Cationic RAFT Polymerization Using ppm Concentrations of Organic Acid

Ultrasensitive miRNA-21 Biosensor Based on Zn(TCPP) PET-RAFT Polymerization Signal Amplification and Multiple Logic Gate Molecular Recognition

Quantitative measurement of microRNAs (miRNAs) is extremely important in plenty of biomedical applications especially cancer diagnosis but remains a great challenge. In this work, we developed a logic gate recognition biosensing platform based on the "trinity" molecular recognition mode for quantifying miRNAs with a detection limit of 4.48 aM, along with a linear range from 0.1 nM to 10 aM under optimal experimental conditions. In order to obtain excellent detection performance, we adopted a Zn(TCPP) photocatalytic electron transfer reversible addition-fragmentation chain transfer (PET-RAFT) polymerization signal amplification strategy. The light-induced PET-RAFT has developed green applications of free radical polymerization in the field of biosensors. This is the first report on the preparation of signal amplification biosensors using PET-RAFT for tumor marker detection. With the outstanding detection performance, we can apply the sensor system to the early screening of lung cancer patients.

Synthesis and Degradation of Vinyl Polymers with Evenly Distributed Thioacetal Bonds in Main Chains: Cationic DT Copolymerization of Vinyl Ethers and Cyclic Thioacetals

We report a novel method to synthesize degradable poly(vinyl ether)s with cleavable thioacetal bonds periodically arranged in the main chains using controlled cationic copolymerization of vinyl ethers with a 7-membered cyclic thioacetal (7-CTA) via degenerative chain transfer (DT) to the internal thioacetal bonds. The thioacetal bonds, which are introduced into the main chain by cationic ring-opening copolymerization of 7-CTA with vinyl ethers, serve as in-chain dormant species to allow homogeneous propagation of vinyl ethers for all internal segments to afford copolymers with controlled overall and segmental molecular weights. The obtained polymers can be degraded into low- and controlled-molecular-weight polymers with narrow molecular weight distributions via hydrolysis. Various vinyl ethers with hydrophobic, hydrophilic, and functional pendants are available. Finally, one-pot synthesis of multiblock copolymers and their degradation into diblock copolymers are also achieved.

Photoinduced Controlled/Living Polymerizations

The application of photochemistry in polymer synthesis is of interest due to the unique possibilities offered compared to thermochemistry, including topological and temporal control, rapid polymerization, sustainable low-energy processes, and environmentally benign features leading to established and emerging applications in adhesives, coatings, adaptive manufacturing, etc. In particular, the utilization of photochemistry in controlled/living polymerizations often offers the capability for precise control over the macromolecular structure and chain length in addition to the associated advantages of photochemistry. Herein, the latest developments in photocontrolled living radical and cationic polymerizations and their combinations for application in polymer syntheses are discussed. This Review summarizes and highlights recent studies in the emerging area of photoinduced controlled/living polymerizations. A discussion of mechanistic details highlights differences as well as parallels between different systems for different polymerization methods and monomer applicability.

Controlled Cationic Polymerization Using RAFT Agents with Selenonium Cations as Metal-Free Lewis Acids: From Homogeneous to Heterogeneous Catalysis

Living cationic polymerization is a well-known technique, but it is generally limited by strict operating conditions. Here, a series of selenonium cations was used as a new class of catalysts...

Photoinduced Free Radical Promoted Cationic RAFT Polymerization toward "Living" 3D Printing

Three-dimensional (3D) printing utilizing controlled polymerization systems is emerging as a powerful approach to fabricate "living" objects, which can be further modified with various functionalities. Here, we report photoinduced free radical-promoted cationic reversible addition-fragmentation chain transfer (RAFT) polymerization under broad wavelengths from ultraviolet (UV) to near-infrared (NIR) light. A commercially available iron catalyst, cyclopentadienyl iron dicarbonyl dimer (Fe₂(Cp)₂(CO)₄), was used as the photocatalyst, and several diphenyliodonium salts were examined as oxidants. Various poly(vinyl ether)s with controlled molecular weights and a narrow dispersity (1.06-1.32) were prepared through this method. Relatively high chain-end fidelity can be observed and has been demonstrated by successful chain-extension experiments. In addition, benefiting from the penetrating ability of NIR light, 3D objects with different thicknesses were achieved by employing stereolithography-based 3D printing techniques. Furthermore, the postfunctionalization of these 3D printed objects with fluorescent monomers provides a facile method to build 3D objects with complex functionality and potential applications in anticounterfeiting materials.

Controlling Polymer Molecular Weight Distribution through a Latent Mediator Strategy with Temporal Programming

Polymer molecular weight distribution (MWD) is a key parameter of polymers. Here we present a robust method for controlling polymer MWD in controlled cationic polymerizations. A latent mediator strategy was designed and combined with temporal programming to regenerate mediators at different times during polymerization. Both the breadths and shapes of MWD curves were tuned easily by adjusting an external light source. Bimodal, trimodal, and tetramodal distributions were obtained, and the breadths could be varied from 1.06 to 2.09. Polymers with different MWDs prepared by this method had good chain end fidelity, which was demonstrated with successful chain-extension experiments. In addition, the introduction of temporal programming with a computer-controlled single chip for the light source opened an avenue for the use of artificial intelligence in polymer synthesis.

Manganese-Catalyzed Batch and Continuous Flow Cationic RAFT Polymerization Induced by Visible Light

We present a robust manganese-catalyzed cationic reversible addition-fragmentation chain transfer (RAFT) polymerization induced by visible light. Well-defined poly(vinyl ether)s with controlled molecular weight and molecular weight distributions (MWDs) can be conveniently prepared at room temperature without monomer purification. The commercially available manganese carbonyl bromide is used as the photocatalyst for cationic RAFT polymerization. Moreover, this method has been further applied in both batch and continuous flow systems, providing a visible light induced flow cationic polymerization under mild conditions.

Hydrogen Bond Donor Catalyzed Cationic Polymerization of Vinyl Ethers

The synthesis of high-molecular-weight poly(vinyl ethers) under mild conditions is a significant challenge, since cationic polymerization reactions are highly sensitive to chain-transfer and termination events. We identified a novel and highly effective hydrogen bond donor (HBD)-organic acid pair that can facilitate controlled cationic polymerization of vinyl ethers under ambient conditions with excellent monomer compatibility. Poly(vinyl ethers) of molar masses exceeding 50 kg mol-1 can be produced within 1 h without elaborate reagent purification. Modification of the HBD structure allowed tuning of the polymerization rate, while DFT calculations helped elucidate crucial intermolecular interactions between the HBD, organic acid, and polymer chain end.

Near-Infrared, Light-Induced Cationic and Radical RAFT Polymerization Catalyzed by Iron Complex

A near-infrared (NIR) light induced controlled cationic polymerization is presented here. The halide abstraction reaction between the cyclopentadienyl iron dicarbonyl dimer (Fe₂(Cp)₂(CO)₄) and an organic halide is utilized to generate initial radicals or cations under mild conditions, which can be further combined with both radical and cationic reversible addition-fragmentation chain transfer (RAFT) polymerization. Well-defined poly(vinyl ether)s and polyacrylates are prepared successfully under NIR light by this method. The excellent penetration ability of NIR light through thick barriers has been verified by polymerization in the presence of an A4 paper. In addition, iron-based radical polymerization has been used for three-dimensional (3D) printing to fabricate materials with different thicknesses.

Switchable Reversible Addition-Fragmentation Chain Transfer (RAFT) Polymerization with the Assistance of Azobenzenes

Modulating controlled radical polymerization is an interesting and important issue. Herein, modulating RAFT polymerization employing photosensitive azobenzenes is achieved. In the presence of azobenzenes and with visible light off, RAFT polymerization runs smoothly and follows a pseudo-first-order kinetics. In contrast, with light on, RAFT polymerization is greatly decelerated or quenched depending on the type and concentration of azobenzenes. Switchable RAFT polymerization of different (meth)acrylate monomers alternatively with light off and on is demonstrated. A mechanism of photoregulating RAFT polymerization involving radical quenching by azobenzenes is proposed.

Enhancing Temporal Control and Enabling Chain-End Modification in Photoregulated Cationic Polymerizations by Using Iridium-Based Catalysts

Gaining temporal control over chain growth is a key challenge in the enhancement of controlled living polymerizations. Though research on photocontrolled polymerizations is still in its infancy, it has already proven useful in the development of previously inaccessible materials. Photocontrol has now been extended to cationic polymerizations using 2,4,6-triarylpyrylium salts as photocatalysts. Despite the ability to stop polymerization for a short time, monomer conversion was observed over long dark periods. Improved catalyst systems based on Ir complexes give optimal temporal control over chain growth. The excellent stability of these complexes and the ability to tune the excited and ground state redox potentials to regulate the number of monomer additions per cation formed allows polymerization to be halted for more than 20 hours. The excellent stability of these iridium catalysts in the presence of more nucleophilic species enables chain-end functionalization of these polymers.

Electro-Controlled Living Cationic Polymerization

Cationic polymerizations have long been industrialized; however, stimulus-regulated cationic polymerization remains to be developed. An electrochemically controlled living cationic polymerization is presented for the first time. In the presence of external potential and organic-based electrocatalyst, a series of monomers can be polymerized under a cationic chain-transfer mechanism. The resulting polymers exhibit well-defined molecular mass, narrow dispersity, and good chain-end fidelity. By controlling the external potential to switch the electrocatalyst between its oxidized and reduced states, ON/OFF polymerization can be achieved. This method is a versatile way to a large range of monomers, including vinyl ether-type and p-substituted styrene-type monomers. Given the sustainability feature and broad interest of electrochemical synthetic techniques, we envisaged that this method would lead a new direction of external regulated living ionic polymerization.

Cationic Polymerization: From Photoinitiation to Photocontrol

During the last 40 years, researchers investigating photoinitiated cationic polymerizations have delivered tremendous success in both industrial and academic settings. A myriad of photoinitiating systems have been developed, thus allowing polymerization of a broad array of monomers (e.g., epoxides, vinyl ethers, alkenes, cyclic ethers, and lactones) under practical, inexpensive, and environmentally benign conditions. More recently, owing to progress in photoredox catalysis, photocontrolled cationic polymerization has emerged as a means to precisely regulate polymer chain growth. This Minireview provides a concise historical perspective on cationic polymerization induced by light and discusses the latest advances in both photoinitiated and photocontrolled processes. The latter are exciting new directions for the field that will likely impact industries ranging from micropatterning to the synthesis of complex biomaterials and sequence-controlled polymers.

Triflic Acid-Catalyzed Enynes Cyclization: A New Strategy beyond Electrophilic π-Activation

The cyclization of enynes, catalyzed by a transition metal, represents a powerful tool to construct an array of cyclic compounds through electrophilic π-activation. In this paper, we disclose a new and efficient strategy for enynes cyclization catalyzed by triflic acid. The salient features of this transformation includes a broad substrate scope, metal free synthesis, open flask and mild conditions, good yields, ease of operation, low catalyst loading, and easy scale-up to gram scale. A preliminary mechanism study demonstrated that the activation model of the reaction was σ-activation, which is different from the transition-metal-catalyzed enynes cyclization. Our strategy affords a complementary method to the traditional strategies, which use transition-metal catalysts.