Ein Verfahren zur Herstellung von Ameisensäure durch CO2-Hydrierung: Thermodynamik und die Rolle von CO

Copper(I) Complexes Containing PCP Ligand Catalyzed Hydrogenation of Carbon Dioxide to Formate under Ambient Conditions

The five new copper(I) complexes [Cu₂(μ-Cl)₂(κ¹-PCP^t-Bu)] (1), [Cu₂(μ-Br)₂(κ¹-PCP^t-Bu)] (2), [Cu₂(μ-I)₂(κ¹-PCP^t-Bu)] (3), [Cu₂(μ-CN)₂(κ¹-PCP^t-Bu)] (4), and [Cu₄(μ₃-SCN)₄(κ¹-PCP^t-Bu)₂]·CH₂Cl₂ (5) bearing a 1,3-bis[(di-tert-butylphosphino)methyl]benzene ligand were synthesized and characterized spectroscopically, and the molecular structures of 1, 3, and 5 were determined by single-crystal X-ray diffraction techniques. Structural studies for 1 and 3 revealed their binuclear structures with Cu···Cu separations of 2.609(3) and 2.6359(19) Å, respectively. However, 5 has a tetranuclear cubane structure with an 18-electron configuration at each copper without any metal-metal bonds. The two copper centers in 1 and 3 are bonded to one bridging PCP^t-Bu ligand in a κ¹-manner and two bridging (pseudo)halido ligands in a μ₂-bonding mode to generate a nonplanar Cu₂(μ-X)₂ framework. The four copper centers in 5 are at the vertices of a tetrahedron. Each copper center has pseudo-tetrahedral coordination provided by two bridging PCP^t-Bu ligands in a κ¹-manner and the four bridging thiocyanate groups in a μ₃-manner. These complexes were used as catalysts for the hydrogenation of CO₂ to formate in the presence of DBU as a base to produce valuable energy-rich chemicals, and therefore it is a promising, safe, and simple strategy to conduct reactions under ambient pressure at room temperature. Among all of the five copper(I) complex based catalysts, 3 displayed the best catalytic performance with turnover number (TON) values of 38-8700 in 12-48 h of reaction at 25-80 °C. The outstanding catalytic performance of [Cu₂(μ-I)₂(κ¹-PCP^t-Bu)] (3) makes it a potential candidate for realizing the large-scale production of formate by CO₂ hydrogenation.

A highly active copper catalyst for the hydrogenation of carbon dioxide to formate under ambient conditions

Carbon dioxide (CO2) is an important reactant and can be used for the syntheses of various types of industrially important chemicals. Hence, investigation concerning the conversion of CO2 into valuable energy-rich chemicals is an important and current topic in molecular catalysis. Recent research on molecular catalysts has led to improved rates for conversion of CO2 to energy-rich products such as formate, but the catalysts based on first-row transition metals are underdeveloped. Copper(i) complexes containing the 1,1'-bis(di-tert-butylphosphino) ferrocene ligand were found to promote the catalytic hydrogenation of CO2 to formate in the presence of DBU as the base, where the catalytic conversion of CO2via hydrogenation is achieved using in situ gaseous H2 (granulated tin metal and concentrated HCl) to produce valuable energy-rich chemicals, and therefore it is a promising, safe and simple strategy to conduct reactions under ambient pressure at room temperature. Towards this goal, we report an efficient copper(i) complex based catalyst [CuI(dtbpf)] to achieve ambient-pressure CO2 hydrogenation catalysis for generating the formate salt (HCO2-) with turnover number (TON) values of 326 to 1.065 × 105 in 12 to 48 h of reaction at 25 °C to 80 °C. The outstanding catalytic performance of [CuI(dtbpf)] makes it a potential candidate for realizing the large-scale production of formate by CO2 hydrogenation.

Efficient and Selective N-Methylation of Nitroarenes under Mild Reaction Conditions

Herein, we report a straightforward protocol for the preparation of N,N-dimethylated amines from readily available nitro starting materials using formic acid as a renewable C₁ source and silanes as reducing agents. This tandem process is efficiently accomplished in the presence of a cubane-type Mo₃ PtS₄ catalyst. For the preparation of the novel [Mo₃ Pt(PPh₃ )S₄ Cl₃ (dmen)₃ ]⁺ (3⁺ ) (dmen: N,N'-dimethylethylenediamine) compound we have followed a [3+1] building block strategy starting from the trinuclear [Mo₃ S₄ Cl₃ (dmen)₃ ]⁺ (1⁺ ) and Pt(PPh₃ )₄ (2) complexes. The heterobimetallic 3⁺ cation preserves the main structural features of its 1⁺ cluster precursor. Interestingly, this catalytic protocol operates at room temperature with high chemoselectivity when the 3⁺ catalyst co-exists with its trinuclear 1⁺ precursor. N-heterocyclic arenes, double bonds, ketones, cyanides and ester functional groups are well retained after N-methylation of the corresponding functionalized nitroarenes. In addition, benzylic-type as well as aliphatic nitro compounds can also be methylated following this protocol.

Synthesis of Asymmetrical Organic Carbonates using CO2 as a Feedstock in AgCl/Ionic Liquid System at Ambient Conditions

Synthesis of asymmetrical organic carbonates from the renewable and inexpensive CO₂ is of great importance but also challenging, especially at ambient conditions. Herein, we found that some metal salt/ionic liquid catalyst systems were highly active for the synthesis of asymmetrical organic carbonates from CO₂ , propargylic alcohols, and primary alcohols. Especially, the AgCl/1-butyl-3-methylimidazolium acetate ([Bmim][OAc]) system was very efficient for the reactions of a wide range of substrates at room temperature and atmospheric pressure, and the yields of the asymmetrical organic carbonates could approach 100 %. The catalyst system could be reused at least five times without changing its catalytic performance, and could be easily recovered and reused. A detailed study indicated that AgCl and [Bmim][OAc] catalyzed the reactions cooperatively, resulting in unique catalytic performance.

Aqueous Biphasic Systems for the Synthesis of Formates by Catalytic CO2 Hydrogenation: Integrated Reaction and Catalyst Separation for CO2 -Scrubbing Solutions

Aqueous biphasic systems were investigated for the production of formate-amine adducts by metal-catalyzed CO₂ hydrogenation, including typical scrubbing solutions as feedstocks. Different hydrophobic organic solvents and ionic liquids could be employed as the stationary phase for cis-[Ru(dppm)₂ Cl₂ ] (dppm=bis-diphenylphosphinomethane) as prototypical catalyst without any modification or tagging of the complex. The amines were found to partition between the two phases depending on their structure, whereas the formate-amine adducts were nearly quantitatively extracted into the aqueous phase, providing a favorable phase behavior for the envisaged integrated reaction/separation sequence. The solvent pair of methyl isobutyl carbinol (MIBC) and water led to the most practical and productive system and repeated use of the catalyst phase was demonstrated. The highest single batch activity with a TOF_av of approximately 35 000 h^-1 and an initial TOF of approximately 180 000 h^-1 was achieved in the presence of NEt₃ . Owing to higher stability, the highest productivities were obtained with methyl diethanolamine (Aminosol CST 115) and monoethanolamine (MEA), which are used in commercial scale CO₂ -scrubbing processes. Saturated aqueous solutions (CO₂ overpressure 5-10 bar) of MEA could be converted into the corresponding formate adducts with average turnover frequencies up to 14×10³  h^-1 with an overall yield of 70 % based on the amine, corresponding to a total turnover number of 150 000 over eleven recycling experiments. This opens the possibility for integrated approaches to carbon capture and utilization.

Formation of Gas-Phase Formate in Thermal Reactions of Carbon Dioxide with Diatomic Iron Hydride Anions

The hydrogenation of carbon dioxide involves the activation of the thermodynamically very stable molecule CO₂ and formation of a C-H bond. Herein, we report that HCO₂^- and CO can be formed in the thermal reaction of CO₂ with a diatomic metal hydride species, FeH^- . The FeH^- anions were produced by laser ablation, and the reaction with CO₂ was analyzed by mass spectrometry and quantum-chemical calculations. Gas-phase HCO₂^- was observed directly as a product, and its formation was predicted to proceed by facile hydride transfer. The mechanism of CO₂ hydrogenation in this gas-phase study parallels similar behavior of a condensed-phase iron catalyst.

Steric and Electronic Effects of Bidentate Phosphine Ligands on Ruthenium(II)-Catalyzed Hydrogenation of Carbon Dioxide

The reactivity difference between the hydrogenation of CO2 catalyzed by various ruthenium bidentate phosphine complexes was explored by DFT. In addition to the ligand dmpe (Me2 PCH2 CH2 PMe2 ), which was studied experimentally previously, a more bulky diphosphine ligand, dmpp (Me2 PCH2 CH2 CH2 PMe2 ), together with a more electron-withdrawing diphosphine ligand, PN(Me) P (Me2 PCH2 N(Me) CH2 PMe2 ), have been studied theoretically to analyze the steric and electronic effects on these catalyzed reactions. Results show that all of the most favorable pathways for the hydrogenation of CO2 catalyzed by bidentate phosphine ruthenium dihydride complexes undergo three major steps: cis-trans isomerization of ruthenium dihydride complex, CO2 insertion into the Ru-H bond, and H2 insertion into the ruthenium formate ion. Of these steps, CO2 insertion into the Ru-H bond has the lowest barrier compared with the other two steps in each preferred pathway. For the hydrogenation of CO2 catalyzed by ruthenium complexes of dmpe and dmpp, cis-trans isomerization of ruthenium dihydride complex has a similar barrier to that of H2 insertion into the ruthenium formate ion. However, in the reaction catalyzed by the PN(Me) PRu complex, cis-trans isomerization of the ruthenium dihydride complex has a lower barrier than H2 insertion into the ruthenium formate ion. These results suggest that the steric effect caused by the change of the outer sphere of the diphosphine ligand on the reaction is not clear, although the electronic effect is significant to cis-trans isomerization and H2 insertion. This finding refreshes understanding of the mechanism and provides necessary insights for ligand design in transition-metal-catalyzed CO2 transformation.

Selective Catalytic Synthesis Using the Combination of Carbon Dioxide and Hydrogen: Catalytic Chess at the Interface of Energy and Chemistry

The present Review highlights the challenges and opportunities when using the combination CO2 /H2 as a C1 synthon in catalytic reactions and processes. The transformations are classified according to the reduction level and the bond-forming processes, covering the value chain from high volume basic chemicals to complex molecules, including biologically active substances. Whereas some of these concepts can facilitate the transition of the energy system by harvesting renewable energy into chemical products, others provide options to reduce the environmental impact of chemical production already in today's petrochemical-based industry. Interdisciplinary fundamental research from chemists and chemical engineers can make important contributions to sustainable development at the interface of the energetic and chemical value chain. The present Review invites the reader to enjoy this exciting area of "catalytic chess" and maybe even to start playing some games in her or his laboratory.

Formate: an Energy Storage and Transport Bridge between Carbon Dioxide and a Formate Fuel Cell in a Single Device

We demonstrate the first device to our knowledge that uses a solar panel to power the electrochemical reduction of dissolved carbon dioxide (carbonate) into formate that is then used in the same device to operate a direct formate fuel cell (DFFC). The electrochemical reduction of carbonate is carried out on a Sn electrode in a reservoir that maintains a constant carbon balance between carbonate and formate. The electron-rich formate species is converted by the DFFC into electrical energy through electron release. The product of DFFC operation is the electron-deficient carbonate species that diffuses back to the reservoir bulk. It is possible to continuously charge the device using alternative energy (e.g., solar) to convert carbonate to formate for on-demand use in the DFFC; the intermittent nature of alternative energy makes this an attractive design. In this work, we demonstrate a proof-of-concept device that performs reduction of carbonate, storage of formate, and operation of a DFFC.

Carbon cycle in advanced coal chemical engineering

This review summarizes how the carbon cycle occurs and how to reduce CO2 emissions in highly efficient carbon utilization from the most abundant carbon source, coal. Nowadays, more and more attention has been paid to CO2 emissions and its myriad of sources. Much research has been undertaken on fossil energy and renewable energy and current existing problems, challenges and opportunities in controlling and reducing CO2 emission with technologies of CO2 capture, utilization, and storage. The coal chemical industry is a crucial area in the (CO2 value chain) Carbon Cycle. The realization of clean and effective conversion of coal resources, improving the utilization and efficiency of resources, whilst reducing CO2 emissions is a key area for further development and investigation by the coal chemical industry. Under a weak carbon mitigation policy, the value and price of products from coal conversion are suggested in the carbon cycle.

Transformation of atmospheric CO2 catalyzed by protic ionic liquids: efficient synthesis of 2-oxazolidinones

Protic ionic liquids (PILs), such as 1,8-diazabicyclo[5.4.0]-7-undecenium 2-methylimidazolide [DBUH][MIm], can catalyze the reaction of atmospheric CO2 with a broad range of propargylic amines to form the corresponding 2-oxazolidinones. The products are formed in high yields under mild, metal-free conditions. The cheaper and greener PILs can be easily recycled and reused at least five times without a decrease in the catalytic activity and selectivity. A reaction mechanism was proposed on the basis of a detailed DFT study which indicates that both the cation and anion of the PIL play key synergistic roles in accelerating the reaction.