Enhancement of Sodium Ion Battery Performance Enabled by Oxygen Vacancies

Etching-Induced Surface Reconstruction of NiMoO4 for Oxygen Evolution Reaction

Rational reconstruction of oxygen evolution reaction (OER) pre-catalysts and performance index of OER catalysts are crucial but still challenging for universal water electrolysis. Herein, we develop a double-cation etching strategy to tailor the electronic structure of NiMoO4, where the prepared NiMoO4 nanorods etched by H2O2 reconstruct their surface with abundant cation deficiencies and lattice distortion. Calculation results reveal that the double cation deficiencies can make the upshift of d-band center for Ni atoms and the active sites with better oxygen adsorption capacity. As a result, the optimized sample (NMO-30M) possesses an overpotential of 260 mV at 10 mA cm-2 and excellent long-term durability of 162 h. Importantly, in situ Raman test reveals the rapid formation of high-oxidation-state transition metal hydroxide species, which can further help to improve the catalytic activity of NiMoO4 in OER. This work highlights the influence of surface remodification and shed some light on activating catalysts.

Vacancy Modulating Co3 Sn2 S2 Topological Semimetal for Aqueous Zinc-Ion Batteries

Weyl semimetals (WSMs) with high electrical conductivity and suitable carrier density near the Fermi level are enticing candidates for aqueous Zn-ion batteries (AZIBs), meriting from topological surface states (TSSs). We propose a WSM Co₃ Sn₂ S₂ cathode for AZIBs showing a discharge plateau around 1.5 V. By introducing Sn vacancies, extra redox peaks from the Sn⁴⁺ /Sn²⁺ transition appear, which leads to more Zn²⁺ transfer channels and active sites promoting charge-storage kinetics and Zn²⁺ storage capability. Co₃ Sn_1.8 S₂ achieves a specific energy of 305 Wh kg^-1 (0.2 Ag^-1 ) and a specific power of 4900 Wkg^-1 (5 Ag^-1 ). Co₃ Sn_1.8 S₂ and Zn_x Co₃ Sn_1.8 S₂ benefit from better conductivity at lower temperatures; the quasi-solid Co₃ Sn_1.8 S₂ //Zn battery delivers 126 mAh g^-1 (0.6 Ag^-1 ) at -30 °C and a cycling stability over 3000 cycles (2 Ag^-1 ) with 85 % capacity retention at -10 °C.

Recent progress of defect chemistry on 2D materials for advanced battery anodes

The rational design of anode materials plays a significant factor in harnessing energy storage. With an in-depth insight into the relationships and mechanisms that underlie the charge and discharge process of two-dimensional (2D) anode materials. The efficiency of rechargeable batteries has significantly been improved through the implementation of defect chemistry on anode materials. This mini review highlights the recent progress achieved in defect chemistry on 2D materials for advanced rechargeable battery electrodes, including vacancies, chemical functionalization, grain boundary, Stone Wales defects, holes and cracks, folding and wrinkling, layered von der Waals (vdW) heterostructure in 2D materials. The defect chemistry on 2D materials provides numerous features such as a more active adsorption sites, great adsorption energy, better ions-diffusion and therefore higher ion storage, which enhances the efficiency of the battery electrode.

Integration of Oxygen-Vacancy-Rich NiFe-Layered Double Hydroxide onto Silicon as Photoanode for Enhanced Photoelectrochemical Water Oxidation

Photoelectrochemical (PEC) water splitting has the potential to efficiently convert intermittent solar energy into storable hydrogen fuel. However, poor charge separation and transfer ability as well as sluggish surface oxygen evolution reaction (OER) kinetics of the photoelectrode severely hinder the advance in PEC performance. Herein, a facile electrodeposition method was used to integrate Mo-doped NiFe-layered double hydroxide onto a NiOx /Ni-protected Si photoanode for enhanced PEC water oxidation. Mo doping contributed to an increased amount of oxygen vacancies, whereas a dynamic surface self-reconstruction was induced by Mo leaching under PEC OER conditions. This led to enhanced PEC performance with an onset potential of 0.87 V vs. reversible hydrogen electrode (RHE), a photocurrent density of 39.3 mA cm-2 at 1.23 V vs. RHE, a fill factor of 0.38, and a solar-to-oxygen conversion efficiency of 5.3 %, along with a stability of 130 h continuous PEC reaction. The performance was superior to that of the undoped NiFe-LDH/NiOx /Ni/Si (4.3 %), which was attributed to the elevated interface charge separation, fast charge transfer, and accelerated OER kinetics.

Recent Progress on Molybdenum Oxides for Rechargeable Batteries

Diminishing fossil-fuel resources and a rise in energy demands has required the pursuit of sustainable and rechargeable energy-storage materials, including batteries and supercapacitors, the electrochemical properties of which depend largely on the electrode materials. In recent decades, numerous electrode materials with excellent electrochemical energy-storage capabilities, long life spans, and environmentally acceptable qualities have been developed. Among existing materials, molybdenum oxides containing MoO₃ and MoO₂ , as well as their composites, are very fascinating contenders for competent energy-storage devices because of their exceptional physicochemical properties, such as thermal stability, high theoretical capability, and mechanical strength. This Minireview mainly focuses on the latest progress for the use of molybdenum oxides as electrode materials for lithium-ion batteries; sodium-ion batteries; and other novel batteries, such as lithium-sulfur batteries, lithium-oxygen batteries, and newly developed hydrogen-ion batteries, with a focus on studies of the reaction mechanism, design of the electrode structures, and improvement of the electrochemical properties.

Encapsulation of CoS x Nanocrystals into N/S Co-Doped Honeycomb-Like 3D Porous Carbon for High-Performance Lithium Storage

A honeycomb-like 3D N/S co-doped porous carbon-coated cobalt sulfide (CoS, Co9S8, and Co1-x S) composite (CS@PC) is successfully prepared using polyacrylonitrile (PAN) as the nitrogen-containing carbon source through a facile solvothermal method and subsequent in situ conversion. As an anode for lithium-ion batteries (LIBs), the CS@PC composite exhibits excellent electrochemical performance, including high reversible capacity, good rate capability, and cyclic stability. The composite electrode delivers specific capacities of 781.2 and 466.0 mAh g-1 at 0.1 and 5 A g-1, respectively. When cycled at a current density of 1 A g-1, it displays a high reversible capacity of 717.0 mAh g-1 after 500 cycles. The ability to provide this level of performance is attributed to the unique 3D multi-level porous architecture with large electrode-electrolyte contact area, bicontinuous electron/ion transport pathways, and attractive structure stability. Such micro-/nanoscale design and engineering strategies may also be used to explore other nanocomposites to boost their energy storage performance.

Redox Chemistry of Molybdenum Trioxide for Ultrafast Hydrogen-Ion Storage

Hydrogen ions are ideal charge carriers for rechargeable batteries due to their small ionic radius and wide availability. However, little attention has been paid to hydrogen-ion storage devices because they generally deliver relatively low Coulombic efficiency as a result of the hydrogen evolution reaction that occurs in an aqueous electrolyte. Herein, we successfully demonstrate that hydrogen ions can be electrochemically stored in an inorganic molybdenum trioxide (MoO₃ ) electrode with high Coulombic efficiency and stability. The as-obtained electrode exhibits ultrafast hydrogen-ion storage properties with a specific capacity of 88 mA hg^-1 at an ultrahigh rate of 100 C. The redox reaction mechanism of the MoO₃ electrode in the hydrogen-ion cell was investigated in detail. The results reveal a conversion reaction of the MoO₃ electrode into H_0.88 MoO₃ during the first hydrogen-ion insertion process and reversible intercalation/deintercalation of hydrogen ions between H_0.88 MoO₃ and H_0.12 MoO₃ during the following cycles. This study reveals new opportunities for the development of high-power energy storage devices with lightweight elements.

Robust SnO2-x Nanoparticle-Impregnated Carbon Nanofibers with Outstanding Electrochemical Performance for Advanced Sodium-Ion Batteries

The sluggish sodium reaction kinetics, unstable Sn/Na₂ O interface, and large volume expansion are major obstacles that impede practical applications of SnO₂ -based electrodes for sodium-ion batteries (SIBs). Herein, we report the crafting of homogeneously confined oxygen-vacancy-containing SnO_2-x nanoparticles with well-defined void space in porous carbon nanofibers (denoted SnO_2-x /C composites) that address the issues noted above for advanced SIBs. Notably, SnO_2-x /C composites can be readily exploited as the working electrode, without need for binders and conductive additives. In contrast to past work, SnO_2-x /C composites-based SIBs show remarkable electrochemical performance, offering high reversible capacity, ultralong cyclic stability, and excellent rate capability. A discharge capacity of 565 mAh g^-1 at 1 A g^-1 is retained after 2000 cycles.

Engineering Fast Ion Conduction and Selective Cation Channels for a High-Rate and High-Voltage Hybrid Aqueous Battery

The rechargeable aqueous metal-ion battery (RAMB) has attracted considerable attention due to its safety, low costs, and environmental friendliness. Yet the poor-performance electrode materials lead to a low feasibility of practical application. A hybrid aqueous battery (HAB) built from electrode materials with selective cation channels could increase the electrode applicability and thus enlarge the application of RAMB. Herein, we construct a high-voltage K-Na HAB based on K₂ FeFe(CN)₆ cathode and carbon-coated NaTi₂ (PO₄ )₃ (NTP/C) anode. Due to the unique cation selectivity of both materials and ultrafast ion conduction of NTP/C, the hybrid battery delivers a high capacity of 160 mAh g^-1 at a 0.5 C rate. Considerable capacity retention of 94.3 % is also obtained after 1000 cycles at even 60 C rate. Meanwhile, high energy density of 69.6 Wh kg^-1 based on the total mass of active electrode materials is obtained, which is comparable and even superior to that of the lead acid, Ni/Cd, and Ni/MH batteries.

Black Anatase Titania with Ultrafast Sodium-Storage Performances Stimulated by Oxygen Vacancies

Nanostructured black anatase titania with oxygen vacancies (OVs) is efficiently obtained and employed as an anode in sodium-ion batteries (SIBs) for the first time. The incorporation of OVs into TiO2 is demonstrated to render considerably enhanced-rate performances, higher initial capacities, and an accelerated electrochemical activation process during cycling, derived from the boosted intrinsic electric conductivity and improved kinetics of Na uptake. Bestowed with the integrated merits of OVs and shortened Na ion diffusion length in the nanostructure, black titania delivers a reversible specific capacity of 207.6 mAh g(-1) at 0.2 C, retains 99.1% over 500 cycles at 1 C stably, and still maintains 91.2 mAh g(-1) even at the high rate of 20 C. Density functional theory (DFT) calculations suggest that the lower sodiation energy barrier of anatase with OVs enables a more favorable Na intercalation into black anatase. Thus, it is of great significance to introduce OVs into TiO2 to stimulate ultrafast and durable sodium-storage properties, which also offers a potential strategy to project more superior electrodes, utilizing internal defects.