Bifunctional Catalysts Based on m ‐Phenylene‐Bridged Porphyrin Dimer and Trimer Platforms: Synthesis of Cyclic Carbonates from Carbon Dioxide and Epoxides

Organomagnesia: Reversibly High Carbon Dioxide Uptake by Magnesium Pyrazolates

A series of new pyrazolate and mixed pyrazolate/pyrazole magnesium complexes is described and their reactivity toward carbon dioxide is examined. The dimeric complex [Mg(pzt Bu, t Bu)2]2 inserts CO2 instantly and quantitatively forming the tetrameric complex [Mg(CO2·pzt Bu, t Bu)2]4 and monomeric donor-stabilized [Mg(CO2·pzt Bu, t Bu)2(thf)2]. Complexes of the type [Mgx(pzR,R)2 x(HpzR,R)y]n (R = iPr, tBu) engage in similar insertion reactions involving dissociation of the carbamic acid HOOCpzR,R. Even solid polymeric derivatives [Mg(pzR,R)2]n (R = Me, H) react instantaneously and exhaustively with CO2, the resulting [Mg(CO2·pz)2]m featuring a CO2 capacity of 35.7 wt% (8.2 mmol g-1). All described magnesium pyrazolates display completely reversible CO2 uptake in solution and in the solid state, respectively, as monitored via VT 1H NMR and in situ FTIR spectroscopy as well as thermogravimetric analysis. Fluorinated [Mg2(pzCF3,CF3)4(thf)3] does not yield any isolable CO2 insertion product but exhibits the highest activity in the catalytic transformation of epoxides and CO2 to cyclic carbonates.

Catalytic, Kinetic, and Mechanistic Insights into the Fixation of CO2 with Epoxides Catalyzed by Phenol-Functionalized Phosphonium Salts

A series of hydroxy-functionalized phosphonium salts were studied as bifunctional catalysts for the conversion of CO2 with epoxides under mild and solvent-free conditions. The reaction in the presence of a phenol-based phosphonium iodide proceeded via a first order rection kinetic with respect to the substrate. Notably, in contrast to the aliphatic analogue, the phenol-based catalyst showed no product inhibition. The temperature dependence of the reaction rate was investigated, and the activation energy for the model reaction was determined from an Arrhenius-plot (Ea =39.6 kJ mol-1 ). The substrate scope was also evaluated. Under the optimized reaction conditions, 20 terminal epoxides were converted at room temperature to the corresponding cyclic carbonates, which were isolated in yields up to 99 %. The reaction is easily scalable and was performed on a scale up to 50 g substrate. Moreover, this method was applied in the synthesis of the antitussive agent dropropizine starting from epichlorohydrin and phenylpiperazine. Furthermore, DFT calculations were performed to rationalize the mechanism and the high efficiency of the phenol-based phosphonium iodide catalyst. The calculation confirmed the activation of the epoxide via hydrogen bonding for the iodide salt, which facilitates the ring-opening step. Notably, the effective Gibbs energy barrier regarding this step is 97 kJ mol-1 for the bromide and 72 kJ mol-1 for the iodide salt, which explains the difference in activity.

Hollow Zn-Co Based Zeolitic Imidazole Framework as a Robust Heterogeneous Catalyst for Enhanced CO2 Chemical Fixation

The efficient chemical conversion of carbon dioxide (CO₂ ) into value-added fine chemicals is an intriguing but challenging route in sustainable chemistry. Herein, a hollow-structured bimetallic zeolitic imidazole framework composed of Zn and Co as metal centers (H-ZnCo-ZIF) has been successfully prepared via a post-synthetic strategy based on controllable chemical-etching of the preformed solid ZnCo-ZIF in tannic acid. The creation of hollow cavities inside each monocrystalline ZIFs could be achieved without destroying the intrinsic frameworks, as characterized by field-emission scanning electron microscopy, transmission electron microscopy, and X-ray diffraction technologies. The as-synthesized H-ZnCo-ZIF exhibited remarkable catalytic activity in the cycloaddition of CO₂ with epoxides to the corresponding cyclic carbonates, outperforming the solid ZnCo-ZIF analogue due to the improved mass transfer originating from the hollow structure. More importantly, due to stabilization of metal centers in the ZIF framework by the tannic acid shell, H-ZnCo-ZIF exhibited good recyclability, and no activity loss could be observed in six runs. The present study provides a simple and effective strategy to enhance the catalytic performance of ZIFs by creating a hollow structure via chemical etching.

An Electrostatically Enhanced Phenol as a Simple and Efficient Bifunctional Organocatalyst for Carbon Dioxide Fixation

An electrostatically enhanced phenol as a simple and competent bifunctional organocatalyst for the atom-economical conversion of epoxides to cyclic carbonates under environmentally benign conditions is described. Incorporating a positively charged center into phenols through a modular one-step synthesis results in a bifunctional system with enhanced acidity and reactivity, capable of epoxide activation, a halide nucleophilic ring-opening process, and CO₂ incorporation in a synergistic fashion. A rational survey of the efficiency of different positively charged phenols and the influence of different parameters, such as temperature, catalyst loading, and the nature of the nucleophile, on catalytic activity was conducted. In addition, the time-dependent conversion of epoxide into the corresponding cyclic carbonate was further explored by FTIR-ATR and ¹ H NMR spectroscopy. This bifunctional catalytic platform is among one of the mildest and most efficient metal-free systems that is capable of converting a variety of epoxides into cyclic carbonates under virtually ambient conditions. The ¹ H NMR titration experiment validated the bifunctional catalytic mechanism wherein both the epoxide activation and the nucleophilic ring-opening process occur in concert en route to carbon dioxide fixation.

Catalytic Space Engineering of Porphyrin Metal-Organic Frameworks for Combined CO2 Capture and Conversion at a Low Concentration

Porous porphyrin metal-organic frameworks (PMOFs) provide promising platforms for studying CO₂ capture and conversion (C3) owing to their versatility in photoelectric, catalytic, and redox activities and porphyrin coordination chemistry. Herein, we report the C3 application of two PMOFs by engineering the coordination space through the introduction of two catalytic metalloporphyrins doped with rhodium or iridium, Rh-PMOF-1 and Ir-PMOF-1, both of which can serve as heterogeneous catalysts for the chemical fixation of CO₂ into cyclic carbonates with yields of up to 99 %. Remarkably, the catalytic reactions can effectively proceed under low CO₂ concentrations and high yields of 83 % and 73 % can be obtained under 5 % CO₂ in the presence of Rh-PMOF-1 and Ir-PMOF-1, respectively. The synergistic effect of the metalloporphyrin ligand and the Zr₆ O₈ cluster, in combination with the CO₂ concentration effect from the pore space, might account for the excellent catalytic performance of Rh-PMOF-1 under low CO₂ concentration. Recycling tests of Rh-PMOF-1 show negligible loss of catalytic activity after 10 runs.

Charged Metalloporphyrin Polymers for Cooperative Synthesis of Cyclic Carbonates from CO2 under Ambient Conditions

A facile and one-pot synthesis of metalloporphyrin-based ionic porous organic polymers (M-iPOPs) was performed through a typical Yamamoto-Ullmann coupling reaction for the first time. We used various characterization techniques to demonstrate that these strongly polar Al-based materials (Al-iPOP) possessed a relatively uniform microporosity, good swellable features, and a good CO₂ capture capacity. If we consider the particular physicochemical properties, heterogeneous Al-iPOP, which bears both a metal active center and halogen anion, acted as a bifunctional catalyst for the solvent- and additive-free synthesis of cyclic carbonates from various epoxides and CO₂ with an excellent activity and good recyclability under mild conditions. Interestingly, these CO₂ -philic materials could catalyze the cycloaddition reaction smoothly by using simulated flue gas (15 % CO₂ in N₂ , v/v) as a raw material, which indicates that a stable local microenvironment and polymer swellability might promote the transformation. Thus, the introduction of polar ionic liquid units into metalloporphyrin-based porous materials is regarded as a promising new strategy for the chemical conversion of CO₂ .

Aluminum-Mediated Formation of Cyclic Carbonates: Benchmarking Catalytic Performance Metrics

We report a comparative study on the activity of a series of fifteen binary catalysts derived from various reported aluminum-based complexes. A benchmarking of their initial rates in the coupling of various terminal and internal epoxides in the presence of three different nucleophilic additives was carried out, providing for the first time a useful comparison of activity metrics in the area of cyclic organic carbonate formation. These investigations provide a useful framework for how to realistically valorize relative reactivities and which features are important when considering the ideal operational window of each binary catalyst system.

One-Component Aluminum(heteroscorpionate) Catalysts for the Formation of Cyclic Carbonates from Epoxides and Carbon Dioxide

New neutral and zwitterionic chiral NNO-donor scorpionate ligands 1 and 2 were designed to obtain new mononuclear and dinuclear NNO-heteroscorpionate aluminum complexes. Reaction of 1 with [AlR₃ ] (R=Me, Et) in a 1:1 or 1:2 molar ratio afforded the neutral mononuclear alkyl complexes [AlR₂ (κ² -bpzappe)] {R=Me (3), Et (4); bpzappeH=2,2-bis(3,5-dimethylpyrazol-1-yl)-1-[4-(dimethylamino)phenyl]-1-phenylethanol} and bimetallic complexes [{AlR₂ (κ² -bpzappe)}(μ-O){AlR₃ }] [R=Me (5), Et (6)]. By reaction of complexes 3-6 with PhCH₂ Br, mononuclear and dinuclear cationic aluminum complexes [AlR₂ (κ² -bbpzappe)]Br {R=Me (7), Et (8); bbpzappeH=N-benzyl-4-[2,2-bis(3,5-dimethyl-1H-pyrazol-1-yl)-1-hydroxy-1-phenylethyl]-N,N-dimethylbenzenaminium bromide} and [{AlR₂ (κ² -bbpzappe)}(μ-O){AlR₃ }]Br [R=Me (9), Et (10)] were synthesized. Both neutral aluminum complexes in the presence of Bu₄ NBr and cationic aluminum complexes were investigated as catalysts for cyclic carbonate formation from epoxides and carbon dioxide. Amongst them, complex 10 was found to be an efficient one-component catalyst for the synthesis of cyclic carbonates from both monosubstituted and internal epoxides and was shown to have broad substrate scope.

Porous Ionic Polymers as a Robust and Efficient Platform for Capture and Chemical Fixation of Atmospheric CO2

Direct use of atmospheric CO₂ as a C₁ source to synthesize high-value chemicals through environmentally benign processes is of great interest, yet challenging. Porous heterogeneous catalysts that are capable of simultaneously capturing and converting CO₂ are promising candidates for such applications. Herein, a family of organic ionic polymers with nanoporous structure, large surface area, strong affinity for CO₂ , and very high density of catalytic active sites (halide ions) was synthesized through the free-radical polymerization of vinylfunctionalized quaternary phosphonium salts. The resultant porous ionic polymers (PIPs) exhibit excellent activities in the cycloaddition of epoxides with atmospheric CO₂ , outperforming the corresponding soluble phosphonium salt analogues and ranking among the highest of known metal-free catalytic systems. The high CO₂ uptake capacity of the PIPs facilitates the enrichment of CO₂ molecules around the catalytic centers, thereby benefiting its conversion. We have demonstrated for the first time that atmospheric CO₂ can be directly converted to cyclic carbonates at room temperature using a heterogeneous catalytic system under metal-solvent free conditions. Moreover, the catalysts proved to be robust and fully recyclable, demonstrating promising potential for practical utilization for the chemical fixation of CO₂ . Our work thereby paves a way to the advance of PIPs as a new type of platform for capture and conversion of CO₂ .

An organic polymer-grafted ionic liquid as a catalyst for the cycloaddition of CO2 to epoxides

Chemical fixation of CO₂ to a cyclic carbonate catalyzed by benzyl chloride polymer-supported imidazolium ionic liquids.

Development of pyridine based o-aminophenolate zinc complexes as structurally tunable catalysts for CO2 fixation into cyclic carbonates

Structure–reactivity correlation in o-aminophenolate zinc catalysts provides an atom-efficient protocol for the conversion of CO₂ into valuable cyclic carbonates.