Controlled Carbon Nitride Growth on Surfaces for Hydrogen Evolution Electrodes

Innovative molecularly imprinted electrochemical sensor for the nanomolar detection of Tenofovir as an anti-HIV drug

Tenofovir (TNF) is an antiviral medicine that is utilized to treat the human immunodeficiency virus (HIV). However, its level must be controlled in the human body and environment at the risk of causing kidney and liver problems. Therefore, determining TNF concentration in real samples with more advanced, inexpensive, and accurate sensing systems is essential. In this work, a novel electrochemical nanosensor for TNF determination based on molecularly imprinted polymer (MIP) on the screen-printed electrode modified with functionalized multi-walled carbon nanotubes, graphite carbon nitride, and platinum nanoparticles (MIP-Pt@g-C₃N₄/F-MWCNT/SPE) was constructed through the electro-polymerization approach. The molecularly imprinted polymers were prepared on the electrode surface with TNF as the template molecule and 2-aminophenol (2-AP) as the functional monomer. Moreover, factors that affect sensor response were optimized. Pt@g-C₃N₄/F-MWCNT nanocomposite had an excellent synergistic effect on MIP, allowing rapid and specific identification of the test substance. The results demonstrated that the electro-polymerization of 2-AP supplies large amounts of functional groups for the binding of the template molecules, which remarkably enhances the sensitivity and specific surface area of the MIP sensor. This surface enlargement increased the analyte accessibility to imprinted molecular cavities. Under optimum conditions, the oxidation peak current had a linear relationship with TNF concentration ranging from 0.005 to 0.69 μM with a low detection limit of 0.0030 μM (S/N = 3). The results demonstrated that the designed MIP sensor possesses acceptable sensitivity, repeatability, and reproducibility toward TNF determination. Moreover, the developed sensor was applied to biological and water samples to determine TNF, and satisfactory recovery results of 95.6-104.8% were obtained (RSD less than 10.0%). We confirm that combining as-synthesized nanocomposite Pt@g-C₃N₄/F-MWCNT with MIP improves the limitations of MIP-based nanosensors. The proposed electrode is also compatible with portable potentiostats, allowing on-site measurements and showing tremendous promise as a point-of-care (POC) diagnostic platform.

Development of efficient bi-functional g-C3N4@MOF heterojunctions for water splitting

Highly efficient heterojunctions by combining n-type g-C3N4 and MOFs as bi-functional photoelectrocatalysts towards the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER).

Palladium Nanoparticles Hardwired in Carbon Nanoreactors Enable Continually Increasing Electrocatalytic Activity During the Hydrogen Evolution Reaction

Catalysts typically lose effectiveness during operation, with much effort invested in stabilising active metal centres to prolong their functional lifetime for as long as possible. In this study palladium nanoparticles (PdNP) supported inside hollow graphitised carbon nanofibers (GNF), designated as PdNP@GNF, opposed this trend. PdNP@GNF exhibited continuously increasing activity over 30000 reaction cycles when used as an electrocatalyst in the hydrogen evolution reaction (HER). The activity of PdNP@GNF, expressed as the exchange current density, was always higher than activated carbon (Pd/C), and after 10000 cycles PdNP@GNF surpassed the activity of platinum on carbon (Pt/C). The extraordinary durability and self-improving behaviour of PdNP@GNF was solely related the unique nature of the location of the palladium nanoparticles, that is, at the graphitic step-edges within the GNF. Transmission electron microscopy imaging combined with spectroscopic analysis revealed an orchestrated series of reactions occurring at the graphitic step-edges during electrocatalytic cycling, in which some of the curved graphitic surfaces opened up to form a stack of graphene layers bonding directly with Pd atoms through Pd-C bonds. This resulted in the active metal centres becoming effectively hardwired into the electrically conducting nanoreactors (GNF), enabling facile charge transport to/from the catalytic centres resulting in the dramatic self-improving characteristics of the electrocatalyst.

Sol-Gel Processing of Water-Soluble Carbon Nitride Enables High-Performance Photoanodes*

In spite of the enormous promise that polymeric carbon nitride (PCN) materials hold for various applications, the fabrication of high-quality, binder-free PCN films and electrodes has been a largely elusive goal to date. Here, we tackle this challenge by devising, for the first time, a water-based sol-gel approach that enables facile preparation of thin films based on poly(heptazine imide) (PHI), a polymer belonging to the PCN family. The sol-gel process capitalizes on the use of a water-soluble PHI precursor that allows formation of a non-covalent hydrogel. The hydrogel can be deposited on conductive substrates, resulting in formation of mechanically stable polymeric thin layers. The resulting photoanodes exhibit unprecedented photoelectrochemical (PEC) performance in alcohol reforming and highly selective (∼100 %) conversions with very high photocurrents (>0.25 mA cm-2 under 2 sun) down to <0 V vs. RHE. This enables even effective PEC operation under zero-bias conditions and represents the very first example of a 'soft matter'-based PEC system capable of bias-free photoreforming. The robust binder-free films derived from sol-gel processing of water-soluble PCN thus constitute a new paradigm for high-performance 'soft matter' photoelectrocatalytic systems and pave the way for further applications in which high-quality PCN films are required.

An Overview of the Recent Progress in Polymeric Carbon Nitride Based Photocatalysis

Recently, polymeric carbon nitride (g-C₃ N₄ ) as a proficient photo-catalyst has been effectively employed in photocatalysis for energy conversion, storage, and pollutants degradation due to its low cost, robustness, and environmentally friendly nature. The critical review summarized the recent development, fundamentals, nanostructures design, advantages, and challenges of g-C₃ N₄ (CN), as potential future photoactive material. The review also discusses the latest information on the improvement of CN-based heterojunctions including Type-II, Z-scheme, metal/CN Schottky junctions, noble metal@CN, graphene@CN, carbon nanotubes (CNTs)@CN, metal-organic frameworks (MOFs)/CN, layered double hydroxides (LDH)/CN heterojunctions and CN-based heterostructures for H₂ production from H₂ O, CO₂ conversion and pollutants degradation in detail. The optical absorption, electronic behavior, charge separation and transfer, and bandgap alignment of CN-based heterojunctions are discussed elaborately. The correlations between CN-based heterostructures and photocatalytic activities are described excessively. Besides, the prospects of CN-based heterostructures for energy production, storage, and pollutants degradation are discussed.

Carbon-Based Materials for the Development of Highly Dispersed Metal Catalysts: Towards Highly Performant Catalysts for Fine Chemical Synthesis

Single-atom catalysts (SACs), consisting of metals atomically dispersed on a support, are considered as advanced materials bridging homogeneous and heterogeneous catalysis, representing the catalysis at the limit. The enhanced performance of these catalysts is due to the combination of distinct factors such as well-defined active sites, comprising metal single atoms in different coordination environments also varying its valence state and strongly interacting with the support, in this case porous carbons, maximizing then the metal efficiency in comparison with other metal surfaces consisting of metal clusters and/or metal nanoparticles. The purpose of this review is to summarize the most recent advances in terms of both synthetic strategies of producing porous carbon-derived SACs but also its application to green synthesis of highly valuable compounds, an area in which the homogeneous catalysts are classically used. Porous carbon-derived SACs emerge as a type of new and eco-friendly catalysts with great potential. Different types of carbon forms, such as multi-wall carbon nanotubes (MWCNTs), graphene and graphitic carbon nitride or even others porous carbons derived from Metal–Organic-Frameworks (MOFs) are recognized. Although it represents an area of expansion, experimentally and theoretically, much more future efforts are needed to explore them in green fine chemical synthesis.

Ultrathin 2D Graphitic Carbon Nitride on Metal Films: Underpotential Sodium Deposition in Adlayers for Sodium-Ion Batteries

Efficient and low-cost anode materials for the sodium-ion battery are highly desired to enable more economic energy storage. Effects on an ultrathin carbon nitride film deposited on a copper metal electrode are presented. The combination of effects show an unusually high capacity to store sodium metal. The g-C₃ N₄ film is as thin as 10 nm and can be fabricated by an efficient, facile, and general chemical-vapor deposition method. A high reversible capacity of formally up to 51 Ah g^-1 indicates that the Na is not only stored in the carbon nitride as such, but that carbon nitride activates also the metal for reversible Na-deposition, while forming at the same time an solid electrolyte interface layer avoiding direct contact of the metallic phase with the liquid electrolyte.

Electrochemical sensor based on an electrode modified with porous graphitic carbon nitride nanosheets (C3N4) embedded in graphene oxide for simultaneous determination of ascorbic acid, dopamine and uric acid

Two-dimensional porous graphitic carbon nitride (g-C₃N₄) nanosheets were synthesized by low-cost and direct thermal oxidation. Porous g-C₃N₄ assembled with graphene oxide (GO) was immobilized on a glassy carbon electrode. The sensor was applied to simultaneous determination of ascorbic acid (AA), dopamine (DA) and uric acid (UA) with high performance. Cyclic voltammetry and differential pulse voltammetry were used to investigate electrochemical and electrocatalytic properties. The results indicate that the electrochemical sensor possesses high specific surface area, hierarchical pore structure and excellent signal response to AA, DA and UA. The oxidation potentials are well separated at around 0.15, 0.34 and 0.46 V for AA, DA and UA respectively. The determination limits for AA, DA and UA are 3.7 μM, 0.07 μM and 0.43 μM, respectively. The sensor was applied to tracking the three analytes in spiked serum samples with recovery 95.1~105.5% and relation standard deviations of less than 5%. Graphical abstract Schematic representation of porous graphitic carbon nitride nanosheet embedded in graphene oxide for simultaneous determination of ascorbic acid, dopamine and uric acid.

Salt-Assisted Synthesis of 3D Porous g-C3N4 as a Bifunctional Photo- and Electrocatalyst

Graphitic carbon nitride (g-C₃N₄), characterized with a suitable bandgap, has aroused great interest as a robust and efficient catalyst for solar energy utilization. Herein, we introduce a new strategy to fabricate a three-dimensional (3D) porous g-C₃N₄ by a facile NaCl-assisted ball-milling strategy. The porous structure-induced advantages, such as a higher specific surface area, more efficient charge separation, and faster electron-transfer efficiency, enable the 3D porous g-C₃N₄ to achieve impressive properties as a bifunctional catalyst for both photocatalytic hydrogen evolution and electrocatalytic oxygen evolution reaction (OER). As a result, the 3D porous g-C₃N₄ exhibits a hydrogen evolution rate of 598 μmol h^-1 g^-1 with an apparent quantum yield of 3.31% at 420 nm for photocatalytic H₂ generation, which is much higher than that of the bulk g-C₃N₄. Simultaneously, the porous g-C₃N₄ also presents an attractive OER performance with a low onset potential of 1.47 V (vs reversible hydrogen electrode) in an alkaline electrolyte after rational cobalt-doping. Accordingly, the NaCl-assisted ball-milling strategy paves the way to the rational design of a controllable porous structure.

Designing a Novel Monolayer β-CSe for High Performance Photovoltaic Device: An Isoelectronic Counterpart of Blue Phosphorene

Using the first-principles method, an unmanufactured structure of blue-phosphorus-like monolayer CSe (β-CSe) was predicted to be stable. Slightly anisotropic mechanical characteristics in β-CSe sheet were discovered: it can endure an ultimate stress of 5.6 N/m at 0.1 along an armchair direction, and 5.9 N/m at 0.14 along a zigzag direction. A strain-sensitive transport direction was found in β-CSe, since β-CSe, as an isoelectronic counterpart of blue phosphorene (β-P), also possesses a wide indirect bandgap that is sensitive to the in-plane strain, and its carrier effective mass is strain-dependent. Its indirect bandgap character is robust, except that armchair-dominant strain can drive the indirect-direct transition. We designed a heterojunction by the β-CSe sheet covering α-CSe sheet. The band alignment of the α-CSe/β-CSe interface is a type-II van der Waals p-n heterojunction. An appreciable built-in electric field across the interface, which is caused by the charges transfering from β-CSe slab to α-CSe, renders energy bands bending, and it makes photo-generated carriers spatially well-separated. Accordingly, as a metal-free photocatalyst, α-CSe/β-CSe heterojunction was endued an enhanced solar-driven redox ability for photocatalytic water splitting via lessening the electron-hole-pair recombination. This study provides a fundamental insight regarding the designing of the novel structural phase for high-performance light-emitting devices, and it bodes well for application in photocatalysis.

Polymeric Donor-Acceptor Heterostructures for Enhanced Photocatalytic H2 Evolution without Using Pt Cocatalysts

Polymeric carbon nitride (CN) is a promising material for photocatalytic water splitting. However, CN in its pristine form tends to show moderate activity due to fast recombination of the charge carriers. The design of efficient photocatalytic system is therefore highly desired, but it still remains a great challenge in chemistry. In this work, a pyrene-based polymer able to serve as an electron donor to accelerate the interface charge carrier transfer of CN is presented. The construction of donor-acceptor (D-A) heterojunction was confirmed to significantly restrain the charge recombination and, thus, improve the proton reduction process. This study provides a promising strategy to achieve solar H₂ production in an efficient and low-cost manner.

Robust Carbon Nitride-Based Thermoset Coatings for Surface Modification and Photochemistry

Herein, the convenient visible light-induced photografting of hydroxyl ethyl methacrylate onto graphitic carbon nitride (g-CN) is described, leading to well-dispersible g-CN-based precursor polymers that can be injected. Mixing with citric acid as the cross-linker and heating leads to stable thermoset coatings. The process is versatile and easy to perform, leading to g-CN-based coatings. Moreover, the coating can be further functionalized/modified via grafting of other polymer chains, and the resulting structure is useful as photocatalytic surface or as photoelectrode.

Modified Nanopillar Arrays for Highly Stable and Efficient Photoelectrochemical Water Splitting

Atomically modified graphitic carbon nitride quantum dots (QDs), characterized by strongly increased reactivity and stability, are developed. These are deposited on arrays of TiO2 nanopillars used as a photoanode for the photoelectrochemical water splitting. This photoanode shows excellent stability, with 111 h of continuous work without any performance loss, which outperforms the best-reported results by a factor of 10. Remarkably, our photoanode produces hydrogen even at zero bias. The excellent performance is attributed to the enhancement of photoabsorption, as well as to the promotion of charge separation between TiO2 nanopillars and the QDs.

Carbon Nitride Materials for Water Splitting Photoelectrochemical Cells

Graphitic carbon nitride materials (CNs) have emerged as suitable photocatalysts and heterogeneous catalysts for various reactions thanks to their tunable band gap, suitable energy-band position, high stability under harsh chemical conditions, and low cost. However, the utilization of CN in photoelectrochemical (PEC) and photoelectronic devices is still at an early stage owing to the difficulties in depositing high-quality and homogenous CN layer on substrates, its wide band gap, poor charge-separation efficiency, and low electronic conductivity. In this Minireview, we discuss the synthetic pathways for the preparation of various structures of CN on substrates and their underlying photophysical properties and current photoelectrochemical performance. The main challenges for CN incorporation into PEC cell are described, together with possible routes to overcome the standing limitations toward the integration of CN materials in PEC and other photoelectronic devices.

In situ growth of triazine–heptazine based carbon nitride film for efficient (photo)electrochemical performance

Carbon nitride polymer film with a triazine–heptazine network on FTO as a bifunctional electrode shows boosted (photo)electrochemical performance for water splitting.

Ferric phosphide carbon nanocomposites emerging as highly active electrocatalysts for the hydrogen evolution reaction

This Frontier article highlights the recent development and advances in designing ferric phosphide (FeP) based composite materials for the HER.

A facile approach for the synthesis of Z-scheme photocatalyst ZIF-8/g-C3N4 with highly enhanced photocatalytic activity under simulated sunlight

The enhanced photocatalytic activity of ZIF-8/g-C₃N₄ composites can be attributed to strong interfacial interaction, which promoted the photo-generated electron–hole separation.

Molecular engineering of polymeric carbon nitride: advancing applications from photocatalysis to biosensing and more

Different designs and constructions of molecular structures of carbon nitride for emerging applications, such as biosensing, are discussed.

Recent Advances of Graphitic Carbon Nitride-Based Structures and Applications in Catalyst, Sensing, Imaging, and LEDs

The graphitic carbon nitride (g-C3N4) which is a two-dimensional conjugated polymer has drawn broad interdisciplinary attention as a low-cost, metal-free, and visible-light-responsive photocatalyst in the area of environmental remediation. The g-C3N4-based materials have excellent electronic band structures, electron-rich properties, basic surface functionalities, high physicochemical stabilities and are "earth-abundant." This review summarizes the latest progress related to the design and construction of g-C3N4-based materials and their applications including catalysis, sensing, imaging, and white-light-emitting diodes. An outlook on possible further developments in g-C3N4-based research for emerging properties and applications is also included.

One-Dimensional Earth-Abundant Nanomaterials for Water-Splitting Electrocatalysts

Hydrogen fuel acquisition based on electrochemical or photoelectrochemical water splitting represents one of the most promising means for the fast increase of global energy need, capable of offering a clean and sustainable energy resource with zero carbon footprints in the environment. The key to the success of this goal is the realization of robust earth-abundant materials and cost-effective reaction processes that can catalyze both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), with high efficiency and stability. In the past decade, one-dimensional (1D) nanomaterials and nanostructures have been substantially investigated for their potential in serving as these electrocatalysts for reducing overpotentials and increasing catalytic activity, due to their high electrochemically active surface area, fast charge transport, efficient mass transport of reactant species, and effective release of gas produced. In this review, we summarize the recent progress in developing new 1D nanomaterials as catalysts for HER, OER, as well as bifunctional electrocatalysts for both half reactions. Different categories of earth-abundant materials including metal-based and metal-free catalysts are introduced, with their representative results presented. The challenges and perspectives in this field are also discussed.

Decorating CoP and Pt Nanoparticles on Graphitic Carbon Nitride Nanosheets to Promote Overall Water Splitting by Conjugated Polymers

The splitting of water into H₂ and O₂ using solar energy is one of the key steps in artificial photosynthesis for the future production of renewable energy. Here, we show the first use of CoP and Pt nanoparticles as dual co-catalysts to modify graphitic carbon nitride (g-C₃ N₄ ) polymer to achieve overall water splitting under visible light irradiation. Our findings demonstrate that loading dual co-catalysts on delaminated g-C₃ N₄ imparts surface redox sites on the g-C₃ N₄ nanosheets that can not only promote catalytic kinetics but also promote charge separation and migration in the soft interface, thus improving the photocatalytic efficiency for overall water splitting. This robust, abundant, and stable photocatalyst based on covalent organic frameworks is demonstrated to hold great promise by forming heterojunctions with CoP and Pt for catalyzing the direct splitting of water into stoichiometric H₂ and O₂ using energy from photons.

Graphitic Carbon Nitride Film: An Emerging Star for Catalytic and Optoelectronic Applications

Graphitic carbon nitride (g-CN) is a unique organic semiconductor that has been widely applied as a visible-light-driven photocatalyst. However, these applications are primarily based on g-CN powders. Applications of g-CN in devices are hindered because of difficulties associated with the synthesis of high-quality g-CN films. This work reviews the latest advances in g-CN films. The deposition methods are summarized and the structural, optical, and electronic properties of g-CN films and their applications in catalysis, solar cells, and light-emitting diodes are outlined. Moreover, the challenges remaining in this field are also discussed.

In situ growth of graphitic carbon nitride films on transparent conducting substrates via a solvothermal route for photoelectrochemical performance

Graphitic carbon nitride films werein situgrownviasolvothermal route with significantly improved photoelectrochemical performance.

Improving the surface-enhanced Raman scattering activity of carbon nitride by two-step calcining

The modified g-C₃N₄ substrates were prepared by a two-step calcining method. The morphologies and microstructures of modified g-C₃N₄ were successfully controlled. The modified g-C₃N₄-2 h + Ag substrate exhibited superior SERS activity.

Graphitic carbon nitride “reloaded”: emerging applications beyond (photo)catalysis

Despite being one of the oldest materials described in the chemical literature, graphitic carbon nitride (g-C₃N₄) has just recently experienced a renaissance as a highly active photo/electrocatalyst, and the metal-free polymer was also shown to be have diverse applications in various fields.

Co(OH)2 @PANI Hybrid Nanosheets with 3D Networks as High-Performance Electrocatalysts for Hydrogen Evolution Reaction

Hybrid electrocatalysts with excellent electrocatalytic activity for hydrogen reduction are fabricated using an efficient and facile electrochemical route. The electronic and synergistic effects between Co(OH)2 and polyaniline (PANI) in the composite structure are the key factors that generate the high electrocatalytic activity and excellent stability. A highly efficient, non-precious metal-based flexible electrocatalyst for high-performance electrocatalysts is shown, which reveals a novel route for the design and synthesis of electrocatalysts.