Carbon Dioxide as a Protecting Group: Highly Efficient and Selective Catalytic Access to Cycliccis-Diol Scaffolds

Efficient Synthesis of Cyclic Carbonates from Unsaturated Acids and Carbon Dioxide and their Application in the Synthesis of Biobased Polyurethanes

Bio-derived furan- and diacid-derived cyclic carbonates have been synthesized in high yields from terminal epoxides and CO₂ . Furthermore, four highly substituted terpene-derived cyclic carbonates were isolated in good yields with excellent diastereoselectivity in some cases. Eleven new cyclic carbonates derived from 10-undecenoic acid under mild reaction conditions were prepared, providing the corresponding carbonate products in excellent yields. The catalyst system also performed the conversion of an epoxidized fatty acid n-pentyl ester into a cyclic carbonate under relatively mild reaction conditions (80 °C, 20 bar, 24 h). This bis(cyclic carbonate) was obtained in high yields and with different cis/trans ratios depending on the co-catalyst used. An allyl alcohol by-product was only observed as a minor product when bis(triphenylphosphine)iminium chloride was used as co-catalyst. Finally, two cyclic carbonates were used as building blocks for the preparation of non-isocyanate poly(hydroxy)urethanes by reaction with 1,4-diaminobutane.

Catalytic, Kinetic, and Mechanistic Insights into the Fixation of CO2 with Epoxides Catalyzed by Phenol-Functionalized Phosphonium Salts

A series of hydroxy-functionalized phosphonium salts were studied as bifunctional catalysts for the conversion of CO2 with epoxides under mild and solvent-free conditions. The reaction in the presence of a phenol-based phosphonium iodide proceeded via a first order rection kinetic with respect to the substrate. Notably, in contrast to the aliphatic analogue, the phenol-based catalyst showed no product inhibition. The temperature dependence of the reaction rate was investigated, and the activation energy for the model reaction was determined from an Arrhenius-plot (Ea =39.6 kJ mol-1 ). The substrate scope was also evaluated. Under the optimized reaction conditions, 20 terminal epoxides were converted at room temperature to the corresponding cyclic carbonates, which were isolated in yields up to 99 %. The reaction is easily scalable and was performed on a scale up to 50 g substrate. Moreover, this method was applied in the synthesis of the antitussive agent dropropizine starting from epichlorohydrin and phenylpiperazine. Furthermore, DFT calculations were performed to rationalize the mechanism and the high efficiency of the phenol-based phosphonium iodide catalyst. The calculation confirmed the activation of the epoxide via hydrogen bonding for the iodide salt, which facilitates the ring-opening step. Notably, the effective Gibbs energy barrier regarding this step is 97 kJ mol-1 for the bromide and 72 kJ mol-1 for the iodide salt, which explains the difference in activity.

Zinc Imine Polyhedral Oligomeric Silsesquioxane as a Quattro-Site Catalyst for the Synthesis of Cyclic Carbonates from Epoxides and Low-Pressure CO2

In the present research, the synthesis, spectroscopic characterization, and structural investigations of a unique Zn^II complex of imine-functionalized polyhedral oligomeric silsesquioxane (POSS) is designed, and hereby described, as a catalyst for the synthesis of cyclic carbonates from epoxides and CO₂. The uncommon features of the designed catalytic system is the elimination of the need for a high pressure of CO₂ and the significant shortening of reaction times commonly associated with such difficult transformations like that of styrene oxide to styrene carbonate. Our studies have shown that imine-POSS is able to chelate metal ions like Zn^II to form a unique coordination complex. The silsesquioxane core and the hindrance of the side arms (their steric effect) influence the construction process of the homoleptic Zn₄@POSS-1 complex. The compound was characterized in solution by NMR (¹H, ¹³C, ²⁹Si), ESI-MS, UV/Vis spectroscopy and in the solid state by thermogravimetric/differential thermal analysis (TG-DTA), elemental analysis, diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), cross-polarization magic angle spinning (CP MAS) NMR (¹³C, ²⁹Si) spectroscopy, and X-ray crystallography.

Multifunctional and Sustainable Fe-Iminopyridine Complexes for the Synthesis of Cyclic Carbonates

The use of multifunctional and sustainable Fe catalysts for the formation of cyclic carbonates from epoxides and carbon dioxide at 80 °C and 3 bar pressure is presented. The optimal catalyst possesses a halide counteranion and a hydrogen bond donor to activate the epoxide for ring opening, affording a single-component, cocatalyst-free catalytic system.

An Electrostatically Enhanced Phenol as a Simple and Efficient Bifunctional Organocatalyst for Carbon Dioxide Fixation

An electrostatically enhanced phenol as a simple and competent bifunctional organocatalyst for the atom-economical conversion of epoxides to cyclic carbonates under environmentally benign conditions is described. Incorporating a positively charged center into phenols through a modular one-step synthesis results in a bifunctional system with enhanced acidity and reactivity, capable of epoxide activation, a halide nucleophilic ring-opening process, and CO₂ incorporation in a synergistic fashion. A rational survey of the efficiency of different positively charged phenols and the influence of different parameters, such as temperature, catalyst loading, and the nature of the nucleophile, on catalytic activity was conducted. In addition, the time-dependent conversion of epoxide into the corresponding cyclic carbonate was further explored by FTIR-ATR and ¹ H NMR spectroscopy. This bifunctional catalytic platform is among one of the mildest and most efficient metal-free systems that is capable of converting a variety of epoxides into cyclic carbonates under virtually ambient conditions. The ¹ H NMR titration experiment validated the bifunctional catalytic mechanism wherein both the epoxide activation and the nucleophilic ring-opening process occur in concert en route to carbon dioxide fixation.

Catalytic Hydrogenation of Cyclic Carbonates using Manganese Complexes

Catalytic hydrogenation of cyclic carbonates to diols and methanol was achieved using a molecular catalyst based on earth-abundant manganese. The complex [Mn(CO)2 (Br)[HN(C2 H4 Pi Pr2 )2 ] 1 comprising commercially available MACHO ligand is an effective pre-catalyst operating under relatively mild conditions (T=120 °C, p(H2 )=30-60 bar). Upon activation with NaOt Bu, the formation of coordinatively unsaturated complex [Mn(CO)2 [N(C2 H4 Pi Pr2 )2 )] 5 was spectroscopically verified, which confirmed a kinetically competent intermediate. With the pre-activated complex, turnover numbers up to 620 and 400 were achieved for the formation of the diol and methanol, respectively. Stoichiometric reactions under catalytically relevant conditions provide insight into the stepwise reduction form the CO2 level in carbonates to methanol as final product.

Poly(ethylene glycol)s as Ligands in Calcium-Catalyzed Cyclic Carbonate Synthesis

Herein the use of CaI₂ in combination with poly(ethylene glycol) dimethyl ether (PEG DME 500) as an efficient catalyst system for the addition of CO₂ to epoxides is reported. This protocol is based on a nontoxic and abundant metal in conjunction with a polymeric ligand. Fifteen terminal epoxides were converted at room temperature to give the desired products in yields up to 99 %. Notably, this system was also effective for the synthesis of twelve challenging internal carbonates in yields up to 98 %.

An Efficient and Versatile Lanthanum Heteroscorpionate Catalyst for Carbon Dioxide Fixation into Cyclic Carbonates

A new lanthanum heteroscorpionate complex has shown exceptional catalytic activity for the synthesis of cyclic carbonates from epoxides and carbon dioxide. This catalyst system also promotes the reaction of bio-based epoxides to give an important class of bis(cyclic carbonates) that can be further used for the production of bio-derived non-isocyanate polyurethanes. The catalytic process requires low catalyst loading and mild reaction conditions for the synthesis of a wide range of cyclic carbonates.

Aluminum-Mediated Formation of Cyclic Carbonates: Benchmarking Catalytic Performance Metrics

We report a comparative study on the activity of a series of fifteen binary catalysts derived from various reported aluminum-based complexes. A benchmarking of their initial rates in the coupling of various terminal and internal epoxides in the presence of three different nucleophilic additives was carried out, providing for the first time a useful comparison of activity metrics in the area of cyclic organic carbonate formation. These investigations provide a useful framework for how to realistically valorize relative reactivities and which features are important when considering the ideal operational window of each binary catalyst system.

A Bimetallic Aluminium(Salphen) Complex for the Synthesis of Cyclic Carbonates from Epoxides and Carbon Dioxide

A bimetallic aluminium(salphen) complex is reported as a sustainable, efficient and inexpensive catalyst for the synthesis of cyclic carbonates from epoxides and carbon dioxide. In the presence of this complex and tetrabutylammonium bromide, terminal and internal epoxides reacted at 50 °C and 10 bar carbon dioxide pressure to afford their corresponding cyclic carbonates in yields of 50-94 % and 30-71 % for terminal and internal cyclic carbonates, respectively. Mechanistic studies using deuterated epoxides and an analogous monometallic aluminium(salphen) chloride complex support a mechanism for catalysis by the bimetallic complex, which involves intramolecular cooperative catalysis between the two aluminium centres.

Catalytic Coupling of Carbon Dioxide with Terpene Scaffolds: Access to Challenging Bio-Based Organic Carbonates

The challenging coupling of highly substituted terpene oxides and carbon dioxide into bio-based cyclic organic carbonates catalyzed by Al(aminotriphenolate) complexes is reported. Both acyclic as well as cyclic terpene oxides were used as coupling partners, showing distinct reactivity/selectivity behavior. Whereas cyclic terpene oxides showed excellent chemoselectivity towards the organic carbonate product, acyclic substrates exhibited poorer selectivities owing to concomitant epoxide rearrangement reactions and the formation of undesired oligo/polyether side products. Considering the challenging nature of these coupling reactions, the isolated yields of the targeted bio-carbonates are reasonable and in most cases in the range 50-60 %. The first crystal structures of tri-substituted terpene based cyclic carbonates are reported and their stereoconnectivity suggests that their formation proceeds through a double inversion pathway.

Cavitand-Based Polyphenols as Highly Reactive Organocatalysts for the Coupling of Carbon Dioxide and Oxiranes

A variety of cavitand-based polyphenols was prepared from cheap and accessible aldehyde and resorcinol/pyrogallol reagents to give the respective resorcin[4]- or pyrogallol[4]arenes. The preorganization of the phenolic units allows intra- and intermolecular hydrogen bond (HB) networks that affect both the reactivity and stability of these HB-donor catalysts. Unexpectedly, we found that the resorcin[4]arenes show cooperative catalysis behavior compared to the parent resorcinol in the catalytic coupling of epoxides and CO2 with a significantly higher turnover. At elevated reaction temperatures, the resorcin[4]arene-based catalyst 3 d displays the best catalytic performance with very high turnover numbers and frequencies, combining increased reactivity and stability compared to pyrogallol, and an ample substrate scope. This type of polyphenol structure thus illustrates the importance of a new, highly competitive organocatalyst design to devise sustainable CO2 conversion processes.

Substrate-Controlled Product Divergence: Conversion of CO2 into Heterocyclic Products

Substituted epoxy alcohols and amines allow substrate-controlled conversion of CO2 into a wide range of heterocyclic structures through different mechanistic manifolds. This new approach results in an unusual scope of CO2-derived products by initial activation of CO2 through either the amine or alcohol unit, thus providing nucleophiles for intramolecular epoxy ring opening under mild reaction conditions. Control experiments support the crucial role of the amine/alcohol fragment in this process with the nucleophile-assisted ring-opening step following an SN i pathway, and a 5-exo-tet cyclization, thus leading to heterocyclic scaffolds.

Synthesis of Cyclic Carbonates from Epoxides and Carbon Dioxide by Using Bifunctional One-Component Phosphorus-Based Organocatalysts

Numerous bifunctional organocatalysts were synthesized and tested for the atom-efficient addition of carbon dioxide and epoxides to produce cyclic carbonates. These catalysts are based on phosphonium salts containing an alcohol moiety in the side chain for substrate activation through hydrogen bonding. In the model reaction, converting 1,2-butylene oxide with CO2 , 19 catalysts were tested to determine structure-activity relationships. In total, 28 epoxides were converted with CO2 to give the respective cyclic carbonates in yields of up to 99%. Even at 45 °C, the most active catalyst was able to produce cyclic carbonates selectively in high yields. The carbonates were generally obtained as analytically pure products after simple filtration over silica gel. This single-component catalyst system works under neat and mild reaction conditions and tolerates several useful moieties.