Bipolare Elektrochemie

Closed Bipolar Electrode Array for Optical Reporting Reaction-Coupled Electrochemical Sensing and Imaging

This review centers on a closed bipolar electrode (BPE) array using an electro-fluorochromism (EFC) or electro-chemiluminescence (ECL) reaction as the reporting reaction. Electrochemical signals at one pole of the closed BPE array can be transduced into the EFC or ECL signals at the opposite pole. Therefore, the current signal of a redox reaction can be easily detected and imaged by monitoring the luminescence signal. Recent developments in closed BPE array-based EFC and ECL sensing and imaging are summarized and discussed in detail. Finally, we consider the challenges and opportunities for improving the spatial resolution of closed BPE array-based electrochemical imaging, and emphasize the important application of this technique to the imaging of cellular activities at the single-cell level.

Bipolar Electrochemistry - A Powerful Tool for Micro/Nano-Electrochemistry

The understanding of areas for "classical" electrochemistry (including catalysis, electrolysis and sensing) and bio-electrochemistry at the micro/nanoscale are focus on the continued performance facilitations or the exploration of new features. In the recent 20 years, a different mode for driving electrochemistry has been proposed, which is called as bipolar electrochemistry (BPE). BPE has garnered attention owing to the interesting properties: (i) its wireless nature facilitates electrochemical sensing and high throughput analysis; (ii) the gradient potential distribution on the electrodes surface is a useful tool for preparing gradient surfaces and materials. These permit BPE to be used for modification and analytical applications on a micro/nanoscale surface. This review aims to introduce the principle and classification of BPE and BPE at micro/nanoscale; sort out its applications in electrocatalysis, electrosynthesis, electrophoresis, power supply and so on; explain the confined BPE and summarize its analytical application for single entities (single cells, single particles and single molecules), and discuss finally the important direction of micro/nanoscale BPE.

Efficient Removal of Mercury from Polluted Aqueous Solutions Using the Wireless Bipolar Electrochemistry Technique

Mercury represents one of the major toxic pollutants in water that affect human and ecosystem. Extensive efforts have been globally invested to remove mercury using various chemical and electrochemical approaches. In this study, I propose the use of bipolar electrochemistry for the first time for mercury depollution process. Mercury(II) is removed from aqueous solutions by direct electrodeposition on millimeter scale graphite rods held in a bipolar setup. By adjusting the strength of the applied electric field and the number of the graphite rods the efficiency of the system can be controlled. This wireless technique allows the use of multiple graphite rod arrays within the bulk cell which resulted in high removal efficiency (98 %) of Hg2+ ions from the polluted solution. The method is straightforward, green, and efficient. The concept can be adapted to remove other heavy metal ions or electrochemically active contaminants from polluted water as long as their reduction potentials are within the water stability window.

Label-Free Electrochemiluminescence Imaging of Single-Cell Adhesions by Using Bipolar Nanoelectrode Array

A label-free and fast approach for positive electrochemiluminescence (ECL) imaging of single cells by bipolar nanoelectrode array is proposed. The reduction of oxygen at a platinized gold nanoelectrode array in a closed bipolar electrochemical system is coupled with an oxidative ECL process at the anodic side. For elevating the ECL imaging contrast of single cells, a driving voltage of -2.0 V is applied to in situ generate oxygen confined beneath cells that is subsequently used for ECL imaging at 1.1 V. High oxygen concentration in the confined space resulting from steric hindrance generates prominent oxygen reduction current at the cathodic side and higher ECL intensity at the anodic side, allowing positive ECL imaging of the cells adhesion region with excellent contrast. Cell morphology and adhesion strength can be successfully imaged with high image acquisition rate. This approach opens a new avenue for label-free imaging of single cells.

Bulk Electrocatalytic NADH Cofactor Regeneration with Bipolar Electrochemistry

Electrochemical regeneration of reduced nicotinamide adenine dinucleotide (NADH) is an extremely important challenge for the electroenzymatic synthesis of many valuable chemicals. Although some important progress has been made with modified electrodes concerning the reduction of NAD⁺ , the scale-up is difficult due to mass transport limitations inherent to large-size electrodes. Here, we propose instead to employ a dispersion of electrocatalytically active modified microparticles in the bulk of a bipolar electrochemical cell. In this way, redox reactions occur simultaneously on all of these individual microelectrodes without the need of a direct electrical connection. The concept is validated by using [Rh(Cp*)(bpy)Cl]⁺ functionalized surfaces, either of carbon felt as a reference material, or carbon microbeads acting as bipolar objects. In the latter case, enzymatically active 1,4-NADH is electroregenerated at the negatively polarized face of the particles. The efficiency of the system can be fine-tuned by controlling the electric field in the reaction compartment and the number of dispersed microelectrodes. This wireless bioelectrocatalytic approach opens up very interesting perspectives for electroenzymatic synthesis in the bulk phase.

Fabrication of Gradient and Patterned Organic Thin Films by Bipolar Electrolytic Micelle Disruption Using Redox-Active Surfactants

Bipolar electrochemistry could be regarded as a powerful approach for selective surface modification due to the beneficial feature that a wirelessly controllable potential distribution on bipolar electrodes (BPEs). Herein we report a bipolar electrolytic micelle disruption (BEMD) system for the preparation of shaped organic films. A U-shaped bipolar electrolytic system with a sigmoidal potential gradient on the BPE gave gradient-thin films including various interesting organic compounds, such as a polymerizable monomer, an organic pigment and aggregation induced emission (AIE) molecules. The gradient feature was characterized by UV-Vis absorption, thickness measurements and surface morphology analysis. Corresponding patterned films were also fabricated using a cylindrical bipolar electrolytic setup that enables site-selective application of the potential on the BPE. Such a facile BEMD approach will open a long-term perspective with respect to organic film preparation.

Bipolar Electrochemiluminescence Imaging: A Way to Investigate the Passivation of Silicon Surfaces

This work depicts the original combination of electrochemiluminescence (ECL) and bipolar electrochemistry (BPE) to map in real-time the oxidation of silicon in microchannels. We fabricated model silicon-PDMS microfluidic chips, optionally containing a restriction, and monitored the evolution of the surface reactivity using ECL. BPE was used to remotely promote ECL at the silicon surface inside microfluidic channels. The effects of the fluidic design, the applied potential and the resistance of the channel (controlled by the fluidic configuration) on the silicon polarization and oxide formation were investigated. A potential difference down to 6 V was sufficient to induce ECL, which is two orders of magnitude less than in classical BPE configurations. Increasing the resistance of the channel led to an increase in the current passing through the silicon and boosted the intensity of ECL signals. Finally, the possibility of achieving electrochemical reactions at predetermined locations on the microfluidic chip was investigated using a patterning of the silicon oxide surface by etched micrometric squares. This ECL imaging approach opens exciting perspectives for the precise understanding and implementation of electrochemical functionalization on passivating materials. In addition, it may help the development and the design of fully integrated microfluidic biochips paving the way for development of original bioanalytical applications.

Electricity-Driven Post-Functionalization of Conducting Polymers

Electrochemical doping of conducting polymers (CPs) generates polarons (radical ionic species) and bipolarons (ionic species) in their backbone via multi-electron transfer between an electrode and the CP. In the electrochemical polymer reaction (ePR), these generated ionic species are regarded as reactive intermediates for further transformation of the chemical structures of CPs. This electrochemical post-functionalization can easily be used to control the degree of reactions by turning a power supply on/off, as well as tuning the applied electrode potential, which leads to fine-tuning of the various properties of the CPs, such as the HOMO/LUMO level and PL properties. This Account summarizes recent developments in the electrochemical post-functionalization of CPs. In particular, we focus on reaction design for the ePR, with respect to the preparation and structure of the precursor polymers, applicable functional groups, efficient reaction conditions, and electrolytic methodologies.

Wireless Coupling of Conducting Polymer Actuators with Light Emission

Combining the actuation of conducting polymers with additional functionalities is an interesting fundamental scientific challenge and increases their application potential. Herein we demonstrate the possibility of direct integration of a miniaturized light emitting diode (LED) in a polypyrrole (PPy) matrix in order to achieve simultaneous wireless actuation and light emission. A light emitting diode is used as a part of an electroactive surface on which electrochemical polymerization allows direct incorporation of the electronic device into the polymer. The resulting free-standing polymer/LED hybrid can be addressed by bipolar electrochemistry to trigger simultaneously oxidation and reduction reactions at its opposite extremities, leading to a controlled deformation and an electron flow through the integrated LED. Such a dual response in the form of actuation and light emission opens up interesting perspectives in the field of microrobotics.

Modulation of Wetting Gradients by Tuning the Interplay between Surface Structuration and Anisotropic Molecular Layers with Bipolar Electrochemistry

A new simple and versatile method for the preparation of surface-wetting gradients is proposed. It is based on the combination of electrode surface structuration introduced by a sacrificial template approach and the formation of a tunable molecular gradient by bipolar electrochemistry. The gradient involves the formation of a self-assembled monolayer on a gold surface by selecting an appropriate thiol molecule and subsequent reductive desorption by means of bipolar electrochemistry. Under these conditions, completion of the reductive desorption process evolves along the bipolar surface with a maximum strength localized at the cathodic edge and a decreasing driving force towards the middle of the surface. The remaining quantity of surface-immobilized thiol, therefore, varies as a function of the axial position, resulting in the formation of a molecular gradient. The surface of the bipolar electrode is characterized at each step of the modification by recording heterogeneous electron transfer. Also, the evolution of static contact angles measured with a water droplet deposited on the surface directly reveals the presence of the wetting gradient, which can be modulated by changing the properties of the thiol. This is exemplified with a long, hydrophobic alkane-thiol and a short, hydrophilic mercaptan.

Electrogenerated Chemiluminescence Reporting on Closed Bipolar Microelectrodes and the Influence of Electrode Size

We report a fundamental study of the use of Ru(bpy)32+-based electrogenerated chemiluminescence (ECL) as an optical reporting system for the detection of redox-active analyte on closed bipolar microelectrodes, focused on gaining an in-depth understanding of the correlation between ECL emission intensity and electrochemical current. We demonstrate the significant effect that the size of the anodic and cathodic poles has on the resulting ECL signal and show how this influences the quantitative detection of analyte on a closed bipolar electrode. By carefully designing the geometry of the bipolar electrode, the detection performance of the system can be tuned to different analyte concentration ranges. We show that through a simple voltammetric study of the individual reactions, one can understand the coupled bipolar behavior and accurately predict the ECL signal response to a range of analyte concentrations, enabling the accurate prediction of calibration curves.