Piezochromic Luminescence Based on the Molecular Aggregation of 9,10-Bis((E)-2-(pyrid-2-yl)vinyl)anthracene

Full-Color Emissive D-D-A Carbazole Luminophores: Red-to-NIR Mechano-fluorochromism, Aggregation-Induced Near-Infrared Emission, and Application in Photodynamic Therapy

The preparation of multifunctionalized luminophores with full-color emission based on an identical core skeleton is a significative but challenging research topic. In this work, eight donor-donor-acceptor (D-D-A)-type luminogens based on a central carbazole core bearing a C₆ hydrocarbon chain were designed by using different kinds of donor and acceptor units on the left and right, and synthesized in good yields. These D-D-A carbazole derivatives display deep-blue, sky-blue, cyan, green, yellow-green, yellow, orange and red fluorescence in the solid state, achieving full-color emission covering the whole visible light range under UV light illumination. Notably, the dicyano-functionalized triphenylamine-containing carbazole derivative exhibits rare aggregation-induced near-infrared emission and red-to-near-infrared mechano-fluorochromism with high contrast beyond 100 nm. Furthermore, the red-emissive luminogen can serve as a potential candidate for cell imaging and photodynamic therapy (PDT). This work not only provides reference for the construction of full-color emissive systems but also opens a new avenue to the preparation of multifunctionalized luminophores capable of simultaneous application in near-Infrared mechanical-force sensors and PDT fields.

Highly Efficient Sky-Blue π-Stacked Thermally Activated Delayed Fluorescence Emitter with Multi-Stimulus Response Properties

Organic materials with multi-stimulus response (MSR) properties have demonstrated many potential and practical applications. Herein, a π-stacked thermally activated delayed fluorescence (TADF) material with multi-stimulus response (MSR) properties, named SDMAC, was designed and synthesized using distorted 9,9-dimethyl-10-phenyl-9,10-dihydroacridine as a donor. SDMAC possesses a rigid π-stacked configuration with intramolecular through-space interactions and exhibits aggregation-induced emission enhancement (AIEE), solvatochromic, piezochromic, and circularly polarized luminescence (CPL) under different external stimuli. The rigid molecular structure and efficient TADF properties of SDMAC can be used in displays and lighting. Using SDMAC as an emitter, the maximum external quantum efficiency (EQE) of the fabricated organic light-emitting diodes (OLEDs) is as high as 28.4 %, which make them the most efficient CP-TADF OLEDs based on the through-space charge transfer strategy. The CP organic light-emitting diodes (CP-OLEDs) exhibit circularly polarized electroluminescence (CPEL) signals.

Structural Phase Transitions in Anthracene Crystals

Anthracene (C14 H10 ) and its derivatives, π-conjugated molecules in acenes, have been widely researched in terms of their reactions, physical properties, and self-assembly (or crystal engineering). These molecules can be functionalized to tune reactivities, optoelectronic properties, and self-assembling abilities. Structural changes in the molecular assemblies, solid states, and crystals have recently been discovered. Therefore, a systematic discussion of anthracene's molecular structure, packing, and optical properties based on its intermolecular structure and phase transitions is important for future chemical and structural design. In the present review, we discuss anthracene's molecular design, dimer packing, and crystal structure, focusing on the structural phase transitions of its crystals. We also provide examples of the phase transitions of anthracene crystals. Changes to edge-to-face of CH-π interaction and face-to-face packing of π-π interaction affect the thermodynamic stabilities of various crystal structures. These structures can inform the prediction of structural and physical properties.

Design of Stimuli-Responsive Phenothiazine Derivatives with Triplet-Related Dual Emission and High-Contrast Mechanochromism Guided by Polymorph Prediction

The development of high-contrast stimulus-responsive materials with excited triplet emission is of great significance for anti-counterfeiting, sensor and memory applications, but remains a challenge. Here, we report a strategy for the rational design of stimulus-responsive phenothiazine derivatives with triplet-related dual emissions and high-contrast mechanochromism guided by Polymorph Prediction. The designed phenothiazine derivatives have the characters of simple structures, a facile synthetic procedure, and a good crystalline nature. We found that the crystals of those derivatives with the potential to form both quasi-axial (ax) and quasi-equatorial (eq) conformations could undergo conformation transition and show significant emission difference (Δλ_em >100 nm) under mechanical force. Meanwhile, all these phenothiazine derivatives exhibit aggregation-induced emission and emit room-temperature phosphorescence or thermally activated delayed fluorescence. The significant luminescent change of these materials under different stimuli gives them promise for applications in encryption and anti-counterfeiting.

Reversible Three-Color Fluorescence Switching of an Organic Molecule in the Solid State via "Pump-Trigger" Optical Manipulation

In photoswitches that undergo fluorescence switching upon ultraviolet irradiation, photoluminescence and photoisomerization often occur simultaneously, leading to unstable fluorescence properties. Here, we successfully demonstrated reversible solid-state triple fluorescence switching through "Pump-Trigger" multiphoton manipulation. A novel fluorescence photoswitch, BOSA-SP, achieved green, yellow, and red fluorescence under excitation by pump light and isomerization induced by trigger light. The energy ranges of photoexcitation and photoisomerization did not overlap, enabling appropriate selection of the multiphoton light for "pump" and "trigger" photoswitching, respectively. Additionally, the large free volume of the spiropyran (SP) moiety in the solid state promoted reversible photoisomerization. Switching between "pump" and "trigger" light is useful for three-color tunable switching cell imaging, which can be exploited in programmable fluorescence switching. Furthermore, we exploited reversible dual-fluorescence switching in a single molecular system to successfully achieve two-color super-resolution imaging.

Dynamic Full-Color Tuning of Organic Chromophore in a Multi-Stimuli-Responsive 2D Flexible MOF

Developing universal stimuli-responsive materials capable of emitting a broad spectrum of colors is highly desirable. Herein, we deliberately grafted a conformation-adaptable organic chromophore into the established coordination space of a flexible metal-organic framework (MOF). In terms of the coupled structural transformations and the space confinement, the chromophore in the MOF matrix underwent well-regulated conformational changes under physical and chemical stimuli, simultaneously displaying thermo-, piezo-, and solvato-fluoro-chromism with color tunability over the visible range. Owing to the resilient nature and the reduced dimensionality of the selected coordination space, all three color modulations behaved in a sensitive and self-reversible manner, each following a linear correlation of the emission maximum with stimulus. Single-crystal X-ray diffraction of the variable-temperature structures and solvent-inclusion crystals elucidated the intricate color varying mechanisms.

Supramolecular self-assembly mediated aggregation-induced emission of fluorene-derived cyanostilbenes: multifunctional probes for live cell-imaging

The first discovery of aggregation-induced emission (AIE), whereby luminogen aggregation plays a positive role in enhancing the light-emission efficiency, has piqued the interest of many researchers as it opens up a new avenue for the exploration of practically beneficial luminescent materials. Diverse AIE-active luminogens (or AIEgens) with tunable emission colours and very high quantum yields (up to unity) in the solid state have been extensively utilised in a broad range of fields including optoelectronics, energy and bioscience. In this article, we describe novel fluorene-based fluorogens that exhibit bright emission in the solid-state, mechanical stimuli-responsive optical properties and aggregation-induced emissive ability, and were able to modulate their donor and acceptor properties. The target compounds were synthesized by a Knoevenagel condensation followed by Suzuki cross-coupling reaction, which tends to result in good yields. The target cyanostilbenes (4a-4d) show different reversibly switched states with high contrast through morphology modulation and demonstrate solvatochromic, vapochromic, and AIE properties. These results strongly suggest that compound 4d has better properties than the other derivatives (4a-c) due to the presence of extended donor-acceptor ability. Moreover, density-functional theory (DFT) calculations strongly support the UV-Vis and fluorescence spectral studies. The formation of nano-flakes and cuboid-shaped nanocrystals was further confirmed by FE-SEM and AFM studies. The synthesized compound 4d displayed very bright emission in the solid state and in the aggregate state as compared with the other derivatives (4a-4c). These results might be due to the presence of high-color contrast, which is an advantage for elucidation and overcomes the challenges exhibited in live-cell imaging applications. Moreover, an MTT assay on live A549 cells incubated with the target compound (4d) showed very low cytotoxicity even at high concentrations.

Mechanochromic Luminescence (MCL) of Purely Organic Two-Component Dyes: Wide-Range MCL over 300 nm and Two-Step MCL by Charge-Transfer Complexation

Despite recent extensive studies on mechanochromic luminescence (MCL), rational control over the magnitude of the emission-wavelength shift in response to mechanical stimuli remains challenging. In the present study, a two-component donor-acceptor approach has been applied to create a variety of organic MCL composites that exhibit remarkable emission-wavelength switching. Dibenzofuran-based bis(1-pyrenylmethyl)diamine and typical organic fluorophores have been employed as donor and acceptor dyes, respectively. Outstanding wide-range MCL with an emission-wavelength shift of over 300 nm has been achieved by mixing the diamine with 3,4,9,10-perylenetetracarboxylic diimide. Unprecedented two-step MCL in response to mechanical stimuli of different intensity has also been realized for a two-component mixture with 9,10-anthraquinone. Fluorescence microscopy observations at the single-particle level revealed that the segregation and mixing of the two-component dyes contribute to the stimuli-responsive emission-color switching of the MCL composites.

Delineating Conformation Control in the Photophysical Behaviour of a Molecular Donor-Acceptor-Donor Triad

Mechanochromic luminescent materials, exhibiting a change in luminescence behavior under external stimuli have emerged as one of the promising candidates for upcoming efficient OLEDs. Recently mechanochromic luminescence was reported in a donor-acceptor-donor (D-A-D) triad featuring two phenothiazine units separated by a dibenzo[a,j]phenazine motif. The triad follows different emissive routes ranging from phosphorescence to TADF based on the conformational switching of the D units. In this article, we investigate such conformation-dependent photophysical behavior of this triad through theoretical calculations. By analyzing the nature of ground state, excited state and factors determining the reverse ISC crossing rates associated with the relative orientation of the D and A units, we delineate the effect of the conformational changes on their photophysical properties. Our findings reveal that axial orientation of both the donor groups enhances the overlap between HOMO and LUMO leading to a large singlet-triplet gap ( Δ E S T ) which drives phosphorescence emission. On the contrary, the equatorial orientation of the donor groups minimizes Δ E S T to facilitate rISC making the conformers TADF active. The role of several geometric factors affecting the photophysical properties of the conformers is also highlighted. Finally, we show how to regulate the population difference among the conformers by functionalizing the triad to harvest the maximum TADF efficiency.

Regulation of Multicolor Fluorescence Changes Found in Donor-acceptor-type Mechanochromic Fluorescent Dyes

The regulation of multicolor fluorescence changes in mechanochromic fluorescence (MCF) remains a challenging task. Herein, we report the regulation of MCF using a donor-acceptor structure. Two crystal polymorphs, BTD-pCHO(O) and BTD-pCHO(R) produced by the introduction of formyl groups to an MCF dye, respond to a mechanical stimulus, allowing a three-color fluorescence change. Specifically, the orange-colored fluorescence of the metastable BTD-pCHO(O) polymorph changed to a deep-red color in the amorphous-like state to finally give a red color in the stable BTD-pCHO(R) polymorph. This change occurred by mechanical grinding followed by vapor fuming. The two different crystal packing patterns were selectively regulated by the electronic effect of the introduced functional groups. The two types of selectively formed crystals in BTD(F)-pCHO bearing fluorine atoms, and BTD(OMe)-pCHO bearing methoxy groups, respond to mechanical grinding, allowing for the regulation of multicolor MCL from a three-color change to two different types of two-color changes.

Synthesis of Anthracene-Based Cyclic π-Clusters and Elucidation of their Properties Originating from Congested Aromatic Planes

Synthesis and properties of anthracene-based cyclic π-clusters which possess two and four anthracene units are discussed. The optimal cyclization conditions were determined based on a nickel(0)-mediated reaction that afforded a cyclic anthracene dimer as the major product. Bringing two anthracene planes in close proximity in a face-to-face manner resulted in red-shifted absorption owing to the narrowing of the HOMO-LUMO gap. The cyclic anthracene dimer exhibits multi-stimuli responsiveness due to high π-congestion. For example, photoirradiation on the anthracene dimer affords its photoisomer having C-C bonds that are longer than 1.65 Å, which can undergo thermal reversion under gentle heating. This enabled mechanochromism of the photoisomer (colorless) to the original anthracene dimer (red). Photoisomerization was also observed in the crystalline state, accompanied by crystal jumping or collapsing, that is, the photosalient effect.

Mechanochromic Delayed Fluorescence Switching in Propeller-Shaped Carbazole-Isophthalonitrile Luminogens with Stimuli-Responsive Intramolecular Charge-Transfer Excited States

Herein, the universal design of high-efficiency stimuli-responsive luminous materials endowed with mechanochromic luminescence (MCL) and thermally activated delayed fluorescence (TADF) functions is reported. The origin of the unique stimuli-triggered TADF switching for a series of carbazole-isophthalonitrile-based donor-acceptor (D-A) luminogens is demonstrated based on systematic photophysical and X-ray analysis, coupled with theoretical calculations. It was revealed that a tiny alteration of the intramolecular D-A twisting in the excited-state structures governed by the solid morphologies is responsible for this dynamic TADF switching behavior. This concept is applicable to the fabrication of bicolor emissive organic light-emitting diodes using a single TADF emitter.

Enhanced Long Persistent Luminescence by Multifold Interpenetration in Metal-Organic Frameworks

Metal-organic frameworks (MOFs) with long persistent luminescence (LPL) have attracted widespread attention due to potential applications in displays, anticounterfeiting, and so on. However, MOFs often have large pore size, which restricts the formation of efficient inter- and intramolecular interactions to realize LPL. Herein, a new approach to achieving LPL in MOFs by multifold interpenetration of discrete frameworks is reported. By comparison between threefold- and twofold-interpenetrating MOFs, it was found that the former, which have higher multiplicity and denser frameworks, can be endowed with enhanced inter- and intramolecular interactions, and thus enhanced LPL is obtained. Meanwhile, metal-cluster and heavy-halogen effects could also cause variations in LPL duration and color.

The Effect of Electron Donation and Intermolecular Interactions on Ultralong Phosphorescence Lifetime of 4-Carnoyl Phenylboronic Acids

Purely organic phosphors with persistent room-temperature phosphorescence (RTP) demonstrate promising potential applications in optoelectronic area, bioimaging, and chemical sensing. However, it is still a formidable challenge to further design new organic phosphors due to the unclear mechanism to produce ultralong phosphorescence lifetimes. This paper investigates the correlation between the ultralong phosphorescence lifetime and structure of a series of 4-carbonylphenylboronic acid derivatives in the crystal state. Experimental and calculation results reveal that the electron-donating effect of substituents makes the phosphorescence lifetime longer by not only weakening the vibration relaxation of the excited triplet state but also increasing the energy of T₁. Moreover, numerous intermolecular interactions for reducing nonradiative relaxation and the degree of the π-π stacking for stabilizing the triplet state are beneficial to the persistent RTP. The work is conducted to clarify the structure-property correlation of phosphorescent materials and design new persistent phosphors. Finally, an attempt is completed using phosphorescent materials to design two-dimensional or three-dimensional codes and anticounterfeiting applications.

A Facilely Synthesized Dual-State Emission Platform for Picric Acid Detection and Latent Fingerprint Visualization

To achieve a highly efficient, dual-state emission platform for picric acid (PA) detection and latent fingerprint (LFP) visualization, flexible alkyl chains have been facilely attached to the commercial organic dye 3,4,9,10-perylenetetracarboxylic dianhydride to provide the target perylenetetracarboxylate molecules PTCA-C4, PTCA-C6, and PTCA-C12. Interestingly, all these molecules exhibited impressive fluorescence characteristics with high photoluminescence quantum yields (PLQYs) of around 93.0 % in dilute solution. Also, emissive features were observed in the solid state because close molecular packing is prevented by the alkyl chains, especially for PTCA-C6, which has a high PLQY value of 49.0 %. Benefiting from its impressive fluorescence performance in both solution and as aggregates, PTCA-C6 was used as a dual-state emission platform for PA detection and also LFP visualization. For example, double-responsive fluorescence quenching in solution was observed in PA detection studies, resulting in high quenching constants (K_SV ) and also low limit-of-detection values. Furthermore, the fingerprint powder based on PTCA-C6 also presented an impressive performance on various substrates in terms of fluorescence intensity and resolution, clearly providing the specific fine details of latent fingerprints. These results demonstrate that the facilely synthesized PTCA-C6 with efficient dual-state emission exhibits great potential in the real-world applications of PA detection and LFP visualization.

Mechanochromic Luminescence from Crystals Consisting of Intermolecular Hydrogen-Bonded Sheets

Introduction of functional groups that can form intermolecular hydrogen bonds into highly-emissive luminophores is a promising way to induce mechanochromic luminescence. Herein, we report that a 9,10-bis(phenylethynyl)anthracene derivative featuring two amide groups forms green-emissive crystals based on two-dimensional hydrogen-bonded molecular sheets. Mechanical grinding changed the emission from green to yellow, owing to a transition from a crystalline to an amorphous phase. Infrared spectroscopy revealed that mechanical stimuli disrupted the linear hydrogen-bonding formation. A thermal treatment recovered the original green photoluminescence.

Selective Expression of Chromophores in a Single Molecule: Soft Organic Crystals Exhibiting Full-Colour Tunability and Dynamic Triplet-Exciton Behaviours

Soft luminescent materials are attractive for optoelectronic applications, however, switching dominant chromophores for property enrichment remains a challenge. Herein, we report the first case of a soft organic molecule (DOS) featuring selective expression of chromophores. In response to various external stimuli, different chromophores of DOS can take turns working through conformation changes, exhibiting full-colour emissions peaking from 469 nm to 583 nm from ten individual single crystals. Dynamic triplet-exciton behaviours including thermally activated delayed fluorescence (TADF), room-temperature phosphorescence (RTP), mechanoluminescence (ML), and distinct mechano-responsive luminescence (MRL) can all be realized. This novel designed DOS molecule provides a multifunctional platform for detection of volatile organic compounds (VOCs), multicolour dynamic displays, sensing, anticounterfeiting, and hopefully many others.

Aggregation-induced emission compounds based on 9,10-diheteroarylanthracene and their applications in cell imaging

Four centrosymmetric 9,10-diheteroarylanthracene (DHA) derivatives, including 9,10-dithienylanthracene (DTA), 9,10-difurylanthracene (DFA), 9,10-di-(N-t-butyloxycarboryl-2-pyrryl)anthracene (DBPA), and 9,10-dipyrrylanthracene (DPA) have been synthesized and characterized.

Multiple Photoluminescent Processes from Pyrene Derivatives with Aggregation- and Mechano-Induced Excimer Emission

Two novel pyrene-based isocyanide gold(I) complexes have been designed and synthesized. The different structures lead to distinct and diverse photophysical properties both in solution and in the aggregate state. Multiple photoluminescence, involving monomer emission, locally excited emission and excimer emission, are observed. Notably, an excimer is formed by aggregation in solution and external mechanical stimulation in the solid state, showing aggregation- and mechano-induced excimer emission.

Aggregation-Induced Emission for Visualization in Materials Science

Fluorescent imaging techniques have attracted much attention as a powerful tool to realize the visualization of structural and morphological evolution of various materials. However, the traditional fluorescent dyes usually suffered from aggregation-caused quenching, which severely limits the visualization results. In contrast, aggregation-induced emission (AIE) molecules with high quantum yields in the condensed state showed great opportunities for imaging techniques. In this feature article, recent progresses in visualization with AIE molecules are discussed. Assembly processes including crystallization, gelation process, and dissipative assembly have been observed. To better study information obtained regarding the processes, visualization during reactions, phase transitions, and molecular motions are successfully presented. Based on these successes, AIE molecules were further applied for phase recognition, macro-dispersion evaluation, and damage detection. Finally, we also present the outlook and perspectives, in our opinion, for the development of visualization by AIE molecules.