (IMe)2 (THF)2 ] and the tetra-NHC adduct in [SmI2 (IMe)4 ]. Since the results in the gas phase point towards preferential formation of the tetra-NHC complexes for both metal centres, the differences between both arrangements are a result of solid-state effects such as slightly different packing forces.

Sterically Demanding AgI and CuI N-Heterocyclic Carbene Complexes: Synthesis, Structures, Steric Parameters, and Catalytic Activity

The synthesis and full characterization of new air-stable AgI and CuI complexes bearing structurally bulky expanded-ring N-heterocyclic carbene (erNHC) ligands is presented. The condensation of protonated NHC salts with Ag2 O afforded a collection of AgI complexes, and their first use as ligand transfer reagents led to novel isostructural CuI or AuI complexes. In situ deprotonation of the NHC salts in the presence of a copper(I) source, provides a library of new CuI complexes. The solid-state structures feature large N-CNHC -N angles (118-128°) and almost identical angles between the aryl groups on the nitrogen atoms and the plane of the N-C-N unit of the carbene (i.e. torsion angles close to 0°). Among the steric parameters, the percent buried volume (%Vbur ) values span easily in the 50-57 % range, and that one of (9-Dipp)CuBr complex (%Vbur =57.5) overcomes to other known erNHC-metal complexes reported to date. Preliminary catalytic experiments in the copper-catalyzed coupling between N-tosylhydrazone and phenylacetylene, afforded 76-93 % product at the 0.5-2.5 mol % catalyst loading, proving the stability of CuI erNHC complexes at elevated temperatures (100 °C).

An Adaptable N-Heterocyclic Carbene Macrocycle Hosting Copper in Three Oxidation States

A neutral hybrid macrocycle with two trans-positioned N-heterocyclic carbenes (NHCs) and two pyridine donors hosts copper in three oxidation states (+I-+III) in a series of structurally characterized complexes (1-3). Redox interconversion of [LCu]+/2+/3+ is electrochemically (quasi)reversible and occurs at moderate potentials (E1/2 =-0.45 V and +0.82 V (vs. Fc/Fc+ )). A linear CNHC -Cu-CNHC arrangement and hemilability of the two pyridine donors allows the ligand to adapt to the different stereoelectronic and coordination requirements of CuI versus CuII /CuIII . Analytical methods such as NMR, UV/Vis, IR, electron paramagnetic resonance, and Cu Kβ high-energy-resolution fluorescence detection X-ray absorption spectroscopies, as well as DFT calculations, give insight into the geometric and electronic structures of the complexes. The XAS signatures of 1-3 are textbook examples for CuI , CuII , and CuIII species. Facile 2-electron interconversion combined with the exposure of two basic pyridine N sites in the reduced CuI form suggest that [LCu]+/2+/3+ may operate in catalysis via coupled 2 e- /2 H+ transfer.

Unsymmetrical NCN-pincer mononuclear and dinuclear nickel(ii) complexes of N-heterocyclic carbene (NHC): synthesis, structure and catalysis for Suzuki-Miyaura cross-coupling

This report describes the synthesis and characterization of a family of unsymmetrical NCN pincer Ni(ii) complexes 2-8 with NHC-triazole arms. All of these complexes have been fully characterized by X-ray single crystal analysis, NMR spectroscopy, and elemental analysis. Complexes 2 and 4-6 were square planar with a chloride trans to the carbene carbon atoms. Complex 3 was a paramagnetic octahedral complex with its central metal surrounded by two NCN pincer ligands. Complexes 7 and 8 contain [(NHC)₂Ni₂-OH] moieties bearing a OH bridge. Both the [(NHC)₂Ni₂-OH] complexes 7 and 8 and [(NC_NHCN)Ni-Cl] complexes 2 and 4-6 were synthesized similarly via the reactions of the in situ formed Ag-NHCs from the corresponding imidazolium salts with [NiCl₂(PPh₃)₂]. The catalytic activities of all complexes for Suzuki-Miyaura cross-coupling were examined. Under the optimized conditions, complex 4 was active in the Suzuki-Miyaura cross-coupling reactions of aryl iodides and aryl bromides at 110 °C. Aryl chlorides were successfully coupled in the presence of triphenylphosphine as an additive.

Chelating bis-N-heterocyclic carbene complexes of iron(ii) containing bipyridyl ligands as catalyst precursors for oxidation of alcohols

Chelating bis-N-heterocyclic carbene (bis-NHC) complexes of iron(ii) containing pyridyl ligands have been prepared by the reaction of [FeCl2L] [L = bipy (1), phen (2)] with [LiN(SiMe3)2] and a bis(imidazolium) salt. The [Fe(bis-NHC)L(I)2] complexes were active pre-catalysts in the oxidation of 1-phenylethanol with tert-butyl hydroperoxide in neat conditions, affording a quantitative yield of acetophenone in 4.5 h. The catalyst could be reused up to six cycles giving a turnover number (TON) of 1500. Various secondary alcohols, both aromatic and aliphatic were selectivity oxidised to the corresponding ketones in excellent yields. Compound 1 is stable in acetonitrile solution for ca. 4 h, although after 16 h, it evolves to a mixture of [Fe(bis-NHC)(bipy)2]I2 (3), [Fe(bipy)3](2+) and bis-imidazolium salt. The molecular structure of 3 has been determined by X-ray diffraction studies.

Structural diversity of copper(I)-N-heterocyclic carbene complexes; ligand tuning facilitates isolation of the first structurally characterised copper(I)-NHC containing a copper(I)-alkene interaction

The preparation of a series of imidazolium salts bearing N-allyl substituents, and a range of substituents on the second nitrogen atom that have varying electronic and steric properties, is reported. The ligands have been coordinated to a copper(I) centre and the resulting copper(I)-NHC (NHC=N-heterocyclic carbene) complexes have been thoroughly examined, both in solution and in the solid-state. The solid-state structures are highly diverse and exhibit a range of unusual geometries and cuprophilic interactions. The first structurally characterised copper(I)-NHC complex containing a copper(I)-alkene interaction is reported. An N-pyridyl substituent, which forms a dative bond with the copper(I) centre, stabilises an interaction between the metal centre and the allyl substituent of a neighbouring ligand, to form a 1D coordination polymer. The stabilisation is attributed to the pyridyl substituent increasing the electron density at the copper(I) centre, and thus enhancing the metal(d)-to-alkene(π*) back-bonding. In addition, components other than charge transfer appear to have a role in copper(I)-alkene stabilisation because further increases in the Lewis basicity of the ligand disfavours copper(I)-alkene binding.