Temperature-Responsive “Catch and Release” of Proteins by using Multifunctional Polymer-Based Nanoparticles

Multi-Factors Cooperatively Actuated Photonic Hydrogel Aptasensors for Facile, Label-Free and Colorimetric Detection of Lysozyme

Responsive two-dimensional photonic crystal (2DPC) hydrogels have been widely used as smart sensing materials for constructing various optical sensors to accurately detect different target analytes. Herein, we report photonic hydrogel aptasensors based on aptamer-functionalized 2DPC poly(acrylamide-acrylic acid-N-tert-butyl acrylamide) hydrogels for facile, label-free and colorimetric detection of lysozyme in human serum. The constructed photonic hydrogel aptasensors undergo shrinkage upon exposure to lysozyme solution through multi-factors cooperative actuation. Here, the specific binding between the aptamer and lysozyme, and the simultaneous interactions between carboxyl anions and N-tert-butyl groups with lysozyme, increase the cross-linking density of the hydrogel, leading to its shrinkage. The aptasensors’ shrinkage decreases the particle spacing of the 2DPC embedded in the hydrogel network. It can be simply monitored by measuring the Debye diffraction ring of the photonic hydrogel aptasensors using a laser pointer and a ruler without needing sophisticated apparatus. The significant shrinkage of the aptasensors can be observed by the naked eye via the hydrogel size and color change. The aptasensors show good sensitivity with a limit of detection of 1.8 nM, high selectivity and anti-interference for the detection of lysozyme. The photonic hydrogel aptasensors have been successfully used to accurately determine the concentration of lysozyme in human serum. Therefore, novel photonic hydrogel aptasensors can be constructed by designing functional monomers and aptamers that can specifically bind target analytes.

Engineered polymer nanoparticles incorporating l-amino acid groups as affinity reagents for fibrinogen

Synthetic polymer hydrogel nanoparticles (NPs) were developed to function as abiotic affinity reagents for fibrinogen. These NPs were made using both temperature-sensitive N-isopropyl acrylamide (NIPAm) and l-amino acid monomers. Five kinds of l-amino acids were acryloylated to obtain functional monomers: l-phenylalanine (Phe) and l-leucine (Leu) with hydrophobic side chains, l-glutamic acid (Glu) with negative charges, and l-lysine (Lys) and l-arginine (Arg) with positive charges. After incubating the NPs with fibrinogen, γ-globulin, and human serum albumin (HSA) respectively, the NPs that incorporated N-acryloyl-Arg monomers (AArg@NPs) showed the strongest and most specific binding affinity to fibrinogen, when compared with γ-globulin and HSA. Additionally, the fibrinogen-AArg binding model had the best docking scores, and this may be due to the interaction of positively charged AArg@NPs and the negatively charged fibrinogen D domain and the hydrophobic interaction between them. The specific adsorption of AArg@NPs to fibrinogen was also confirmed by the immunoprecipitation assay, as the AArg@NPs selectively trapped the fibrinogen from a human plasma protein mixture. AArg@NPs had a strong selectivity for, and specificity to, fibrinogen and may be developed as a potential human fibrinogen-specific affinity reagent.

Preparation, stimuli-response performance of HPC-PMAA/PpIX nanogels and their application in photodynamic therapy

In the present study, a novel nanogel of HPC-PMAA/PpIX with thermo- and pH sensitive performance and its application in cancer photodynamic therapy is reported. HPC-PMAA/PpIX nanogels were prepared by free radical polymerization method with HPC as template, hydroxypropyl cellulose (HPC), methyl acrylic acid (MAA), protoporphyrin IX (PpIX) and N,N'-methylene bisacrylamide (BIS) as raw materials. The as-prepared nanogels were characterized by Fourier transform infrared (FTIR), photoluminescence (PL) and UV-visible spectrophotometer (UV-vis), dynamic light scattering (DLS) and transmission electron microscopy (TEM). PL and UV-vis spectra demonstrate that PpIX is incorporated into HPC-PMAA by covalent bonds, and its aggregation is prevented. Moreover, the as-prepared nanogels can be dispersed in water over 1 week, significant singlet oxygen can be produced under irradiation of laser. With tumor cell of HepG2 as model cell, the nanogels are biocompatible with cell viability of >85% even at high concentrations of the PpIX in vitro. In addition, the HPC-PMAA/PpIX nanogels show photo-dependent toxicity in the concentration range of 10 µg/mL of PpIX, suggesting that HPC-PMAA/PpIX nanogels have potential for the treatment of photodynamic therapy (PDT).

Radical Cation Initiated Surface Polymerization on Photothermal Rubber for Smart Antifouling Coatings

Biofouling on surfaces of various materials has attracted considerable attention in biomedical and marine industries. Surface grafting based on covalent surface-initiated polymerization offers a popular route to address this problem by providing diverse robust polymer coatings capable of preventing the biofouling in complex environments. However, the existing methods for synthesizing polymer coatings are complicated and rigorous, or require special catalysts, greatly limiting their practical applications. In this work, a radical-cation-based surface-initiated polymerization protocol to graft the surface of darkened trans-polyisoprene (TPI) rubber with a thermo-responsive smart polymer, poly(N-isopropylacrylamide) (PNIPAM), through a simple iodine doping process is reported. A series of characterizations were performed to provide adequate evidence to confirm the successful grafting. Combining the thermal sensitivity of PNIPAM with the photothermal conversion ability of the darkened rubber, efficient bacteria-killing and antifouling capabilities were successfully achieved as a result of temperature-controlled iodine release and switchable amphiphilicity of PNIPAM.

Three-Component Supramolecular System with Multistimuli-Responsive Properties in Water

Hyperbranched polyethylenimine terminated with isobutyramide groups (HPEI-IBAm), 4-(phenylazo)benzoic acid (PABA), and α-cyclodextrin (α-CD) were assembled together at pH≈7 to form the three-component supramolecular complexes that were verified by (1) H and 2D ROESY (1) H NMR spectroscopy. UV/Vis spectrometric titration experiments showed that the content of α-CD in the three-component complexes was less than the feed amount and it was difficult for all the PABA units in the complexes to further form complexes with α-CD. The obtained three-component supramolecular complexes exhibited thermoresponsive properties in water. Increasing the α-CD concentration led to a sharp increase in the cloud point temperature (Tcp ) at the beginning, but after the [α-CD]/[PABA] ratio was in the region of 1.3-1.6, the Tcp increased gradually When the concentration of α-CD was low, a higher concentration of PABA led to a lower Tcp , however, the opposite was observed when the concentration of α-CD was high. For the three-component complex, increasing the α-CD concentration at pH≈7 or at pH≈9 led to different Tcp temperatures. In the low α-CD concentration range, adjusting the pH from ≈7-≈9 resulted in an increase in the Tcp , similar but not so pronounced as that of the two-component system of HPEI-IBAm/[PABA]. When the concentration of α-CD was high, adjusting the pH from ≈7-≈9 decreased the Tcp ; this observation is different to that of the two-component system of HPEI-IBAm/[PABA]. Reversible trans-to-cis photoisomerization of azobenzene units in the complexes occurred, following irradiation with UV or visible light. Trans-to-cis isomerization of azobenzene units decreased the Tcp . However, this result differed to that of the two-component system of HPEI-IBAm/PABA.

Temperature-responsive microgel films as reversible carbon dioxide absorbents in wet environment

Hydrogel films composed of temperature-responsive microgel particles (GPs) containing amine groups work as stimuli-responsive carbon dioxide absorbent with a high capacity of approximately 1.7 mmol g(-1). Although the dried films did not show significant absorption, the reversible absorption capacity dramatically increased by adding a small amount of water (1 mL g(-1)). The absorption capacity was independent of the amount of added water beyond 1 mL g(-1), demonstrating that the GP films can readily be used under wet conditions. The amount of CO2 absorbed by the GP films was proportional to their thickness up to 200-300 μm (maximum capacity of about 2 L m(-2) . Furthermore, the films consisting of GPs showed faster and greater absorption and desorption of CO2 than that of monolithic hydrogel films. These results indicated the importance of a fast stimulus response rate of the films that are composed of GPs in order to achieve long-range and fast diffusion of bicarbonate ions. Our study revealed the potential of stimuli-responsive GP films as energy-efficient absorbents to sequester CO2 from high-humidity exhaust gases.

Engineered synthetic polymer nanoparticles as IgG affinity ligands

A process for the preparation of an abiotic protein affinity ligand is described. The affinity ligand, a synthetic polymer hydrogel nanoparticle (NP), is formulated with functional groups complementary to the surface presentation of the target protein. An iterative process is used to improve affinity by optimizing the composition and proportion of functional monomers. Since the polymer NPs are formed by a kinetically driven process, the sequence of functional monomers in the polymer chain is not controlled; only the average composition can be adjusted by the stoichiometry of the monomers in the feed. To compensate for this the hydrogel NP is lightly cross-linked resulting in chain flexibility that takes place on a submillisecond time scale allowing the polymer to "map" onto a protein surface with complementary functionality. In this study, we report a lightly cross-linked (2%) N-isopropyl acrylamide (NIPAm) synthetic polymer NP (50-65 nm) incorporating hydrophobic and carboxylate groups that binds with high affinity to the Fc fragment of IgG. The affinity and amount of NP bound to IgG is pH dependent. The hydrogel NP inhibits protein A binding to the Fc domain at pH 5.5, but not at pH 7.3. A computational analysis was used to identify potential NP-protein interaction sites. Candidates include a NP binding domain that overlaps with the protein A-Fc binding domain at pH 5.5. The computational analysis supports the inhibition experimental results and is attributed to the difference in the charged state of histidine residues. Affinity of the NP (3.5-8.5 nM) to the Fc domain at pH 5.5 is comparable to protein A at pH 7. These results establish that engineered synthetic polymer NPs can be formulated with an intrinsic affinity to a specific domain of a large biomacromolecule.

A smart nanofiber web that captures and releases cells

Caught in a web: Photo-cross-linkable temperature-responsive polymer-based nanofiber webs have been synthesized that have the ability to capture, encapsulate, and release cells by dynamically transforming the fibrous structure into hydrogel-like structures by wrapping, swelling, and deswelling processes in response to external temperature changes (see picture).